1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-02-20 10:54:14 +01:00

Merged in LP-618_CC3D_erase_settings_problem (pull request #541)

LP-618 CC3D erase or save settings and wizard mixer error fix

Approved-by: Eric Price
This commit is contained in:
TheOtherCliff 2022-02-15 23:28:12 +00:00 committed by Eric Price
commit 299fcfda73

View File

@ -39,7 +39,7 @@ const struct pios_flash_jedec_cfg pios_flash_jedec_catalog[] =
{ // m25p16
.expect_manufacturer = JEDEC_MANUFACTURER_ST,
.expect_memorytype = 0x20,
.expect_capacity = 0x15,
.expect_capacity = 0x15, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8,
.chip_erase = 0xC7,
.fast_read = 0x0B,
@ -48,7 +48,7 @@ const struct pios_flash_jedec_cfg pios_flash_jedec_catalog[] =
{ // m25px16
.expect_manufacturer = JEDEC_MANUFACTURER_ST,
.expect_memorytype = 0x71,
.expect_capacity = 0x15,
.expect_capacity = 0x15, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8,
.chip_erase = 0xC7,
.fast_read = 0x0B,
@ -57,43 +57,43 @@ const struct pios_flash_jedec_cfg pios_flash_jedec_catalog[] =
{ // w25x
.expect_manufacturer = JEDEC_MANUFACTURER_WINBOND,
.expect_memorytype = 0x30,
.expect_capacity = 0x13,
.sector_erase = 0x20,
.chip_erase = 0x60,
.expect_capacity = 0x13, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8, // 0xD8 is the 64k sector erase command, 0x20 erases 4k sectors, flashfs_m25p_cfg has fixed 64k sectors
.chip_erase = 0x60, // chip_erase is 0x60 or 0xC7
.fast_read = 0x0B,
.fast_read_dummy_bytes = 1,
},
{ // 25q16
.expect_manufacturer = JEDEC_MANUFACTURER_WINBOND,
.expect_memorytype = 0x40,
.expect_capacity = 0x15,
.sector_erase = 0x20,
.chip_erase = 0x60,
.expect_capacity = 0x15, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8, // 0xD8 is the 64k sector erase command, 0x20 erases 4k sectors, flashfs_m25p_cfg has fixed 64k sectors
.chip_erase = 0x60, // chip_erase is 0x60 or 0xC7
.fast_read = 0x0B,
.fast_read_dummy_bytes = 1,
},
{ // 25q64
.expect_manufacturer = JEDEC_MANUFACTURER_WINBOND,
.expect_memorytype = 0x40,
.expect_capacity = 0x17,
.sector_erase = 0x20,
.chip_erase = 0x60,
.expect_capacity = 0x17, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8, // 0xD8 is the 64k sector erase command, 0x20 erases 4k sectors, flashfs_m25p_cfg has fixed 64k sectors
.chip_erase = 0x60, // chip_erase is 0x60 or 0xC7
.fast_read = 0x0B,
.fast_read_dummy_bytes = 1,
},
{ // 25q512
{ // 25q512, note that devices over 128Mb=16MB probably require recoding to use 4 byte addresses
.expect_manufacturer = JEDEC_MANUFACTURER_MICRON,
.expect_memorytype = 0xBA,
.expect_capacity = 0x20,
.sector_erase = 0xD8,
.expect_capacity = 0x1A, // pretty sure this should be 0x1A and not 0x20 (author counted 0x19 then 0x20, should have been 0x1A)
.sector_erase = 0xD8, // (these chips all have 2^expect_capacity bytes)
.chip_erase = 0xC7,
.fast_read = 0x0B,
.fast_read_dummy_bytes = 1,
},
{ // 25q256
{ // 25q256, note that devices over 128Mb=16MB probably require recoding to use 4 byte addresses
.expect_manufacturer = JEDEC_MANUFACTURER_NUMORIX,
.expect_memorytype = 0xBA,
.expect_capacity = 0x19,
.expect_capacity = 0x19, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8,
.chip_erase = 0xC7,
.fast_read = 0x0B,
@ -102,7 +102,7 @@ const struct pios_flash_jedec_cfg pios_flash_jedec_catalog[] =
{ // 25q128
.expect_manufacturer = JEDEC_MANUFACTURER_MICRON,
.expect_memorytype = 0xBA,
.expect_capacity = 0x18,
.expect_capacity = 0x18, // these chips all have 2^expect_capacity bytes
.sector_erase = 0xD8,
.chip_erase = 0xC7,
.fast_read = 0x0B,