LibrePilot/flight/Project/OpenOCD/stlink-v2.cfg

#
# STMicroelectronics ST-LINK/V2 in-circuit debugger/programmer
#

interface stlink
stlink_layout usb
stlink_device_desc "ST-LINK/V2"
stlink_vid_pid 0x0483 0x3748

# unused but set to disable warnings
adapter_khz 1000

#reset_config trst_and_srst
reset_config srst_only srst_nogate

gdb_port 3333
tcl_port 6666
telnet_port 4444
openocd: add support for stlink on stm32f4 targets 2012-02-03 05:49:57 +01:00			`#`
			`# STMicroelectronics ST-LINK/V2 in-circuit debugger/programmer`
			`#`

			`interface stlink`
			`stlink_layout usb`
			`stlink_device_desc "ST-LINK/V2"`
			`stlink_vid_pid 0x0483 0x3748`
makefile: update to released openocd 0.6.1 2012-11-18 01:16:31 +01:00
			`# unused but set to disable warnings`
			`adapter_khz 1000`

			`#reset_config trst_and_srst`
			`reset_config srst_only srst_nogate`
openocd: add support for stlink on stm32f4 targets 2012-02-03 05:49:57 +01:00
			`gdb_port 3333`
			`tcl_port 6666`
			`telnet_port 4444`