mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2025-01-17 02:52:12 +01:00
Add a board info file for revo mini. However it was to remap the define MAINADAPTER for the HMC5883 driver which needs rewriting not to need this.
This commit is contained in:
James Cotton
parent
05e2e24bcb
commit
b9050809cc
270
flight/PiOS/Boards/STM32F4xx_RevoMini.h
Normal file
270
flight/PiOS/Boards/STM32F4xx_RevoMini.h
Normal file
@ -0,0 +1,270 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @addtogroup OpenPilotSystem OpenPilot System
|
||||
* @{
|
||||
* @addtogroup OpenPilotCore OpenPilot Core
|
||||
* @{
|
||||
* @file pios_board.h
|
||||
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
|
||||
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
|
||||
* @see The GNU Public License (GPL) Version 3
|
||||
*
|
||||
*****************************************************************************/
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#ifndef STM3210E_INS_H_
|
||||
#define STM3210E_INS_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
//------------------------
|
||||
// Timers and Channels Used
|
||||
//------------------------
|
||||
/*
|
||||
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
|
||||
------+-----------+-----------+-----------+----------
|
||||
TIM1 | | | |
|
||||
TIM2 | --------------- PIOS_DELAY -----------------
|
||||
TIM3 | | | |
|
||||
TIM4 | | | |
|
||||
TIM5 | | | |
|
||||
TIM6 | | | |
|
||||
TIM7 | | | |
|
||||
TIM8 | | | |
|
||||
------+-----------+-----------+-----------+----------
|
||||
*/
|
||||
|
||||
//------------------------
|
||||
// DMA Channels Used
|
||||
//------------------------
|
||||
/* Channel 1 - */
|
||||
/* Channel 2 - SPI1 RX */
|
||||
/* Channel 3 - SPI1 TX */
|
||||
/* Channel 4 - SPI2 RX */
|
||||
/* Channel 5 - SPI2 TX */
|
||||
/* Channel 6 - */
|
||||
/* Channel 7 - */
|
||||
/* Channel 8 - */
|
||||
/* Channel 9 - */
|
||||
/* Channel 10 - */
|
||||
/* Channel 11 - */
|
||||
/* Channel 12 - */
|
||||
|
||||
//------------------------
|
||||
// BOOTLOADER_SETTINGS
|
||||
//------------------------
|
||||
#define BOARD_READABLE true
|
||||
#define BOARD_WRITABLE true
|
||||
#define MAX_DEL_RETRYS 3
|
||||
|
||||
|
||||
//------------------------
|
||||
// PIOS_LED
|
||||
//------------------------
|
||||
#define PIOS_LED_HEARTBEAT 0
|
||||
#define PIOS_LED_ALARM 1
|
||||
|
||||
//------------------------
|
||||
// PIOS_SPI
|
||||
// See also pios_board.c
|
||||
//------------------------
|
||||
#define PIOS_SPI_MAX_DEVS 3
|
||||
|
||||
//------------------------
|
||||
// PIOS_WDG
|
||||
//------------------------
|
||||
#define PIOS_WATCHDOG_TIMEOUT 250
|
||||
#define PIOS_WDG_REGISTER RTC_BKP_DR4
|
||||
#define PIOS_WDG_ACTUATOR 0x0001
|
||||
#define PIOS_WDG_STABILIZATION 0x0002
|
||||
#define PIOS_WDG_ATTITUDE 0x0004
|
||||
#define PIOS_WDG_MANUAL 0x0008
|
||||
#define PIOS_WDG_SENSORS 0x0010
|
||||
|
||||
//------------------------
|
||||
// PIOS_I2C
|
||||
// See also pios_board.c
|
||||
//------------------------
|
||||
#define PIOS_I2C_MAX_DEVS 3
|
||||
extern uint32_t pios_i2c_mag_pressure_adapter_id;
|
||||
#define PIOS_I2C_MAIN_ADAPTER (pios_i2c_mag_pressure_adapter_id)
|
||||
extern uint32_t pios_i2c_flexiport_adapter_id;
|
||||
#define PIOS_I2C_FLEXI_ADAPTER (pios_i2c_flexiport_adapter_id)
|
||||
#define PIOS_I2C_ETASV3_ADAPTER (PIOS_I2C_FLEXI_ADAPTER)
|
||||
|
||||
//-------------------------
|
||||
// PIOS_USART
|
||||
//
|
||||
// See also pios_board.c
|
||||
//-------------------------
|
||||
#define PIOS_USART_MAX_DEVS 5
|
||||
|
||||
//-------------------------
|
||||
// PIOS_COM
|
||||
//
|
||||
// See also pios_board.c
|
||||
//-------------------------
|
||||
#define PIOS_COM_MAX_DEVS 4
|
||||
extern uint32_t pios_com_telem_rf_id;
|
||||
extern uint32_t pios_com_gps_id;
|
||||
extern uint32_t pios_com_aux_id;
|
||||
extern uint32_t pios_com_telem_usb_id;
|
||||
extern uint32_t pios_com_bridge_id;
|
||||
extern uint32_t pios_com_vcp_id;
|
||||
#define PIOS_COM_AUX (pios_com_aux_id)
|
||||
#define PIOS_COM_GPS (pios_com_gps_id)
|
||||
#define PIOS_COM_TELEM_USB (pios_com_telem_usb_id)
|
||||
#define PIOS_COM_TELEM_RF (pios_com_telem_rf_id)
|
||||
#define PIOS_COM_BRIDGE (pios_com_bridge_id)
|
||||
#define PIOS_COM_VCP (pios_com_vcp_id)
|
||||
#define PIOS_COM_DEBUG PIOS_COM_AUX
|
||||
|
||||
//------------------------
|
||||
// TELEMETRY
|
||||
//------------------------
|
||||
#define TELEM_QUEUE_SIZE 80
|
||||
#define PIOS_TELEM_STACK_SIZE 624
|
||||
|
||||
//-------------------------
|
||||
// System Settings
|
||||
//
|
||||
// See also System_stm32f4xx.c
|
||||
//-------------------------
|
||||
//These macros are deprecated
|
||||
//please use PIOS_PERIPHERAL_APBx_CLOCK According to the table below
|
||||
//#define PIOS_MASTER_CLOCK
|
||||
//#define PIOS_PERIPHERAL_CLOCK
|
||||
//#define PIOS_PERIPHERAL_CLOCK
|
||||
|
||||
#define PIOS_SYSCLK 168000000
|
||||
// Peripherals that belongs to APB1 are:
|
||||
// DAC |PWR |CAN1,2
|
||||
// I2C1,2,3 |UART4,5 |USART3,2
|
||||
// I2S3Ext |SPI3/I2S3 |SPI2/I2S2
|
||||
// I2S2Ext |IWDG |WWDG
|
||||
// RTC/BKP reg
|
||||
// TIM2,3,4,5,6,7,12,13,14
|
||||
|
||||
// Calculated as SYSCLK / APBPresc * (APBPre == 1 ? 1 : 2)
|
||||
// Default APB1 Prescaler = 4
|
||||
#define PIOS_PERIPHERAL_APB1_CLOCK (PIOS_SYSCLK / 2)
|
||||
|
||||
// Peripherals belonging to APB2
|
||||
// SDIO |EXTI |SYSCFG |SPI1
|
||||
// ADC1,2,3
|
||||
// USART1,6
|
||||
// TIM1,8,9,10,11
|
||||
//
|
||||
// Default APB2 Prescaler = 2
|
||||
//
|
||||
#define PIOS_PERIPHERAL_APB2_CLOCK PIOS_SYSCLK
|
||||
|
||||
|
||||
//-------------------------
|
||||
// Interrupt Priorities
|
||||
//-------------------------
|
||||
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
|
||||
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
|
||||
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
|
||||
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
|
||||
|
||||
//------------------------
|
||||
// PIOS_RCVR
|
||||
// See also pios_board.c
|
||||
//------------------------
|
||||
#define PIOS_RCVR_MAX_DEVS 3
|
||||
#define PIOS_RCVR_MAX_CHANNELS 12
|
||||
#define PIOS_GCSRCVR_TIMEOUT_MS 100
|
||||
|
||||
//-------------------------
|
||||
// Receiver PPM input
|
||||
//-------------------------
|
||||
#define PIOS_PPM_MAX_DEVS 1
|
||||
#define PIOS_PPM_NUM_INPUTS 12
|
||||
|
||||
//-------------------------
|
||||
// Receiver PWM input
|
||||
//-------------------------
|
||||
#define PIOS_PWM_MAX_DEVS 1
|
||||
#define PIOS_PWM_NUM_INPUTS 8
|
||||
|
||||
//-------------------------
|
||||
// Receiver SPEKTRUM input
|
||||
//-------------------------
|
||||
#define PIOS_SPEKTRUM_MAX_DEVS 2
|
||||
#define PIOS_SPEKTRUM_NUM_INPUTS 12
|
||||
|
||||
//-------------------------
|
||||
// Receiver S.Bus input
|
||||
//-------------------------
|
||||
#define PIOS_SBUS_MAX_DEVS 1
|
||||
#define PIOS_SBUS_NUM_INPUTS (16+2)
|
||||
|
||||
//-------------------------
|
||||
// Receiver DSM input
|
||||
//-------------------------
|
||||
#define PIOS_DSM_MAX_DEVS 2
|
||||
#define PIOS_DSM_NUM_INPUTS 12
|
||||
|
||||
//-------------------------
|
||||
// Servo outputs
|
||||
//-------------------------
|
||||
#define PIOS_SERVO_UPDATE_HZ 50
|
||||
#define PIOS_SERVOS_INITIAL_POSITION 0 /* dont want to start motors, have no pulse till settings loaded */
|
||||
|
||||
//--------------------------
|
||||
// Timer controller settings
|
||||
//--------------------------
|
||||
#define PIOS_TIM_MAX_DEVS 6
|
||||
|
||||
//-------------------------
|
||||
// ADC
|
||||
// PIOS_ADC_PinGet(0) = Current sensor
|
||||
// PIOS_ADC_PinGet(1) = Voltage sensor
|
||||
// PIOS_ADC_PinGet(4) = VREF
|
||||
// PIOS_ADC_PinGet(5) = Temperature sensor
|
||||
//-------------------------
|
||||
#define PIOS_DMA_PIN_CONFIG \
|
||||
{ \
|
||||
{GPIOC, GPIO_Pin_0, ADC_Channel_10}, \
|
||||
{GPIOC, GPIO_Pin_1, ADC_Channel_11}, \
|
||||
{NULL, 0, ADC_Channel_Vrefint}, /* Voltage reference */ \
|
||||
{NULL, 0, ADC_Channel_TempSensor}, /* Temperature sensor */ \
|
||||
{GPIOC, GPIO_Pin_2, ADC_Channel_12} \
|
||||
}
|
||||
|
||||
/* we have to do all this to satisfy the PIOS_ADC_MAX_SAMPLES define in pios_adc.h */
|
||||
/* which is annoying because this then determines the rate at which we generate buffer turnover events */
|
||||
/* the objective here is to get enough buffer space to support 100Hz averaging rate */
|
||||
#define PIOS_ADC_NUM_CHANNELS 4
|
||||
#define PIOS_ADC_MAX_OVERSAMPLING 2
|
||||
#define PIOS_ADC_USE_ADC2 0
|
||||
#define PIOS_ADC_VOLTAGE_SCALE 3.30/4096.0
|
||||
|
||||
//-------------------------
|
||||
// USB
|
||||
//-------------------------
|
||||
#define PIOS_USB_MAX_DEVS 1
|
||||
#define PIOS_USB_ENABLED 1 /* Should remove all references to this */
|
||||
#define PIOS_USB_HID_MAX_DEVS 1
|
||||
|
||||
#endif /* STM3210E_INS_H_ */
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
@ -13,6 +13,8 @@
|
||||
#include "STM32F2xx_INS.h"
|
||||
#elif USE_STM32F4xx_OP
|
||||
#include "STM32F4xx_Revolution.h"
|
||||
#elif USE_STM32F4xx_RM
|
||||
#include "STM32F4xx_RevoMini.h"
|
||||
#else
|
||||
#error Board definition has not been provided.
|
||||
#endif
|
||||
|
||||
27
make/boards/revomini/board-info.mk
Normal file
27
make/boards/revomini/board-info.mk
Normal file
@ -0,0 +1,27 @@
|
||||
BOARD_TYPE := 0x09
|
||||
BOARD_REVISION := 0x02
|
||||
BOOTLOADER_VERSION := 0x01
|
||||
HW_TYPE := 0x00
|
||||
|
||||
MCU := cortex-m4
|
||||
CHIP := STM32F405RGT
|
||||
BOARD := STM32F4xx_RM
|
||||
MODEL := HD
|
||||
MODEL_SUFFIX :=
|
||||
|
||||
OPENOCD_JTAG_CONFIG := stlink-v2.cfg
|
||||
OPENOCD_CONFIG := stm32f4xx.stlink.cfg
|
||||
|
||||
# Note: These must match the values in link_$(BOARD)_memory.ld
|
||||
BL_BANK_BASE := 0x08000000 # Start of bootloader flash
|
||||
BL_BANK_SIZE := 0x00008000 # Should include BD_INFO region
|
||||
|
||||
# Leave the remaining 16KB and 64KB sectors for other uses
|
||||
|
||||
FW_BANK_BASE := 0x08020000 # Start of firmware flash
|
||||
FW_BANK_SIZE := 0x00040000 # Should include FW_DESC_SIZE
|
||||
|
||||
FW_DESC_SIZE := 0x00000064
|
||||
|
||||
OSCILLATOR_FREQ := 8000000
|
||||
SYSCLK_FREQ := 168000000
|
||||
Loading…
x
Reference in New Issue
Block a user