1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
LibrePilot/flight/pios/inc/usb_conf.h

191 lines
7.9 KiB
C
Raw Normal View History

/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
* File Name : usb_conf.h
* Author : MCD Application Team
* Version : V3.2.1
* Date : 07/05/2010
* Description : Custom HID demo configuration file
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CONF_H
#define __USB_CONF_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#ifndef STM32F10X_CL
/*-------------------------------------------------------------*/
/* -------------- Buffer Description Table -----------------*/
/*-------------------------------------------------------------*/
/* buffer table base address */
/* buffer table base address */
#define BTABLE_ADDRESS (0x00)
/* EP0 */
/* rx/tx buffer base address */
#define ENDP0_RXADDR (0x20)
#define ENDP0_TXADDR (0x40)
/* EP1 */
/* rx/tx buffer base address */
#define ENDP1_TXADDR (0x60)
#define ENDP1_RXADDR (0x80)
/* EP2 */
/* rx/tx buffer base address */
#define ENDP2_TXADDR (0x100)
#define ENDP2_RXADDR (0x140)
/* EP3 */
/* rx/tx buffer base address */
#define ENDP3_TXADDR (0x180)
#define ENDP3_RXADDR (0x1C0)
/*-------------------------------------------------------------*/
/* ------------------- ISTR events -------------------------*/
/*-------------------------------------------------------------*/
/* IMR_MSK */
/* mask defining which events has to be handled */
/* by the device application software */
#define IMR_MSK \
(CNTR_CTRM | CNTR_WKUPM | CNTR_SUSPM | CNTR_ERRM | CNTR_SOFM \
| CNTR_ESOFM | CNTR_RESETM)
#endif /* STM32F10X_CL */
#ifdef STM32F10X_CL
/*******************************************************************************
* FIFO Size Configuration
*
* (i) Dedicated data FIFO SPRAM of 1.25 Kbytes = 1280 bytes = 320 32-bits words
* available for the endpoints IN and OUT.
* Device mode features:
* -1 bidirectional CTRL EP 0
* -3 IN EPs to support any kind of Bulk, Interrupt or Isochronous transfer
* -3 OUT EPs to support any kind of Bulk, Interrupt or Isochronous transfer
*
* ii) Receive data FIFO size = RAM for setup packets +
* OUT endpoint control information +
* data OUT packets + miscellaneous
* Space = ONE 32-bits words
* --> RAM for setup packets = 4 * n + 6 space
* (n is the nbr of CTRL EPs the device core supports)
* --> OUT EP CTRL info = 1 space
* (one space for status information written to the FIFO along with each
* received packet)
* --> data OUT packets = (Largest Packet Size / 4) + 1 spaces
* (MINIMUM to receive packets)
* --> OR data OUT packets = at least 2*(Largest Packet Size / 4) + 1 spaces
* (if high-bandwidth EP is enabled or multiple isochronous EPs)
* --> miscellaneous = 1 space per OUT EP
* (one space for transfer complete status information also pushed to the
* FIFO with each endpoint's last packet)
*
* (iii)MINIMUM RAM space required for each IN EP Tx FIFO = MAX packet size for
* that particular IN EP. More space allocated in the IN EP Tx FIFO results
* in a better performance on the USB and can hide latencies on the AHB.
*
* (iv) TXn min size = 16 words. (n : Transmit FIFO index)
* (v) When a TxFIFO is not used, the Configuration should be as follows:
* case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
* --> Txm can use the space allocated for Txn.
* case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
* --> Txn should be configured with the minimum space of 16 words
* (vi) The FIFO is used optimally when used TxFIFOs are allocated in the top
* of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
*******************************************************************************/
#define RX_FIFO_SIZE 128
#define TX0_FIFO_SIZE 64
#define TX1_FIFO_SIZE 64
#define TX2_FIFO_SIZE 16
#define TX3_FIFO_SIZE 16
/* OTGD-FS-DEVICE IP interrupts Enable definitions */
/* Uncomment the define to enable the selected interrupt */
// #define INTR_MODEMISMATCH
#define INTR_SOFINTR
#define INTR_RXSTSQLVL /* Mandatory */
// #define INTR_NPTXFEMPTY
// #define INTR_GINNAKEFF
// #define INTR_GOUTNAKEFF
// #define INTR_ERLYSUSPEND
#define INTR_USBSUSPEND /* Mandatory */
#define INTR_USBRESET /* Mandatory */
#define INTR_ENUMDONE /* Mandatory */
// #define INTR_ISOOUTDROP
// #define INTR_EOPFRAME
// #define INTR_EPMISMATCH
#define INTR_INEPINTR /* Mandatory */
#define INTR_OUTEPINTR /* Mandatory */
// #define INTR_INCOMPLISOIN
// #define INTR_INCOMPLISOOUT
#define INTR_WKUPINTR /* Mandatory */
/* OTGD-FS-DEVICE IP interrupts subroutines */
/* Comment the define to enable the selected interrupt subroutine and replace it
by user code */
#define INTR_MODEMISMATCH_Callback NOP_Process
#define INTR_SOFINTR_Callback NOP_Process
#define INTR_RXSTSQLVL_Callback NOP_Process
#define INTR_NPTXFEMPTY_Callback NOP_Process
#define INTR_NPTXFEMPTY_Callback NOP_Process
#define INTR_GINNAKEFF_Callback NOP_Process
#define INTR_GOUTNAKEFF_Callback NOP_Process
#define INTR_ERLYSUSPEND_Callback NOP_Process
#define INTR_USBSUSPEND_Callback NOP_Process
#define INTR_USBRESET_Callback NOP_Process
#define INTR_ENUMDONE_Callback NOP_Process
#define INTR_ISOOUTDROP_Callback NOP_Process
#define INTR_EOPFRAME_Callback NOP_Process
#define INTR_EPMISMATCH_Callback NOP_Process
#define INTR_INEPINTR_Callback NOP_Process
#define INTR_OUTEPINTR_Callback NOP_Process
#define INTR_INCOMPLISOIN_Callback NOP_Process
#define INTR_INCOMPLISOOUT_Callback NOP_Process
#define INTR_WKUPINTR_Callback NOP_Process
/* Isochronous data update */
#define INTR_RXSTSQLVL_ISODU_Callback NOP_Process
/* Isochronous transfer parameters */
/* Size of a single Isochronous buffer (size of a single transfer) */
#define ISOC_BUFFER_SZE 1
/* Number of sub-buffers (number of single buffers/transfers), should be even */
#define NUM_SUB_BUFFERS 2
#endif /* STM32F10X_CL */
/* CTR service routines */
/* associated to defined endpoints */
#define EP1_IN_Callback NOP_Process
#define EP2_IN_Callback NOP_Process
#define EP3_IN_Callback NOP_Process
#define EP4_IN_Callback NOP_Process
#define EP5_IN_Callback NOP_Process
#define EP6_IN_Callback NOP_Process
#define EP7_IN_Callback NOP_Process
#define EP1_OUT_Callback NOP_Process
#define EP2_OUT_Callback NOP_Process
#define EP3_OUT_Callback NOP_Process
#define EP4_OUT_Callback NOP_Process
#define EP5_OUT_Callback NOP_Process
#define EP6_OUT_Callback NOP_Process
#define EP7_OUT_Callback NOP_Process
#endif /*__USB_CONF_H*/
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/