modify nano 2.4inch driver

NANO24-show

@@ -20,14 +20,14 @@ fi
 sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
 sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
 sudo echo "enable_uart=1" >> ./boot/config.txt.bak
-sudo echo "dtoverlay=tft7789:rotate=270" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=tft7789:rotate=90" >> ./boot/config.txt.bak
 sudo echo "dtoverlay=ft6236" >> ./boot/config.txt.bak
 sudo echo "gpio=18=op,dh" >> ./boot/config.txt.bak
 sudo cp -rf ./boot/config.txt.bak /boot/config.txt
 
 sudo cp ./usr/ft6236.dtb /boot/overlays/ft6236.dtbo
 
-sudo cp -rf ./usr/99-calibration.conf-nano24-270  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-calibration.conf-nano24-90  /etc/X11/xorg.conf.d/99-calibration.conf
 sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
 #if test "$root_dev" = "/dev/mmcblk0p7";then
 #sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
@@ -37,7 +37,7 @@ sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
 sudo cp ./usr/inittab /etc/
 #sudo cp ./boot/config-32.txt /boot/config.txt
 sudo touch ./.have_installed
-echo "gpio:resistance:nano24:270:320:240" > ./.have_installed
+echo "gpio:resistance:nano24:90:320:240" > ./.have_installed
 #evdev install
 #nodeplatform=`uname -n`
 #kernel=`uname -r`

usr/99-calibration.conf-nano24-0

@@ -1,7 +1,7 @@
 Section "InputClass"
         Identifier      "calibration"
-        MatchProduct    "Goodix Capacitive TouchScreen"
-        Option  "Calibration"   "240 0 320 0"
+        MatchProduct    "generic ft5x06 (11)"
+        Option  "Calibration"   "0 239 0 319"
         Option  "SwapAxes"      "0"
         Option "EmulateThirdButton" "1"
         Option "EmulateThirdButtonTimeout" "1000"

usr/99-calibration.conf-nano24-180

@@ -1,7 +1,7 @@
 Section "InputClass"
         Identifier      "calibration"
-        MatchProduct    "Goodix Capacitive TouchScreen"
-        Option  "Calibration"   "0 240 0 320"
+        MatchProduct    "generic ft5x06 (11)"
+        Option  "Calibration"   "239 0 319 0"
         Option  "SwapAxes"      "0"
         Option "EmulateThirdButton" "1"
         Option "EmulateThirdButtonTimeout" "1000"

usr/99-calibration.conf-nano24-270

@@ -1,7 +1,7 @@
 Section "InputClass"
         Identifier      "calibration"
         MatchProduct    "generic ft5x06 (11)"
-        Option  "Calibration"   "319 0 0 239"
+        Option  "Calibration"   "0 239 319 0"
         Option  "SwapAxes"      "1"
         Option "EmulateThirdButton" "1"
         Option "EmulateThirdButtonTimeout" "1000"

usr/99-calibration.conf-nano24-90

@@ -1,7 +1,7 @@
 Section "InputClass"
         Identifier      "calibration"
-        MatchProduct    "Goodix Capacitive TouchScreen"
-        Option  "Calibration"   "0 240 320 0"
+        MatchProduct    "generic ft5x06 (11)"
+        Option  "Calibration"   "239 0 0 319"
         Option  "SwapAxes"      "1"
         Option "EmulateThirdButton" "1"
         Option "EmulateThirdButtonTimeout" "1000"