2010-09-16 21:19:38 +02:00
|
|
|
/**
|
|
|
|
|
******************************************************************************
|
|
|
|
|
* @addtogroup OpenPilotSystem OpenPilot System
|
|
|
|
|
* @{
|
|
|
|
|
* @addtogroup OpenPilotCore OpenPilot Core
|
|
|
|
|
* @{
|
|
|
|
|
* @file pios_board.h
|
|
|
|
|
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
|
|
|
|
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
|
|
|
|
|
* @see The GNU Public License (GPL) Version 3
|
|
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
/*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful, but
|
|
|
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
|
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
|
|
|
* for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
|
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef STM3210E_OP_H_
|
|
|
|
|
#define STM3210E_OP_H_
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
//------------------------
|
|
|
|
|
// Timers and Channels Used
|
|
|
|
|
//------------------------
|
|
|
|
|
/*
|
|
|
|
|
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
|
|
|
|
|
------+-----------+-----------+-----------+----------
|
|
|
|
|
TIM1 | RC In 3 | RC In 6 | RC In 5 |
|
|
|
|
|
TIM2 | --------------- PIOS_DELAY -----------------
|
|
|
|
|
TIM3 | RC In 7 | RC In 8 | RC In 1 | RC In 2
|
|
|
|
|
TIM4 | Servo 1 | Servo 2 | Servo 3 | Servo 4
|
|
|
|
|
TIM5 | RC In 4 | | |
|
|
|
|
|
TIM6 | ----------- PIOS_PWM (Supervisor) ----------
|
|
|
|
|
TIM7 | | | |
|
|
|
|
|
TIM8 | Servo 5 | Servo 6 | Servo 7 | Servo 8
|
|
|
|
|
------+-----------+-----------+-----------+----------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
//------------------------
|
|
|
|
|
// DMA Channels Used
|
|
|
|
|
//------------------------
|
|
|
|
|
/* Channel 1 - ADC */
|
|
|
|
|
/* Channel 2 - SPI1 RX */
|
|
|
|
|
/* Channel 3 - SPI1 TX */
|
|
|
|
|
/* Channel 4 - SPI2 RX */
|
|
|
|
|
/* Channel 5 - SPI2 TX */
|
|
|
|
|
/* Channel 6 - */
|
|
|
|
|
/* Channel 7 - */
|
|
|
|
|
/* Channel 8 - */
|
|
|
|
|
/* Channel 9 - */
|
|
|
|
|
/* Channel 10 - */
|
|
|
|
|
/* Channel 11 - */
|
|
|
|
|
/* Channel 12 - */
|
|
|
|
|
|
|
|
|
|
//------------------------
|
|
|
|
|
// BOOTLOADER_SETTINGS
|
|
|
|
|
//------------------------
|
|
|
|
|
|
2011-01-16 21:41:55 +01:00
|
|
|
//#define FUNC_ID 1
|
|
|
|
|
//#define HW_VERSION 01
|
|
|
|
|
|
2010-09-16 21:19:38 +02:00
|
|
|
#define BOOTLOADER_VERSION 0
|
2011-01-16 21:41:55 +01:00
|
|
|
#define BOARD_TYPE 0x01 // OpenPilot board
|
|
|
|
|
#define BOARD_REVISION 0x01 // Beta version
|
|
|
|
|
//#define HW_VERSION (BOARD_TYPE << 8) | BOARD_REVISION
|
|
|
|
|
|
2010-09-16 21:19:38 +02:00
|
|
|
#define MEM_SIZE 524288 //512K
|
|
|
|
|
#define SIZE_OF_DESCRIPTION (uint8_t) 100
|
2010-12-21 18:25:24 +01:00
|
|
|
#define START_OF_USER_CODE (uint32_t)0x08005000//REMEMBER SET ALSO IN link_stm32f10x_HD_BL.ld
|
2010-09-16 21:19:38 +02:00
|
|
|
#define SIZE_OF_CODE (uint32_t) (MEM_SIZE-(START_OF_USER_CODE-0x08000000)-SIZE_OF_DESCRIPTION)
|
2010-12-21 18:25:24 +01:00
|
|
|
|
2010-09-16 21:19:38 +02:00
|
|
|
#ifdef STM32F10X_HD
|
|
|
|
|
#define HW_TYPE 0 //0=high_density 1=medium_density;
|
|
|
|
|
#elif STM32F10X_MD
|
|
|
|
|
#define HW_TYPE 1 //0=high_density 1=medium_density;
|
|
|
|
|
#endif
|
|
|
|
|
#define BOARD_READABLE TRUE
|
|
|
|
|
#define BOARD_WRITABLA TRUE
|
|
|
|
|
#define MAX_DEL_RETRYS 3
|
|
|
|
|
|
2011-01-10 01:16:30 +01:00
|
|
|
//------------------------
|
|
|
|
|
// WATCHDOG_SETTINGS
|
|
|
|
|
//------------------------
|
|
|
|
|
#define PIOS_WATCHDOG_TIMEOUT 250
|
|
|
|
|
#define PIOS_WDG_REGISTER BKP_DR4
|
|
|
|
|
#define PIOS_WDG_ACTUATOR 0x0001
|
|
|
|
|
#define PIOS_WDG_STABILIZATION 0x0002
|
|
|
|
|
#define PIOS_WDG_AHRS 0x0004
|
|
|
|
|
#define PIOS_WDG_MANUAL 0x0008
|
|
|
|
|
|
2011-02-01 03:17:59 +01:00
|
|
|
//------------------------
|
|
|
|
|
// TELEMETRY
|
|
|
|
|
//------------------------
|
|
|
|
|
#define TELEM_QUEUE_SIZE 20
|
|
|
|
|
#define TELEM_STACK_SIZE 624
|
|
|
|
|
|
2010-09-16 21:19:38 +02:00
|
|
|
//------------------------
|
|
|
|
|
// PIOS_LED
|
|
|
|
|
//------------------------
|
|
|
|
|
#define PIOS_LED_LED1_GPIO_PORT GPIOC
|
|
|
|
|
#define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_12
|
|
|
|
|
#define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
|
#define PIOS_LED_LED2_GPIO_PORT GPIOC
|
|
|
|
|
#define PIOS_LED_LED2_GPIO_PIN GPIO_Pin_13
|
|
|
|
|
#define PIOS_LED_LED2_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
|
#define PIOS_LED_NUM 2
|
|
|
|
|
#define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT, PIOS_LED_LED2_GPIO_PORT }
|
|
|
|
|
#define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN, PIOS_LED_LED2_GPIO_PIN }
|
|
|
|
|
#define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK, PIOS_LED_LED2_GPIO_CLK }
|
|
|
|
|
|
|
|
|
|
//------------------------
|
|
|
|
|
// PIOS_I2C
|
|
|
|
|
// See also pios_board.c
|
|
|
|
|
//------------------------
|
|
|
|
|
#define PIOS_I2C_MAIN_ADAPTER 0
|
|
|
|
|
|
|
|
|
|
//------------------------
|
|
|
|
|
// PIOS_BMP085
|
|
|
|
|
//------------------------
|
|
|
|
|
#define PIOS_BMP085_EOC_GPIO_PORT GPIOC
|
|
|
|
|
#define PIOS_BMP085_EOC_GPIO_PIN GPIO_Pin_15
|
|
|
|
|
#define PIOS_BMP085_EOC_PORT_SOURCE GPIO_PortSourceGPIOC
|
|
|
|
|
#define PIOS_BMP085_EOC_PIN_SOURCE GPIO_PinSource15
|
|
|
|
|
#define PIOS_BMP085_EOC_CLK RCC_APB2Periph_GPIOC
|
|
|
|
|
#define PIOS_BMP085_EOC_EXTI_LINE EXTI_Line15
|
|
|
|
|
#define PIOS_BMP085_EOC_IRQn EXTI15_10_IRQn
|
2011-01-09 21:49:26 +01:00
|
|
|
#define PIOS_BMP085_EOC_PRIO PIOS_IRQ_PRIO_LOW
|
2011-01-05 12:26:47 +01:00
|
|
|
//#define PIOS_BMP085_OVERSAMPLING 2
|
|
|
|
|
#define PIOS_BMP085_OVERSAMPLING 3
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// USART
|
|
|
|
|
//
|
|
|
|
|
// See also pios_board.c
|
|
|
|
|
//-------------------------
|
2011-01-14 02:38:37 +01:00
|
|
|
#define PIOS_USART_RX_BUFFER_SIZE 512
|
|
|
|
|
#define PIOS_USART_TX_BUFFER_SIZE 512
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
#define PIOS_COM_TELEM_BAUDRATE 57600
|
|
|
|
|
#define PIOS_COM_GPS_BAUDRATE 57600
|
|
|
|
|
|
2010-11-21 20:37:40 +01:00
|
|
|
#ifdef PIOS_NO_GPS
|
|
|
|
|
#define PIOS_COM_TELEM_RF 0
|
|
|
|
|
#define PIOS_COM_TELEM_USB 1
|
|
|
|
|
#else
|
|
|
|
|
#define PIOS_COM_TELEM_RF 0
|
|
|
|
|
#define PIOS_COM_GPS 1
|
|
|
|
|
#define PIOS_COM_TELEM_USB 2
|
|
|
|
|
#endif
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
#ifdef PIOS_ENABLE_AUX_UART
|
|
|
|
|
#define PIOS_COM_AUX_BAUDRATE 57600
|
2010-11-21 20:37:40 +01:00
|
|
|
#define PIOS_COM_AUX 3
|
|
|
|
|
#define PIOS_COM_DEBUG PIOS_COM_AUX
|
2010-09-16 21:19:38 +02:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef PIOS_INCLUDE_SPEKTRUM
|
|
|
|
|
#define PIOS_COM_SPEKTRUM_BAUDRATE 115200
|
|
|
|
|
#define PIOS_COM_SPEKTRUM 3
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// SPI
|
|
|
|
|
//
|
|
|
|
|
// See also pios_board.c
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_SDCARD_SPI 0
|
|
|
|
|
#define PIOS_OPAHRS_SPI 1
|
|
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// Delay Timer
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_DELAY_TIMER TIM2
|
|
|
|
|
#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE)
|
|
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// System Settings
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_MASTER_CLOCK 72000000
|
|
|
|
|
#define PIOS_PERIPHERAL_CLOCK (PIOS_MASTER_CLOCK / 2)
|
|
|
|
|
#if defined(USE_BOOTLOADER)
|
|
|
|
|
#define PIOS_NVIC_VECTTAB_FLASH (START_OF_USER_CODE)
|
|
|
|
|
#else
|
|
|
|
|
#define PIOS_NVIC_VECTTAB_FLASH ((uint32_t)0x08000000)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// Interrupt Priorities
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
|
|
|
|
|
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
|
|
|
|
|
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
|
|
|
|
|
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
|
|
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// Receiver PWM inputs
|
|
|
|
|
//-------------------------
|
2011-01-24 08:51:45 +01:00
|
|
|
/*#define PIOS_PWM_SUPV_ENABLED 1
|
2010-09-16 21:19:38 +02:00
|
|
|
#define PIOS_PWM_SUPV_TIMER TIM6
|
|
|
|
|
#define PIOS_PWM_SUPV_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE)
|
|
|
|
|
#define PIOS_PWM_SUPV_HZ 25
|
|
|
|
|
#define PIOS_PWM_SUPV_IRQ_CHANNEL TIM6_IRQn
|
2011-01-24 08:51:45 +01:00
|
|
|
#define PIOS_PWM_SUPV_IRQ_FUNC void TIM6_IRQHandler(void)*/
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// Receiver PPM input
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_PPM_GPIO_PORT PIOS_PWM_CH1_GPIO_PORT
|
|
|
|
|
#define PIOS_PPM_GPIO_PIN PIOS_PWM_CH1_PIN
|
|
|
|
|
#define PIOS_PPM_TIM_PORT PIOS_PWM_CH1_TIM_PORT
|
|
|
|
|
#define PIOS_PPM_TIM_CHANNEL PIOS_PWM_CH1_CH
|
|
|
|
|
#define PIOS_PPM_TIM_CCR PIOS_PWM_CH1_CCR
|
|
|
|
|
#define PIOS_PPM_TIM TIM1
|
|
|
|
|
#define PIOS_PPM_TIM_IRQ TIM1_CC_IRQn
|
|
|
|
|
#define PIOS_PPM_NUM_INPUTS 8 //Could be more if needed
|
|
|
|
|
#define PIOS_PPM_SUPV_ENABLED 1
|
|
|
|
|
#define PIOS_PPM_SUPV_TIMER TIM6
|
|
|
|
|
#define PIOS_PPM_SUPV_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE)
|
|
|
|
|
#define PIOS_PPM_SUPV_HZ 25
|
|
|
|
|
#define PIOS_PPM_SUPV_IRQ_CHANNEL TIM6_IRQn
|
|
|
|
|
#define PIOS_PPM_SUPV_IRQ_FUNC void TIM6_IRQHandler(void)
|
|
|
|
|
|
2010-09-20 20:00:31 +02:00
|
|
|
//-------------------------
|
|
|
|
|
// SPEKTRUM input
|
|
|
|
|
//-------------------------
|
2011-01-28 10:25:30 +01:00
|
|
|
//#define PIOS_SPEKTRUM_SUPV_ENABLED 1
|
|
|
|
|
//#define PIOS_SPEKTRUM_SUPV_TIMER TIM6
|
|
|
|
|
//#define PIOS_SPEKTRUM_SUPV_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE)
|
|
|
|
|
//#define PIOS_SPEKTRUM_SUPV_HZ 60 // 1/22ms
|
|
|
|
|
//#define PIOS_SPEKTRUM_SUPV_IRQ_CHANNEL TIM6_IRQn
|
|
|
|
|
//#define PIOS_SPEKTRUM_SUPV_IRQ_FUNC void TIM6_IRQHandler(void)
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// Servo outputs
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_SERVO_UPDATE_HZ 50
|
2011-01-09 21:49:35 +01:00
|
|
|
#define PIOS_SERVOS_INITIAL_POSITION 0 /* dont want to start motors, have no pulse till settings loaded */
|
2011-01-24 08:51:45 +01:00
|
|
|
#define PIOS_PWM_MAX_INPUTS 8
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// ADC
|
|
|
|
|
// PIOS_ADC_PinGet(0) = Temperature Sensor (On-board)
|
|
|
|
|
// PIOS_ADC_PinGet(1) = Power Sensor (Current)
|
|
|
|
|
// PIOS_ADC_PinGet(2) = Power Sensor (Voltage)
|
|
|
|
|
// PIOS_ADC_PinGet(3) = On-board 5v Rail Sensor
|
|
|
|
|
// PIOS_ADC_PinGet(4) = Auxiliary Input 1
|
|
|
|
|
// PIOS_ADC_PinGet(5) = Auxiliary Input 2
|
|
|
|
|
// PIOS_ADC_PinGet(6) = Auxiliary Input 3
|
|
|
|
|
//-------------------------
|
|
|
|
|
//#define PIOS_ADC_OVERSAMPLING_RATE 1
|
|
|
|
|
#define PIOS_ADC_USE_TEMP_SENSOR 1
|
|
|
|
|
#define PIOS_ADC_TEMP_SENSOR_ADC ADC1
|
|
|
|
|
#define PIOS_ADC_TEMP_SENSOR_ADC_CHANNEL 1
|
|
|
|
|
#define PIOS_ADC_PIN1_GPIO_PORT GPIOA // PA1 (Power Sense - Voltage)
|
|
|
|
|
#define PIOS_ADC_PIN1_GPIO_PIN GPIO_Pin_1 // ADC123_IN1
|
|
|
|
|
#define PIOS_ADC_PIN1_GPIO_CHANNEL ADC_Channel_1
|
|
|
|
|
#define PIOS_ADC_PIN1_ADC ADC1
|
|
|
|
|
#define PIOS_ADC_PIN1_ADC_NUMBER 2
|
|
|
|
|
#define PIOS_ADC_PIN2_GPIO_PORT GPIOC // PC3 (Power Sense - Current)
|
|
|
|
|
#define PIOS_ADC_PIN2_GPIO_PIN GPIO_Pin_3 // ADC123_IN13
|
|
|
|
|
#define PIOS_ADC_PIN2_GPIO_CHANNEL ADC_Channel_13
|
|
|
|
|
#define PIOS_ADC_PIN2_ADC ADC2
|
|
|
|
|
#define PIOS_ADC_PIN2_ADC_NUMBER 1
|
|
|
|
|
#define PIOS_ADC_PIN3_GPIO_PORT GPIOC // PC5 (Onboard 5v Sensor) PC5
|
|
|
|
|
#define PIOS_ADC_PIN3_GPIO_PIN GPIO_Pin_5 // ADC12_IN15
|
|
|
|
|
#define PIOS_ADC_PIN3_GPIO_CHANNEL ADC_Channel_15
|
|
|
|
|
#define PIOS_ADC_PIN3_ADC ADC2
|
|
|
|
|
#define PIOS_ADC_PIN3_ADC_NUMBER 2
|
|
|
|
|
#define PIOS_ADC_PIN4_GPIO_PORT GPIOC // PC0 (AUX 1)
|
|
|
|
|
#define PIOS_ADC_PIN4_GPIO_PIN GPIO_Pin_0 // ADC123_IN10
|
|
|
|
|
#define PIOS_ADC_PIN4_GPIO_CHANNEL ADC_Channel_10
|
|
|
|
|
#define PIOS_ADC_PIN4_ADC ADC1
|
|
|
|
|
#define PIOS_ADC_PIN4_ADC_NUMBER 3
|
|
|
|
|
#define PIOS_ADC_PIN5_GPIO_PORT GPIOC // PC1 (AUX 2)
|
|
|
|
|
#define PIOS_ADC_PIN5_GPIO_PIN GPIO_Pin_1 // ADC123_IN11
|
|
|
|
|
#define PIOS_ADC_PIN5_GPIO_CHANNEL ADC_Channel_11
|
|
|
|
|
#define PIOS_ADC_PIN5_ADC ADC2
|
|
|
|
|
#define PIOS_ADC_PIN5_ADC_NUMBER 3
|
|
|
|
|
#define PIOS_ADC_PIN6_GPIO_PORT GPIOC // PC2 (AUX 3)
|
|
|
|
|
#define PIOS_ADC_PIN6_GPIO_PIN GPIO_Pin_2 // ADC123_IN12
|
|
|
|
|
#define PIOS_ADC_PIN6_GPIO_CHANNEL ADC_Channel_12
|
|
|
|
|
#define PIOS_ADC_PIN6_ADC ADC1
|
|
|
|
|
#define PIOS_ADC_PIN6_ADC_NUMBER 4
|
|
|
|
|
#define PIOS_ADC_NUM_PINS 6
|
|
|
|
|
#define PIOS_ADC_PORTS { PIOS_ADC_PIN1_GPIO_PORT, PIOS_ADC_PIN2_GPIO_PORT, PIOS_ADC_PIN3_GPIO_PORT, PIOS_ADC_PIN4_GPIO_PORT, PIOS_ADC_PIN5_GPIO_PORT, PIOS_ADC_PIN6_GPIO_PORT }
|
|
|
|
|
#define PIOS_ADC_PINS { PIOS_ADC_PIN1_GPIO_PIN, PIOS_ADC_PIN2_GPIO_PIN, PIOS_ADC_PIN3_GPIO_PIN, PIOS_ADC_PIN4_GPIO_PIN, PIOS_ADC_PIN5_GPIO_PIN, PIOS_ADC_PIN6_GPIO_PIN }
|
|
|
|
|
#define PIOS_ADC_CHANNELS { PIOS_ADC_PIN1_GPIO_CHANNEL, PIOS_ADC_PIN2_GPIO_CHANNEL, PIOS_ADC_PIN3_GPIO_CHANNEL, PIOS_ADC_PIN4_GPIO_CHANNEL, PIOS_ADC_PIN5_GPIO_CHANNEL, PIOS_ADC_PIN6_GPIO_CHANNEL }
|
|
|
|
|
#define PIOS_ADC_MAPPING { PIOS_ADC_PIN1_ADC, PIOS_ADC_PIN2_ADC, PIOS_ADC_PIN3_ADC, PIOS_ADC_PIN4_ADC, PIOS_ADC_PIN5_ADC, PIOS_ADC_PIN6_ADC }
|
|
|
|
|
#define PIOS_ADC_CHANNEL_MAPPING { PIOS_ADC_PIN1_ADC_NUMBER, PIOS_ADC_PIN2_ADC_NUMBER, PIOS_ADC_PIN3_ADC_NUMBER, PIOS_ADC_PIN4_ADC_NUMBER, PIOS_ADC_PIN5_ADC_NUMBER, PIOS_ADC_PIN6_ADC_NUMBER }
|
|
|
|
|
#define PIOS_ADC_NUM_CHANNELS (PIOS_ADC_NUM_PINS + PIOS_ADC_USE_TEMP_SENSOR)
|
|
|
|
|
#define PIOS_ADC_NUM_ADC_CHANNELS 2
|
|
|
|
|
#define PIOS_ADC_USE_ADC2 1
|
|
|
|
|
#define PIOS_ADC_CLOCK_FUNCTION RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE)
|
|
|
|
|
#define PIOS_ADC_ADCCLK RCC_PCLK2_Div8
|
|
|
|
|
/* RCC_PCLK2_Div2: ADC clock = PCLK2/2 */
|
|
|
|
|
/* RCC_PCLK2_Div4: ADC clock = PCLK2/4 */
|
|
|
|
|
/* RCC_PCLK2_Div6: ADC clock = PCLK2/6 */
|
|
|
|
|
/* RCC_PCLK2_Div8: ADC clock = PCLK2/8 */
|
|
|
|
|
#define PIOS_ADC_SAMPLE_TIME ADC_SampleTime_239Cycles5
|
|
|
|
|
/* Sample time: */
|
|
|
|
|
/* With an ADCCLK = 14 MHz and a sampling time of 293.5 cycles: */
|
|
|
|
|
/* Tconv = 239.5 + 12.5 = 252 cycles = 18?s */
|
|
|
|
|
/* (1 / (ADCCLK / CYCLES)) = Sample Time (?S) */
|
2011-01-09 21:49:43 +01:00
|
|
|
#define PIOS_ADC_IRQ_PRIO PIOS_IRQ_PRIO_LOW
|
2011-01-17 00:00:48 +01:00
|
|
|
#define PIOS_ADC_MAX_OVERSAMPLING 10
|
|
|
|
|
#define PIOS_ADC_RATE (72.0e6 / 1 / 8 / 252 / (PIOS_ADC_NUM_ADC_CHANNELS >> PIOS_ADC_USE_ADC2))
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// GPIO
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_GPIO_1_PORT GPIOC
|
|
|
|
|
#define PIOS_GPIO_1_PIN GPIO_Pin_0
|
|
|
|
|
#define PIOS_GPIO_1_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
|
#define PIOS_GPIO_2_PORT GPIOC
|
|
|
|
|
#define PIOS_GPIO_2_PIN GPIO_Pin_1
|
|
|
|
|
#define PIOS_GPIO_2_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
|
#define PIOS_GPIO_3_PORT GPIOC
|
|
|
|
|
#define PIOS_GPIO_3_PIN GPIO_Pin_2
|
|
|
|
|
#define PIOS_GPIO_3_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
|
#define PIOS_GPIO_4_PORT GPIOD
|
|
|
|
|
#define PIOS_GPIO_4_PIN GPIO_Pin_2
|
|
|
|
|
#define PIOS_GPIO_4_GPIO_CLK RCC_APB2Periph_GPIOD
|
|
|
|
|
#define PIOS_GPIO_PORTS { PIOS_GPIO_1_PORT, PIOS_GPIO_2_PORT, PIOS_GPIO_3_PORT, PIOS_GPIO_4_PORT }
|
|
|
|
|
#define PIOS_GPIO_PINS { PIOS_GPIO_1_PIN, PIOS_GPIO_2_PIN, PIOS_GPIO_3_PIN, PIOS_GPIO_4_PIN }
|
|
|
|
|
#define PIOS_GPIO_CLKS { PIOS_GPIO_1_GPIO_CLK, PIOS_GPIO_2_GPIO_CLK, PIOS_GPIO_3_GPIO_CLK, PIOS_GPIO_4_GPIO_CLK }
|
|
|
|
|
#define PIOS_GPIO_NUM 4
|
|
|
|
|
|
|
|
|
|
//-------------------------
|
|
|
|
|
// USB
|
|
|
|
|
//-------------------------
|
|
|
|
|
#define PIOS_USB_ENABLED 1
|
|
|
|
|
#define PIOS_USB_DETECT_GPIO_PORT GPIOC
|
|
|
|
|
#define PIOS_USB_DETECT_GPIO_PIN GPIO_Pin_4
|
|
|
|
|
#define PIOS_USB_DETECT_EXTI_LINE EXTI_Line4
|
|
|
|
|
#define PIOS_IRQ_USB_PRIORITY PIOS_IRQ_PRIO_MID
|
2011-01-14 03:15:19 +01:00
|
|
|
#define PIOS_USB_RX_BUFFER_SIZE 512
|
|
|
|
|
#define PIOS_USB_TX_BUFFER_SIZE 512
|
2010-09-16 21:19:38 +02:00
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* glue macros for file IO
|
|
|
|
|
* STM32 uses DOSFS for file IO
|
|
|
|
|
*/
|
|
|
|
|
#define PIOS_FOPEN_READ(filename,file) DFS_OpenFile(&PIOS_SDCARD_VolInfo, (uint8_t *)filename, DFS_READ, PIOS_SDCARD_Sector, &file) != DFS_OK
|
|
|
|
|
|
|
|
|
|
#define PIOS_FOPEN_WRITE(filename,file) DFS_OpenFile(&PIOS_SDCARD_VolInfo, (uint8_t *)filename, DFS_WRITE, PIOS_SDCARD_Sector, &file) != DFS_OK
|
|
|
|
|
|
|
|
|
|
#define PIOS_FREAD(file,bufferadr,length,resultadr) DFS_ReadFile(file, PIOS_SDCARD_Sector, (uint8_t*)bufferadr, resultadr, length) != DFS_OK
|
|
|
|
|
|
|
|
|
|
#define PIOS_FWRITE(file,bufferadr,length,resultadr) DFS_WriteFile(file, PIOS_SDCARD_Sector, (uint8_t*)bufferadr, resultadr, length)
|
|
|
|
|
|
|
|
|
|
#define PIOS_FCLOSE(file) DFS_Close(&file)
|
|
|
|
|
|
|
|
|
|
#define PIOS_FUNLINK(filename) DFS_UnlinkFile(&PIOS_SDCARD_VolInfo, (uint8_t *)filename, PIOS_SDCARD_Sector)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#endif /* STM3210E_OP_H_ */
|
|
|
|
|
/**
|
|
|
|
|
* @}
|
|
|
|
|
* @}
|
|
|
|
|
*/
|
