LibrePilot/ground/ground.pro

#
# Top level Qt-Creator project file for OpenPilot GCS
# Copyright (c) 2009-2013, The OpenPilot Team, http://www.openpilot.org
#
# This meta-project allows qt-creator users to open and configure a
# single project and build all required software to produce the GCS.
# This includes regenerating all uavobject-synthetic files.
#
# NOTE: to use this meta-project you MUST perform these steps once
# for each source tree checkout:
# - Open <top>/ground/ground.pro in qt-creator
# - Select the "Projects" tab
# - Under Build Settings/General heading activate "Shadow build"
# - Set "Build directory" below to <top>/build
# Here <top> = the full path to the base of your git source tree which
# should contain "flight", "ground", etc.
#
# NOTE: only debug qt-creator builds are supported on Windows.
#       Release builds may fail because it seems that qt-creator does not
#       define QTMINGW variable used to copy MinGW DLLs in release builds.
#
# Please note that this meta-project is only intended to be used by
# qt-creator users. Top level Makefile handles all dependencies itself
# and does not use ground.pro.

cache()

message("Make sure you have shadow build path set as noted in ground.pro. Build will fail otherwise")

TEMPLATE  = subdirs

SUBDIRS = \
        sub_gcs \
        sub_uavobjgenerator

# uavobjgenerator
sub_uavobjgenerator.subdir = uavobjgenerator

# GCS
sub_gcs.subdir  = gcs
sub_gcs.depends = sub_uavobjgenerator
build: Add meta-project for all software needed by GCS This meta-project allows qt-creator users to open and configure a single project and to build all required software to produce a GCS. This includes regenerating all uavobject output. NOTE: To use this meta-project, you MUST perform these steps once for each SVN checkout: - Open <top>/ground/ground.pro in qt-creator - Select the "Projects" tab - Under Build Settings/General heading, click "Show Details" - Activate "Shadow Build" - Set your Build Directory to <top>/build/ground <top> = The full path to the base of your svn tree which should contain "flight", "ground", etc. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2531 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 18:41:53 +01:00			`#`
build: get rid of build/ground subdirectory, fix qt-creator builds This changeset: - moves all ground targets one level up, under build directory. The build/ground was created as a workaround, now unnecessary; - fixes QtCreator builds, they are separated from command line builds; - moves GCS autogenerated files into openpilotgcs-synthetics directory. The resulting build subdirectory now looks like: build openpilotgcs <- Qt-Creator build directory openpilotgcs-synthetics <- version-info and opfw_resource openpilotgcs_debug openpilotgcs_release <- Makefile build directory uavobject-synthetics uavobjgenerator NOTE: you should update the shadow build path in QtCreator to build, not build/ground as before. +review OPReview 2013-03-30 16:33:38 +01:00			`# Top level Qt-Creator project file for OpenPilot GCS`
			`# Copyright (c) 2009-2013, The OpenPilot Team, http://www.openpilot.org`
build: Add meta-project for all software needed by GCS This meta-project allows qt-creator users to open and configure a single project and to build all required software to produce a GCS. This includes regenerating all uavobject output. NOTE: To use this meta-project, you MUST perform these steps once for each SVN checkout: - Open <top>/ground/ground.pro in qt-creator - Select the "Projects" tab - Under Build Settings/General heading, click "Show Details" - Activate "Shadow Build" - Set your Build Directory to <top>/build/ground <top> = The full path to the base of your svn tree which should contain "flight", "ground", etc. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2531 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 18:41:53 +01:00			`#`
Change reference to svn by git (in comments, no code change) 2011-04-24 19:23:20 +02:00			`# This meta-project allows qt-creator users to open and configure a`
build: get rid of build/ground subdirectory, fix qt-creator builds This changeset: - moves all ground targets one level up, under build directory. The build/ground was created as a workaround, now unnecessary; - fixes QtCreator builds, they are separated from command line builds; - moves GCS autogenerated files into openpilotgcs-synthetics directory. The resulting build subdirectory now looks like: build openpilotgcs <- Qt-Creator build directory openpilotgcs-synthetics <- version-info and opfw_resource openpilotgcs_debug openpilotgcs_release <- Makefile build directory uavobject-synthetics uavobjgenerator NOTE: you should update the shadow build path in QtCreator to build, not build/ground as before. +review OPReview 2013-03-30 16:33:38 +01:00			`# single project and build all required software to produce the GCS.`
			`# This includes regenerating all uavobject-synthetic files.`
Added comment for Qt-Creator users to keep all info in one place. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2537 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 23:54:48 +01:00			`#`
build: get rid of build/ground subdirectory, fix qt-creator builds This changeset: - moves all ground targets one level up, under build directory. The build/ground was created as a workaround, now unnecessary; - fixes QtCreator builds, they are separated from command line builds; - moves GCS autogenerated files into openpilotgcs-synthetics directory. The resulting build subdirectory now looks like: build openpilotgcs <- Qt-Creator build directory openpilotgcs-synthetics <- version-info and opfw_resource openpilotgcs_debug openpilotgcs_release <- Makefile build directory uavobject-synthetics uavobjgenerator NOTE: you should update the shadow build path in QtCreator to build, not build/ground as before. +review OPReview 2013-03-30 16:33:38 +01:00			`# NOTE: to use this meta-project you MUST perform these steps once`
Change reference to svn by git (in comments, no code change) 2011-04-24 19:23:20 +02:00			`# for each source tree checkout:`
Added comment for Qt-Creator users to keep all info in one place. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2537 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 23:54:48 +01:00			`# - Open <top>/ground/ground.pro in qt-creator`
			`# - Select the "Projects" tab`
build: get rid of build/ground subdirectory, fix qt-creator builds This changeset: - moves all ground targets one level up, under build directory. The build/ground was created as a workaround, now unnecessary; - fixes QtCreator builds, they are separated from command line builds; - moves GCS autogenerated files into openpilotgcs-synthetics directory. The resulting build subdirectory now looks like: build openpilotgcs <- Qt-Creator build directory openpilotgcs-synthetics <- version-info and opfw_resource openpilotgcs_debug openpilotgcs_release <- Makefile build directory uavobject-synthetics uavobjgenerator NOTE: you should update the shadow build path in QtCreator to build, not build/ground as before. +review OPReview 2013-03-30 16:33:38 +01:00			`# - Under Build Settings/General heading activate "Shadow build"`
			`# - Set "Build directory" below to <top>/build`
			`# Here <top> = the full path to the base of your git source tree which`
Change reference to svn by git (in comments, no code change) 2011-04-24 19:23:20 +02:00			`# should contain "flight", "ground", etc.`
build: get rid of build/ground subdirectory, fix qt-creator builds This changeset: - moves all ground targets one level up, under build directory. The build/ground was created as a workaround, now unnecessary; - fixes QtCreator builds, they are separated from command line builds; - moves GCS autogenerated files into openpilotgcs-synthetics directory. The resulting build subdirectory now looks like: build openpilotgcs <- Qt-Creator build directory openpilotgcs-synthetics <- version-info and opfw_resource openpilotgcs_debug openpilotgcs_release <- Makefile build directory uavobject-synthetics uavobjgenerator NOTE: you should update the shadow build path in QtCreator to build, not build/ground as before. +review OPReview 2013-03-30 16:33:38 +01:00			`#`
			`# NOTE: only debug qt-creator builds are supported on Windows.`
			`# Release builds may fail because it seems that qt-creator does not`
			`# define QTMINGW variable used to copy MinGW DLLs in release builds.`
			`#`
			`# Please note that this meta-project is only intended to be used by`
			`# qt-creator users. Top level Makefile handles all dependencies itself`
			`# and does not use ground.pro.`
Finally fixed uavobjects.pro for Windows Qt-Creator users. Please verify on Linux/Mac. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2556 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-23 22:42:01 +01:00
OP-1103 Fix for build error on OSX 10.8 after Qt5.1.1 update 2013-10-26 13:37:13 +02:00			`cache()`

build: get rid of build/ground subdirectory, fix qt-creator builds This changeset: - moves all ground targets one level up, under build directory. The build/ground was created as a workaround, now unnecessary; - fixes QtCreator builds, they are separated from command line builds; - moves GCS autogenerated files into openpilotgcs-synthetics directory. The resulting build subdirectory now looks like: build openpilotgcs <- Qt-Creator build directory openpilotgcs-synthetics <- version-info and opfw_resource openpilotgcs_debug openpilotgcs_release <- Makefile build directory uavobject-synthetics uavobjgenerator NOTE: you should update the shadow build path in QtCreator to build, not build/ground as before. +review OPReview 2013-03-30 16:33:38 +01:00			`message("Make sure you have shadow build path set as noted in ground.pro. Build will fail otherwise")`
Added comment for Qt-Creator users to keep all info in one place. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2537 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 23:54:48 +01:00
build: Add meta-project for all software needed by GCS This meta-project allows qt-creator users to open and configure a single project and to build all required software to produce a GCS. This includes regenerating all uavobject output. NOTE: To use this meta-project, you MUST perform these steps once for each SVN checkout: - Open <top>/ground/ground.pro in qt-creator - Select the "Projects" tab - Under Build Settings/General heading, click "Show Details" - Activate "Shadow Build" - Set your Build Directory to <top>/build/ground <top> = The full path to the base of your svn tree which should contain "flight", "ground", etc. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2531 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 18:41:53 +01:00			`TEMPLATE = subdirs`

			`SUBDIRS = \`
LP-1 rebranding: move ground/{openpilotgcs => gcs} and associated pro file. Change-Id: Icc200217f2db27635c7aa2e5b182f9b273925647 2015-08-02 20:20:02 +02:00			`sub_gcs \`
build: Add meta-project for all software needed by GCS This meta-project allows qt-creator users to open and configure a single project and to build all required software to produce a GCS. This includes regenerating all uavobject output. NOTE: To use this meta-project, you MUST perform these steps once for each SVN checkout: - Open <top>/ground/ground.pro in qt-creator - Select the "Projects" tab - Under Build Settings/General heading, click "Show Details" - Activate "Shadow Build" - Set your Build Directory to <top>/build/ground <top> = The full path to the base of your svn tree which should contain "flight", "ground", etc. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2531 ebee16cc-31ac-478f-84a7-5cbb03baadba 2011-01-22 18:41:53 +01:00			`sub_uavobjgenerator`

			`# uavobjgenerator`
			`sub_uavobjgenerator.subdir = uavobjgenerator`

LP-1 - Rebranding -Remove OP from GCS directory structure; additions. 2015-08-04 10:02:05 +02:00			`# GCS`
			`sub_gcs.subdir = gcs`
			`sub_gcs.depends = sub_uavobjgenerator`