mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-11-29 07:24:13 +01:00
Added PipXtreme folder.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1954 ebee16cc-31ac-478f-84a7-5cbb03baadba
This commit is contained in:
pip
pip
parent
0f7e0cf4db
commit
a3ac3feae9
570
flight/PipXtreme/Makefile
Normal file
570
flight/PipXtreme/Makefile
Normal file
@ -0,0 +1,570 @@
|
||||
#####
|
||||
# Project: OpenPilot PipBee Modems
|
||||
#
|
||||
#
|
||||
# Makefile for OpenPilot PipBee project
|
||||
#
|
||||
# The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
|
||||
#
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation; either version 3 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful, but
|
||||
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
# for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License along
|
||||
# with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
#####
|
||||
|
||||
|
||||
# Set developer code and compile options
|
||||
# Set to YES for debugging
|
||||
DEBUG ?= YES
|
||||
USE_BOOTLOADER ?= NO
|
||||
|
||||
# Set to YES when using Code Sourcery toolchain
|
||||
CODE_SOURCERY ?= YES
|
||||
|
||||
# Toolchain prefix (i.e arm-elf- -> arm-elf-gcc.exe)
|
||||
TCHAIN_PREFIX = arm-none-eabi-
|
||||
|
||||
ifeq ($(CODE_SOURCERY), YES)
|
||||
REMOVE_CMD = cs-rm
|
||||
else
|
||||
REMOVE_CMD = rm
|
||||
endif
|
||||
|
||||
FLASH_TOOL = OPENOCD
|
||||
|
||||
# YES enables -mthumb option to flags for source-files listed
|
||||
# in SRC and CPPSRC
|
||||
USE_THUMB_MODE = YES
|
||||
|
||||
# MCU name, submodel and board
|
||||
# - MCU used for compiler-option (-mcpu)
|
||||
# - MODEL used for linker-script name (-T) and passed as define
|
||||
# - BOARD just passed as define (optional)
|
||||
MCU = cortex-m3
|
||||
CHIP = STM32F103CBT
|
||||
BOARD = STM32103CB_PIPBEE
|
||||
ifeq ($(USE_BOOTLOADER), YES)
|
||||
MODEL = MD
|
||||
else
|
||||
MODEL = MD
|
||||
endif
|
||||
|
||||
# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
|
||||
OUTDIR = Build
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = PipBee
|
||||
|
||||
# Paths
|
||||
PIPBEE = ./
|
||||
PIPBEEINC = $(PIPBEE)/inc
|
||||
PIOS = ../PiOS
|
||||
PIOSINC = $(PIOS)/inc
|
||||
FLIGHTLIB = ../Libraries
|
||||
FLIGHTLIBINC = ../Libraries/inc
|
||||
PIOSSTM32F10X = $(PIOS)/STM32F10x
|
||||
PIOSCOMMON = $(PIOS)/Common
|
||||
APPLIBDIR = $(PIOSSTM32F10X)/Libraries
|
||||
STMLIBDIR = $(APPLIBDIR)
|
||||
STMSPDDIR = $(STMLIBDIR)/STM32F10x_StdPeriph_Driver
|
||||
STMUSBDIR = $(STMLIBDIR)/STM32_USB-FS-Device_Driver
|
||||
STMSPDSRCDIR = $(STMSPDDIR)/src
|
||||
STMSPDINCDIR = $(STMSPDDIR)/inc
|
||||
CMSISDIR = $(STMLIBDIR)/CMSIS/Core/CM3
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
# use file-extension c for "c-only"-files
|
||||
|
||||
## PipBee:
|
||||
SRC = pipbee.c
|
||||
SRC += pios_board.c
|
||||
|
||||
## PIOS Hardware (STM32F10x)
|
||||
SRC += $(PIOSSTM32F10X)/pios_sys.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_led.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_delay.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_usart.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_irq.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_adc.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_gpio.c
|
||||
SRC += $(PIOSSTM32F10X)/pios_spi.c
|
||||
|
||||
## PIOS Hardware (Common)
|
||||
SRC += $(PIOSCOMMON)/pios_com.c
|
||||
SRC += $(PIOSCOMMON)/printf-stdarg.c
|
||||
|
||||
## CMSIS for STM32
|
||||
SRC += $(CMSISDIR)/core_cm3.c
|
||||
SRC += $(CMSISDIR)/system_stm32f10x.c
|
||||
|
||||
## Used parts of the STM-Library
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_adc.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_bkp.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_crc.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_dac.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_dma.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_exti.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_flash.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_gpio.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_pwr.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_rcc.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_rtc.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_spi.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_tim.c
|
||||
SRC += $(STMSPDSRCDIR)/stm32f10x_usart.c
|
||||
SRC += $(STMSPDSRCDIR)/misc.c
|
||||
|
||||
# List C source files here which must be compiled in ARM-Mode (no -mthumb).
|
||||
# use file-extension c for "c-only"-files
|
||||
## just for testing, timer.c could be compiled in thumb-mode too
|
||||
SRCARM =
|
||||
|
||||
# List C++ source files here.
|
||||
# use file-extension .cpp for C++-files (not .C)
|
||||
CPPSRC =
|
||||
|
||||
# List C++ source files here which must be compiled in ARM-Mode.
|
||||
# use file-extension .cpp for C++-files (not .C)
|
||||
#CPPSRCARM = $(TARGET).cpp
|
||||
CPPSRCARM =
|
||||
|
||||
# List Assembler source files here.
|
||||
# Make them always end in a capital .S. Files ending in a lowercase .s
|
||||
# will not be considered source files but generated files (assembler
|
||||
# output from the compiler), and will be deleted upon "make clean"!
|
||||
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
||||
# it will preserve the spelling of the filenames, and gcc itself does
|
||||
# care about how the name is spelled on its command-line.
|
||||
ASRC = $(PIOSSTM32F10X)/startup_stm32f10x_$(MODEL).S
|
||||
|
||||
# List Assembler source files here which must be assembled in ARM-Mode..
|
||||
ASRCARM =
|
||||
|
||||
# List any extra directories to look for include files here.
|
||||
# Each directory must be seperated by a space.
|
||||
EXTRAINCDIRS += $(PIOS)
|
||||
EXTRAINCDIRS += $(PIOSINC)
|
||||
EXTRAINCDIRS += $(FLIGHTLIBINC)
|
||||
EXTRAINCDIRS += $(PIOSSTM32F10X)
|
||||
EXTRAINCDIRS += $(PIOSCOMMON)
|
||||
EXTRAINCDIRS += $(STMSPDINCDIR)
|
||||
EXTRAINCDIRS += $(CMSISDIR)
|
||||
EXTRAINCDIRS += $(PIPBEEINC)
|
||||
|
||||
# List any extra directories to look for library files here.
|
||||
# Also add directories where the linker should search for
|
||||
# includes from linker-script to the list
|
||||
# Each directory must be seperated by a space.
|
||||
EXTRA_LIBDIRS =
|
||||
|
||||
# Extra Libraries
|
||||
# Each library-name must be seperated by a space.
|
||||
# i.e. to link with libxyz.a, libabc.a and libefsl.a:
|
||||
# EXTRA_LIBS = xyz abc efsl
|
||||
# for newlib-lpc (file: libnewlibc-lpc.a):
|
||||
# EXTRA_LIBS = newlib-lpc
|
||||
EXTRA_LIBS =
|
||||
|
||||
# Path to Linker-Scripts
|
||||
LINKERSCRIPTPATH = $(PIOSSTM32F10X)
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
|
||||
ifeq ($(DEBUG),YES)
|
||||
OPT = 0
|
||||
else
|
||||
OPT = s
|
||||
endif
|
||||
|
||||
# Output format. (can be ihex or binary or both)
|
||||
# binary to create a load-image in raw-binary format i.e. for SAM-BA,
|
||||
# ihex to create a load-image in Intel hex format
|
||||
#LOADFORMAT = ihex
|
||||
#LOADFORMAT = binary
|
||||
LOADFORMAT = both
|
||||
|
||||
# Debugging format.
|
||||
DEBUGF = dwarf-2
|
||||
|
||||
# Place project-specific -D (define) and/or
|
||||
# -U options for C here.
|
||||
CDEFS = -DSTM32F10X_$(MODEL)
|
||||
CDEFS += -DUSE_STDPERIPH_DRIVER
|
||||
CDEFS += -DUSE_$(BOARD)
|
||||
|
||||
# Place project-specific -D and/or -U options for
|
||||
# Assembler with preprocessor here.
|
||||
#ADEFS = -DUSE_IRQ_ASM_WRAPPER
|
||||
ADEFS = -D__ASSEMBLY__
|
||||
|
||||
# Compiler flag to set the C Standard level.
|
||||
# c89 - "ANSI" C
|
||||
# gnu89 - c89 plus GCC extensions
|
||||
# c99 - ISO C99 standard (not yet fully implemented)
|
||||
# gnu99 - c99 plus GCC extensions
|
||||
CSTANDARD = -std=gnu99
|
||||
|
||||
#-----
|
||||
|
||||
# Compiler flags.
|
||||
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
#
|
||||
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
|
||||
|
||||
ifeq ($(DEBUG),YES)
|
||||
CFLAGS = -g$(DEBUGF)
|
||||
endif
|
||||
|
||||
CFLAGS += -O$(OPT)
|
||||
CFLAGS += -mcpu=$(MCU) -mthumb
|
||||
CFLAGS += $(CDEFS)
|
||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.
|
||||
|
||||
CFLAGS += -mapcs-frame
|
||||
CFLAGS += -fomit-frame-pointer
|
||||
ifeq ($(CODE_SOURCERY), YES)
|
||||
CFLAGS += -fpromote-loop-indices
|
||||
endif
|
||||
|
||||
CFLAGS += -Wall
|
||||
CFLAGS += -Werror
|
||||
CFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
|
||||
# Compiler flags to generate dependency files:
|
||||
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d
|
||||
|
||||
# flags only for C
|
||||
#CONLYFLAGS += -Wnested-externs
|
||||
CONLYFLAGS += $(CSTANDARD)
|
||||
|
||||
# Assembler flags.
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -ahlns: create listing
|
||||
ASFLAGS = -mcpu=$(MCU) -mthumb -I. -x assembler-with-cpp
|
||||
ASFLAGS += $(ADEFS)
|
||||
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
|
||||
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
|
||||
MATH_LIB = -lm
|
||||
|
||||
# Linker flags.
|
||||
# -Wl,...: tell GCC to pass this to linker.
|
||||
# -Map: create map file
|
||||
# --cref: add cross reference to map file
|
||||
LDFLAGS = -nostartfiles -Wl,-Map=$(OUTDIR)/$(TARGET).map,--cref,--gc-sections
|
||||
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
|
||||
LDFLAGS += -lc
|
||||
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
|
||||
LDFLAGS += $(MATH_LIB)
|
||||
LDFLAGS += -lc -lgcc
|
||||
|
||||
# Set linker-script name depending on selected submodel name
|
||||
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld
|
||||
|
||||
# ---------------------------------------------------------------------------
|
||||
# Options for OpenOCD flash-programming
|
||||
# see openocd.pdf/openocd.texi for further information
|
||||
#
|
||||
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
|
||||
# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd
|
||||
OOCD_EXE=openocd
|
||||
# debug level
|
||||
OOCD_CL=-d0
|
||||
# interface and board/target settings (using the OOCD target-library here)
|
||||
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.ahrs.cfg -f ../Project/OpenOCD/stm32.cfg
|
||||
# initialize
|
||||
OOCD_CL+=-c init
|
||||
# show the targets
|
||||
OOCD_CL+=-c targets
|
||||
# commands to prepare flash-write
|
||||
OOCD_CL+= -c "reset halt"
|
||||
# flash erase
|
||||
OOCD_CL+=-c "stm32x mass_erase 0"
|
||||
# flash-write
|
||||
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
|
||||
# Verify
|
||||
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
|
||||
# reset target
|
||||
OOCD_CL+=-c "reset run"
|
||||
# terminate OOCD after programming
|
||||
OOCD_CL+=-c shutdown
|
||||
# ---------------------------------------------------------------------------
|
||||
|
||||
|
||||
# Define programs and commands.
|
||||
CC = $(TCHAIN_PREFIX)gcc
|
||||
CPP = $(TCHAIN_PREFIX)g++
|
||||
AR = $(TCHAIN_PREFIX)ar
|
||||
OBJCOPY = $(TCHAIN_PREFIX)objcopy
|
||||
OBJDUMP = $(TCHAIN_PREFIX)objdump
|
||||
SIZE = $(TCHAIN_PREFIX)size
|
||||
NM = $(TCHAIN_PREFIX)nm
|
||||
REMOVE = $(REMOVE_CMD) -f
|
||||
###SHELL = sh
|
||||
###COPY = cp
|
||||
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_BEGIN = "-------- begin (mode: $(RUN_MODE)) --------"
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after build:
|
||||
MSG_LOAD_FILE = Creating load file:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing/Disassembly:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = "**** Linking :"
|
||||
MSG_COMPILING = "**** Compiling C :"
|
||||
MSG_COMPILING_ARM = "**** Compiling C (ARM-only):"
|
||||
MSG_COMPILINGCPP = "Compiling C++ :"
|
||||
MSG_COMPILINGCPP_ARM = "Compiling C++ (ARM-only):"
|
||||
MSG_ASSEMBLING = "**** Assembling:"
|
||||
MSG_ASSEMBLING_ARM = "****Assembling (ARM-only):"
|
||||
MSG_CLEANING = Cleaning project:
|
||||
MSG_FORMATERROR = Can not handle output-format
|
||||
MSG_ASMFROMC = "Creating asm-File from C-Source:"
|
||||
MSG_ASMFROMC_ARM = "Creating asm-File from C-Source (ARM-only):"
|
||||
|
||||
# List of all source files.
|
||||
ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
|
||||
# List of all source files without directory and file-extension.
|
||||
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))
|
||||
|
||||
# Define all object files.
|
||||
ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))
|
||||
|
||||
# Define all listing files (used for make clean).
|
||||
LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
|
||||
# Define all depedency-files (used for make clean).
|
||||
DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))
|
||||
|
||||
elf: $(OUTDIR)/$(TARGET).elf
|
||||
lss: $(OUTDIR)/$(TARGET).lss
|
||||
sym: $(OUTDIR)/$(TARGET).sym
|
||||
hex: $(OUTDIR)/$(TARGET).hex
|
||||
bin: $(OUTDIR)/$(TARGET).bin
|
||||
|
||||
# Default target.
|
||||
#all: begin gccversion sizebefore build sizeafter finished end
|
||||
all: begin gccversion build sizeafter finished end
|
||||
|
||||
ifeq ($(LOADFORMAT),ihex)
|
||||
build: elf hex lss sym
|
||||
else
|
||||
ifeq ($(LOADFORMAT),binary)
|
||||
build: elf bin lss sym
|
||||
else
|
||||
ifeq ($(LOADFORMAT),both)
|
||||
build: elf hex bin lss sym
|
||||
else
|
||||
$(error "$(MSG_FORMATERROR) $(FORMAT)")
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
|
||||
# Eye candy.
|
||||
begin:
|
||||
## @echo
|
||||
@echo $(MSG_BEGIN)
|
||||
|
||||
finished:
|
||||
## @echo $(MSG_ERRORS_NONE)
|
||||
|
||||
end:
|
||||
@echo $(MSG_END)
|
||||
## @echo
|
||||
|
||||
# Display sizes of sections.
|
||||
ELFSIZE = $(SIZE) -A $(OUTDIR)/$(TARGET).elf
|
||||
##ELFSIZE = $(SIZE) --format=Berkeley --common $(OUTDIR)/$(TARGET).elf
|
||||
sizebefore:
|
||||
# @if [ -f $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
|
||||
|
||||
sizeafter:
|
||||
# @if [ -f $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
||||
@echo $(MSG_SIZE_AFTER)
|
||||
$(ELFSIZE)
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion :
|
||||
@$(CC) --version
|
||||
# @echo $(ALLOBJ)
|
||||
|
||||
# Program the device.
|
||||
ifeq ($(FLASH_TOOL),OPENOCD)
|
||||
# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script".
|
||||
program: $(OUTDIR)/$(TARGET).elf
|
||||
@echo "Programming with OPENOCD"
|
||||
$(OOCD_EXE) $(OOCD_CL)
|
||||
endif
|
||||
|
||||
# Create final output file (.hex) from ELF output file.
|
||||
%.hex: %.elf
|
||||
## @echo
|
||||
@echo $(MSG_LOAD_FILE) $@
|
||||
$(OBJCOPY) -O ihex $< $@
|
||||
|
||||
# Create final output file (.bin) from ELF output file.
|
||||
%.bin: %.elf
|
||||
## @echo
|
||||
@echo $(MSG_LOAD_FILE) $@
|
||||
$(OBJCOPY) -O binary $< $@
|
||||
|
||||
# Create extended listing file/disassambly from ELF output file.
|
||||
# using objdump testing: option -C
|
||||
%.lss: %.elf
|
||||
## @echo
|
||||
@echo $(MSG_EXTENDED_LISTING) $@
|
||||
$(OBJDUMP) -h -S -C -r $< > $@
|
||||
# $(OBJDUMP) -x -S $< > $@
|
||||
|
||||
# Create a symbol table from ELF output file.
|
||||
%.sym: %.elf
|
||||
## @echo
|
||||
@echo $(MSG_SYMBOL_TABLE) $@
|
||||
$(NM) -n $< > $@
|
||||
|
||||
# Link: create ELF output file from object files.
|
||||
.SECONDARY : $(TARGET).elf
|
||||
.PRECIOUS : $(ALLOBJ)
|
||||
%.elf: $(ALLOBJ)
|
||||
@echo
|
||||
@echo $(MSG_LINKING) $@
|
||||
# use $(CC) for C-only projects or $(CPP) for C++-projects:
|
||||
$(CC) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)
|
||||
# $(CPP) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)
|
||||
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
define ASSEMBLE_TEMPLATE
|
||||
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
|
||||
## @echo
|
||||
@echo $(MSG_ASSEMBLING) $$< "->" $$@
|
||||
$(CC) -c $(THUMB) $$(ASFLAGS) $$< -o $$@
|
||||
endef
|
||||
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src))))
|
||||
|
||||
# Assemble: create object files from assembler source files. ARM-only
|
||||
define ASSEMBLE_ARM_TEMPLATE
|
||||
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
|
||||
## @echo
|
||||
@echo $(MSG_ASSEMBLING_ARM) $$< "->" $$@
|
||||
$(CC) -c $$(ASFLAGS) $$< -o $$@
|
||||
endef
|
||||
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src))))
|
||||
|
||||
|
||||
# Compile: create object files from C source files.
|
||||
define COMPILE_C_TEMPLATE
|
||||
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
|
||||
## @echo
|
||||
@echo $(MSG_COMPILING) $$< "->" $$@
|
||||
$(CC) -c $(THUMB) $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@
|
||||
endef
|
||||
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src))))
|
||||
|
||||
# Compile: create object files from C source files. ARM-only
|
||||
define COMPILE_C_ARM_TEMPLATE
|
||||
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
|
||||
## @echo
|
||||
@echo $(MSG_COMPILING_ARM) $$< "->" $$@
|
||||
$(CC) -c $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@
|
||||
endef
|
||||
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src))))
|
||||
|
||||
|
||||
# Compile: create object files from C++ source files.
|
||||
define COMPILE_CPP_TEMPLATE
|
||||
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
|
||||
## @echo
|
||||
@echo $(MSG_COMPILINGCPP) $$< "->" $$@
|
||||
$(CC) -c $(THUMB) $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@
|
||||
endef
|
||||
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src))))
|
||||
|
||||
# Compile: create object files from C++ source files. ARM-only
|
||||
define COMPILE_CPP_ARM_TEMPLATE
|
||||
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
|
||||
## @echo
|
||||
@echo $(MSG_COMPILINGCPP_ARM) $$< "->" $$@
|
||||
$(CC) -c $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@
|
||||
endef
|
||||
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src))))
|
||||
|
||||
|
||||
# Compile: create assembler files from C source files. ARM/Thumb
|
||||
$(SRC:.c=.s) : %.s : %.c
|
||||
@echo $(MSG_ASMFROMC) $< to $@
|
||||
$(CC) $(THUMB) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@
|
||||
|
||||
# Compile: create assembler files from C source files. ARM only
|
||||
$(SRCARM:.c=.s) : %.s : %.c
|
||||
@echo $(MSG_ASMFROMC_ARM) $< to $@
|
||||
$(CC) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@
|
||||
|
||||
# Generate Doxygen documents
|
||||
docs:
|
||||
doxygen $(DOXYGENDIR)/doxygen.cfg
|
||||
|
||||
# Target: clean project.
|
||||
clean: begin clean_list finished end
|
||||
|
||||
clean_list :
|
||||
## @echo
|
||||
@echo $(MSG_CLEANING)
|
||||
$(REMOVE) $(OUTDIR)/$(TARGET).map
|
||||
$(REMOVE) $(OUTDIR)/$(TARGET).elf
|
||||
$(REMOVE) $(OUTDIR)/$(TARGET).hex
|
||||
$(REMOVE) $(OUTDIR)/$(TARGET).bin
|
||||
$(REMOVE) $(OUTDIR)/$(TARGET).sym
|
||||
$(REMOVE) $(OUTDIR)/$(TARGET).lss
|
||||
$(REMOVE) $(ALLOBJ)
|
||||
$(REMOVE) $(LSTFILES)
|
||||
$(REMOVE) $(DEPFILES)
|
||||
$(REMOVE) $(SRC:.c=.s)
|
||||
$(REMOVE) $(SRCARM:.c=.s)
|
||||
$(REMOVE) $(CPPSRC:.cpp=.s)
|
||||
$(REMOVE) $(CPPSRCARM:.cpp=.s)
|
||||
|
||||
|
||||
# Create output files directory
|
||||
# all known MS Windows OS define the ComSpec environment variable
|
||||
ifdef ComSpec
|
||||
$(shell md $(OUTDIR) 2>NUL)
|
||||
else
|
||||
$(shell mkdir $(OUTDIR) 2>/dev/null)
|
||||
endif
|
||||
|
||||
# Include the dependency files.
|
||||
ifdef ComSpec
|
||||
-include $(shell md $(OUTDIR)\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
|
||||
else
|
||||
-include $(shell mkdir $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
|
||||
endif
|
||||
|
||||
|
||||
|
||||
# Listing of phony targets.
|
||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex bin lss sym clean clean_list program
|
||||
|
||||
255
flight/PipXtreme/inc/pios_board.h
Normal file
255
flight/PipXtreme/inc/pios_board.h
Normal file
@ -0,0 +1,255 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
*
|
||||
* @file pios_board.h
|
||||
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
||||
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
|
||||
* @see The GNU Public License (GPL) Version 3
|
||||
*
|
||||
*****************************************************************************/
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#ifndef PIOS_BOARD_H
|
||||
#define PIOS_BOARD_H
|
||||
|
||||
|
||||
//------------------------
|
||||
// Timers and Channels Used
|
||||
//------------------------
|
||||
/*
|
||||
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
|
||||
------+-----------+-----------+-----------+----------
|
||||
TIM1 | | | |
|
||||
TIM2 | --------------- PIOS_DELAY -----------------
|
||||
TIM3 | | | |
|
||||
TIM4 | | | |
|
||||
TIM5 | | | |
|
||||
TIM6 | | | |
|
||||
TIM7 | | | |
|
||||
TIM8 | | | |
|
||||
------+-----------+-----------+-----------+----------
|
||||
*/
|
||||
|
||||
//------------------------
|
||||
// DMA Channels Used
|
||||
//------------------------
|
||||
/* Channel 1 - */
|
||||
/* Channel 2 - */
|
||||
/* Channel 3 - */
|
||||
/* Channel 4 - */
|
||||
/* Channel 5 - */
|
||||
/* Channel 6 - */
|
||||
/* Channel 7 - */
|
||||
/* Channel 8 - */
|
||||
/* Channel 9 - */
|
||||
/* Channel 10 - */
|
||||
/* Channel 11 - */
|
||||
/* Channel 12 - */
|
||||
|
||||
//------------------------
|
||||
// PIOS_LED
|
||||
//------------------------
|
||||
#define PIOS_LED_LED1_GPIO_PORT GPIOA // USB Activity LED
|
||||
#define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_3
|
||||
#define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOA
|
||||
|
||||
#define PIOS_LED_LED2_GPIO_PORT GPIOB // LINK LED
|
||||
#define PIOS_LED_LED2_GPIO_PIN GPIO_Pin_5
|
||||
#define PIOS_LED_LED2_GPIO_CLK RCC_APB2Periph_GPIOB
|
||||
|
||||
#define PIOS_LED_LED3_GPIO_PORT GPIOB // RX LED
|
||||
#define PIOS_LED_LED3_GPIO_PIN GPIO_Pin_6
|
||||
#define PIOS_LED_LED3_GPIO_CLK RCC_APB2Periph_GPIOB
|
||||
|
||||
#define PIOS_LED_LED4_GPIO_PORT GPIOB // TX LED
|
||||
#define PIOS_LED_LED4_GPIO_PIN GPIO_Pin_7
|
||||
#define PIOS_LED_LED4_GPIO_CLK RCC_APB2Periph_GPIOB
|
||||
|
||||
#define PIOS_LED_NUM 4
|
||||
#define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT, PIOS_LED_LED2_GPIO_PORT, PIOS_LED_LED3_GPIO_PORT, PIOS_LED_LED4_GPIO_PORT }
|
||||
#define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN, PIOS_LED_LED2_GPIO_PIN, PIOS_LED_LED3_GPIO_PIN, PIOS_LED_LED4_GPIO_PIN }
|
||||
#define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK, PIOS_LED_LED2_GPIO_CLK, PIOS_LED_LED3_GPIO_CLK, PIOS_LED_LED4_GPIO_CLK }
|
||||
|
||||
#define USB_LED_ON PIOS_LED_On(LED1)
|
||||
#define USB_LED_OFF PIOS_LED_Off(LED1)
|
||||
#define USB_LED_TOGGLE PIOS_LED_Toggle(LED1)
|
||||
#define LINK_LED_ON PIOS_LED_On(LED2)
|
||||
#define LINK_LED_OFF PIOS_LED_Off(LED2)
|
||||
#define LINK_LED_TOGGLE PIOS_LED_Toggle(LED2)
|
||||
#define RX_LED_ON PIOS_LED_On(LED3)
|
||||
#define RX_LED_OFF PIOS_LED_Off(LED3)
|
||||
#define RX_LED_TOGGLE PIOS_LED_Toggle(LED3)
|
||||
#define TX_LED_ON PIOS_LED_On(LED4)
|
||||
#define TX_LED_OFF PIOS_LED_Off(LED4)
|
||||
#define TX_LED_TOGGLE PIOS_LED_Toggle(LED4)
|
||||
|
||||
//-------------------------
|
||||
// Delay Timer
|
||||
//-------------------------
|
||||
#define PIOS_DELAY_TIMER TIM2
|
||||
#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE)
|
||||
|
||||
//-------------------------
|
||||
// System Settings
|
||||
//-------------------------
|
||||
#define PIOS_MASTER_CLOCK 72000000
|
||||
#define PIOS_PERIPHERAL_CLOCK (PIOS_MASTER_CLOCK / 2)
|
||||
#if defined(USE_BOOTLOADER)
|
||||
#define PIOS_NVIC_VECTTAB_FLASH ((uint32_t)0x08006000)
|
||||
#else
|
||||
#define PIOS_NVIC_VECTTAB_FLASH ((uint32_t)0x08000000)
|
||||
#endif
|
||||
|
||||
//-------------------------
|
||||
// Interrupt Priorities
|
||||
//-------------------------
|
||||
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
|
||||
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
|
||||
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
|
||||
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
|
||||
|
||||
//-------------------------
|
||||
// SPI
|
||||
//
|
||||
// See also pios_board.c
|
||||
//-------------------------
|
||||
#define PIOS_SPI_PERIF 0
|
||||
|
||||
//-------------------------
|
||||
// PIOS_USART
|
||||
//-------------------------
|
||||
|
||||
#define PIOS_USART_RX_BUFFER_SIZE 512
|
||||
#define PIOS_USART_TX_BUFFER_SIZE 256
|
||||
|
||||
#define PIOS_COM_SERIAL 0
|
||||
|
||||
#define PIOS_COM_DEBUG PIOS_COM_SERIAL
|
||||
|
||||
//-------------------------
|
||||
|
||||
#if 0
|
||||
//-------------------------
|
||||
// ADC
|
||||
// PIOS_ADC_PinGet(0) = Accel Z
|
||||
// PIOS_ADC_PinGet(1) =
|
||||
// PIOS_ADC_PinGet(2) =
|
||||
// PIOS_ADC_PinGet(3) =
|
||||
// PIOS_ADC_PinGet(4) = Accel ?
|
||||
// PIOS_ADC_PinGet(5) =
|
||||
// PIOS_ADC_PinGet(6) =
|
||||
// PIOS_ADC_PinGet(7) =
|
||||
//-------------------------
|
||||
//#define PIOS_ADC_OVERSAMPLING_RATE 1
|
||||
#define PIOS_ADC_USE_TEMP_SENSOR 0
|
||||
#define PIOS_ADC_TEMP_SENSOR_ADC ADC1
|
||||
#define PIOS_ADC_TEMP_SENSOR_ADC_CHANNEL 1
|
||||
|
||||
#define PIOS_ADC_PIN1_GPIO_PORT GPIOB // PB1 (PSU Voltage)
|
||||
#define PIOS_ADC_PIN1_GPIO_PIN GPIO_Pin_1 // ADC12_IN9
|
||||
#define PIOS_ADC_PIN1_GPIO_CHANNEL ADC_Channel_9
|
||||
#define PIOS_ADC_PIN1_ADC ADC2
|
||||
#define PIOS_ADC_PIN1_ADC_NUMBER 4
|
||||
|
||||
#define PIOS_ADC_NUM_PINS 1
|
||||
|
||||
#define PIOS_ADC_PORTS { PIOS_ADC_PIN1_GPIO_PORT }
|
||||
#define PIOS_ADC_PINS { PIOS_ADC_PIN1_GPIO_PIN }
|
||||
#define PIOS_ADC_CHANNELS { PIOS_ADC_PIN1_GPIO_CHANNEL }
|
||||
#define PIOS_ADC_MAPPING { PIOS_ADC_PIN1_ADC }
|
||||
#define PIOS_ADC_CHANNEL_MAPPING { PIOS_ADC_PIN1_ADC_NUMBER }
|
||||
#define PIOS_ADC_NUM_CHANNELS (PIOS_ADC_NUM_PINS + PIOS_ADC_USE_TEMP_SENSOR)
|
||||
#define PIOS_ADC_NUM_ADC_CHANNELS 2
|
||||
#define PIOS_ADC_USE_ADC2 1
|
||||
#define PIOS_ADC_CLOCK_FUNCTION RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE)
|
||||
#define PIOS_ADC_ADCCLK RCC_PCLK2_Div8
|
||||
/* RCC_PCLK2_Div2: ADC clock = PCLK2/2 */
|
||||
/* RCC_PCLK2_Div4: ADC clock = PCLK2/4 */
|
||||
/* RCC_PCLK2_Div6: ADC clock = PCLK2/6 */
|
||||
/* RCC_PCLK2_Div8: ADC clock = PCLK2/8 */
|
||||
#define PIOS_ADC_SAMPLE_TIME ADC_SampleTime_239Cycles5
|
||||
/* Sample time: */
|
||||
/* With an ADCCLK = 14 MHz and a sampling time of 293.5 cycles: */
|
||||
/* Tconv = 239.5 + 12.5 = 252 cycles = 18<31>s */
|
||||
/* (1 / (ADCCLK / CYCLES)) = Sample Time (<28>S) */
|
||||
#define PIOS_ADC_IRQ_PRIO PIOS_IRQ_PRIO_HIGH
|
||||
#endif
|
||||
|
||||
//-------------------------
|
||||
// ADC
|
||||
// PIOS_ADC_PinGet(0) = Accel Z
|
||||
// PIOS_ADC_PinGet(1) =
|
||||
// PIOS_ADC_PinGet(2) =
|
||||
// PIOS_ADC_PinGet(3) =
|
||||
// PIOS_ADC_PinGet(4) = Accel ?
|
||||
// PIOS_ADC_PinGet(5) =
|
||||
// PIOS_ADC_PinGet(6) =
|
||||
// PIOS_ADC_PinGet(7) =
|
||||
//-------------------------
|
||||
//#define PIOS_ADC_OVERSAMPLING_RATE 1
|
||||
#define PIOS_ADC_USE_TEMP_SENSOR 0
|
||||
#define PIOS_ADC_TEMP_SENSOR_ADC ADC1
|
||||
#define PIOS_ADC_TEMP_SENSOR_ADC_CHANNEL 1
|
||||
|
||||
#define PIOS_ADC_PIN1_GPIO_PORT GPIOB // PB1 (PSU Voltage)
|
||||
#define PIOS_ADC_PIN1_GPIO_PIN GPIO_Pin_1 // ADC12_IN9
|
||||
#define PIOS_ADC_PIN1_GPIO_CHANNEL ADC_Channel_9
|
||||
#define PIOS_ADC_PIN1_ADC ADC2
|
||||
#define PIOS_ADC_PIN1_ADC_NUMBER 4
|
||||
|
||||
#define PIOS_ADC_NUM_PINS 1
|
||||
|
||||
#define PIOS_ADC_PORTS { PIOS_ADC_PIN1_GPIO_PORT }
|
||||
#define PIOS_ADC_PINS { PIOS_ADC_PIN1_GPIO_PIN }
|
||||
#define PIOS_ADC_CHANNELS { PIOS_ADC_PIN1_GPIO_CHANNEL }
|
||||
#define PIOS_ADC_MAPPING { PIOS_ADC_PIN1_ADC }
|
||||
#define PIOS_ADC_CHANNEL_MAPPING { PIOS_ADC_PIN1_ADC_NUMBER }
|
||||
#define PIOS_ADC_NUM_CHANNELS (PIOS_ADC_NUM_PINS + PIOS_ADC_USE_TEMP_SENSOR)
|
||||
#define PIOS_ADC_NUM_ADC_CHANNELS 2
|
||||
#define PIOS_ADC_USE_ADC2 1
|
||||
#define PIOS_ADC_CLOCK_FUNCTION RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE)
|
||||
#define PIOS_ADC_ADCCLK RCC_PCLK2_Div8
|
||||
/* RCC_PCLK2_Div2: ADC clock = PCLK2/2 */
|
||||
/* RCC_PCLK2_Div4: ADC clock = PCLK2/4 */
|
||||
/* RCC_PCLK2_Div6: ADC clock = PCLK2/6 */
|
||||
/* RCC_PCLK2_Div8: ADC clock = PCLK2/8 */
|
||||
#define PIOS_ADC_SAMPLE_TIME ADC_SampleTime_239Cycles5
|
||||
/* Sample time: */
|
||||
/* With an ADCCLK = 14 MHz and a sampling time of 293.5 cycles: */
|
||||
/* Tconv = 239.5 + 12.5 = 252 cycles = 18<31>s */
|
||||
/* (1 / (ADCCLK / CYCLES)) = Sample Time (<28>S) */
|
||||
#define PIOS_ADC_IRQ_PRIO PIOS_IRQ_PRIO_HIGH
|
||||
|
||||
//-------------------------
|
||||
// GPIO
|
||||
//-------------------------
|
||||
|
||||
#define PIOS_GPIO_1_PORT GPIOB
|
||||
#define PIOS_GPIO_1_PIN GPIO_Pin_15
|
||||
#define PIOS_GPIO_1_GPIO_CLK RCC_APB2Periph_GPIOB
|
||||
#define PIOS_GPIO_PORTS { PIOS_GPIO_1_PORT }
|
||||
#define PIOS_GPIO_PINS { PIOS_GPIO_1_PIN }
|
||||
#define PIOS_GPIO_CLKS { PIOS_GPIO_1_GPIO_CLK }
|
||||
#define PIOS_GPIO_NUM 1
|
||||
|
||||
#define SET_RTS PIOS_GPIO_On(0);
|
||||
#define CLEAR_RTS PIOS_GPIO_Off(0);
|
||||
|
||||
//-------------------------
|
||||
|
||||
#endif /* PIOS_BOARD_H */
|
||||
43
flight/PipXtreme/inc/pios_config.h
Normal file
43
flight/PipXtreme/inc/pios_config.h
Normal file
@ -0,0 +1,43 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
*
|
||||
* @file pios_config.h
|
||||
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
||||
* @brief PiOS configuration header.
|
||||
* - Central compile time config for the project.
|
||||
* @see The GNU Public License (GPL) Version 3
|
||||
*
|
||||
*****************************************************************************/
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#ifndef PIOS_CONFIG_H
|
||||
#define PIOS_CONFIG_H
|
||||
|
||||
/* Enable/Disable PiOS Modules */
|
||||
#define PIOS_INCLUDE_ADC
|
||||
#define PIOS_INCLUDE_DELAY
|
||||
#define PIOS_INCLUDE_IRQ
|
||||
#define PIOS_INCLUDE_LED
|
||||
#define PIOS_INCLUDE_SPI
|
||||
#define PIOS_INCLUDE_SYS
|
||||
#define PIOS_INCLUDE_USART
|
||||
#define PIOS_INCLUDE_COM
|
||||
#define PIOS_INCLUDE_GPIO
|
||||
|
||||
|
||||
#endif /* PIOS_CONFIG_H */
|
||||
34
flight/PipXtreme/inc/pipbee.h
Normal file
34
flight/PipXtreme/inc/pipbee.h
Normal file
@ -0,0 +1,34 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
*
|
||||
* @file pipbee.h
|
||||
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
||||
* @brief Main PipBee header.
|
||||
* @see The GNU Public License (GPL) Version 3
|
||||
*
|
||||
*****************************************************************************/
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#ifndef PIPBEE_H
|
||||
#define PIPBEE_H
|
||||
|
||||
|
||||
/* PIOS Includes */
|
||||
#include <pios.h>
|
||||
|
||||
#endif /* PIPBEE_H */
|
||||
262
flight/PipXtreme/pios_board.c
Normal file
262
flight/PipXtreme/pios_board.c
Normal file
@ -0,0 +1,262 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
*
|
||||
* @file pios_board.c
|
||||
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
||||
* @brief Defines board specific static initializers for hardware for the PipBee board.
|
||||
* @see The GNU Public License (GPL) Version 3
|
||||
*
|
||||
*****************************************************************************/
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <pios.h>
|
||||
|
||||
#if defined(PIOS_INCLUDE_SPI)
|
||||
|
||||
#include <pios_spi_priv.h>
|
||||
|
||||
/* OP Interface
|
||||
*
|
||||
* NOTE: Leave this declared as const data so that it ends up in the
|
||||
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
|
||||
*/
|
||||
void PIOS_SPI_perif_irq_handler(void);
|
||||
void DMA1_Channel5_IRQHandler() __attribute__ ((alias ("PIOS_SPI_perif_irq_handler")));
|
||||
void DMA1_Channel4_IRQHandler() __attribute__ ((alias ("PIOS_SPI_perif_irq_handler")));
|
||||
static const struct pios_spi_cfg pios_spi_perif_cfg =
|
||||
{
|
||||
.regs = SPI1,
|
||||
.init =
|
||||
{
|
||||
.SPI_Mode = SPI_Mode_Master,
|
||||
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
|
||||
.SPI_DataSize = SPI_DataSize_8b,
|
||||
.SPI_NSS = SPI_NSS_Soft,
|
||||
.SPI_FirstBit = SPI_FirstBit_MSB,
|
||||
.SPI_CRCPolynomial = 7,
|
||||
.SPI_CPOL = SPI_CPOL_High,
|
||||
.SPI_CPHA = SPI_CPHA_2Edge,
|
||||
.SPI_BaudRatePrescaler = 7 << 3, /* Maximum divider (ie. slowest clock rate) */
|
||||
},
|
||||
.dma =
|
||||
{
|
||||
.ahb_clk = RCC_AHBPeriph_DMA1,
|
||||
.irq =
|
||||
{
|
||||
.handler = PIOS_SPI_perif_irq_handler,
|
||||
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
|
||||
.init =
|
||||
{
|
||||
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
|
||||
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
||||
.NVIC_IRQChannelSubPriority = 0,
|
||||
.NVIC_IRQChannelCmd = ENABLE,
|
||||
},
|
||||
},
|
||||
.rx =
|
||||
{
|
||||
.channel = DMA1_Channel4,
|
||||
.init =
|
||||
{
|
||||
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
|
||||
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
||||
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
||||
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
||||
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
||||
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
||||
.DMA_Mode = DMA_Mode_Normal,
|
||||
.DMA_Priority = DMA_Priority_Medium,
|
||||
.DMA_M2M = DMA_M2M_Disable,
|
||||
},
|
||||
},
|
||||
.tx =
|
||||
{
|
||||
.channel = DMA1_Channel5,
|
||||
.init =
|
||||
{
|
||||
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
|
||||
.DMA_DIR = DMA_DIR_PeripheralDST,
|
||||
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
||||
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
||||
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
||||
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
||||
.DMA_Mode = DMA_Mode_Normal,
|
||||
.DMA_Priority = DMA_Priority_Medium,
|
||||
.DMA_M2M = DMA_M2M_Disable,
|
||||
},
|
||||
},
|
||||
},
|
||||
.ssel =
|
||||
{
|
||||
.gpio = GPIOA,
|
||||
.init =
|
||||
{
|
||||
.GPIO_Pin = GPIO_Pin_4,
|
||||
.GPIO_Speed = GPIO_Speed_10MHz,
|
||||
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
||||
},
|
||||
},
|
||||
.sclk =
|
||||
{
|
||||
.gpio = GPIOA,
|
||||
.init =
|
||||
{
|
||||
.GPIO_Pin = GPIO_Pin_5,
|
||||
.GPIO_Speed = GPIO_Speed_10MHz,
|
||||
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
||||
},
|
||||
},
|
||||
.miso =
|
||||
{
|
||||
.gpio = GPIOA,
|
||||
.init =
|
||||
{
|
||||
.GPIO_Pin = GPIO_Pin_6,
|
||||
.GPIO_Speed = GPIO_Speed_10MHz,
|
||||
.GPIO_Mode = GPIO_Mode_AF_PP,
|
||||
},
|
||||
},
|
||||
.mosi =
|
||||
{
|
||||
.gpio = GPIOA,
|
||||
.init =
|
||||
{
|
||||
.GPIO_Pin = GPIO_Pin_7,
|
||||
.GPIO_Speed = GPIO_Speed_10MHz,
|
||||
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* Board specific number of devices.
|
||||
*/
|
||||
struct pios_spi_dev pios_spi_devs[] =
|
||||
{
|
||||
{
|
||||
.cfg = &pios_spi_perif_cfg,
|
||||
},
|
||||
};
|
||||
|
||||
uint8_t pios_spi_num_devices = NELEMENTS(pios_spi_devs);
|
||||
|
||||
void PIOS_SPI_perif_irq_handler(void)
|
||||
{
|
||||
/* Call into the generic code to handle the IRQ for this specific device */
|
||||
PIOS_SPI_IRQ_Handler(PIOS_SPI_PERIF);
|
||||
}
|
||||
|
||||
#endif /* PIOS_INCLUDE_SPI */
|
||||
|
||||
#if defined(PIOS_INCLUDE_USART)
|
||||
#include <pios_usart_priv.h>
|
||||
|
||||
/*
|
||||
* SERIAL USART
|
||||
*/
|
||||
void PIOS_USART_serial_irq_handler(void);
|
||||
void USART1_IRQHandler() __attribute__ ((alias ("PIOS_USART_serial_irq_handler")));
|
||||
|
||||
const struct pios_usart_cfg pios_usart_serial_cfg =
|
||||
{
|
||||
.regs = USART1,
|
||||
.init =
|
||||
{
|
||||
.USART_BaudRate = 57600,
|
||||
.USART_WordLength = USART_WordLength_8b,
|
||||
.USART_Parity = USART_Parity_No,
|
||||
.USART_StopBits = USART_StopBits_1,
|
||||
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
||||
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
||||
},
|
||||
.irq =
|
||||
{
|
||||
.handler = PIOS_USART_serial_irq_handler,
|
||||
.init =
|
||||
{
|
||||
.NVIC_IRQChannel = USART1_IRQn,
|
||||
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
||||
.NVIC_IRQChannelSubPriority = 0,
|
||||
.NVIC_IRQChannelCmd = ENABLE,
|
||||
},
|
||||
},
|
||||
.rx =
|
||||
{
|
||||
.gpio = GPIOA,
|
||||
.init =
|
||||
{
|
||||
.GPIO_Pin = GPIO_Pin_10,
|
||||
.GPIO_Speed = GPIO_Speed_2MHz,
|
||||
.GPIO_Mode = GPIO_Mode_IPU,
|
||||
},
|
||||
},
|
||||
.tx =
|
||||
{
|
||||
.gpio = GPIOA,
|
||||
.init =
|
||||
{
|
||||
.GPIO_Pin = GPIO_Pin_9,
|
||||
.GPIO_Speed = GPIO_Speed_2MHz,
|
||||
.GPIO_Mode = GPIO_Mode_AF_PP,
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* Board specific number of devices.
|
||||
*/
|
||||
struct pios_usart_dev pios_usart_devs[] =
|
||||
{
|
||||
#define PIOS_USART_SERIAL 0
|
||||
{
|
||||
.cfg = &pios_usart_serial_cfg,
|
||||
},
|
||||
};
|
||||
|
||||
uint8_t pios_usart_num_devices = NELEMENTS(pios_usart_devs);
|
||||
|
||||
void PIOS_USART_serial_irq_handler(void)
|
||||
{
|
||||
PIOS_USART_IRQ_Handler(PIOS_USART_SERIAL);
|
||||
}
|
||||
|
||||
#endif /* PIOS_INCLUDE_USART */
|
||||
|
||||
#if defined(PIOS_INCLUDE_COM)
|
||||
#include <pios_com_priv.h>
|
||||
|
||||
/*
|
||||
* COM devices
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board specific number of devices.
|
||||
*/
|
||||
extern const struct pios_com_driver pios_usart_com_driver;
|
||||
|
||||
struct pios_com_dev pios_com_devs[] =
|
||||
{
|
||||
{
|
||||
.id = PIOS_USART_SERIAL,
|
||||
.driver = &pios_usart_com_driver,
|
||||
},
|
||||
};
|
||||
|
||||
const uint8_t pios_com_num_devices = NELEMENTS(pios_com_devs);
|
||||
|
||||
#endif /* PIOS_INCLUDE_COM */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user