rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-02-26 15:54:15 +01:00
Code Issues Releases Activity

OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo

Browse Source
This commit is contained in:
Stefan Karlsson 2014-10-06 21:23:35 +02:00
parent b01eb1d3e4
commit 004f5a32a9
3 changed files with 60 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
flight/targets/boards/revolution/board_hw_defs.c
View File

@ -1092,6 +1092,53 @@ static const struct pios_usart_cfg pios_usart_hkosd_flexi_cfg = {
},
};
static const struct pios_usart_cfg pios_usart_rcvrport_cfg = {
.regs = USART6,
.remap = GPIO_AF_USART6,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART6_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.tx = {
// * 7: PC6 = TIM8 CH1, USART6 TX
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
.pin_source = GPIO_PinSource6,
},
.rx = {
// * 8: PC7 = TIM8 CH2, USART6 RX
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
.pin_source = GPIO_PinSource7,
}
};
#if defined(PIOS_INCLUDE_COM)
#include <pios_com_priv.h>

14
flight/targets/boards/revolution/firmware/pios_board.c
View File

@ -880,25 +880,35 @@ void PIOS_Board_Init(void)
case HWSETTINGS_RM_RCVRPORT_PPM:
case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_RM_RCVRPORT_PPMPWM:
case HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY:
#if defined(PIOS_INCLUDE_PPM)
PIOS_Board_configure_ppm(&pios_ppm_cfg);
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS) {
// configure servo outputs and the remaining 5 inputs as outputs
pios_servo_cfg = &pios_servo_cfg_out_in_ppm;
}
PIOS_Board_configure_ppm(&pios_ppm_cfg);
// enable pwm on the remaining channels
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMPWM) {
PIOS_Board_configure_pwm(&pios_pwm_ppm_cfg);
}
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY) {
PIOS_Board_configure_com(&pios_usart_rcvrport_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
}
break;
#endif /* PIOS_INCLUDE_PPM */
case HWSETTINGS_RM_RCVRPORT_OUTPUTS:
// configure only the servo outputs
pios_servo_cfg = &pios_servo_cfg_out_in;
break;
case HWSETTINGS_RM_RCVRPORT_TELEMETRY:
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY) {
PIOS_Board_configure_com(&pios_usart_rcvrport_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
}
break;
}

2
shared/uavobjectdefinition/hwsettings.xml
View File

@ -12,7 +12,7 @@
<field name="RV_TelemetryPort" units="function" type="enum" elements="1" options="Disabled,Telemetry,ComAux,ComBridge" defaultvalue="Telemetry"/>
<field name="RV_GPSPort" units="function" type="enum" elements="1" options="Disabled,Telemetry,GPS,ComAux,ComBridge" defaultvalue="GPS"/>
<field name="RM_RcvrPort" units="function" type="enum" elements="1" options="Disabled,PWM,PPM,PPM+PWM,PPM+Outputs,Outputs" defaultvalue="PWM"/>
<field name="RM_RcvrPort" units="function" type="enum" elements="1" options="Disabled,PWM,PPM,PPM+PWM,PPM+Telemetry,PPM+Outputs,Outputs,Telemetry" defaultvalue="PWM"/>
<field name="RM_MainPort" units="function" type="enum" elements="1" options="Disabled,Telemetry,GPS,S.Bus,DSM2,DSMX (10bit),DSMX (11bit),DebugConsole,ComBridge,OsdHk" defaultvalue="Disabled"/>
<field name="RM_FlexiPort" units="function" type="enum" elements="1" options="Disabled,Telemetry,GPS,I2C,DSM2,DSMX (10bit),DSMX (11bit),DebugConsole,ComBridge,OsdHk" defaultvalue="Disabled"/>