LibrePilot/flight/targets/boards/coptercontrol/board-info.mk

BOARD_TYPE          := 0x04
BOARD_REVISION      := 0x02
BOOTLOADER_VERSION  := 0x04
HW_TYPE             := 0x01

MCU                 := cortex-m3
CHIP                := STM32F103CBT
BOARD               := STM32103CB_CC_Rev1
MODEL               := MD
MODEL_SUFFIX        := _CC

OPENOCD_JTAG_CONFIG := foss-jtag.revb.cfg
OPENOCD_CONFIG      := stm32f1x.cfg

# Note: These must match the values in link_$(BOARD)_memory.ld
BL_BANK_BASE        := 0x08000000  # Start of bootloader flash
BL_BANK_SIZE        := 0x00003000  # Should include BD_INFO region
FW_BANK_BASE        := 0x08003000  # Start of firmware flash
FW_BANK_SIZE        := 0x0001D000  # Should include FW_DESC_SIZE

FW_DESC_SIZE        := 0x00000064

OSCILLATOR_FREQ     :=   8000000
build: refactor fw, bl and bu rules - New macros for fw, bl and bu rules in top-level make - Per-board info factored into make/board//board-info.mk - Per-board info now shared btw. fw, bl and blupd for each board - BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION, HW_TYPE - MCU, CHIP, BOARD, MODEL, MODEL_SUFFIX - START_OF_BL_CODE, START_OF_FW_CODE - blupd_ goals renamed to bu_* - all_blupd goal renamed to all_bu - firmware goals renamed to fw_, board name goals are preserved - bu__program now writes updater to correct address for all boards - BL updater firmware builds now produce .opf format including version info blob. - BL updater firmware name now includes board name. - INS makefile brought up to date w.r.t. linker scripts 2011-05-23 21:11:53 +02:00			`BOARD_TYPE := 0x04`
Bump the board revision up to two for coptercontrol 3d 2012-01-20 21:37:58 +01:00			`BOARD_REVISION := 0x02`
OP-874 merge of amorale/OP-874_gcs_rescue_erase_settings in next. +review OPReview-421 2013-04-08 01:09:31 +02:00			`BOOTLOADER_VERSION := 0x04`
build: refactor fw, bl and bu rules - New macros for fw, bl and bu rules in top-level make - Per-board info factored into make/board//board-info.mk - Per-board info now shared btw. fw, bl and blupd for each board - BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION, HW_TYPE - MCU, CHIP, BOARD, MODEL, MODEL_SUFFIX - START_OF_BL_CODE, START_OF_FW_CODE - blupd_ goals renamed to bu_* - all_blupd goal renamed to all_bu - firmware goals renamed to fw_, board name goals are preserved - bu__program now writes updater to correct address for all boards - BL updater firmware builds now produce .opf format including version info blob. - BL updater firmware name now includes board name. - INS makefile brought up to date w.r.t. linker scripts 2011-05-23 21:11:53 +02:00			`HW_TYPE := 0x01`

			`MCU := cortex-m3`
			`CHIP := STM32F103CBT`
			`BOARD := STM32103CB_CC_Rev1`
			`MODEL := MD`
			`MODEL_SUFFIX := _CC`

build: use board-specific JTAG interface for openocd Removes hard-coding of JTAG interface config in the <board>_program make macros. This allows the use of STLINKv2 for F4 boards while continuing to use the FOSS JTAG revB on F1 boards. 2012-02-25 18:35:29 +01:00			`OPENOCD_JTAG_CONFIG := foss-jtag.revb.cfg`
openocd: collapse JTAG rules for STM32F1 and STM32F2 2011-08-27 16:43:02 +02:00			`OPENOCD_CONFIG := stm32f1x.cfg`

build: define bootloader and firmware bank spans The board-info.mk files now define the start and size of the bootloader and the firmware banks. 2011-05-24 06:08:03 +02:00			`# Note: These must match the values in link_$(BOARD)_memory.ld`
			`BL_BANK_BASE := 0x08000000 # Start of bootloader flash`
			`BL_BANK_SIZE := 0x00003000 # Should include BD_INFO region`
			`FW_BANK_BASE := 0x08003000 # Start of firmware flash`
			`FW_BANK_SIZE := 0x0001D000 # Should include FW_DESC_SIZE`

			`FW_DESC_SIZE := 0x00000064`
Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz). Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets. This allows for custom SystemInit functions where necessary. 2013-05-15 05:58:37 +02:00
			`OSCILLATOR_FREQ := 8000000`