1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
LibrePilot/flight/PiOS/Boards/STM32103CB_CC_Rev1.h

284 lines
9.9 KiB
C
Raw Normal View History

/**
******************************************************************************
*
* @file pios_board.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef STM32103CB_CC_H_
#define STM32103CB_CC_H_
//------------------------
// Timers and Channels Used
//------------------------
/*
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
------+-----------+-----------+-----------+----------
TIM1 | Servo 4 | | |
TIM2 | RC In 5 | RC In 6 | Servo 6 |
TIM3 | Servo 5 | RC In 2 | RC In 3 | RC In 4
TIM4 | RC In 1 | Servo 3 | Servo 2 | Servo 1
------+-----------+-----------+-----------+----------
*/
//------------------------
// DMA Channels Used
//------------------------
/* Channel 1 - */
/* Channel 2 - */
/* Channel 3 - */
/* Channel 4 - */
/* Channel 5 - */
/* Channel 6 - */
/* Channel 7 - */
/* Channel 8 - */
/* Channel 9 - */
/* Channel 10 - */
/* Channel 11 - */
/* Channel 12 - */
//------------------------
// BOOTLOADER_SETTINGS
//------------------------
//#define FUNC_ID 2
//#define HW_VERSION 69
#define BOOTLOADER_VERSION 0
#define BOARD_TYPE 0x04
#define BOARD_REVISION 0x01
//#define HW_VERSION (BOARD_TYPE << 8) | BOARD_REVISION
#define MEM_SIZE 0x20000 //128K
#define SIZE_OF_DESCRIPTION 100
#define START_OF_USER_CODE (uint32_t)0x08003000
#define SIZE_OF_CODE (uint32_t)(MEM_SIZE-(START_OF_USER_CODE-0x08000000)-SIZE_OF_DESCRIPTION)
#ifdef STM32F10X_HD
#define HW_TYPE 0 //0=high_density 1=medium_density;
#elif STM32F10X_MD
#define HW_TYPE 1 //0=high_density 1=medium_density;
#endif
#define BOARD_READABLE TRUE
#define BOARD_WRITABLA TRUE
#define MAX_DEL_RETRYS 3
//------------------------
// WATCHDOG_SETTINGS
//------------------------
#define PIOS_WATCHDOG_TIMEOUT 250
#define PIOS_WDG_REGISTER BKP_DR4
#define PIOS_WDG_ACTUATOR 0x0001
#define PIOS_WDG_STABILIZATION 0x0002
#define PIOS_WDG_ATTITUDE 0x0004
#define PIOS_WDG_MANUAL 0x0008
//------------------------
// TELEMETRY
//------------------------
#define TELEM_QUEUE_SIZE 20
//------------------------
// PIOS_LED
//------------------------
#define PIOS_LED_LED1_GPIO_PORT GPIOA
#define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_6
#define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOA
#define PIOS_LED_NUM 1
#define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT }
#define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN }
#define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK }
//-------------------------
// Delay Timer
//-------------------------
#define PIOS_DELAY_TIMER TIM3
#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE)
//-------------------------
// System Settings
//-------------------------
#define PIOS_MASTER_CLOCK 72000000
#define PIOS_PERIPHERAL_CLOCK (PIOS_MASTER_CLOCK / 2)
#if defined(USE_BOOTLOADER)
#define PIOS_NVIC_VECTTAB_FLASH (START_OF_USER_CODE)
#else
#define PIOS_NVIC_VECTTAB_FLASH ((uint32_t)0x08000000)
#endif
//-------------------------
// Interrupt Priorities
//-------------------------
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
//------------------------
// PIOS_I2C
// See also pios_board.c
//------------------------
#define PIOS_I2C_MAX_DEVS 1
extern uint32_t pios_i2c_main_adapter_id;
#define PIOS_I2C_MAIN_ADAPTER (pios_i2c_main_adapter_id)
//-------------------------
// SPI
//
// See also pios_board.c
//-------------------------
#define PIOS_SPI_MAX_DEVS 2
//-------------------------
// PIOS_USART
//-------------------------
#define PIOS_USART_MAX_DEVS 2
#define PIOS_USART_RX_BUFFER_SIZE 256
#define PIOS_USART_TX_BUFFER_SIZE 256
//-------------------------
// PIOS_COM
//
// See also pios_board.c
//-------------------------
#define PIOS_COM_MAX_DEVS 4
#define PIOS_COM_TELEM_BAUDRATE 57600
extern uint32_t pios_com_telem_rf_id;
#define PIOS_COM_TELEM_RF (pios_com_telem_rf_id)
#define PIOS_COM_DEBUG PIOS_COM_TELEM_RF
#if defined(PIOS_INCLUDE_GPS)
#define PIOS_COM_GPS_BAUDRATE 57600
extern uint32_t pios_com_gps_id;
#define PIOS_COM_GPS (pios_com_gps_id)
#endif /* PIOS_INCLUDE_GPS */
extern uint32_t pios_com_telem_usb_id;
#define PIOS_COM_TELEM_USB (pios_com_telem_usb_id)
#ifdef PIOS_INCLUDE_SPEKTRUM
#define PIOS_COM_SPEKTRUM_BAUDRATE 115200
extern uint32_t pios_com_spektrum_id;
#define PIOS_COM_SPEKTRUM (pios_com_spektrum_id)
#endif
//-------------------------
// ADC
// PIOS_ADC_PinGet(0) = Gyro Z
// PIOS_ADC_PinGet(1) = Gyro Y
// PIOS_ADC_PinGet(2) = Gyro X
//-------------------------
//#define PIOS_ADC_OVERSAMPLING_RATE 1
#define PIOS_ADC_USE_TEMP_SENSOR 1
#define PIOS_ADC_TEMP_SENSOR_ADC ADC1
#define PIOS_ADC_TEMP_SENSOR_ADC_CHANNEL 1
#define PIOS_ADC_PIN1_GPIO_PORT GPIOA // PA4 (Gyro X)
#define PIOS_ADC_PIN1_GPIO_PIN GPIO_Pin_4 // ADC12_IN4
#define PIOS_ADC_PIN1_GPIO_CHANNEL ADC_Channel_4
#define PIOS_ADC_PIN1_ADC ADC2
#define PIOS_ADC_PIN1_ADC_NUMBER 1
#define PIOS_ADC_PIN2_GPIO_PORT GPIOA // PA5 (Gyro Y)
#define PIOS_ADC_PIN2_GPIO_PIN GPIO_Pin_5 // ADC123_IN5
#define PIOS_ADC_PIN2_GPIO_CHANNEL ADC_Channel_5
#define PIOS_ADC_PIN2_ADC ADC1
#define PIOS_ADC_PIN2_ADC_NUMBER 2
#define PIOS_ADC_PIN3_GPIO_PORT GPIOA // PA3 (Gyro Z)
#define PIOS_ADC_PIN3_GPIO_PIN GPIO_Pin_3 // ADC12_IN3
#define PIOS_ADC_PIN3_GPIO_CHANNEL ADC_Channel_3
#define PIOS_ADC_PIN3_ADC ADC2
#define PIOS_ADC_PIN3_ADC_NUMBER 2
#define PIOS_ADC_NUM_PINS 3
#define PIOS_ADC_PORTS { PIOS_ADC_PIN1_GPIO_PORT, PIOS_ADC_PIN2_GPIO_PORT, PIOS_ADC_PIN3_GPIO_PORT }
#define PIOS_ADC_PINS { PIOS_ADC_PIN1_GPIO_PIN, PIOS_ADC_PIN2_GPIO_PIN, PIOS_ADC_PIN3_GPIO_PIN }
#define PIOS_ADC_CHANNELS { PIOS_ADC_PIN1_GPIO_CHANNEL, PIOS_ADC_PIN2_GPIO_CHANNEL, PIOS_ADC_PIN3_GPIO_CHANNEL }
#define PIOS_ADC_MAPPING { PIOS_ADC_PIN1_ADC, PIOS_ADC_PIN2_ADC, PIOS_ADC_PIN3_ADC }
#define PIOS_ADC_CHANNEL_MAPPING { PIOS_ADC_PIN1_ADC_NUMBER, PIOS_ADC_PIN2_ADC_NUMBER, PIOS_ADC_PIN3_ADC_NUMBER }
#define PIOS_ADC_NUM_CHANNELS (PIOS_ADC_NUM_PINS + PIOS_ADC_USE_TEMP_SENSOR)
#define PIOS_ADC_NUM_ADC_CHANNELS 2
#define PIOS_ADC_USE_ADC2 1
#define PIOS_ADC_CLOCK_FUNCTION RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE)
#define PIOS_ADC_ADCCLK RCC_PCLK2_Div8
/* RCC_PCLK2_Div2: ADC clock = PCLK2/2 */
/* RCC_PCLK2_Div4: ADC clock = PCLK2/4 */
/* RCC_PCLK2_Div6: ADC clock = PCLK2/6 */
/* RCC_PCLK2_Div8: ADC clock = PCLK2/8 */
#define PIOS_ADC_SAMPLE_TIME ADC_SampleTime_239Cycles5
/* Sample time: */
/* With an ADCCLK = 14 MHz and a sampling time of 239.5 cycles: */
/* Tconv = 239.5 + 12.5 = 252 cycles = 18<31>s */
/* (1 / (ADCCLK / CYCLES)) = Sample Time (<28>S) */
#define PIOS_ADC_IRQ_PRIO PIOS_IRQ_PRIO_LOW
// Currently analog acquistion hard coded at 480 Hz
// PCKL2 = HCLK / 16
// ADCCLK = PCLK2 / 2
#define PIOS_ADC_RATE (72.0e6 / 1.0 / 8.0 / 252.0 / (PIOS_ADC_NUM_CHANNELS >> PIOS_ADC_USE_ADC2))
#define PIOS_ADC_MAX_OVERSAMPLING 36
//-------------------------
// Receiver PWM inputs
//-------------------------
#define PIOS_PWM_MAX_INPUTS 6
//-------------------------
// Servo outputs
//-------------------------
#define PIOS_SERVO_UPDATE_HZ 50
#define PIOS_SERVOS_INITIAL_POSITION 0 /* dont want to start motors, have no pulse till settings loaded */
//-------------------------
// GPIO
//-------------------------
#define PIOS_GPIO_1_PORT GPIOA
#define PIOS_GPIO_1_PIN GPIO_Pin_7
#define PIOS_GPIO_1_GPIO_CLK RCC_APB2Periph_GPIOA
#define PIOS_GPIO_PORTS { PIOS_GPIO_1_PORT }
#define PIOS_GPIO_PINS { PIOS_GPIO_1_PIN }
#define PIOS_GPIO_CLKS { PIOS_GPIO_1_GPIO_CLK }
#define PIOS_GPIO_NUM 1
#define PIOS_FLASH_CS_PIN 0
#define PIOS_FLASH_ENABLE PIOS_GPIO_On(0)
#define PIOS_FLASH_DISABLE PIOS_GPIO_Off(0)
#define PIOS_ADXL_ENABLE PIOS_SPI_RC_PinSet(PIOS_SPI_ACCEL,0)
#define PIOS_ADXL_DISABLE PIOS_SPI_RC_PinSet(PIOS_SPI_ACCEL,1)
//-------------------------
// USB
//-------------------------
#define PIOS_USB_ENABLED 1
#define PIOS_USB_DETECT_GPIO_PORT GPIOC
#define PIOS_USB_DETECT_GPIO_PIN GPIO_Pin_15
#define PIOS_USB_DETECT_EXTI_LINE EXTI_Line15
#define PIOS_IRQ_USB_PRIORITY PIOS_IRQ_PRIO_MID
#define PIOS_USB_RX_BUFFER_SIZE 128
#define PIOS_USB_TX_BUFFER_SIZE 128
#endif /* STM32103CB_AHRS_H_ */