rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-01 09:24:10 +01:00
Code Issues Releases Activity

General tidy up of code to a consistent code format.

Browse Source 
Removed usb_conf.h as there is much more needed for usb than just it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@9 ebee16cc-31ac-478f-84a7-5cbb03baadba
This commit is contained in:
gussy 2009-11-28 16:20:16 +00:00 committed by gussy
parent bd25f9384a
commit 25f153a680
6 changed files with 25 additions and 161 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
flight/sys/pios_led.c
View File

@ -34,16 +34,13 @@ const uint32_t LED_GPIO_CLK[NUM_LED] = {LED1_GPIO_CLK, LED2_GPIO_CLK};
/* Initialises all the LED's */
void LED_INIT(void)
{
for(int LEDNum = 0; LEDNum < NUM_LED; LEDNum++)
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
for(int LEDNum = 0; LEDNum < NUM_LED; LEDNum++) {
RCC_APB2PeriphClockCmd(LED_GPIO_CLK[LEDNum], ENABLE);
GPIO_InitStructure.GPIO_Pin = LED_GPIO_PIN[LEDNum];
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(LED_GPIO_PORT[LEDNum], &GPIO_InitStructure);
}
}

13
flight/sys/pios_settings.c
View File

@ -40,17 +40,12 @@ void LoadSettings(void)
long Result;
/* Section: GPS */
Settings.GPS.Baudrate = ini_getl("GPS", "Baudrate", GPS_BAUDRATE, SETTINGS_FILE);
Settings.GPS.Baudrate = (uint32_t) ini_getl("GPS", "Baudrate", GPS_BAUDRATE, SETTINGS_FILE);
/* Section: Telemetry */
Settings.Telem.Baudrate = ini_getl("Telemetry", "Baudrate", TELEM_BAUDRATE, SETTINGS_FILE);
Settings.Telem.Baudrate = (uint32_t) ini_getl("Telemetry", "Baudrate", TELEM_BAUDRATE, SETTINGS_FILE);
/* Section: Auxillary_UART */
Settings.AuxUART.Enabled = ini_getl("Auxillary_UART", "Enabled", AUXUART_ENABLED, SETTINGS_FILE);
Settings.AuxUART.Baudrate = ini_getl("Auxillary_UART", "Baudrate", AUXUART_BAUDRATE, SETTINGS_FILE);
Settings.AuxUART.Enabled = (bool) ini_getl("Auxillary_UART", "Enabled", AUXUART_ENABLED, SETTINGS_FILE);
Settings.AuxUART.Baudrate = (uint32_t) ini_getl("Auxillary_UART", "Baudrate", AUXUART_BAUDRATE, SETTINGS_FILE);
}
int foo(void)
{
return 0;
}

4
flight/sys/pios_settings.h
View File

@ -30,11 +30,11 @@
/* Default Values */
/* GPSUART Default Values */
#define GPS_BAUDRATE 19200
#define GPS_BAUDRATE 19200
#define TELEM_BAUDRATE 19200
#define AUXUART_ENABLED 1
#define AUXUART_ENABLED 0
#define AUXUART_BAUDRATE 19200
/* Global types */

12
flight/sys/pios_sys.c
View File

@ -43,9 +43,12 @@ void SysInit(void)
LED_INIT();
/* Initialize FatFS disk */
if(f_mount(0, &Fatfs[0]) != FR_OK)
{
//Failed to mount MicroSD filesystem, should we do something?
if(f_mount(0, &Fatfs[0]) != FR_OK) {
/* Failed to mount MicroSD filesystem, flash LED1 forever */
while(1) {
for(int i = 0; i < 1000; i++);
LED_TOGGLE(LED1);
}
}
LoadSettings();
@ -61,6 +64,7 @@ void SysInit(void)
*******************************************************************************/
void GPIO_Configuration(void)
{
}
/*******************************************************************************
@ -70,7 +74,6 @@ void GPIO_Configuration(void)
* Output : None
* Return : None
*******************************************************************************/
void NVIC_Configuration(void)
{
/* Set the Vector Table base address as specified in .ld file */
@ -80,4 +83,3 @@ void NVIC_Configuration(void)
/* Configure HCLK clock as SysTick clock source. */
SysTick_CLKSourceConfig( SysTick_CLKSource_HCLK );
}

12
flight/sys/pios_uart.c
View File

@ -1,3 +1,4 @@
/**
* Project: OpenPilot
*
@ -122,6 +123,10 @@ void UARTInit(void)
USART_Cmd(GPS_UART, ENABLE);
USART_Cmd(TELEM_UART, ENABLE);
if(Settings.AuxUART.Enabled == 1) {
EnableAuxUART();
}
}
void EnableAuxUART(void)
@ -148,12 +153,9 @@ void UARTChangeBaud(USART_TypeDef* USARTx, uint32_t Baud)
RCC_ClocksTypeDef RCC_ClocksStatus;
RCC_GetClocksFreq(&RCC_ClocksStatus);
if (usartxbase == USART1_BASE)
{
if (usartxbase == USART1_BASE) {
apbclock = RCC_ClocksStatus.PCLK2_Frequency;
}
else
{
} else {
apbclock = RCC_ClocksStatus.PCLK1_Frequency;
}

132
flight/sys/usb_conf.h
View File

@ -1,132 +0,0 @@
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : usb_conf.h
* Author : MCD Application Team
* Version : V3.1.0
* Date : 10/30/2009
* Description : Mass Storage Demo configuration header
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CONF_H
#define __USB_CONF_H
/*-------------------------------------------------------------*/
/* EP_NUM */
/* defines how many endpoints are used by the device */
/*-------------------------------------------------------------*/
#define EP_NUM (3)
#ifndef STM32F10X_CL
/*-------------------------------------------------------------*/
/* -------------- Buffer Description Table -----------------*/
/*-------------------------------------------------------------*/
/* buffer table base address */
#define BTABLE_ADDRESS (0x00)
/* EP0 */
/* rx/tx buffer base address */
#define ENDP0_RXADDR (0x18)
#define ENDP0_TXADDR (0x58)
/* EP1 */
/* tx buffer base address */
#define ENDP1_TXADDR (0x98)
/* EP2 */
/* Rx buffer base address */
#define ENDP2_RXADDR (0xD8)
/* ISTR events */
/* IMR_MSK */
/* mask defining which events has to be handled */
/* by the device application software */
#define IMR_MSK (CNTR_CTRM | CNTR_RESETM)
#endif /* STM32F10X_CL */
/* CTR service routines */
/* associated to defined endpoints */
//#define EP1_IN_Callback NOP_Process
#define EP2_IN_Callback NOP_Process
#define EP3_IN_Callback NOP_Process
#define EP4_IN_Callback NOP_Process
#define EP5_IN_Callback NOP_Process
#define EP6_IN_Callback NOP_Process
#define EP7_IN_Callback NOP_Process
#define EP1_OUT_Callback NOP_Process
//#define EP2_OUT_Callback NOP_Process
#define EP3_OUT_Callback NOP_Process
#define EP4_OUT_Callback NOP_Process
#define EP5_OUT_Callback NOP_Process
#define EP6_OUT_Callback NOP_Process
#define EP7_OUT_Callback NOP_Process
#ifdef STM32F10X_CL
/* OTGD-FS-DEVICE IP interrupts Enable definitions */
/* Uncomment the define to enable the selected interrupt */
//#define INTR_MODEMISMATCH
#define INTR_SOFINTR
#define INTR_RXSTSQLVL /* Mandatory */
//#define INTR_NPTXFEMPTY
//#define INTR_GINNAKEFF
//#define INTR_GOUTNAKEFF
//#define INTR_ERLYSUSPEND
#define INTR_USBSUSPEND /* Mandatory */
#define INTR_USBRESET /* Mandatory */
#define INTR_ENUMDONE /* Mandatory */
//#define INTR_ISOOUTDROP
#define INTR_EOPFRAME
//#define INTR_EPMISMATCH
#define INTR_INEPINTR /* Mandatory */
#define INTR_OUTEPINTR /* Mandatory */
//#define INTR_INCOMPLISOIN
//#define INTR_INCOMPLISOOUT
#define INTR_WKUPINTR /* Mandatory */
/* OTGD-FS-DEVICE IP interrupts subroutines */
/* Comment the define to enable the selected interrupt subroutine and replace it
by user code */
#define INTR_MODEMISMATCH_Callback NOP_Process
#define INTR_SOFINTR_Callback NOP_Process
#define INTR_RXSTSQLVL_Callback NOP_Process
#define INTR_NPTXFEMPTY_Callback NOP_Process
#define INTR_NPTXFEMPTY_Callback NOP_Process
#define INTR_GINNAKEFF_Callback NOP_Process
#define INTR_GOUTNAKEFF_Callback NOP_Process
#define INTR_ERLYSUSPEND_Callback NOP_Process
#define INTR_USBSUSPEND_Callback NOP_Process
#define INTR_USBRESET_Callback NOP_Process
#define INTR_ENUMDONE_Callback NOP_Process
#define INTR_ISOOUTDROP_Callback NOP_Process
#define INTR_EOPFRAME_Callback NOP_Process
#define INTR_EPMISMATCH_Callback NOP_Process
#define INTR_INEPINTR_Callback NOP_Process
#define INTR_OUTEPINTR_Callback NOP_Process
#define INTR_INCOMPLISOIN_Callback NOP_Process
#define INTR_INCOMPLISOOUT_Callback NOP_Process
#define INTR_WKUPINTR_Callback NOP_Process
/* Isochronous data update */
#define INTR_RXSTSQLVL_ISODU_Callback NOP_Process
/* Isochronous transfer parameters */
/* Size of a single Isochronous buffer (size of a single transfer) */
#define ISOC_BUFFER_SZE 1
/* Number of sub-buffers (number of single buffers/transfers), should be even */
#define NUM_SUB_BUFFERS 2
#endif /* STM32F10X_CL */
#endif /* __USB_CONF_H */
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/