LibrePilot/flight/Modules/TxPID/txpid.c

/**
 ******************************************************************************
 * @addtogroup OpenPilotModules OpenPilot Modules
 * @{
 * @addtogroup TxPIDModule TxPID Module
 * @brief      Optional module to tune PID settings using R/C transmitter.
 * Updates PID settings in RAM in real-time using configured Accessory channels as controllers.
 * @{
 *
 * @file       txpid.c
 * @author     The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011.
 * @brief      Optional module to tune PID settings using R/C transmitter.
 *
 * @see        The GNU Public License (GPL) Version 3
 *
 *****************************************************************************/
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

/**
 * Output object: StabilizationSettings
 *
 * This module will periodically update values of stabilization PID settings
 * depending on configured input control channels. New values of stabilization
 * settings are not saved to flash, but updated in RAM. It is expected that the
 * module will be enabled only for tuning. When desired values are found, they
 * can be read via GCS and saved permanently. Then this module should be
 * disabled again.
 *
 * UAVObjects are automatically generated by the UAVObjectGenerator from
 * the object definition XML file.
 *
 * Modules have no API, all communication to other modules is done through UAVObjects.
 * However modules may use the API exposed by shared libraries.
 * See the OpenPilot wiki for more details.
 * http://wiki.openpilot.org/display/Doc/OpenPilot+Architecture
 *
 */

#include "openpilot.h"

#include "txpidsettings.h"
#include "accessorydesired.h"
#include "manualcontrolcommand.h"
#include "stabilizationsettings.h"
#include "flightstatus.h"
#include "hwsettings.h"

//
// Configuration
//
#define SAMPLE_PERIOD_MS		200
#define TELEMETRY_UPDATE_PERIOD_MS	0	// 0 = update on change (default)

// Sanity checks
#if (TXPIDSETTINGS_PIDS_NUMELEM != TXPIDSETTINGS_INPUTS_NUMELEM) || \
    (TXPIDSETTINGS_PIDS_NUMELEM != TXPIDSETTINGS_MINPID_NUMELEM) || \
    (TXPIDSETTINGS_PIDS_NUMELEM != TXPIDSETTINGS_MAXPID_NUMELEM)
#error Invalid TxPID UAVObject definition (inconsistent number of field elements)
#endif

// Private types

// Private variables

// Private functions
static void updatePIDs(UAVObjEvent* ev);
static uint8_t update(float *var, float val);
static float scale(float val, float inMin, float inMax, float outMin, float outMax);

/**
 * Initialise the module, called on startup
 * \returns 0 on success or -1 if initialisation failed
 */
int32_t TxPIDInitialize(void)
{
	bool txPIDEnabled;
	uint8_t optionalModules[HWSETTINGS_OPTIONALMODULES_NUMELEM];

	HwSettingsInitialize();
	HwSettingsOptionalModulesGet(optionalModules);

	if (optionalModules[HWSETTINGS_OPTIONALMODULES_TXPID] == HWSETTINGS_OPTIONALMODULES_ENABLED)
		txPIDEnabled = true;
	else
		txPIDEnabled = false;

	if (txPIDEnabled) {

		TxPIDSettingsInitialize();
		AccessoryDesiredInitialize();

		UAVObjEvent ev = {
			.obj = AccessoryDesiredHandle(),
			.instId = 0,
			.event = 0,
		};
		EventPeriodicCallbackCreate(&ev, updatePIDs, SAMPLE_PERIOD_MS / portTICK_RATE_MS);

#if (TELEMETRY_UPDATE_PERIOD_MS != 0)
		// Change StabilizationSettings update rate from OnChange to periodic
		// to prevent telemetry link flooding with frequent updates in case of
		// control channel jitter.
		// Warning: saving to flash with this code active will change the
		// StabilizationSettings update rate permanently. Use Metadata via
		// browser to reset to defaults (telemetryAcked=true, OnChange).
		UAVObjMetadata metadata;
		StabilizationSettingsInitialize();
		StabilizationSettingsGetMetadata(&metadata);
		metadata.telemetryAcked = 0;
		metadata.telemetryUpdateMode = UPDATEMODE_PERIODIC;
		metadata.telemetryUpdatePeriod = TELEMETRY_UPDATE_PERIOD_MS;
		StabilizationSettingsSetMetadata(&metadata);
#endif

		return 0;
	}

	return -1;
}

/* stub: module has no module thread */
int32_t TxPIDStart(void)
{
	return 0;
}

MODULE_INITCALL(TxPIDInitialize, TxPIDStart)

/**
 * Update PIDs callback function
 */
static void updatePIDs(UAVObjEvent* ev)
{
	if (ev->obj != AccessoryDesiredHandle())
		return;

	TxPIDSettingsData inst;
	TxPIDSettingsGet(&inst);

	if (inst.UpdateMode == TXPIDSETTINGS_UPDATEMODE_NEVER)
		return;

	uint8_t armed;
	FlightStatusArmedGet(&armed);
	if ((inst.UpdateMode == TXPIDSETTINGS_UPDATEMODE_WHENARMED) &&
			(armed == FLIGHTSTATUS_ARMED_DISARMED))
		return;

	StabilizationSettingsData stab;
	StabilizationSettingsGet(&stab);
	AccessoryDesiredData accessory;

	uint8_t needsUpdate = 0;

	// Loop through every enabled instance
	for (uint8_t i = 0; i < TXPIDSETTINGS_PIDS_NUMELEM; i++) {
		if (inst.PIDs[i] != TXPIDSETTINGS_PIDS_DISABLED) {

			float value;
			if (inst.Inputs[i] == TXPIDSETTINGS_INPUTS_THROTTLE) {
				ManualControlCommandThrottleGet(&value);
				value = scale(value,
						inst.ThrottleRange[TXPIDSETTINGS_THROTTLERANGE_MIN],
						inst.ThrottleRange[TXPIDSETTINGS_THROTTLERANGE_MAX],
						inst.MinPID[i], inst.MaxPID[i]);
			} else if (AccessoryDesiredInstGet(inst.Inputs[i] - TXPIDSETTINGS_INPUTS_ACCESSORY0, &accessory) == 0) {
				value = scale(accessory.AccessoryVal, -1.0, 1.0, inst.MinPID[i], inst.MaxPID[i]);
			} else {
				continue;
			}

			switch (inst.PIDs[i]) {
			case TXPIDSETTINGS_PIDS_ROLLRATEKP:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLRATEKI:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLRATEKD:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_KD], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLRATEILIMIT:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLATTITUDEKP:
				needsUpdate |= update(&stab.RollPI[STABILIZATIONSETTINGS_ROLLPI_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLATTITUDEKI:
				needsUpdate |= update(&stab.RollPI[STABILIZATIONSETTINGS_ROLLPI_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLATTITUDEILIMIT:
				needsUpdate |= update(&stab.RollPI[STABILIZATIONSETTINGS_ROLLPI_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHRATEKP:
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHRATEKI:
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHRATEKD:
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KD], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHRATEILIMIT:
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHATTITUDEKP:
				needsUpdate |= update(&stab.PitchPI[STABILIZATIONSETTINGS_PITCHPI_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHATTITUDEKI:
				needsUpdate |= update(&stab.PitchPI[STABILIZATIONSETTINGS_PITCHPI_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_PITCHATTITUDEILIMIT:
				needsUpdate |= update(&stab.PitchPI[STABILIZATIONSETTINGS_PITCHPI_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHRATEKP:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_KP], value);
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHRATEKI:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_KI], value);
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHRATEKD:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_KD], value);
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_KD], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHRATEILIMIT:
				needsUpdate |= update(&stab.RollRatePID[STABILIZATIONSETTINGS_ROLLRATEPID_ILIMIT], value);
				needsUpdate |= update(&stab.PitchRatePID[STABILIZATIONSETTINGS_PITCHRATEPID_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHATTITUDEKP:
				needsUpdate |= update(&stab.RollPI[STABILIZATIONSETTINGS_ROLLPI_KP], value);
				needsUpdate |= update(&stab.PitchPI[STABILIZATIONSETTINGS_PITCHPI_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHATTITUDEKI:
				needsUpdate |= update(&stab.RollPI[STABILIZATIONSETTINGS_ROLLPI_KI], value);
				needsUpdate |= update(&stab.PitchPI[STABILIZATIONSETTINGS_PITCHPI_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_ROLLPITCHATTITUDEILIMIT:
				needsUpdate |= update(&stab.RollPI[STABILIZATIONSETTINGS_ROLLPI_ILIMIT], value);
				needsUpdate |= update(&stab.PitchPI[STABILIZATIONSETTINGS_PITCHPI_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWRATEKP:
				needsUpdate |= update(&stab.YawRatePID[STABILIZATIONSETTINGS_YAWRATEPID_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWRATEKI:
				needsUpdate |= update(&stab.YawRatePID[STABILIZATIONSETTINGS_YAWRATEPID_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWRATEKD:
				needsUpdate |= update(&stab.YawRatePID[STABILIZATIONSETTINGS_YAWRATEPID_KD], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWRATEILIMIT:
				needsUpdate |= update(&stab.YawRatePID[STABILIZATIONSETTINGS_YAWRATEPID_ILIMIT], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWATTITUDEKP:
				needsUpdate |= update(&stab.YawPI[STABILIZATIONSETTINGS_YAWPI_KP], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWATTITUDEKI:
				needsUpdate |= update(&stab.YawPI[STABILIZATIONSETTINGS_YAWPI_KI], value);
				break;
			case TXPIDSETTINGS_PIDS_YAWATTITUDEILIMIT:
				needsUpdate |= update(&stab.YawPI[STABILIZATIONSETTINGS_YAWPI_ILIMIT], value);
				break;
			default:
				PIOS_Assert(0);
			}
		}
	}
	if (needsUpdate)
		StabilizationSettingsSet(&stab);
}

/**
 * Scales input val from [inMin..inMax] range to [outMin..outMax].
 * If val is out of input range (inMin <= inMax), it will be bound.
 * (outMin > outMax) is ok, in that case output will be decreasing.
 *
 * \returns scaled value
 */
static float scale(float val, float inMin, float inMax, float outMin, float outMax)
{
	// bound input value
	if (val > inMax) val = inMax;
	if (val < inMin) val = inMin;

	// normalize input value to [0..1]
	if (inMax <= inMin)
		val = 0.0;
	else
		val = (val - inMin) / (inMax - inMin);

	// update output bounds
	if (outMin > outMax) {
		float t = outMin;
		outMin = outMax;
		outMax = t;
		val = 1.0 - val;
	}

	return (outMax - outMin) * val + outMin;
}

/**
 * Updates var using val if needed.
 * \returns 1 if updated, 0 otherwise
 */
static uint8_t update(float *var, float val)
{
	if (*var != val) {
		*var = val;
		return 1;
	}
	return 0;
}

/**
  * @}
  */

/**
 * @}
 */