rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-01-18 03:52:11 +01:00
Code Issues Releases Activity
LibrePilot/shared/uavobjectdefinition/hwsettings.xml

28 lines
2.3 KiB
XML
Raw Normal View History

hwsettings: UAVObject to select hardware runtime hw config
2011-06-19 10:56:40 -04:00
<xml>
Make it possible to optionally enable the CameraStab module
2011-07-30 12:08:47 +09:00
<object name="HwSettings" singleinstance="true" settings="true">
<description>Selection of optional hardware configurations.</description>
CC: rename ReceiverPort PPM+Servo (Servo) options to PPM+Outputs (Outputs)
2011-12-11 22:52:51 +02:00
<field name="CC_RcvrPort" units="function" type="enum" elements="1" options="Disabled,PWM,PPM,PPM+Outputs,Outputs" defaultvalue="PWM"/>
com-bridge: add usart to usb vcp bridge
2011-12-21 21:04:29 -05:00
<field name="CC_MainPort" units="function" type="enum" elements="1" options="Disabled,Telemetry,GPS,S.Bus,DSM2,DSMX (10bit),DSMX (11bit),ComAux,ComBridge" defaultvalue="Disabled"/>
<field name="CC_FlexiPort" units="function" type="enum" elements="1" options="Disabled,Telemetry,GPS,I2C,DSM2,DSMX (10bit),DSMX (11bit),ComAux,ComBridge" defaultvalue="Disabled"/>
rcvr: support multiple simultaneous receivers Now also supports multiple instances of the Spektrum driver. These are configured as Spektrum1 and Spektrum2.
2011-07-30 15:04:24 -04:00
spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support - both CC serial ports are now disabled by default (no telemetry); - serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options; - ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options. For DSM2 protocol there is an explicit resolution bit in the stream, so the DSM2 should be selected. For DSMX there is no such bit, and user should choose the resolution from the list configuring the spektrum port. ReceiverGroups have single DSM option which is handled by the same driver. Downside: this implementation saves received frame first, unrolls by the end of frame. This should be ok, but may be improved by unrolling channels on the fly in the rx callback. Another minor difference is that a ChannelGroup is now bound to port: DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable solution in order to not have 6 DSM options for each ChannelGroup and even more in case of new DSM protocol variations. Known problem: it is not possible to choose same protocols like DSM2/DSM2 for two ports. It can be enabled by adding an exception to common rule, though. The DSMX throttle channel misbehavior (zero value) is not treated specially yet. It should trigger the failsafe being out of bounds. More info and data dumps are required to handle this properly.
2011-10-30 19:29:03 +02:00
<field name="OP_RcvrPort" units="function" type="enum" elements="1" options="Disabled,PWM,PPM,DSM2,DSMX (10bit),DSMX (11bit),Debug" defaultvalue="PWM"/>
Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG Conflicts: flight/CopterControl/Makefile flight/OpenPilot/System/pios_board.c flight/OpenPilot/UAVObjects.inc flight/PiOS/STM32F10x/pios_spektrum.c ground/openpilotgcs/src/plugins/config/config.pro ground/openpilotgcs/src/plugins/config/configgadget.qrc ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro shared/uavobjectdefinition/hwsettings.xml
2011-08-27 00:44:58 -05:00
<field name="OP_MainPort" units="function" type="enum" elements="1" options="Disabled,Telemetry" defaultvalue="Telemetry"/>
spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support - both CC serial ports are now disabled by default (no telemetry); - serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options; - ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options. For DSM2 protocol there is an explicit resolution bit in the stream, so the DSM2 should be selected. For DSMX there is no such bit, and user should choose the resolution from the list configuring the spektrum port. ReceiverGroups have single DSM option which is handled by the same driver. Downside: this implementation saves received frame first, unrolls by the end of frame. This should be ok, but may be improved by unrolling channels on the fly in the rx callback. Another minor difference is that a ChannelGroup is now bound to port: DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable solution in order to not have 6 DSM options for each ChannelGroup and even more in case of new DSM protocol variations. Known problem: it is not possible to choose same protocols like DSM2/DSM2 for two ports. It can be enabled by adding an exception to common rule, though. The DSMX throttle channel misbehavior (zero value) is not treated specially yet. It should trigger the failsafe being out of bounds. More info and data dumps are required to handle this properly.
2011-10-30 19:29:03 +02:00
<field name="OP_FlexiPort" units="function" type="enum" elements="1" options="Disabled,GPS" defaultvalue="GPS"/>
Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG Conflicts: flight/CopterControl/Makefile flight/OpenPilot/System/pios_board.c flight/OpenPilot/UAVObjects.inc flight/PiOS/STM32F10x/pios_spektrum.c ground/openpilotgcs/src/plugins/config/config.pro ground/openpilotgcs/src/plugins/config/configgadget.qrc ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro shared/uavobjectdefinition/hwsettings.xml
2011-08-27 00:44:58 -05:00
HwSettings: move Telemetry and add GPS port speed to the HwSettings object TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry port speed moved to the HwSettings object. Added GPS port speed setting. GCS code updated to reflect changes and support both fields.
2011-09-28 22:09:19 +03:00
<field name="TelemetrySpeed" units="bps" type="enum" elements="1" options="2400,4800,9600,19200,38400,57600,115200" defaultvalue="57600"/>
<field name="GPSSpeed" units="bps" type="enum" elements="1" options="2400,4800,9600,19200,38400,57600,115200" defaultvalue="57600"/>
com-bridge: Make com-bridge an optional (and configurable) module
2011-12-28 12:24:32 -05:00
<field name="ComUsbBridgeSpeed" units="bps" type="enum" elements="1" options="2400,4800,9600,19200,38400,57600,115200" defaultvalue="57600"/>
usb: allow runtime selection of USB descriptors via hwsettings
2012-01-14 14:17:06 -05:00
<field name="USB_DeviceType" units="descriptor" type="enum" elements="1" options="HID-only,HID+VCP,VCP-only" defaultvalue="HID-only"/>
usb-hid: split apart hwsettings for HID and VCP ports This allows the HID and VCP functions to be configured separately so that additional functions can be more easily bound to the VCP port. This change also provides a safety net that forces either the HID or VCP to be configured for USB Telemetry. This safety net may vanish in the future once the GCS can check it. Disabling USB Telemetry entirely would save more than 400 bytes of RAM.
2011-12-28 16:16:29 -05:00
<field name="USB_HIDPort" units="function" type="enum" elements="1" options="USBTelemetry,Disabled" defaultvalue="USBTelemetry"/>
<field name="USB_VCPPort" units="function" type="enum" elements="1" options="USBTelemetry,ComBridge,Disabled" defaultvalue="Disabled"/>
HwSettings: move Telemetry and add GPS port speed to the HwSettings object TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry port speed moved to the HwSettings object. Added GPS port speed setting. GCS code updated to reflect changes and support both fields.
2011-09-28 22:09:19 +03:00
altitude: allow altitude to be an optional module
2012-01-14 15:04:49 -05:00
<field name="OptionalModules" units="" type="enum" elementnames="CameraStab,GPS,ComUsbBridge,Fault,Altitude" options="Disabled,Enabled" defaultvalue="Disabled"/>
Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next Conflicts: shared/uavobjectdefinition/hwsettings.xml
2011-08-24 11:37:30 -05:00
<field name="DSMxBind" units="" type="uint8" elements="1" defaultvalue="0"/>
Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG Conflicts: flight/CopterControl/Makefile flight/OpenPilot/System/pios_board.c flight/OpenPilot/UAVObjects.inc flight/PiOS/STM32F10x/pios_spektrum.c ground/openpilotgcs/src/plugins/config/config.pro ground/openpilotgcs/src/plugins/config/configgadget.qrc ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro shared/uavobjectdefinition/hwsettings.xml
2011-08-27 00:44:58 -05:00
Make it possible to optionally enable the CameraStab module
2011-07-30 12:08:47 +09:00
<access gcs="readwrite" flight="readwrite"/>
<telemetrygcs acked="true" updatemode="onchange" period="0"/>
<telemetryflight acked="true" updatemode="onchange" period="0"/>
<logging updatemode="never" period="0"/>
hwsettings: UAVObject to select hardware runtime hw config
2011-06-19 10:56:40 -04:00
</object>
</xml>
Reference in New Issue Copy Permalink