rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
Code Issues Releases Activity
a4729ea27c
LibrePilot/shared/uavobjectdefinition/manualcontrolsettings.xml

36 lines
3.5 KiB
XML
Raw Normal View History

Change default yaw mode to rate git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3076 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:40:07 +01:00
<xml>
<object name="ManualControlSettings" singleinstance="true" settings="true">
<description>Settings to indicate how to decode receiver input by @ref ManualControlModule.</description>
rcvr: support multiple simultaneous receivers Now also supports multiple instances of the Spektrum driver. These are configured as Spektrum1 and Spektrum2.
2011-07-30 21:04:24 +02:00
<field name="ChannelGroups" units="Channel Group" type="enum"
Heli: Added an explicit collective channel. Also make the default channel number 0 since that is not invalid.
2011-09-07 06:16:34 +02:00
elementnames="Throttle,Roll,Pitch,Yaw,FlightMode,Collective,Accessory0,Accessory1,Accessory2"
spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support - both CC serial ports are now disabled by default (no telemetry); - serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options; - ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options. For DSM2 protocol there is an explicit resolution bit in the stream, so the DSM2 should be selected. For DSMX there is no such bit, and user should choose the resolution from the list configuring the spektrum port. ReceiverGroups have single DSM option which is handled by the same driver. Downside: this implementation saves received frame first, unrolls by the end of frame. This should be ok, but may be improved by unrolling channels on the fly in the rx callback. Another minor difference is that a ChannelGroup is now bound to port: DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable solution in order to not have 6 DSM options for each ChannelGroup and even more in case of new DSM protocol variations. Known problem: it is not possible to choose same protocols like DSM2/DSM2 for two ports. It can be enabled by adding an exception to common rule, though. The DSMX throttle channel misbehavior (zero value) is not treated specially yet. It should trigger the failsafe being out of bounds. More info and data dumps are required to handle this properly.
2011-10-30 18:29:03 +01:00
options="PWM,PPM,DSM (MainPort),DSM (FlexiPort),S.Bus,GCS,None" defaultvalue="None"/>
Heli: Added an explicit collective channel. Also make the default channel number 0 since that is not invalid.
2011-09-07 06:16:34 +02:00
<field name="ChannelNumber" units="channel" type="uint8" defaultvalue="0"
elementnames="Throttle,Roll,Pitch,Yaw,FlightMode,Collective,Accessory0,Accessory1,Accessory2"/>
rcvr: support multiple simultaneous receivers Now also supports multiple instances of the Spektrum driver. These are configured as Spektrum1 and Spektrum2.
2011-07-30 21:04:24 +02:00
<field name="ChannelMin" units="us" type="int16" defaultvalue="1000"
Heli: Added an explicit collective channel. Also make the default channel number 0 since that is not invalid.
2011-09-07 06:16:34 +02:00
elementnames="Throttle,Roll,Pitch,Yaw,FlightMode,Collective,Accessory0,Accessory1,Accessory2"/>
rcvr: support multiple simultaneous receivers Now also supports multiple instances of the Spektrum driver. These are configured as Spektrum1 and Spektrum2.
2011-07-30 21:04:24 +02:00
<field name="ChannelNeutral" units="us" type="int16" defaultvalue="1500"
Heli: Added an explicit collective channel. Also make the default channel number 0 since that is not invalid.
2011-09-07 06:16:34 +02:00
elementnames="Throttle,Roll,Pitch,Yaw,FlightMode,Collective,Accessory0,Accessory1,Accessory2"/>
rcvr: support multiple simultaneous receivers Now also supports multiple instances of the Spektrum driver. These are configured as Spektrum1 and Spektrum2.
2011-07-30 21:04:24 +02:00
<field name="ChannelMax" units="us" type="int16" defaultvalue="2000"
Heli: Added an explicit collective channel. Also make the default channel number 0 since that is not invalid.
2011-09-07 06:16:34 +02:00
elementnames="Throttle,Roll,Pitch,Yaw,FlightMode,Collective,Accessory0,Accessory1,Accessory2"/>
rcvr: support multiple simultaneous receivers Now also supports multiple instances of the Spektrum driver. These are configured as Spektrum1 and Spektrum2.
2011-07-30 21:04:24 +02:00
Add stick deadband option for Roll/Pitch/Yaw inputs to firmware
2012-01-14 17:18:45 +01:00
<field name="Deadband" units="%" type="float" elements="1" defaultvalue="0"/>
Change default yaw mode to rate git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3076 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:40:07 +01:00
<field name="Arming" units="" type="enum" elements="1" options="Always Disarmed,Always Armed,Roll Left,Roll Right,Pitch Forward,Pitch Aft,Yaw Left,Yaw Right" defaultvalue="Always Disarmed"/>
OP-410 OP-333: Created an Axis-lock setting for stabilization
2011-06-23 21:51:18 +02:00
Change default yaw mode to rate git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3076 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:40:07 +01:00
<!-- Note these options should be identical to those in StabilizationDesired.StabilizationMode -->
Rename VBar mode to VirtualBar
2012-05-26 17:39:35 +02:00
<field name="Stabilization1Settings" units="" type="enum" elementnames="Roll,Pitch,Yaw" options="None,Rate,Attitude,AxisLock,WeakLeveling,VirtualBar" defaultvalue="Attitude,Attitude,Rate"/>
<field name="Stabilization2Settings" units="" type="enum" elementnames="Roll,Pitch,Yaw" options="None,Rate,Attitude,AxisLock,WeakLeveling,VirtualBar" defaultvalue="Attitude,Attitude,Rate"/>
<field name="Stabilization3Settings" units="" type="enum" elementnames="Roll,Pitch,Yaw" options="None,Rate,Attitude,AxisLock,WeakLeveling,VirtualBar" defaultvalue="Attitude,Attitude,Rate"/>
OP-410 OP-333: Created an Axis-lock setting for stabilization
2011-06-23 21:51:18 +02:00
Change default yaw mode to rate git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3076 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:40:07 +01:00
<!-- Note these options values should be identical to those defined in FlightMode -->
Add support for more than 3-pos FlightMode switches It is now possible to have 1 to 6 flight mode switch positions (usefull for guidance, position hold and similar use). The input channel range is divided into N (1 to 6) zones and each zone represents a flight mode. Default is 3 zones (backward compatible), but more can be chosen. How to use: configure Tx mixers in a way they provide required number of different values for the same FlightMode channel. For instance, using Turnigy 9X radio with ER9X firmware, one can create a mixer like this: -100 MAX ID0 Manual R -50 MAX ID1 Stabilized1 (Rate) R 0 MAX ID2 Stabilized2 (Attitude) R 50 MAX RUD PositionHold R 100 MAX ELE ReturnToBase And set number of flight mode positions to 5. As a result, the 3-pos switch (ID0, ID1, ID2) will provide first three flight modes, the rudder D/R switch will override those and enable the 4th flight mode, and elevator D/R switch will have highest precedence and activate the 5th flight mode. This will change the ManualControlSettings objectID.
2012-06-23 16:14:59 +02:00
<field name="FlightModeNumber" units="" type="uint8" elements="1" defaultvalue="3"/>
GCS- Added the ability to have more than 1 ui limit per index
2012-08-03 19:57:24 +02:00
<field name="FlightModePosition" units="" type="enum" elements="6" options="Manual,Stabilized1,Stabilized2,Stabilized3,AltitudeHold,VelocityControl,PositionHold" defaultvalue="Manual,Stabilized1,Stabilized2,Stabilized3,Stabilized1,Stabilized2" limits="%0401NE:AltitudeHold:VelocityControl:PositionHold;%0402NE:AltitudeHold:VelocityControl:PositionHold,%0401NE:AltitudeHold:VelocityControl:PositionHold;%0402NE:AltitudeHold:VelocityControl:PositionHold,%0401NE:AltitudeHold:VelocityControl:PositionHold;%0402NE:AltitudeHold:VelocityControl:PositionHold,%0401NE:AltitudeHold:VelocityControl:PositionHold;%0402NE:AltitudeHold:VelocityControl:PositionHold,%0401NE:AltitudeHold:VelocityControl:PositionHold;%0402NE:AltitudeHold:VelocityControl:PositionHold,%0401NE:AltitudeHold:VelocityControl:PositionHold;%0402NE:AltitudeHold:VelocityControl:PositionHold"/>
OP-410 OP-333: Created an Axis-lock setting for stabilization
2011-06-23 21:51:18 +02:00
Change default yaw mode to rate git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3076 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:40:07 +01:00
<field name="ArmedTimeout" units="ms" type="uint16" elements="1" defaultvalue="30000"/>
<access gcs="readwrite" flight="readwrite"/>
<telemetrygcs acked="true" updatemode="onchange" period="0"/>
<telemetryflight acked="true" updatemode="onchange" period="0"/>
Fixed metadata settings in object browswer, and removed update mode never from all uavobjects that used it (changed to manual).
2012-04-21 20:59:14 +02:00
<logging updatemode="manual" period="0"/>
Change default yaw mode to rate git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3076 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 12:40:07 +01:00
</object>
</xml>
Reference in New Issue Copy Permalink