Update WhatsNew and Credits for release

2025-02-20 10:54:14 +01:00 · 2014-06-27 19:16:12 +02:00 · 2014-06-27 19:16:12 +02:00 · ce7f8eec7b
commit ce7f8eec7b
parent 1b823b7b92
2 changed files with 119 additions and 1 deletions
--- a/CREDITS.txt
+++ b/CREDITS.txt
@ -89,7 +89,6 @@ Mat Wellington
 Kendal Wells
 David Willis
 Dmitriy Zaitsev
-Bertrand Songis
 Andre Bernet
 Anthony Gomes
 Cliff Geerdes
@ -99,3 +98,7 @@ Laurent Lalanne
 Patrick Huebner
 Rich von Lehe
 Stefan Cenkov
+Andrés Chavarría Krauser
+Bertrand Oresve
+Cosimo Corrado
+
--- a/WHATSNEW.txt
+++ b/WHATSNEW.txt
@ -1,3 +1,118 @@
+--- RELEASE-14.06 --- Peanuts Schnapps ---
+This is the Mid 2014 release. 
+This version still supports the CopterControl and CC3D.
+It includes several additions and changes aimed at gps/navigation functionalities 
+(that are expected to be fully available on next release).
+
+Some additions in this release:
+- Addition of GPS assisted flight modes for revo: - Return To Base, Position hold, AutoCruise and Position Vario(LOS, FPV and NSEW);
+- Stabilization refactoring that enhance rate performances;
+- Sensor calibration has been redesigned for better usability;
+
+The full list of features, improvements and bugfixes in this release is accessible here:
+
+http://progress.openpilot.org/issues/?filter=11460
+
+** New Feature & Improvements
+    * [OP-943] - Start using F4's Core Coupled RAM for more than just the IRQ handler stack
+    * [OP-974] - Make Bootloader Version available while flight software is running
+    * [OP-975] - Reconsider the calibration process
+    * [OP-1068] - Add support for magnetometer calibration matrix in place of scaling parameters
+    * [OP-1149] - Handle thermal bias calculation/calibration to gyro and accel
+    * [OP-1150] - Create UI to allow users to perform board thermal calibration 
+    * [OP-1159] - Remove "Rev" checkboxes on input tab for channels on which it doesn't have an effect
+    * [OP-1161] - Add Alarm for Magnetometer if disturbed or uncalibrated
+    * [OP-1174] - Beautify Uploader gadget popups
+    * [OP-1194] - Scope gadget - plot and legend visibility state should be persisted between runs
+    * [OP-1198] - Allow GCS gadgets to save/restore individual state
+    * [OP-1216] - Refactor Flight Control Modules
+    * [OP-1230] - Automatically load the correct firmware file when GCS is running in a development environment
+    * [OP-1233] - Add make options to skip qmake and build a specific GCS directory
+    * [OP-1245] - Add GUI to control if, what, when and how to do flight side logging.
+    * [OP-1250] - Add GPS Protocol configuration in the Hardware configuration panel
+    * [OP-1258] - Update GCC ARM Embedded to 4.8-2014-q1
+    * [OP-1259] - Cruise Control tweaks
+    * [OP-1260] - Rattitude tweaks
+    * [OP-1273] - Implementation of the PixHawk airspeed sensor based on the MS4525DO
+    * [OP-1282] - Include I2C Alarm into Eagletree speed sensor module
+    * [OP-1287] - GPS assisted flight for Revo
+    * [OP-1299] - Autodetect number of cells in Battery module
+    * [OP-1302] - Improve on board led functionality
+    * [OP-1303] - Add PathPlan Alarm in System Health
+    * [OP-1307] - Create a bare DiscoveryF4 target for debugging and development purposes
+    * [OP-1308] - Set the same logic to CRITICAL Alarm and same logic to ERROR Alarm
+    * [OP-1312] - Implement a PIOS WS281x driver
+    * [OP-1319] - Fix minor spelling mistakes in fw code
+    * [OP-1335] - ConfigTaskWidget - Add support to bind GComboBox to integer property
+    * [OP-1339] - System Health panel improvement
+    * [OP-1350] - TakeOff location handling to be used with RTH 
+    * [OP-1365] - Add instrumentation functions for flight code
+
+** Bug
+    * [OP-1026] - Provide some standard method of calibrating CPU speed and load measurement for boards
+    * [OP-1033] - Data transfer errors on USB HID on F1 devices
+    * [OP-1043] - Ground OPLinkMini refuses to connect to one Revo unless first connected to another Revo
+    * [OP-1056] - GPS does not set home location when erased after lock has been established
+    * [OP-1080] - Unreliable detection of board through OPLink
+    * [OP-1100] - GCS plist for mac shows wrong associated filetypes, leftover from qtcreator
+    * [OP-1131] - Firmware mismatch check is not done if Uploader gadget is not active
+    * [OP-1172] - Some fonts are not defined in config files
+    * [OP-1196] - Board rotation in GCS not shown correctly upon connection but correctly saved in memory
+    * [OP-1212] - Fix Priority queue handling in telemetry 
+    * [OP-1227] - High CPU load in ratitude mode on CopterControl
+    * [OP-1232] - Setting high telemetry rates for periodic uavobject triggers eventsystem warning.
+    * [OP-1235] - Some fixes for altitude estimation
+    * [OP-1237] - Blank/Black Buttons on Vehicle Configuration Multirotor Throttle Curve
+    * [OP-1241] - TxPID Does not work for Bank 3 PID settings
+    * [OP-1243] - OPMap widget context menu duplicating some menu separators each time its opened
+    * [OP-1252] - Update GCS to qt 5.2.1
+    * [OP-1266] - Gyro and accel thermal compensation is not applied if one or more coefficients have negative value
+    * [OP-1267] - Incorrect UAV position on GCS OPMap after homeLocation modification
+    * [OP-1272] - Unable to debug in SWD mode a revo board
+    * [OP-1283] - SystemHealthGadgetWidget::updateAlarms misinterprets coordinates in SVG file
+    * [OP-1284] - RTB flies into ground if base is high
+    * [OP-1285] - Erase Settings ToolTip is wrong
+    * [OP-1286] - GCS Map "Go To Place" doesn't work
+    * [OP-1288] - GPS PositionHold immediately flies several meters away if Home is not close
+    * [OP-1291] - Fix matlab import after UAVTalk changes
+    * [OP-1294] - Fix stack sizes for CopterControl
+    * [OP-1295] - Autoupdate not working
+    * [OP-1296] - Altitude Hold causes copter to ascent at full throttle when far from home location
+    * [OP-1297] - OPMap fails to read in saved waypoints correctly
+    * [OP-1300] - SystemHealth gadget does not show "Configuration Alarm"
+    * [OP-1301] - Hardware settings can't be saved with CC/CC3D
+    * [OP-1304] - Revo stack alarm
+    * [OP-1314] - Fix Airspeed stack size
+    * [OP-1315] - Unable to arm UAV when AirspeedSensorType is set to GroundspeedBaseWindEstimation
+    * [OP-1323] - GCS font fixes
+    * [OP-1325] - Fix event system warnings to be errors
+    * [OP-1326] - Set AIrspeedSensor default back to "None"
+    * [OP-1327] - SystemAlarms must be non-acked
+    * [OP-1329] - Various fixes to airspeed module
+    * [OP-1330] - Cannot set homelocation.set=false when gps reception is optimal
+    * [OP-1331] - Input and Output Channel Configuration alignments issues
+    * [OP-1332] - PiOS alarms does not reset alarm state on timer overflow
+    * [OP-1333] - Output Channel Configuration  alignments issues
+    * [OP-1340] - Auto-update greyed out - not available
+    * [OP-1343] - GCS Configuration - Input Channel ResponseTime not saved
+    * [OP-1346] - Input Channel Response Time mismatch between GCS config screen and UAVObject
+    * [OP-1348] - Config Gadget flashes next panel when connecting/disconnecting board
+    * [OP-1351] - GCS Calibration UI polishing
+    * [OP-1352] - Headwind-improvements for FixedWingPathFollower
+    * [OP-1353] - HITL Flightgear fails to set Position and velocity correctly
+    * [OP-1354] - Current and voltage not shown in PFD
+    * [OP-1355] - Magnetometer calibration and board rotation don't play along
+    * [OP-1363] - Sanitychecks MUST check if magnetometers and GPS are enabled for any pathfollower modes (outdoor mode selected)
+    * [OP-1371] - Sanitychecks overzealous:  hitl/sitl broken
+
+** Tasks
+    * [OP-1274] - Update FreeRTOS to 8.0
+    * [OP-1337] - French translations updates (14.04/05)
+    * [OP-1254] - Update to QT5.2.1 for Linux x86/64
+    * [OP-1263] - Move SDL out of Qt install
+    * [OP-1309] - Stabilization refactoring
+
+
 --- RELEASE-14.01 --- Cruising Ratt ---
 This is the first 2014 software release. 
 This version still supports the  CopterControl and CC3D.