From 9f65db5e0bfaaa9feaf5c5d7789f639e0fc13c66 Mon Sep 17 00:00:00 2001 From: samguns Date: Sun, 15 Feb 2015 15:27:56 +0800 Subject: [PATCH 01/12] Initial commit of Chinese translation for GCS. --- .../translations/openpilotgcs_zh_CN.ts | 160 +++++++++--------- 1 file changed, 80 insertions(+), 80 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index d99163ba5..c1956fc0c 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -1,12 +1,12 @@ - + Application Failed to load core plug-in, reason is: %1 - + 无法载入插件, 原因: %1 @@ -21,7 +21,7 @@ OpenPilot GCS - Plugin loader messages - + OpenPilot GCS - 插件载入器信息 @@ -42,12 +42,12 @@ Environment - 环境 + 环境 <System Language> - + <系统语言> @@ -57,17 +57,17 @@ Restart required - + 重启程序 The language change will take effect after a restart of the OpenPilot GCS. - + 设定的语言环境将在OpenPilot GCS程序重启后生效. General settings - 基本设定 + 基本设定 @@ -82,37 +82,37 @@ User interface color: - + 界面颜色: Save configuration settings on exit: - + 程序退出时保存配置信息: Automatically connect an OpenPilot USB device: - + 通过USB自动连接OpenPilot设备: Automatically select an OpenPilot USB device: - + 通过USB自动选择一个OpenPilot设备: Use UDP Mirror - + 使用UDP镜像 Expert Mode - + 专家模式 Language: - + 语言: @@ -120,7 +120,7 @@ OpenPilot GCS - + OpenPilot GCS @@ -150,7 +150,7 @@ &Help... - + 帮助(&H) @@ -160,7 +160,7 @@ Save &GCS Default Settings - + 保存 &GCS 默认配置 @@ -232,67 +232,67 @@ Ctrl+Shift+F10 - Ctrl+Shift+F10 + Ctrl+Shift+F10 Meta+Shift - + Ctrl+Shift - + Split - 分栏 + 分栏 %1+Down - + Split Side by Side - 左右分栏 + 左右分栏 %1+Right - + Close Current View - + 关闭当前子窗口 %1+C - + Close All Other Views - + 关闭其它所有子窗口 %1+A - + Goto Next View - + 跳转到下一个子窗口 %1+N - + @@ -302,7 +302,7 @@ About &OpenPilot... - + 关于 &OpenPilot... @@ -315,7 +315,7 @@ General - 概要 + 概要 @@ -361,7 +361,7 @@ Environment - 环境 + 环境配置 @@ -398,7 +398,7 @@ Switch to %1 mode - 切换至%1模式 + 切换至%1模式 @@ -487,22 +487,22 @@ The name must not be empty - 名称不能为空 + 名称不能为空 The name must not contain any of the characters '%1'. - 名称不能包含 '%1' 中的任何一个 + 名称不能包含 '%1' 中的任何一个字符 The name must not contain '%1'. - 名称不能包含 '%1' + 名称不能包含 '%1' The name must not match that of a MS Windows device. (%1). - 名称不能与微软视窗设备名相同. (%1). + 名称不能与MS Windows系统设备名相同. (%1). @@ -530,37 +530,37 @@ Class name: - 类名: + 类名: Base class: - 基类: + 基类: Header file: - 头文件: + 头文件: Source file: - 源文件: + 源文件: Generate form: - 创建界面: + 创建界面: Form file: - 界面文件: + 界面文件: Path: - 路径: + 路径: @@ -570,7 +570,7 @@ Type information: - 类型信息: + 类型信息: @@ -598,12 +598,12 @@ Choose a directory - 选择目录 + 选择目录 Choose a file - 选择文件 + 选择文件 @@ -697,7 +697,7 @@ The name must not contain the '.'-character. - 名称不能包含 '.' + 名称中不能包含字符 '.' @@ -723,7 +723,7 @@ Choose the location - 选择位置 + 选择位置 @@ -746,12 +746,12 @@ The unsaved file %1 has been changed outside Qt Creator. Do you want to reload it and discard your changes? - 未保存的文件 %1 在 Qt Creator以外被改写，你想要重新载入并且丢弃现有的修改吗? + 未保存的文件 %1 在 Qt Creator以外被改写，你想要重新载入并且丢弃现有的修改吗? The file %1 has changed outside Qt Creator. Do you want to reload it? - 文件 %1 在 Qt Creator以外被改写，你想重新载入么? + 文件 %1 在 Qt Creator以外被改写，你想重新载入么? @@ -804,7 +804,7 @@ Developer: - + 开发者: @@ -843,7 +843,7 @@ State - 状态 + 状态 @@ -858,12 +858,12 @@ Location - 位置 + 位置 Developer - + 开发者 @@ -973,14 +973,14 @@ Cannot load plugin because dependencies are not resolved - 由于没有解决依赖所以无法载入插件 + 无法载入依赖关系,载入插件失败 Cannot load plugin because dependency failed to load: %1(%2) Reason: %3 - 因为无法载入依赖关系所以无法载入插件: %1(%2) + 无法载入依赖关系,载入插件失败: %1(%2) 原因: %3 @@ -1124,12 +1124,12 @@ Reason: %3 Options - 选项 + 选项 0 - 0 + 0 @@ -1137,62 +1137,62 @@ Reason: %3 Keyboard Shortcuts - 快捷键 + 快捷键 Filter: - 过滤器: + 过滤器: Command - 命令 + 命令 Label - 标签 + 标签 Shortcut - 快捷键 + 快捷键 Defaults - 默认 + 默认 Import... - 导入... + 导入... Export... - 输出... + 输出... Key Sequence - 按键顺序 + 按键顺序 Shortcut: - 快捷键: + 快捷键: Reset - 重置 + 重置 Remove - 删除 + 删除 @@ -1251,12 +1251,12 @@ Reason: %3 Update Available: %1 - + 有更新版本: %1 OpenPilot GCS Version: %1 - + OpenPilot GCS 版本号: %1 @@ -1264,7 +1264,7 @@ Reason: %3 Show Details - 显示详细信息 + 显示详细信息 @@ -1357,7 +1357,7 @@ Reason: %3 Output - 输出 + 输出 @@ -1433,7 +1433,7 @@ Reason: %3 Zoom - 缩放 + 缩放 @@ -1504,7 +1504,7 @@ Reason: %3 Cancel - 取消 + 取消 @@ -1625,7 +1625,7 @@ p, li { white-space: pre-wrap; } Apply - + 应用 From 8e5dfff5555f00a658f10850cd538272d06caaca Mon Sep 17 00:00:00 2001 From: Laurent Lalanne Date: Sun, 15 Feb 2015 10:17:53 +0100 Subject: [PATCH 02/12] Updated Ts file from source --- .../translations/openpilotgcs_zh_CN.ts | 1150 +++++++++++------ 1 file changed, 770 insertions(+), 380 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index c1956fc0c..c0d079248 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -1,10 +1,10 @@ - + Application - + Failed to load core plug-in, reason is: %1 无法载入插件, 原因: %1 @@ -14,7 +14,7 @@ 无法将命令行参数发送到执行中的进程，看起来进程未响应. - + Could not find 'Core.pluginspec' in %1 在%1 找不到 'Core.pluginspec' @@ -2075,9 +2075,18 @@ p, li { white-space: pre-wrap; } - Displays the SNR for each detected sat. -Satellite number (PRN) is displayed inside the green bar. -Sat SNR is displayed above (in dBHz) + <html><head/><body><p>Displays the SNR for each detected sat. Satellite number (PRN) is displayed inside the green bar (GPS) or orange bar (SBAS). Sat SNR is displayed above (in dBHz)</p></body></html> + + + + + Alt : + + + + + <html><head/><body><p>Location of GCS on the Earth</p></body></html> + Location of GCS on the Earth @@ -3698,7 +3707,7 @@ p, li { white-space: pre-wrap; } - Unknown compatibility level: + Unknown compatibility level: %1 @@ -4738,7 +4747,7 @@ Useful if you have accidentally changed some settings. Apply - + 应用 @@ -5118,7 +5127,7 @@ Apply or Save button afterwards. Apply - + 应用 @@ -5433,7 +5442,7 @@ Beware of not locking yourself out! Apply - + 应用 @@ -5538,7 +5547,7 @@ A setting of 0.00 disables the filter. Apply - + 应用 @@ -5926,16 +5935,6 @@ p, li { white-space: pre-wrap; } Calibration and Configuration Options - - - Start Configuration Wizard - - - - - Manual Calibration - - Flight Mode Switch Settings @@ -6061,7 +6060,7 @@ Be sure to set the Neutral position on all sliders before sending! Apply - + 应用 @@ -6204,6 +6203,41 @@ Applies and Saves all settings to SD index:5 + + + Assisted Control stick deadband + + + + + Assisted Control stick deadband in percents of full range (2-12) for use with GPSAssist. This can not be disabled. + + + + + Start Transmitter Setup Wizard + + + + + Start Manual Calibration + + + + + Assisted Control + + + + + <html><head/><body><p>Assisted Control options augment the primary flight mode. GPSAssist adds brake/hold to Stabilization and PositionHold.</p></body></html> + + + + + fieldname:FlightModeAssistMap + + MixerCurve @@ -6325,16 +6359,6 @@ Applies and Saves all settings to SD Output 输出 - - - Output Update Speed - - - - - Channel: - - - @@ -6411,7 +6435,7 @@ Be sure to set the Neutral position on all sliders before sending! Apply - + 应用 @@ -6425,15 +6449,8 @@ Applies and Saves all settings to SD 保存 - - Setup "RapidESC" here: usual value is 500 Hz for multirotor airframes. - - - - - 500 - 500 + 500 @@ -6445,6 +6462,49 @@ Applies and Saves all settings to SD Live Testing + + + 490 + 490 + + + + Output configuration + + + + + Bank(Channels): + + + + + Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value + + + + + + Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value + + + + + Mode: + + + + + Setup output mode. Use PWM or OneShot with Standard ESCs. +Several other ESCs like BLHeli 13+ can use the more advanced OneShot125. +When using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). + + + + + Setup output mode. Use PWM or OneShot with Standard ESCs.\nSeveral other ESCs like BLHeli 13+ can use the more advanced OneShot125.\nWhen using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). + + outputChannelForm @@ -6458,21 +6518,11 @@ Applies and Saves all settings to SD Link - - - # - - Channel Number - - - Minimum PWM value, beware of not overdriving your servo. - - Check to invert the channel. @@ -6504,14 +6554,8 @@ Applies and Saves all settings to SD - - Maximum PWM value, beware of not overdriving your servo. - - - - 0: - 0: + 0: @@ -6523,6 +6567,38 @@ Applies and Saves all settings to SD - + + + # - Bank + + + + + Minimum PWM value, beware of not overdriving your servo. +Using OneShot125 a value of 1000(uS) here will produce a pulse of 125(uS). + + + + + 0 + 0 + + + + Bank number + + + + + 0 + + + + + Maximum value, beware of not overdriving your servo. +Using OneShot125 a value of 2000(uS) here will produce a pulse of 250(uS). + + RevoSensorsWidget @@ -6582,7 +6658,7 @@ specific calibration button on top of the screen. Apply - + 应用 @@ -7240,7 +7316,7 @@ Useful if you have accidentally changed some settings. Apply - + 应用 @@ -8114,7 +8190,7 @@ only when system is armed without disabling the module. Apply - + 应用 @@ -8615,7 +8691,7 @@ only when system is armed without disabling the module. - + Save File @@ -8648,32 +8724,18 @@ only when system is armed without disabling the module. - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><style type="text/css"> -p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Firmware Update</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">It is necessary that your firmware and ground control software are the same version.</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To update your firmware to the correct version now:</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">- Unplug all batteries and USB from OpenPilot</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">- Ensure your board is powered down &amp; no LED's are active.</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">When you are ready you can start the upgrade below by pushing the button and follow the onscreen prompts, it is critical that nothing disturbs the board while the firmware is being written.</span></p></body></html> - - - - + Waiting for all OP boards to be disconnected. - + Please connect the board to the USB port (don't use external supply). - - Board going into bootloader mode. + + Board going into bootloader mode. Please wait. @@ -8693,17 +8755,44 @@ p, li { white-space: pre-wrap; } - Booting the board. + Booting the board. Please wait - + + Booting and erasing the board. Please wait + + + + + Something went wrong. + + + + + You will have to manually upgrade the board using the uploader plugin. + + + + Board updated, please press 'Next' to continue. - - Something went wrong, you will have to manually upgrade the board using the uploader plugin. + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Firmware Update</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">It is necessary that your firmware and ground control software are the same version.</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">When you are ready you can start the upgrade below by pushing the button. It is critical that nothing disturbs the board while the firmware is being written.</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">It is recommended that you erase all settings on the board when upgrading firmware. Using saved settings for a previous version of the firmware </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">may result in undefined behaviour</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"> and in worst case danger. It is possible to suppress the erase by deselecting the check box below.</span></p></body></html> + + + + + Erase all settings @@ -8884,16 +8973,6 @@ p, li { white-space: pre-wrap; } - Quadcopter H - - - - - Quadcopter H, Blackout miniH - - - - Hexacopter @@ -8928,7 +9007,7 @@ p, li { white-space: pre-wrap; } - + OpenPilot Multirotor Configuration @@ -8940,7 +9019,7 @@ Please select the type of multirotor you want to create a configuration for belo - + Hexacopter H @@ -8972,14 +9051,14 @@ Please select the type of multirotor you want to create a configuration for belo - - + + Start - - + + Stop 停止 @@ -9043,42 +9122,6 @@ p, li { white-space: pre-wrap; } - - RebootPage - - - WizardPage - - - - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><style type="text/css"> -p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:18pt; color:#ff0000;">PLEASE REBOOT YOUR CONTROLLER</span></p></body></html> - - - - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><style type="text/css"> -p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:18pt; color:#ffd500;">PLEASE REBOOT YOUR CONTROLLER</span></p></body></html> - - - - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><style type="text/css"> -p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; color:#000000;">The configuration created by the wizard contains settings that require a reboot of your controller. Please power cycle the controller before continuing. To power cycle the controller remove all batteries and the USB cable for at least 30 seconds.</span></p> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; color:#000000;">After 30 seconds, plug in the board again and wait for it to connect, this can take a few seconds. Then press next.</span></p></body></html> - - - SavePage @@ -9157,6 +9200,48 @@ p, li { white-space: pre-wrap; } <html><head/><body><p align="center"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">The Surface Vehicle section of the OpenPilot Setup Wizard is not yet implemented</span><br/></p></body></html> + + + OpenPilot Ground Vehicle Configuration + + + + + This part of the wizard will set up the OpenPilot controller for use with a ground vehicle utilizing servos. The wizard supports the most common types of ground vehicle, other variants can be configured by using custom configuration options in the Configuration plugin in the GCS. + +Please select the type of ground vehicle you want to create a configuration for below: + + + + + Car + + + + + This setup expects a traditional car with a rear motor and a front streering servo + + + + + Tank + + + + + This setup expects a traditional vehicle using only two motors and differential steering + + + + + Motorcycle + + + + + This setup currently expects a motorcyle setup, using one motor and one servo for steering. + + VehiclePage @@ -9616,16 +9701,6 @@ halting a running board. Erase Settings - - - Auto Update - - - - - Auto update - - OK @@ -9638,20 +9713,22 @@ halting a running board. - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><style type="text/css"> -p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">To upgrade the firmware in your boards,</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">press Auto Update and follow instructions</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">or</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">proceed as follows:</span></p> -<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt;"><br /></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">- Connect telemetry</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">- Once telemetry is running, press &quot;Halt&quot; above</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">- You will get a list of devices.</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">- You can then upload/download to/from each board as you wish</span></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">- You can resume operations by pressing &quot;Boot&quot;</span></p></body></html> + <html><head/><body><p>Automatic firmware upgrade.</p><p>This <span style=" font-weight:600; color:#e21111;">will erase ALL settings</span> in the board. Please<br/>backup settings before using this if you want to<br/>be able to retain them.</p><p>This can be done with board already connected<br/>or by connecting board after button is clicked.<br/>Running upgrade with a connected board works <br/>for all boards <span style=" font-weight:600;">except OPLink</span> that needs to be <br/>connected after the button is clicked.</p></body></html> + + + + + Upgrade && Erase + + + + + <html><head/><body><p>Automatic firmware upgrade. </p><p>This can be done with board already connected<br/>or by connecting board after button is clicked.<br/>Running upgrade with a connected board works <br/>for all boards <span style=" font-weight:600;">except OPLink</span> that needs to be <br/>connected after the button is clicked.</p></body></html> + + + + + Upgrade @@ -9659,8 +9736,26 @@ p, li { white-space: pre-wrap; } <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> -<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt;"><br /></p></body></html> +</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">To upgrade the firmware in your boards, press Upgrade or </p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Upgrade &amp; Erase and follow instructions.</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">or</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">proceed as follows:</p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Connect telemetry</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- Once telemetry is running, press &quot;Halt&quot; above</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- You will get a list of devices.</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- You can then upload/download to/from each board as you wish</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- You can resume operations by pressing &quot;Boot&quot;</p></body></html> + + + + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html> @@ -9735,7 +9830,7 @@ p, li { white-space: pre-wrap; } ConfigMultiRotorWidget - + Input @@ -9745,7 +9840,7 @@ p, li { white-space: pre-wrap; } 输出 - + @@ -9753,18 +9848,33 @@ p, li { white-space: pre-wrap; } - + Configuration OK - + <font color='red'>ERROR: Assign a Yaw channel</font> - + + Duplicate channel in motor outputs + + + + + Channel already used + + + + + Select output channel for Accessory%1 RcInput + + + + <font color='red'>ERROR: Assign all %1 motor channels</font> @@ -9832,23 +9942,22 @@ Do you still want to proceed? ConfigInputWidget - + http://wiki.openpilot.org/x/04Cf - Arming Settings are now set to 'Always Disarmed' for your safety. - + You will have to reconfigure the arming settings manually when the wizard is finished. After the last step of the wizard you will be taken to the Arming Settings screen. - + Next @@ -9988,20 +10097,35 @@ Move the %1 stick. - - Next/Skip + + Next / Skip - + + Stop Manual Calibration + + + + + <p>Arming Settings are now set to 'Always Disarmed' for your safety.</p><p>Be sure your receiver is powered with an external source and Transmitter is on.</p><p align='center'><b>Stop Manual Calibration</b> when done</p> + + + + + You will have to reconfigure the arming settings manually when the manual calibration is finished. + + + + + Start Manual Calibration + + + + Alternatively, click Next to skip this channel. - - - You will have to reconfigure the arming settings manually when the wizard is finished. - - Core::ConnectionManager @@ -10280,12 +10404,12 @@ Move the %1 stick. SetupWizard - + OpenPilot Setup Wizard - + Controller type: @@ -10321,18 +10445,19 @@ Move the %1 stick. - + - - + + + - + Unknown - + Vehicle type: @@ -10343,12 +10468,13 @@ Move the %1 stick. - + + Vehicle sub type: - + Tricopter @@ -10362,11 +10488,6 @@ Move the %1 stick. Quadcopter + - - - Quadcopter H - - Hexacopter @@ -10438,7 +10559,22 @@ Move the %1 stick. - + + Car + + + + + Tank + + + + + Motorcycle + + + + Input type: @@ -10459,36 +10595,26 @@ Move the %1 stick. - Spektrum satellite (DSM2) + Spektrum Satellite + + + + + Standard ESC (%1 Hz) - Spektrum satellite (DSMX10BIT) + Rapid ESC (%1 Hz) - - Spektrum satellite (DSMX11BIT) - - - - + Speed Controller (ESC) type: - - Standard ESC (50 Hz) - - - - - Rapid ESC (500 Hz) - - - - + Servo type: @@ -10576,7 +10702,7 @@ Move the %1 stick. - + Writing External Mag sensor settings @@ -10596,13 +10722,14 @@ Move the %1 stick. - + + Writing actuator settings - + Writing flight mode settings 1/2 @@ -10628,7 +10755,7 @@ Move the %1 stick. - + Writing mixer settings @@ -10638,7 +10765,7 @@ Move the %1 stick. - + Writing manual control defaults @@ -10840,51 +10967,101 @@ Move the %1 stick. UploaderGadgetWidget - + Connected Device - + Bootloader - + Bootloader? - - + + Device - + http://wiki.openpilot.org/display/Doc/Erase+board+settings - + Running 执行中 - - + Timed out while waiting for all boards to be disconnected! - - + + Timed out while waiting for a board to be connected! - + + To upgrade the OPLinkMini board please disconnect it from the USB port, press the Upgrade again button and follow instructions on screen. + + + + + Timed out while waiting for a board to be fully connected! + + + + + + Failed to enter bootloader mode. + + + + + Unknown board id '0x%1' + + + + + Firmware image not found. + + + + + Could not open firmware image for reading. + + + + + Could not enter direct firmware upload mode. + + + + + Firmware upload failed. + + + + + Failed to upload firmware description. + + + + + Timed out while booting. + + + + Please disconnect your OpenPilot board. @@ -10907,7 +11084,7 @@ Move the %1 stick. - + Waiting for all OpenPilot boards to be disconnected from USB. @@ -10923,12 +11100,42 @@ Move the %1 stick. - - Bringing the board into boot loader mode. + + Bringing the board into boot loader mode. Please wait. + + + + + Step %1 + + + + + Rebooting the board. Please wait. + Rebooting and erasing the board. Please wait. + + + + + Board was updated successfully. Press OK to finish. + + + + + Something went wrong. + + + + + Press OK to finish, you will have to manually upgrade the board. + + + + Preparing to upload firmware to the board. @@ -10943,28 +11150,7 @@ Move the %1 stick. - - Rebooting the board. - - - - - Board was updated successfully. - - - - - - Press OK to finish. - - - - - Something went wrong, you will have to manually upgrade the board. - - - - + http://wiki.openpilot.org/x/AoBZ @@ -11400,6 +11586,21 @@ The board will be restarted and all settings erased. - + + + Source: + + + + + The source of Curve 1 will always be Throttle + + + + + Throttle + + FixedWingConfigWidget @@ -11526,41 +11727,6 @@ The board will be restarted and all settings erased. Output channel assignments - - - Engine - - - - - Select output channel for the engine - - - - - Aileron 1 - - - - - Select output channel for the first aileron (or elevon) - - - - - Aileron 2 - - - - - Select output channel for the second aileron (or elevon) - - - - - Motor - - Select output channel for the first motor @@ -11631,6 +11797,16 @@ The board will be restarted and all settings erased. Mixer OK + + + Motor 1 + + + + + Vehicle frame + + MultiRotorConfigWidget @@ -11772,6 +11948,76 @@ Typical value is 50% for + or X configuration on quads. Reverse all motors + + + Select output channel for Accessory0 RcInput + + + + + Accessory1 + + + + + RcOutput channels + + + + + RC Output + + + + + Accessory0 + + + + + RC Input + + + + + Select output channel for Accessory2 RcInput + + + + + Select output channel for Accessory1 RcInput + + + + + Accessory2 + + + + + RcOutput curve + + + + + Curve + + + + + Select output curve for Accessory0 RcInput + + + + + Select output curve for Accessory1 RcInput + + + + + Select output curve for Accessory2 RcInput + + RevoHWWidget @@ -11844,7 +12090,7 @@ Beware of not locking yourself out! Apply - + 应用 @@ -11963,15 +12209,25 @@ even lead to crash. Use with caution. - + Chan %1 + + + Channel value + + + + + Channel Value + + OPLinkWidget - + Form 界面 @@ -12045,26 +12301,11 @@ even lead to crash. Use with caution. Max Chan - - - Channel 0 is 430 MHz, channel 249 is 440 MHz, and the channel spacing is 40 KHz. - - Min Chan - - - Channel Set - - - - - Sets the random sequence of channels to use for frequency hopping. - - Only PPM packets will be transmitted. @@ -12255,11 +12496,6 @@ even lead to crash. Use with caution. TX Dropped - - - TX Resent - - Tx Failure @@ -12308,7 +12544,7 @@ even lead to crash. Use with caution. Apply - + 应用 @@ -12320,6 +12556,21 @@ even lead to crash. Use with caution. Save 保存 + + + Channel 0 is 430 MHz, channel 250 is 440 MHz, and the channel spacing is 40 KHz. + + + + + 440.000 (MHz) + + + + + 430.000 (MHz) + + AboutDialog @@ -12622,7 +12873,7 @@ p, li { white-space: pre-wrap; } - + Name of Vehicle: @@ -12684,7 +12935,7 @@ It is suggested that if this is a first time configuration of your controller, r - + Current Tuning @@ -12797,9 +13048,9 @@ p, li { white-space: pre-wrap; } - + + - %1 µs @@ -12850,18 +13101,6 @@ p, li { white-space: pre-wrap; } WizardPage - - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><style type="text/css"> -p, li { white-space: pre-wrap; } -</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Congratulations!</span></p> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Setup wizard is completed.</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">This part of the setup procedure is now complete and you are one step away from completing the setup of your OpenPilot controller.</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To complete the setup please click the Radio Setup Wizard button below to close this wizard and go directly to the Radio Setup Wizard.</span></p></body></html> - - Go to Input Wizard... @@ -12873,6 +13112,18 @@ p, li { white-space: pre-wrap; } loaded in the current workspace. + + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Congratulations!</span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Setup wizard is completed.</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">This part of the setup procedure is now complete and you are one step away from completing the setup of your OpenPilot controller.</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To complete the setup please click the button below to close this wizard and go directly to the Transmitter Setup Wizard.</span></p></body></html> + + OPStartPage @@ -13128,11 +13379,6 @@ p, li { white-space: pre-wrap; } Comment: - - - Put comments here that doesn't fit in the categories above - - Photo: @@ -13159,7 +13405,7 @@ p, li { white-space: pre-wrap; } - + Fixed Wing - Aileron @@ -13223,6 +13469,11 @@ p, li { white-space: pre-wrap; } Multirotor - Hexacopter X + + + Multirotor - Hexacopter H + + Multirotor - Hexacopter Y6 @@ -13239,7 +13490,7 @@ p, li { white-space: pre-wrap; } - + Export settings @@ -13265,6 +13516,11 @@ Please try again. Images (*.png *.jpg) + + + Put comments here that don't fit in the categories above + + ActivityPanel @@ -13654,7 +13910,7 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic ConfigOutputWidget - + The actuator module is in an error state. This can also occur because there are no inputs. Please fix these before testing outputs. @@ -13664,45 +13920,11 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic - + http://wiki.openpilot.org/x/WIGf - - ConfigPipXtremeWidget - - - - - - Unbind - - - - - - - - Bind - - - - - Unknown - - - - - Information - - - - - To apply the changes when binding/unbinding the board must be rebooted or power cycled. - - - ConfigRevoHWWidget @@ -13737,12 +13959,12 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic ConfigStabilizationWidget - + Settings Bank %1 - + Thrust @@ -13752,7 +13974,73 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic - + + all to saved + + + + + all to default + + + + + to saved + + + + + to default + + + + + to others + + + + + The functions in this menu effect all fields in the settings banks, +not only the ones visible on screen. + + + + + Restore + + + + + Reset + 重置 + + + + Copy + 复制 + + + + Swap + + + + + from %1 + + + + + to %1 + + + + + with %1 + + + + Input % @@ -13765,7 +14053,7 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic ConfigVehicleTypeWidget - + Multirotor @@ -14057,11 +14345,26 @@ Please check the file. ScopeGadgetWidget - + Click legend to show/hide scope trace. Double click legend or plot to show/hide legend. + + + Clear + 清除 + + + + Copy to Clipboard + + + + + Options... + + BiasCalibrationUtil @@ -14074,7 +14377,7 @@ Double click legend or plot to show/hide legend. AirSpeedPage - + OpenPilot Airspeed Sensor Selection @@ -14170,6 +14473,16 @@ Please select the type of fixed-wing you want to create a configuration for belo This setup currently expects a flying-wing setup, an elevon plus rudder setup is not yet supported. Setup should include only two elevons, and should explicitly not include a rudder. + + + Vtail + + + + + This setup expects a traditional glider airframe using two independent aileron servos on their own channel (not connected by Y adapter) plus Vtail mixing elevator/rudder. + + GpsPage @@ -14536,7 +14849,7 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. TimedDialog - + Cancel 取消 @@ -14552,4 +14865,81 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. + + RebootDialog + + + Reboot + + + + + <html><head/><body><p>Please wait. Your controller is rebooting.<br/>This can take up to a minute.</p></body></html> + + + + + Ok + + + + + <font color='red'>Reboot failed!</font><p>Please perform a manual reboot by power cycling the board.<br>To power cycle the controller remove all batteries and the USB cable for at least 30 seconds.<br>After 30 seconds, plug in the board again and wait for it to connect, this can take a few seconds.<br>Then press Ok.</p> + + + + + QwtPlotRenderer + + + + + Documents + + + + + Images + + + + + Export File Name + + + + + ConfigOPLinkWidget + + + + + + Unbind + + + + + + + + Bind + + + + + Unknown + + + + + Information + + + + + To apply the changes when binding/unbinding the board must be rebooted or power cycled. + + + From b37429c89d94edc541f9cf34eb80a618024e38d6 Mon Sep 17 00:00:00 2001 From: samguns Date: Mon, 16 Feb 2015 16:09:33 +0800 Subject: [PATCH 03/12] 2015-02-16 --- .../translations/openpilotgcs_zh_CN.ts | 278 +++++++++--------- .../translations/translations.pro | 2 +- 2 files changed, 142 insertions(+), 138 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index c0d079248..eb0884962 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -646,7 +646,7 @@ Delete line - 删除行 + 删除行 @@ -1307,37 +1307,38 @@ Reason: %3 MainWindow - + 主窗口 Go - + 开始 Current File: - + 当前文件： Current Path: - + 当前路径： Choose Path - + 选择路径 Created #IF statements - + statements==声明？ + 创建#IF声明 Create NameSpace - + 创建命名空间 @@ -1415,19 +1416,19 @@ Reason: %3 Left - + 左 Center - + 中 Right - + 右 @@ -1463,7 +1464,7 @@ Reason: %3 Misc - + 其它 @@ -1489,7 +1490,7 @@ Reason: %3 MapRipper - + @@ -1499,7 +1500,7 @@ Reason: %3 Downloading tile - + 下载进度 @@ -1514,7 +1515,7 @@ Reason: %3 Downloading tile %1 of %2 - + 下载进度 %1 of %2 @@ -1522,32 +1523,32 @@ Reason: %3 Form - 界面 + 界面 Feed Forward - + 前馈调节 Accel Time Constant - + 加速时间常量 Decel Time Constant - + 减速时间常量 Mixer Settings - + 混合设置 Feed Forward Configuration - + 前馈配置 @@ -1556,7 +1557,9 @@ under the level where the motor starts to undershoot its target speed when decelerating. Do it after accel time is setup. - + 调节时请从0开始缓慢增加减速时间，直到电机转速刚好下降到低于减速的目标速度 + +配置完加速时间后再执行此配置。 @@ -1564,7 +1567,8 @@ Do it after accel time is setup. When tuning: Slowly raise accel time from zero to just under the level where the motor starts to overshoot its target speed. - + 单位：毫秒(ms) +调节时请从0开始缓慢增加加速时间，直到电机转速刚好上升到高于目标速度。 @@ -1574,7 +1578,7 @@ its target speed. Overall level of feed forward (in percentage). - + 前馈整体水平（百分比）。 @@ -1610,7 +1614,7 @@ p, li { white-space: pre-wrap; } Enable FF tuning - + 开启前馈参数调节 @@ -1625,7 +1629,7 @@ p, li { white-space: pre-wrap; } Apply - 应用 + 应用 @@ -1635,22 +1639,22 @@ p, li { white-space: pre-wrap; } Save - 保存 + 保存 Vehicle name - + 航模名 Enter name of vehicle. Max 20 characters. - + 输入最多不超过20个字符的航模名称。 Vehicle Setup Wizard... - + 航模设备配置向导... @@ -1675,27 +1679,27 @@ p, li { white-space: pre-wrap; } Configuration - 配置 + 配置 Clone - + 复制 Delete - 删除 + 删除 Lock - + 锁定 Settings - 设置 + 设置 @@ -1703,88 +1707,88 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Workspaces - + 工作区 Number of workspaces: - + 工作区数量： Change details of workspace: - + 修改工作区详情： Details - 详情 + 详情 Icon: - + 图标： Name: - 名称: + 名称: Environment - 环境 + 环境 Images (*.png *.jpg *.bmp *.xpm) - + Choose icon - + 选择图标 Placement: - + 位置： Top - + 顶部 Bottom - + 底部 Allow reordering: - + 重新排序： General - 概要 + 概要 Restore last selected workspace on startup - + 启动时恢复上一次选择的工作区 Remember last used workspace on restart - + 重启时记住最后一次使用的工作区 @@ -1792,7 +1796,7 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 @@ -1920,27 +1924,27 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 GCS Control - + GCS控制 Flight Mode: - + 飞行模式： UDP Control - + UDP控制 Arm switch (Accessory0) - + 解锁开关 (Accessory0) @@ -1948,67 +1952,67 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Mode: - + 模式： Serial Connection - + 串口连接 Data Bits: - + 数据位： Stop Bits: - + 停止位： Parity: - + 奇偶校验： Timeout(ms): - + 超时(毫秒)： Port: - 端口: + 端口: Port Speed: - + 波特率： Flow Control: - + 流控制： IP Connection - + IP连接 Host - 主机 + 主机 Port - + 端口 @@ -2021,22 +2025,22 @@ p, li { white-space: pre-wrap; } Coord: - + 坐标： Unknown - + 未知 Speed: - + 速度： Heading: - + 方向： @@ -2061,33 +2065,33 @@ p, li { white-space: pre-wrap; } Connect - + 连接 Disconnect - + 断开 GPS Data Stream - + GPS数据流 <html><head/><body><p>Displays the SNR for each detected sat. Satellite number (PRN) is displayed inside the green bar (GPS) or orange bar (SBAS). Sat SNR is displayed above (in dBHz)</p></body></html> - + <html><head/><body><p>显示检测到的每个卫星信噪比. Satellite number (PRN) is displayed inside the green bar (GPS) or orange bar (SBAS). Sat SNR is displayed above (单位dBHz)</p></body></html> Alt : - + 海拔： <html><head/><body><p>Location of GCS on the Earth</p></body></html> Location of GCS on the Earth - + <html><head/><body><p>地面站(GCS)在地球上的位置</p></body></html> @@ -2095,217 +2099,217 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Choose flight simulator: - + 选择飞行模拟器： Path executable: - + 可执行文件路径： Data directory: - + 数据目录： Choose flight simulator executable - + 选择飞行模拟器 Choose flight simulator data directory - + 选择飞行模拟器数据目录 Check this box to start the simulator on the local computer - + 选中此复选框以确认在本机上启动模拟器 Start simulator on local machine - + 在本机启动模拟器 For communication with sim computer via network. Should be the IP address of one of the interfaces of the GCS computer. - + 本机IP地址。 Only required if running simulator on remote machine. Should be the IP of the machine on which the simulator is running. - + 远端运行模拟器的电脑IP地址。 AttitudeRaw (gyro, accels) - + 原始姿态传感器（陀螺仪，加速度）数据 ms - + 毫秒 AttitudeState - + 姿态数据 use values from simulator - + 使用模拟器数据 0 - update once, or every N seconds - + 0 - 立即刷新, 或每N秒刷新一次 m - + IP addresses - + IP地址 Local host: - + 本机地址: Port: - 端口: + 端口: IP port for receiving data from sim - + 接收模拟器数据的端口 Remote host: - + 远端地址： IP port for sending data to sim - + 发送数据到模拟器的端口 Program Parameters - + 模拟器程序参数 Add noise to sensor simulation - + 给模拟器传感器加入干扰 Add noise - + 加入干扰 Initial latitude (decimal): - + 初始纬度： Initial longitude (decimal): - + 初始经度： Attitude Data - + 姿态数据 Refresh rate: - + 刷新频率： send simulated inertial data to board - + 将模拟惯量数据发送到飞控板 calculate from simulated sensor data - + 从模拟传感器数值计算 Spatial Data - + 空间数据 Ground truth position and velocity - + 地面位置和速度 GPS data - + GPS数据 Other Data - + 其它数据 AirspeedState - + 飞行速度状态 BaroAltitude - + 气压海拔 Range detection: - + 检测范围： Map transmitter commands... - + 控制器命令映射... from hardware to simulator (via ManualCtrl) - + 从控制器到模拟器 from simulator to hardware (via GCSReceiver) - + 从模拟器到控制器 Maximum GCS to hardware output rate: - + GCS到控制器的最大输出频率： Set the maximum rate at which GCS sends simulator data to the hardware - + GCS发送模拟器数据到控制器的最大允许频率 @@ -2313,42 +2317,42 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Request update - + 请求更新 Start - + 开始 Send update - + 发送更新 Stop - 停止 + 停止 AutoPilot disconnected - + 断开自动驾驶仪 Simulator disconnected - + 断开模拟器 Clear Log - + 清空记录 @@ -2356,12 +2360,12 @@ p, li { white-space: pre-wrap; } Dialog - 对话框 + 对话框 Import Export Settings - + 导入导出配置 @@ -2369,17 +2373,17 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Items - 项 + 项目 General (Workspace, Key-Bindings) - + 工作区，快捷键 diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/translations.pro b/ground/openpilotgcs/share/openpilotgcs/translations/translations.pro index 6338ebf5d..e428c3712 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/translations.pro +++ b/ground/openpilotgcs/share/openpilotgcs/translations/translations.pro @@ -3,7 +3,7 @@ include(../../../openpilotgcs.pri) # Commented languages with outdated translations # Allow removing the 'C' language in default config files at first start. # Need to be uncommented for update in all languages files (make ts) -LANGUAGES = fr # de es ru zh_CN +LANGUAGES = fr zh_CN # de es ru # var, prepend, append defineReplace(prependAll) { From 621edd4463580c6700e8dace0515b74f4d3808a5 Mon Sep 17 00:00:00 2001 From: samguns Date: Tue, 17 Feb 2015 22:19:21 +0800 Subject: [PATCH 04/12] 2015-2-17 Add more translations, still ongoing --- .../translations/openpilotgcs_zh_CN.ts | 576 ++++++++++-------- 1 file changed, 307 insertions(+), 269 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index eb0884962..1ad14fc16 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -21,7 +21,7 @@ OpenPilot GCS - Plugin loader messages - OpenPilot GCS - 插件载入器信息 + OpenPilot地面站 - 插件载入器信息 @@ -1137,7 +1137,7 @@ Reason: %3 Keyboard Shortcuts - 快捷键 + 键盘快捷键 @@ -1251,12 +1251,12 @@ Reason: %3 Update Available: %1 - 有更新版本: %1 + 最新版本: %1 OpenPilot GCS Version: %1 - OpenPilot GCS 版本号: %1 + OpenPilot GCS 当前版本: %1 @@ -1495,12 +1495,12 @@ Reason: %3 Currently ripping from: - + 正在从： Downloading tile - 下载进度 + 正在下载贴图 @@ -1510,7 +1510,7 @@ Reason: %3 Currently ripping from:%1 at Zoom level %2 - + 正在从：%1 下载缩放等级为：%2 的卫星地图 @@ -1559,7 +1559,7 @@ its target speed when decelerating. Do it after accel time is setup. 调节时请从0开始缓慢增加减速时间，直到电机转速刚好下降到低于减速的目标速度 -配置完加速时间后再执行此配置。 +设置好加速时间常量后再执行此设置。 @@ -1599,7 +1599,7 @@ In 'units per second', a sound default is 1000. FeedForward - + 前馈量 @@ -1619,12 +1619,12 @@ p, li { white-space: pre-wrap; } Takes you to the wiki page - + 点击打开wiki知识库 Send to board, but don't save permanently (flash or SD). - + 发送到控制板，但不保存到flash或SD卡 @@ -1644,17 +1644,17 @@ p, li { white-space: pre-wrap; } Vehicle name - 航模名 + 航模名字 Enter name of vehicle. Max 20 characters. - 输入最多不超过20个字符的航模名称。 + 输入最多不超过20个字符的模型名字。 Vehicle Setup Wizard... - 航模设备配置向导... + 航模配置向导... @@ -1671,7 +1671,19 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">Beware: Feed Forward Tuning will launch all engines around mid-throttle, you have been warned!</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">Remove your props initially, and for fine-tuning, make sure your airframe is safely held in place. Wear glasses and protect your face and body.</span></p></td></tr></table></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> +<table border="0" style="-qt-table-type: root; margin-top:4px; margin-bottom:4px; margin-left:4px; margin-right:4px;"> +<tr> +<td style="border: none;"> +<p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-size:14pt; font-weight:600; color:#ff0000;">配置前馈需特别注意</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">警告：前馈调节会把所有电机打开到中等油门量。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">开始调节前，请确保你已经将螺旋桨移除，并且整个机架已经被安全固定好。我们建议您佩戴好护目镜，采取必要措施保护好脸和身体。</span></p></td></tr></table></body></html> @@ -1713,17 +1725,17 @@ p, li { white-space: pre-wrap; } Workspaces - 工作区 + 工作区布局 Number of workspaces: - 工作区数量： + 应用数量： Change details of workspace: - 修改工作区详情： + 修改应用详情： @@ -1748,7 +1760,7 @@ p, li { white-space: pre-wrap; } Images (*.png *.jpg *.bmp *.xpm) - + 图片文件 (*.png *.jpg *.bmp *.xpm) @@ -1773,7 +1785,7 @@ p, li { white-space: pre-wrap; } Allow reordering: - 重新排序： + 允许重新排序： @@ -1783,12 +1795,12 @@ p, li { white-space: pre-wrap; } Restore last selected workspace on startup - 启动时恢复上一次选择的工作区 + 启动时恢复上一次选择的应用 Remember last used workspace on restart - 重启时记住最后一次使用的工作区 + 重启时记住最后一次使用的应用 @@ -2144,7 +2156,7 @@ p, li { white-space: pre-wrap; } Only required if running simulator on remote machine. Should be the IP of the machine on which the simulator is running. - 远端运行模拟器的电脑IP地址。 + 远端运行模拟器的电脑IP地址，如果模拟器运行另外一台电脑上的话。 @@ -2254,7 +2266,7 @@ p, li { white-space: pre-wrap; } Spatial Data - 空间数据 + 地理数据 @@ -2388,98 +2400,98 @@ p, li { white-space: pre-wrap; } All Gadgets - + 所有应用布局 GCS Settings file (*.xml) - + OpenPilot地面站配置文件 (*.xml) Save GCS Settings to file... - + 保存地面站配置... Can't write file - + 保存文件失败 The settings have been exported to - + 配置已经导出到 Load GCS Settings from file .. - + 读取地面站配置 .. Can't read file - + 读取文件失败 The settings have been imported from - + 配置已经从 . Restart the application. - + .导入，请重启程序。 http://wiki.openpilot.org/x/OQBj - + All your settings will be deleted! - + 所有配置已经被删除！ You must restart the GCS in order to activate the changes. - + 所有改动将在地面站程序重启后生效。 Plugins - + 插件 Export the GCS settings selected in the checkboxes above. - + 导出复选框选中的配置信息。 Export... - 输出... + 导出... Import settings from the config file, only for the items checked above. - + 导入复选框选中的配置信息。 Import... - 导入... + 导入... Resets your GCS configuration to its default configuration. - + 将地面站配置重置为默认值。 Reset Config - + 重置 @@ -2487,32 +2499,32 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 TCP connection - + TCP连接 UDP connection - + UDP连接 Port - + 端口 Host Name/Number - + 主机名字 settings - + 配置 @@ -2618,32 +2630,32 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Play - + 开始 Pause - + 暂停 Status: - + 状态: Idle - + 空闲 Playback speed: - + 回放速度： @@ -2651,44 +2663,46 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 3D model: - + 3D模型文件： Background image: - + 背景图片： VBO allow for performance gains for GPUs that support it (most cards). This may cause cards with faulty drivers to crash. - + 绝大多数显卡GPU都支持VBO以提升性能。如果遇到不支持VBO的显卡，强行启用将会造成显卡驱动崩溃。 Enable VBOs: - + 启用VBO： Select the image that is shown in the background. - + 背景图片。 Select the 3D model file here. - + 3D模型文件。 Click to enable the use of Vertical Blanking. It is not enabled by default because some graphic cards do not support it, and crash the GCS. Enabling improves performance, though, so you can experiment at your own risk. - + 勾选复选框启用VBO（Vertex Buffer Object）。 +开启VBO可以显著提升3D显示性能，但某些显卡并不支持该功能，一旦开启将会造成GCS崩溃退出。 +请在开启该功能之前，确保你的显卡具备支持VBO的能力。 @@ -2696,17 +2710,17 @@ support it, and crash the GCS. Enabling improves performance, though, so you can Form - 界面 + 界面 Sound Collection - + 声音方案集合 Language - 语言 + 方案 @@ -2715,97 +2729,97 @@ support it, and crash the GCS. Enabling improves performance, though, so you can p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Select the sound collection</span></p></body></html> - + 点击选择声音方案 Sound Notifications - + 声音通知 Enable Sounds - + 开启声音 Play - + 播放 Add - 添加 + 添加 Modify - + 修改 Delete - 删除 + 删除 DataObject - + 事件类型 ObjectField - + 事件 Sound1: - + 声音1： Sound2: - + 声音2： Sound3: - + 声音3： Equal to - + 等于 Large than - + 大于 Lower than - + 小于 In range - + 在范围内 Choose sound collection directory - + 选择声音方案集路径 settings - + 设置 Notification - + 语音通知 @@ -2813,157 +2827,161 @@ p, li { white-space: pre-wrap; } OpenPilot GCS Edit Waypoint - + OpenPilot GCS 航点编辑 Number - + 编号 Latitude - + 纬度 Longitude - + 经度 Altitude - + 海拔 meters - + 米 Description - + 描述 Locked - 锁定 + 锁定 degrees - + 度 OK - OK + 确定 Cancel - 取消 + 取消 Position - + 位置 Relative to Home - + 与原点的相对位置 Bearing - + 方位？ + 方位 Distance - + 距离 0 - 0 + 0 Velocity - + 速度 Relative altitude - + 不确定是高度还是海拔 + 相对高度 m/s - + 米/秒 Mode - + 模式 param1 - + 参数1 param2 - + 参数2 param3 - + 参数3 param4 - + 参数4 End condition - + 结束条件 Condition - + 条件 Command - 命令 + 命令 Jump Destination + ? Error Destination + ? Previous - + 上一页 Next - + 下一页 @@ -2971,17 +2989,17 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 labelStatus - + %v - + @@ -2989,17 +3007,17 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 labelStatus - + %v - + @@ -3008,292 +3026,293 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 Enter place to find - + 输入你要查找的位置 london - + 伦敦 new york - + 纽约 paris - + 巴黎 Find place - + 查找位置 Places - + 位置还是地点？ + 位置 New Item - + 新条目 Waypoints - + 航点 New waypoints - + 新建航点 New - 新建 + 新建 Open waypoints - + 打开航点 Open - 打开 + 打开 Save waypoints - + 保存航点 Save - 保存 + 保存 Add a waypoint - + 添加航点 Add - 添加 + 添加 Zoom in - + 放大 Zoom level - + 缩放比例 Zoom out - + 缩小 Center map over home position - + 以原点为地图中心 Center map over UAV position - + 以无人机为地图中心 Map rotation follows UAV heading - + 始终保持无人机前进方向为正前方 UAV hold position - + 无人机悬停 Hold - + 悬停 UAV go home - + 无人机返回原点 Home - 主页 + 原点 Move UAV to previous waypoint - + 无人机返回上一个航点 Previous WP - + 上一个航点 Move UAV to next waypoint - + 无人机前往下一个航点 Next WP - + 下一个航点 UAV go! - + 无人机出发！ Go - + 出发 UAV position - + 无人机坐标 labelUAVPos - + Map position - + 地图中心点坐标 labelMapPos - + Mouse position - + 鼠标在地图上的坐标 labelMousePos - + labelMapZoom - + %v - + Normal Map Mode - + 普通地图模式 Normal - + 普通模式 Magic Waypoint Map Mode - + 特殊航点模式 Magic Waypoint - + 特殊航点模式 Go To Place: - + 前往： ... - + Click to move the UAV to the magic waypoint position - + 无人机前往特殊航点位置 Move to WP - + 前往航点 Move the magic waypoint to the home position - + 将特殊航点移到原点位置 Home WP - + UAV - + Heading - + @@ -3301,7 +3320,7 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 @@ -3309,7 +3328,7 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 @@ -3786,7 +3805,7 @@ p, li { white-space: pre-wrap; } Logging - + 日志 @@ -5370,22 +5389,22 @@ The same value is used for all axes. Form - 界面 + 界面 HW settings - + 硬件设置 Messages - + Changes on this page only take effect after board reset or power cycle - + 所有配置信息将在控制板重启后才生效 @@ -5410,17 +5429,18 @@ The same value is used for all axes. USB HID Port - + USB HID 端口 MainPort - + 不用翻译，保持跟硬件板上一致 + FlexiPort - + @@ -5430,39 +5450,40 @@ The same value is used for all axes. RcvrPort - + 遥控接收器端口 Takes you to the wiki page - + 点击打开wiki知识库 Send to OpenPilot but don't write in SD. Beware of not locking yourself out! - + 发送配置到OpenPilot控制板，但不保存到SD卡。 +断电后配置将消失！ Apply - 应用 + 应用 Applies and Saves all settings to SD. Beware of not locking yourself out! - + 发送配置到控制板，并保存到SD卡。 Save - 保存 + 保存 GPS protocol : - + GPS协议 : @@ -5902,22 +5923,22 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 RC Input - + 遥控输入 Roll/Pitch/Yaw stick deadband - + 横滚/俯仰/方向 操纵杆死区 Stick deadband in percents of full range (0-10), zero to disable - + 死区占操纵杆全程的百分比 （0-10），0为无死区 @@ -5932,62 +5953,62 @@ p, li { white-space: pre-wrap; } Cancel - 取消 + 取消 Calibration and Configuration Options - + 校准及设置 Flight Mode Switch Settings - + 飞行模式设置 Yaw - + 方向 Pitch - + 俯仰 Roll - + 横滚 Pos. 1 - + 档位 1 Pos. 2 - + 档位 2 Pos. 3 - + 档位 3 Pos. 4 - + 档位 4 Pos. 5 - + 档位 5 Pos. 6 - + 档位 6 @@ -6000,7 +6021,7 @@ Setup the flight mode channel on the RC Input tab if you have not done so alread Select the stabilization mode on this position (manual/stabilized/auto) - + 选择稳定模式（手动/稳定/自动） @@ -6012,140 +6033,148 @@ It will be 2 or 3 for most of setups, but it also can be up to 6. In that case you have to configure your radio mixers so the whole range from min to max is split into N equal intervals, and you may set arbitrary channel value for each flight mode. - + 最后一句待定 + 遥控器上所有飞行模式切换开关总数。 +默认是3个。 +对于大多数设置只需要2～3种飞行模式。 +你也可以设置6个，这样的话你可能需要将遥控器上调节旋钮的全程分成N等分。 Arming Settings - + 解锁设置 Arm airframe using throttle off and: - + 解锁飞行器需要油门关闭和： Indicate the control used for arming the airframe, in addition to setting the throttle to its minimum position. In other terms "Throttle Off". - + 配合油门关闭解锁飞行器。 Arming timeout: - + 再次锁定时间间隔： After the time indicated here, the frame go back to disarmed state. Set to 0 to disable (recommended for soaring fixed wings). - + 经过这段时间间隔后，飞行器将重新被置为锁定状态。 +设置0将不会再次锁定（建议飞得又高又远的固定翼飞行器设置为0，不要锁定）。 seconds (0 to disable). - + 秒（0表示不再次锁定）。 Airframe disarm is done by throttle off and opposite of above combination. - + 油门关闭与上面相反的操作来锁定飞行器。 Takes you to the wiki page - + 点击打开wiki知识库 Send to OpenPilot but don't write in SD. Be sure to set the Neutral position on all sliders before sending! - + 发送配置到OpenPilot控制板，但不保存到SD卡。 +并确保遥控器上所有拨杆都放置在中间位置！ Apply - 应用 + 应用 Be sure to set the Neutral position on all sliders before sending! Applies and Saves all settings to SD - + 发送配置到控制板，并保存到SD卡。 +并确保遥控器上所有拨杆都放置在中间位置！ Save - 保存 + 保存 Input Channel Configuration - + 输入通道设置 Stabilization Modes Configuration - + 稳定模式设置 Thrust - + 不确定是什么概念，暂时用强推 + 强推 Stabilized 1 - + 稳定模式 1 Stabilized 2 - + 稳定模式 2 Stabilized 3 - + 稳定模式 3 Stabilized 4 - + 稳定模式 4 Stabilized 5 - + 稳定模式 5 Stabilized 6 - + 稳定模式 6 Flight Mode Switch Positions - + 飞行模式切换开关档位 Settings Bank - + 设置槽 Flight Mode Count - + 飞行模式数量 <html><head/><body><p>Avoid &quot;Manual&quot; for multirotors! Never select &quot;Altitude&quot;, &quot;VelocityControl&quot; or &quot;CruiseControl&quot; on a fixed wing!</p></body></html> - + <html><head/><body><p>切忌不要为多轴飞行器设置 &quot;手动&quot; 模式！ 不要为固定翼飞行器设置 &quot;姿态&quot;, &quot;速度控制&quot; 或 &quot;巡航控制&quot;！</p></body></html> Flight Mode - + 飞行模式 @@ -6210,32 +6239,32 @@ Applies and Saves all settings to SD Assisted Control stick deadband - + 辅助控制操纵杆死区 Assisted Control stick deadband in percents of full range (2-12) for use with GPSAssist. This can not be disabled. - + 死区占操纵杆全程的百分比 （2-12）。不能关闭此设置。 Start Transmitter Setup Wizard - + 遥控器设置向导 Start Manual Calibration - + 手动校准 Assisted Control - + 辅助控制 <html><head/><body><p>Assisted Control options augment the primary flight mode. GPSAssist adds brake/hold to Stabilization and PositionHold.</p></body></html> - + <html><head/><body><p>辅助控制选项可有效增强该飞行模式。 GPS辅助提供了定点/定高稳定悬停功能。</p></body></html> @@ -6356,101 +6385,106 @@ Applies and Saves all settings to SD Form - 界面 + 界面 Output - 输出 + 电机输出 - - + Update rate: - + 更新频率： 50 - 50 + 50 60 - 60 + 60 125 - 125 + 125 165 - 165 + 165 270 - 270 + 270 330 - 330 + 330 400 - 400 + 400 Motors spin at neutral output when armed and throttle below zero (be careful) - + 解锁后且油门关闭时，电机中速旋转（危险） Move the servos using the sliders. Two important things: - Take extra care if the output is connected to an motor controller! - Will only work if the RC receiver is working (failsafe) - + 拖动滑动杆来测试伺服电机转动。 +注意事项： +- 格外注意电机输出是否连接了电调！ +- 当且仅当遥控器正常时才工作(失控保护） Test outputs - + 输出测试 Takes you to the wiki page - + 点击打开wiki知识库 Send to OpenPilot but don't write in SD. Be sure to set the Neutral position on all sliders before sending! - + 发送配置到OpenPilot控制板，但不保存到SD卡。 +并确保遥控器上所有拨杆都放置在中间位置！ Apply - 应用 + 应用 Be sure to set the Neutral position on all sliders before sending! Applies and Saves all settings to SD - + 发送配置到控制板，并保存到SD卡。 +并确保遥控器上所有拨杆都放置在中间位置！ Save - 保存 + 保存 500 @@ -6459,55 +6493,59 @@ Applies and Saves all settings to SD Output Channel Configuration - + 输出通道配置 Live Testing - + 实时测试 490 - 490 + 490 Output configuration - + 输出配置 Bank(Channels): - + 输出端口： Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value - + 设置PWM：通常多轴飞行器是490Hz。OneShot以及OneShot125则不需要配置此项 Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value - + 设置PWM：通常多轴飞行器是490Hz。OneShot以及OneShot125则不需要配置此项 Mode: - + 模式： Setup output mode. Use PWM or OneShot with Standard ESCs. Several other ESCs like BLHeli 13+ can use the more advanced OneShot125. When using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - + 标准电调配置为PWM或OneShot模式。 +类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。 +当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后再输出给电调 （例如：1000/8 = 125, 2000/8 = 250).。 Setup output mode. Use PWM or OneShot with Standard ESCs.\nSeveral other ESCs like BLHeli 13+ can use the more advanced OneShot125.\nWhen using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - + 标准电调配置为PWM或OneShot模式。 +类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。 +当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后再输出给电调 （例如：1000/8 = 125, 2000/8 = 250).。 From 94ba26ed119808f60d4a3cf6f566291d640bde96 Mon Sep 17 00:00:00 2001 From: samguns Date: Thu, 19 Feb 2015 22:34:09 +0800 Subject: [PATCH 05/12] End of the day. Add more translations. --- .../translations/openpilotgcs_zh_CN.ts | 369 ++++++++++-------- 1 file changed, 210 insertions(+), 159 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index 1ad14fc16..202624eb1 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -5404,27 +5404,27 @@ The same value is used for all axes. Changes on this page only take effect after board reset or power cycle - 所有配置信息将在控制板重启后才生效 + 所有配置信息将在控制板重启才生效 Telemetry speed: - + 管理端口速率： GPS speed: - + 串口GPS波特率： ComUsbBridge speed: - + USB转串口端口波特率： Select the speed here. - + 选择速率。 @@ -5445,7 +5445,7 @@ The same value is used for all axes. USB VCP Port - + @@ -5933,7 +5933,7 @@ p, li { white-space: pre-wrap; } Roll/Pitch/Yaw stick deadband - 横滚/俯仰/方向 操纵杆死区 + 横滚/俯仰/方向 操纵杆死区 @@ -5943,12 +5943,12 @@ p, li { white-space: pre-wrap; } Back - + 上一项 Next - + 下一项 @@ -6034,10 +6034,10 @@ In that case you have to configure your radio mixers so the whole range from min to max is split into N equal intervals, and you may set arbitrary channel value for each flight mode. 最后一句待定 - 遥控器上所有飞行模式切换开关总数。 + 遥控器上所有飞行模式切换开关总数。 默认是3个。 对于大多数设置只需要2～3种飞行模式。 -你也可以设置6个，这样的话你可能需要将遥控器上调节旋钮的全程分成N等分。 +你也可以设置6个，这样的话你可能需要将遥控器上调节旋钮的全程分成若干等分，并为每个区间指定对应的数字范围。 @@ -6159,7 +6159,7 @@ Applies and Saves all settings to SD Settings Bank - 设置槽 + 设置槽 @@ -6179,7 +6179,7 @@ Applies and Saves all settings to SD <html><head/><body><p>Select which set of roll rates / max bank angles / PIDs you want active on this switch position.</p></body></html> - + <html><head/><body><p>为每个飞行模式档位选择一组姿态稳定设置。.</p></body></html> @@ -8263,12 +8263,12 @@ only when system is armed without disabling the module. Form - 界面 + 界面 Save to file - + 保存到文件 @@ -8495,22 +8495,22 @@ only when system is armed without disabling the module. Dialog - 对话框 + 对话框 Latitude: - + 纬度： Longitude: - + 经度： Altitude: - + 海拔： @@ -8715,32 +8715,32 @@ only when system is armed without disabling the module. Dialog - 对话框 + 对话框 Save - 保存 + 保存 Close - 关闭 + 关闭 Connection Diagram - + 连接示意图 Save File - + 保存文件 Images (*.png *.xpm *.jpg) - + 图形文件(*.png *.xpm *.jpg) @@ -8748,77 +8748,77 @@ only when system is armed without disabling the module. WizardPage - + Upgrade now - + 马上升级 Upgrade - + 升级 Ready... - + 准备就绪... Waiting for all OP boards to be disconnected. - + 请断开连接着的OpenPilot控制板。 Please connect the board to the USB port (don't use external supply). - + 请将控制板用USB线连接到电脑（断开电调上连接的电池）。 Board going into bootloader mode. Please wait. - + 控制板进入bootloader模式，请稍等。 Loading firmware. - + 正在读取固件。 Uploading firmware. - + 烧写固件。 Uploading description. - + 写入描述信息。 Booting the board. Please wait - + 正在启动，请稍等 Booting and erasing the board. Please wait - + 正在重启并清除配置，请稍等 Something went wrong. - + 出错啦。 You will have to manually upgrade the board using the uploader plugin. - + 请到Firmware应用中手动更新控制板固件。 Board updated, please press 'Next' to continue. - + 更新完毕，请点击“下一步”。 @@ -8830,12 +8830,21 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">It is necessary that your firmware and ground control software are the same version.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">When you are ready you can start the upgrade below by pushing the button. It is critical that nothing disturbs the board while the firmware is being written.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">It is recommended that you erase all settings on the board when upgrading firmware. Using saved settings for a previous version of the firmware </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">may result in undefined behaviour</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"> and in worst case danger. It is possible to suppress the erase by deselecting the check box below.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">更新固件</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">请确保固件和当前运行的控制站（GCS）版本一一对应</span>。</p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">当设备准备好后，点击下面Upgrade按钮开始升级，整个过程中请勿断电。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">由于继续使用旧固件系统下的设置<strong>可能会造成无法预料灾难性后果</strong>，强烈建议更新固件的同时清除原有设置信息。</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"></span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">你可以取消勾选“清除所有设置”，保留原有配置，只升级固件。</span></p> +</body></html> Erase all settings - + 清除所有设置 @@ -8843,58 +8852,58 @@ p, li { white-space: pre-wrap; } WizardPage - + Connection device: - + 设备及连接类型： Detected board type: - + 控制板型号： Connect - + 连接设备 <Unknown> - + 未知设备 OpenPilot CopterControl - + OpenPilot CopterControl 3D - + OpenPilot Revolution - + OpenPilot OPLink Radio Modem - + OpenPilot DiscoveryF4 - + Disconnect - + 断开设备 @@ -8906,7 +8915,15 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To continue, the wizard needs to determine the configuration required for the type of OpenPilot controller you have. When connected, the wizard will attempt to automatically detect the type of board.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If the board is already connected and successfully detected, the board type will already be displayed. You can </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">Disconnect</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"> and select another device if you need to detect another board.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If your board is not connected, please connect the board to a USB port on your computer and select the device from the list below. Then press </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">Connect</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot控制板</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">当设备正确连接以后，程序会自动识别控制板类型，确定下一步操作。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">你可以点击“<strong>断开设备</strong>”，在下拉菜单中选择正确的连接类型和设备。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">如果您的OpenPilot控制板尚未连接，请把它通过USB连接好，在下拉菜单中选择正确的设备型号，然后点击<strong>连接设备</strong>。</span></p> +</body></html> @@ -8927,37 +8944,38 @@ p, li { white-space: pre-wrap; } WizardPage - + PWM - One cable per channel - + PWM - 每个通道独立用一根线 + PWM - One cable per channel PWM - + PPM - One cable for all channels - + PPM - 所有通道共用一根线 PPM - + Futaba S-BUS - + Spektrum Satellite - + @@ -8968,17 +8986,24 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot Input Signal Configuration</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">The OpenPilot controller supports many different types of input signals. Please select the type of input that matches your receiver configuration. If you are unsure, just leave the default option selected and continue the wizard.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Some input options require the OpenPilot controller to be rebooted before the changes can take place. If an option that requires a reboot is selected, you will be instructed to do so on the next page of this wizard.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot遥控器输入配置</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">OpenPilot控制板支持绝大多数遥控器，请选择对应的的遥控器类型。如果你不确定是什么类型，则可以保持默认设置并继续下一步操作。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">某些遥控器类型选择后，需要OpenPilot控制板重启才能生效。当你选择了这样的遥控器类型后，点击下一步将会自动重启控制板。</span></p> +</body></html> S.Bus - + DSM Sat - + @@ -9169,28 +9194,29 @@ p, li { white-space: pre-wrap; } WizardPage - + Write configuration to controller - + 保存配置 Save - 保存 + 保存 Ready... - + 准备就绪... An OpenPilot controller must be connected to your computer to save the configuration. Please connect your OpenPilot controller to your computer and try again. - + 系统未检测到任何OpenPilot设备。 +请再次确认OpenPilot控制板已经和电脑正确连接。 @@ -9290,47 +9316,48 @@ Please select the type of ground vehicle you want to create a configuration for WizardPage - + Tricopter, Quadcopter, Hexacopter - + 三轴，四周，六轴 Multirotor - + 多轴飞行器 CCPM Helicopters - + CCPM直升机 Helicopter - + 直升机 Airplane, Sloper, Jet - + 不确定 + 普通，牵引式， 喷气式 Fixed wing - + 固定翼飞行器 Car, Boat, U-Boat - + 车， 船，潜艇 Surface - + 陆地航模 @@ -9342,7 +9369,15 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To continue, the wizard needs to know what type of vehicle the OpenPilot controller board is going to be used with. This step is crucial since much of the following configuration is unique per vehicle type.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Go ahead and select the type of vehicle for which you want to create a configuration.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">The current version only provides functionality for Multirotors and Fixed-wing aircraft.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">航模类型选择</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请选择正确的航模类型。务必确保您的选择和实际器械一致，因为你接下来的配置将会根据不同的模型有所区别。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">目前的OpenPilot GCS版本只支持多轴飞行器和固定翼飞机。</span></p> +</body></html> + @@ -9600,32 +9635,32 @@ then close the dialog. Form - 界面 + 界面 Device Information - + 设备信息 TextLabel - TextLabel + TextLabel CPU Serial: - + CPU序号： Firmware Information - + 固件信息 BlRevision - + @@ -9633,7 +9668,7 @@ then close the dialog. Form - 界面 + 界面 @@ -9641,12 +9676,13 @@ then close the dialog. to bootloader mode. (Only enabled if telemetry link is established, either through serial or USB) - + 终止控制板上运行着的操作系统和控制程序，返回到bootloader模式（类似PC的BIOS） +(请确保控制板已经通过串口或USB成功连接) Halt - + 终止系统 @@ -9656,12 +9692,16 @@ Only useful if the system is halted If telemetry is not running, select the link using the dropdown menu on the right. - + 启动系统。 +只有控制板处于bootloader模式（控制板上绿色LED常亮，蓝色LED慢速闪烁）才有用。 + +从右边的下拉菜单中选择适当的连接方式。 + Boot - + 启动系统 @@ -9671,24 +9711,25 @@ Only useful if the system is halted If telemetry is not running, select the link using the dropdown menu on the right. - + Safe Boot - + 安全模式 Reset the system. (Only enabled if telemetry link is established, either through serial or USB) - + 重启系统。 +（当设备通过串口或USB连接成功后才能发送该命令） Reset - 重置 + 重启系统 @@ -9696,12 +9737,13 @@ through serial or USB) recover a system which does not boot. Rescue is possible in USB mode only. - + 手动恢复不能正确启动系统的控制板。 +只允许USB连接方式下使用此功能。 Rescue - + 系统恢复 @@ -9711,12 +9753,15 @@ method using this combo box. You can use this to force a communication channel when doing a "Boot" (button on the left). It is updated automatically when halting a running board. - + 如果管理端口尚未连接控制板，请从下拉菜单中选择一项正确的连接方式。 + +你也可以在重启系统过程中（点击左边“重启系统”按钮）强制指定一种连接方式。 +执行“终止系统”后，该选项会自动更新为当前连接方式。 Refresh the list of serial ports - + 刷新接口列表 @@ -9726,7 +9771,7 @@ halting a running board. Running - 执行中 + 系统运行中 @@ -9741,17 +9786,17 @@ halting a running board. Erase Settings - + 清除设置 OK - OK + 确定 Progress - + 进度 @@ -9761,7 +9806,7 @@ halting a running board. Upgrade && Erase - + 升级固件并清除设置 @@ -9771,7 +9816,7 @@ halting a running board. Upgrade - + 升级固件 @@ -10448,42 +10493,42 @@ Move the %1 stick. OpenPilot Setup Wizard - + OpenPilot设置向导 Controller type: - + 控制板： OpenPilot CopterControl - + OpenPilot CopterControl 3D - + OpenPilot Revolution - + OpenPilot Nano - + OpenPilot OPLink Radio Modem - + OpenPilot DiscoveryF4 Development Board - + @@ -10496,204 +10541,205 @@ Move the %1 stick. Unknown - + 未知设备 Vehicle type: - + 航模类型： Multirotor - + 多轴飞行器 Vehicle sub type: - + 飞行器类型： Tricopter - + 三轴 Quadcopter X - + X型四轴 Quadcopter + - + 十字型四轴 Hexacopter - + 六轴 Hexacopter Coax (Y6) - + 同轴型六轴这样翻译是否合适？ + 同轴型六轴 （Y6） Hexacopter H - + H型六轴 Hexacopter X - + X型六轴 Octocopter - + 八轴 Octocopter Coax X - + 同轴X型八轴 Octocopter Coax + - + 同轴十字型八轴 Octocopter V - + V型八轴 Fixed wing - + 固定翼 Dual Aileron - + 双副翼 Aileron - + 副翼 Elevon - + 升降副翼 Helicopter - + 直升机 Surface vehicle - + 陆地航模 Car - + 汽车 Tank - + 坦克 Motorcycle - + 摩托车 Input type: - + 遥控输入类型： PWM (One cable per channel) - + PWM（每个通道独立用一根线） PPM (One cable for all channels) - + PPM（所有通道共用一根线） Futaba S.Bus - + Spektrum Satellite - + Standard ESC (%1 Hz) - + 标准电调（%1 Hz） Rapid ESC (%1 Hz) - + 高速电调（%1 Hz） Speed Controller (ESC) type: - + 电子调速器（ESC）类型： Servo type: - + 伺服舵机类型： Analog Servos (50 Hz) - + 模拟伺服舵机（50Hz） Digital Servos (333 Hz) - + 数字伺服舵机（333Hz） GPS type: - + GPS类型： OpenPilot Platinum - + OpenPilot v8 or Generic UBLOX GPS - + OpenPilot v8或通用UBLOX GPS Generic NMEA GPS - + 通用NMEA GPS None - 无 + 无 @@ -10721,12 +10767,13 @@ Move the %1 stick. Vehicle Setup Wizard - + 航模设置向导 Export Wizard Vehicle Template - + 这样翻译合适吗？ + 导出模型模板 @@ -10891,7 +10938,7 @@ Move the %1 stick. Close - 关闭 + 关闭 @@ -14912,22 +14959,26 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Reboot - + 重启 <html><head/><body><p>Please wait. Your controller is rebooting.<br/>This can take up to a minute.</p></body></html> - + <html><head/><body><p>正在重启，请稍等。<br/>整个过程大概需要一分钟。</p></body></html> Ok - + 确定 <font color='red'>Reboot failed!</font><p>Please perform a manual reboot by power cycling the board.<br>To power cycle the controller remove all batteries and the USB cable for at least 30 seconds.<br>After 30 seconds, plug in the board again and wait for it to connect, this can take a few seconds.<br>Then press Ok.</p> - + <font color='red'>重启失败！</font> +<p>请手动执行控制板重启。<br> +首先请确保断开电池和USB连接线并持续等待30秒。<br> +30秒后重新插上USB连接线，等待重新连接。<br> +然后点击确定。</p> From 169b1f91bf6c2fb43f72a64b0f333c53d42d6526 Mon Sep 17 00:00:00 2001 From: samguns Date: Fri, 20 Feb 2015 22:40:33 +0800 Subject: [PATCH 06/12] Add more translations --- .../translations/openpilotgcs_zh_CN.ts | 246 ++++++++++-------- 1 file changed, 141 insertions(+), 105 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index 202624eb1..d9243d8ba 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -398,7 +398,7 @@ Switch to %1 mode - 切换至%1模式 + 切换至%1界面 @@ -6016,7 +6016,10 @@ p, li { white-space: pre-wrap; } on your remote. It shows currently active flight mode. Setup the flight mode channel on the RC Input tab if you have not done so already. - + 滑动指示条显示当前飞行模式档位。 +当你在遥控器上切换飞行模式时，指示条实时显示当前模式档位。 + +如果飞行模式通道尚未设置，请在“遥控输入”选项页里面进行配置。 @@ -6154,7 +6157,7 @@ Applies and Saves all settings to SD Flight Mode Switch Positions - 飞行模式切换开关档位 + 飞行模式档位 @@ -8837,8 +8840,8 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">更新固件</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">请确保固件和当前运行的控制站（GCS）版本一一对应</span>。</p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">当设备准备好后，点击下面Upgrade按钮开始升级，整个过程中请勿断电。</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">由于继续使用旧固件系统下的设置<strong>可能会造成无法预料灾难性后果</strong>，强烈建议更新固件的同时清除原有设置信息。</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"></span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">你可以取消勾选“清除所有设置”，保留原有配置，只升级固件。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">由于继续使用原有固件系统下的设置<strong>可能会造成无法预料的灾难性后果</strong>，强烈建议更新固件的同时清除原有设置信息。</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"></span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">你也可以取消勾选“清除所有设置”，保留原有配置，只升级固件。</span></p> </body></html> @@ -8862,7 +8865,7 @@ p, li { white-space: pre-wrap; } Detected board type: - 控制板型号： + 设备型号： @@ -8915,12 +8918,12 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To continue, the wizard needs to determine the configuration required for the type of OpenPilot controller you have. When connected, the wizard will attempt to automatically detect the type of board.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If the board is already connected and successfully detected, the board type will already be displayed. You can </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">Disconnect</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"> and select another device if you need to detect another board.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If your board is not connected, please connect the board to a USB port on your computer and select the device from the list below. Then press </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">Connect</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">.</span></p></body></html> - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot控制板</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">当设备正确连接以后，程序会自动识别控制板类型，确定下一步操作。</span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot设备识别</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">当设备正确连接以后，程序会自动识别控制板类型，根据不同设备类型决定下一步操作。</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">你可以点击“<strong>断开设备</strong>”，在下拉菜单中选择正确的连接类型和设备。</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">如果您的OpenPilot控制板尚未连接，请把它通过USB连接好，在下拉菜单中选择正确的设备型号，然后点击<strong>连接设备</strong>。</span></p> </body></html> @@ -8949,8 +8952,7 @@ p, li { white-space: pre-wrap; } PWM - One cable per channel - PWM - 每个通道独立用一根线 - PWM - One cable per channel + PWM - 每个通道独立用一根线 @@ -8990,8 +8992,8 @@ p, li { white-space: pre-wrap; } <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot遥控器输入配置</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">OpenPilot控制板支持绝大多数遥控器，请选择对应的的遥控器类型。如果你不确定是什么类型，则可以保持默认设置并继续下一步操作。</span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot遥控器类型设置</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">OpenPilot支持绝大多数遥控器，请选择对应的的遥控器类型。如果你不确定手上的遥控器是什么类型，请保持默认设置并点击下一步继续操作。</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">某些遥控器类型选择后，需要OpenPilot控制板重启才能生效。当你选择了这样的遥控器类型后，点击下一步将会自动重启控制板。</span></p> </body></html> @@ -9011,84 +9013,88 @@ p, li { white-space: pre-wrap; } Tricopter - + 三轴 The Tricopter uses three motors and one servo. The servo is used to give yaw authority to the rear motor. The front motors are rotating in opposite directions. The Tricopter is known for its sweeping yaw movement and it is very well suited for FPV since the front rotors are spread wide apart. - + 最后一句先保留，稍后翻译 + 三轴飞行器通常由三个高速旋转电机和一个伺服舵机组成。前面两个电机以相反方向旋转，伺服舵机协同尾部电机控制方向。 Quadcopter X - + X型四轴 The X Quadcopter uses four motors and is the most common multi rotor configuration. Two of the motors rotate clockwise and two counter clockwise. The motors positioned diagonal to each other rotate in the same direction. This setup is perfect for sport flying and is also commonly used for FPV platforms. - + X型四轴是目前最常见的一种多轴飞行器，非常适合于飞行竞赛和FPV。 Quadcopter + - + 十字型四轴 The Plus(+) Quadcopter uses four motors and is similar to the X Quadcopter but the forward direction is offset by 45 degrees. The motors front and rear rotate in clockwise and the motors right and left rotate counter-clockwise. This setup was one of the first to be used and is still used for sport flying. This configuration is not that well suited for FPV since the fore rotor tend to be in the way of the camera. - + 十字型四轴飞行器类似于X型四轴，区别在于前进方向相差45度。十字型四轴前后两个电机顺时针旋转，左右两个电机逆时针旋转。由于正前方有电机阻挡，这种类型的四轴飞行器并不适合FPV。 Hexacopter - + 六轴 A multirotor with six motors, one motor in front. - + 拥有六个电机的多轴飞行器，正前方只有一个电机（图中1号电机）。 A multirotor with six motors, two motors in front. - + 拥有六个电机的多轴飞行器，正前方有两个电机（1号和6号电机）。 A multirotor with six motors in two rows. - + 拥有六个电机的多轴飞行器，六个电机排列成平行的两行，每行三个电机。 Hexacopter Coax (Y6) - + 同轴型六轴 （Y6） A multirotor with six motors mounted in a coaxial fashion. - + 在同一电机轴方向上放置两个电机的六轴飞行器。 Hexacopter X - + X型六轴 OpenPilot Multirotor Configuration - + OpenPilot多轴飞行器设置 This part of the wizard will set up the OpenPilot controller for use with a flying platform utilizing multiple rotors. The wizard supports the most common types of multirotors. Other variants of multirotors can be configured by using custom configuration options in the Configuration plugin in the GCS. Please select the type of multirotor you want to create a configuration for below: - + OpenPilot目前支持绝大部分的多轴飞行器类型。 +本页中未列出来的类型，请稍候进入“设置”界面中单独进行设置。 + +请选择多轴飞行器类型： Hexacopter H - + H型六轴 @@ -9236,12 +9242,12 @@ p, li { white-space: pre-wrap; } WizardPage - + Show connection diagram for configuration - + 显示连接示意图 @@ -9253,7 +9259,15 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">The first part of this wizard is now complete. All information required to create a basic OpenPilot controller configuration for a specific vehicle has been collected.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Below is a summary of the configuration and a button that links to a diagram illustrating how to connect required hardware and the OpenPilot Controller with the current configuration.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">The following steps require that your OpenPilot controller is connected according to the diagram, remains connected to the computer by USB, and that you have a battery ready but </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">do not</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"> connect it right now, you will be told when to in later steps of this wizard.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot设置概要</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">截至目前，所有基本的OpenPilot设备配置已经完成。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">下面框中简要列出了设备类型和基本配置。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请点击“CONNECTION DIAGRAM&quot;查看硬件连接示意图。在接下来的设置开始之前，请参照连接示意图完成航模连接，继续使用USB连接OpenPilot设备，但切记<strong>不要连接电池</strong>，在后面的设置过程中会提示您何时接上电池。</span></p> +</body></html> @@ -9374,8 +9388,8 @@ p, li { white-space: pre-wrap; } p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">航模类型选择</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请选择正确的航模类型。务必确保您的选择和实际器械一致，因为你接下来的配置将会根据不同的模型有所区别。</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">目前的OpenPilot GCS版本只支持多轴飞行器和固定翼飞机。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请选择正确的航模类型。务必确保您的选择和实际情况一致，因为接下来的配置将会根据不同的模型有所区别。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">目前OpenPilot GCS只支持多轴飞行器和固定翼飞机。</span></p> </body></html> @@ -10498,7 +10512,7 @@ Move the %1 stick. Controller type: - 控制板： + 设备类型： @@ -11058,101 +11072,101 @@ Move the %1 stick. Connected Device - + 连接设备 Bootloader - + Bootloader? - + Device - + 设备 http://wiki.openpilot.org/display/Doc/Erase+board+settings - + Running - 执行中 + 系统运行中 Timed out while waiting for all boards to be disconnected! - + 等待超时，请确保所有设备已经断开连接！ Timed out while waiting for a board to be connected! - + 等待超时，请确保设备已经连接！ To upgrade the OPLinkMini board please disconnect it from the USB port, press the Upgrade again button and follow instructions on screen. - + 升级OPLinkMin，首先请断开USB连接，然后再点击升级按钮，按提示进行下一步操作。 Timed out while waiting for a board to be fully connected! - + 等待超时，请确保设备已经正确连接！ Failed to enter bootloader mode. - + 无法进入bootloader模式。 Unknown board id '0x%1' - + 未知设备 ID '0x%1' Firmware image not found. - + 未找到固件。 Could not open firmware image for reading. - + 无法读取固件。 Could not enter direct firmware upload mode. - + 无法进入直接上传固件模式。 Firmware upload failed. - + 固件烧写失败。 Failed to upload firmware description. - + 固件描述信息烧写失败。 Timed out while booting. - + 重启超时。 Please disconnect your OpenPilot board. - + 请断开OpenPilot设备。 @@ -11160,134 +11174,135 @@ Move the %1 stick. System Rescue - + 系统恢复 Please connect your OpenPilot board. - + 请连接OpenPilot设备。 Board must be connected to the USB port! - + 设备必须通过USB端口连接！ Waiting for all OpenPilot boards to be disconnected from USB. - + 正在等待所有OpenPilot设备从USB端口上移除。 Timing out in %1 seconds - + %1秒后超时 Please connect the OpenPilot board to the USB port. - + 请把OpenPilot设备通过USB端口连接起来。 Bringing the board into boot loader mode. Please wait. - + 正在进入bootloader模式，请稍候。 Step %1 - + 步骤%1 Rebooting the board. Please wait. - + 正在重启，请稍候。 Rebooting and erasing the board. Please wait. - + 正在重启并删除设备上全部内容，请稍候。 Board was updated successfully. Press OK to finish. - + 更新成功，请点击确定按钮。 Something went wrong. - + 出错啦。 Press OK to finish, you will have to manually upgrade the board. - + 你需要手动升级设备，请点击确定按钮。 Preparing to upload firmware to the board. - + 正在准备更新固件。 Uploading firmware to the board. - + 正在烧写固件。 Uploading description of the new firmware to the board. - + 正在烧写固件描述信息。 http://wiki.openpilot.org/x/AoBZ - + Confirm Settings Erase? - + 确定清除所有配置？ Do you want to erase all settings from the board? - + 是否需要清除所有配置？ Settings cannot be recovered after this operation. The board will be restarted and all settings erased. - + 设备即将重启并清除所有配置。 +一旦开始执行，目前的配置信息将无法恢复。 Cannot Halt Board! - + 终止系统失败！ The controller board is armed and can not be halted. - + 控制板已经解锁，无法终止系统。 Please make sure the board is not armed and then press Halt again to proceed or use Rescue to force a firmware upgrade. - + 请确认控制板已经处于锁定状态，然后点击“终止系统”或使用“系统恢复”来强制更新固件。 Cannot Reset Board! - + 重启系统失败！ The controller board is armed and can not be reset. - + 控制板已经解锁，无法重启系统。 Please make sure the board is not armed and then press reset again to proceed or power cycle to force a board reset. - + 请确认控制板已经处于锁定状态，然后再次点击“重启系统”或者给控制板掉电，再上电重启。 @@ -13149,7 +13164,7 @@ p, li { white-space: pre-wrap; } WizardPage - + @@ -13160,27 +13175,34 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot Output Signal Configuration</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To set an optimal configuration of the output signals powering your motors, the wizard needs to know what type of Electronic Speed Controllers (ESCs) you will use and what their capabilities are.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Please select one of the options below. If you are unsure about the capabilities of your ESCs, just leave the default option selected and continue the wizard.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot输出信号设置</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">为了更好的给电机输出控制信号，系统需要知道电子速度控制器（电调）的类型。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请在下方选择电调类型。如果你不确定，请保持默认选项，点击下一步继续操作。</span></p> +</body></html> Standard ESC 50Hz - + 50Hz的标准电调 Standard ESC - + 标准电调 Turbo PWM ESC 400Hz - + 490Hz PWM高速电调 Rapid ESC - + 高速电调 @@ -13219,7 +13241,7 @@ p, li { white-space: pre-wrap; } WizardPage - + @@ -13237,7 +13259,21 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Disregarding this warning puts you at</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600; color:#000000;"> risk of injury</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">!</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Now that your props are removed we can get started. Ready?</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">欢迎使用OpenPilot设置向导</span><img src=":/setupwizard/resources/wizard.png" style="float: right;" /></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导将带领您完成首次使用OpenPilot控制器所需的所有基本步骤。您可能会被询问一系列问题用于设置首次飞行所需的必要参数。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导并不涵盖所有设置内容，您可以在完成设置向导以后进入“设置”界面进行其它功能的配置。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">警告：请确认在进行下一步操作之前 </span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">所有螺旋桨已经被从模型上安全拆卸</span>!</span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请不要忽略该警告，否则会有受伤风险！</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">准备好了吗？请点击“下一步”开始。</span></p> +</body></html> @@ -14658,22 +14694,22 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Firmware Version Mismatch! - + 固件版本不一致！ GCS and firmware versions of the UAV objects set do not match which can cause configuration problems. - + 固件版本与当前OpenPilot GCS不匹配，可能会引起配置错误。 GCS version: %1 - + GCS版本：%1 Firmware version: %1 - + 固件版本：%1 @@ -14881,58 +14917,58 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. HW Revision: - + 硬件版本： Firmware CRC: - + 校验和： BL version: - + Bootloader版本： Firmware tag: - + 标签： Tagged officially released firmware build - + 此固件为官方发布正式版 Untagged or custom firmware build - + 无法识别的固件或非官方固件 Git commit hash: - + Firmware date: - + 编译时间： Unknown - + 未知 Custom Firmware Build - + 非官方固件 @@ -14940,18 +14976,18 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Cancel - 取消 + 取消 Timing out in %1 seconds - + %1秒后超时 Timed out after %1 seconds - + %1秒后超时 From c468831f2c7b961fb44b0d9639b709a59779b25c Mon Sep 17 00:00:00 2001 From: samguns Date: Sat, 21 Feb 2015 22:28:09 +0800 Subject: [PATCH 07/12] Add more translations --- .../translations/openpilotgcs_zh_CN.ts | 235 +++++++++++------- 1 file changed, 149 insertions(+), 86 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index d9243d8ba..8378c7d7f 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -6403,7 +6403,7 @@ Applies and Saves all settings to SD Update rate: - 更新频率： + 频率： @@ -6443,7 +6443,7 @@ Applies and Saves all settings to SD Motors spin at neutral output when armed and throttle below zero (be careful) - 解锁后且油门关闭时，电机中速旋转（危险） + 解锁后且油门关闭时，电机开始按照上方设定的“最低旋转输出量”旋转（危险） @@ -6496,7 +6496,7 @@ Applies and Saves all settings to SD Output Channel Configuration - 输出通道配置 + 输出端口设置 @@ -6511,12 +6511,12 @@ Applies and Saves all settings to SD Output configuration - 输出配置 + 输出设置 Bank(Channels): - 输出端口： + 输出集： @@ -6546,7 +6546,7 @@ When using OneShot125 all values set in min/max and idle are divided by eight be Setup output mode. Use PWM or OneShot with Standard ESCs.\nSeveral other ESCs like BLHeli 13+ can use the more advanced OneShot125.\nWhen using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - 标准电调配置为PWM或OneShot模式。 + 标准电调配置为PWM或OneShot模式。 类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。 当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后再输出给电调 （例如：1000/8 = 125, 2000/8 = 250).。 @@ -6556,47 +6556,47 @@ When using OneShot125 all values set in min/max and idle are divided by eight be Form - 界面 + 界面 Link - + 关联 Channel Number - + 序号 Check to invert the channel. - + 勾选让电机反向旋转。 Neutral (slowest for motor) - + 最低旋转输出量 Assignment - + 别名 Min - + 最小值 Max - + 最大值 Output mode - + 输出模式 0: @@ -6605,44 +6605,46 @@ When using OneShot125 all values set in min/max and idle are divided by eight be Reversed - + 反转 - - + # - Bank - + # - 输出集 Minimum PWM value, beware of not overdriving your servo. Using OneShot125 a value of 1000(uS) here will produce a pulse of 125(uS). - + PWM最小值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。 +如果使用OneShot125模式，实际输出脉冲为该值的1/8，即设置值为1000uS，实际输出值为125uS. 0 - 0 + 0 Bank number - + 集序号 0 - + Maximum value, beware of not overdriving your servo. Using OneShot125 a value of 2000(uS) here will produce a pulse of 250(uS). - + PWM最大值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。 +如果使用OneShot125模式，实际输出脉冲值为该值的1/8，即设置值为1000uS，实际输出值为125uS. @@ -9029,7 +9031,7 @@ p, li { white-space: pre-wrap; } The X Quadcopter uses four motors and is the most common multi rotor configuration. Two of the motors rotate clockwise and two counter clockwise. The motors positioned diagonal to each other rotate in the same direction. This setup is perfect for sport flying and is also commonly used for FPV platforms. - X型四轴是目前最常见的一种多轴飞行器，非常适合于飞行竞赛和FPV。 + X型四轴是目前最常见的一种多轴飞行器，非常适合于飞行竞赛和第一视角飞行。 @@ -9039,7 +9041,7 @@ p, li { white-space: pre-wrap; } The Plus(+) Quadcopter uses four motors and is similar to the X Quadcopter but the forward direction is offset by 45 degrees. The motors front and rear rotate in clockwise and the motors right and left rotate counter-clockwise. This setup was one of the first to be used and is still used for sport flying. This configuration is not that well suited for FPV since the fore rotor tend to be in the way of the camera. - 十字型四轴飞行器类似于X型四轴，区别在于前进方向相差45度。十字型四轴前后两个电机顺时针旋转，左右两个电机逆时针旋转。由于正前方有电机阻挡，这种类型的四轴飞行器并不适合FPV。 + 十字型四轴飞行器类似于X型四轴，区别在于前进方向相差45度。十字型四轴前后两个电机顺时针旋转，左右两个电机逆时针旋转。由于正前方电机容易阻碍摄像机镜头，这种类型的四轴飞行器并不适合第一视角飞行。 @@ -9115,32 +9117,34 @@ Please select the type of multirotor you want to create a configuration for belo WizardPage - + Output calibration - + 电机输出校准 Start - + 开始 Stop - 停止 + 停止 The actuator module is in an error state. Please make sure the correct firmware version is used then restart the wizard and try again. If the problem persists please consult the openpilot.org support forum. - + 输出模块出错。 + +请确认设备上固件版本是否正确，然后重新启动设置向导。如果问题继续存在，请到openpilot.org官网论坛寻求进一步技术支持。 @@ -9152,7 +9156,16 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt; font-weight:600; color:#ff0000;">VERY IMPORTANT!</span><span style=" font-family:'Lucida Grande'; font-size:10pt;"><br /></span><span style=" font-family:'Lucida Grande'; font-size:10pt; font-weight:600; color:#ff0000;">REMOVE ALL PROPELLERS FROM THE VEHICLE BEFORE PROCEEDING!</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">Connect all components according to the illustration on the summary page, and provide power using an external power supply such as a battery before continuing.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">Depending on what vehicle you have selected, both the motors controlled by ESCs and/or servos controlled directly by the OpenPilot controller may have to be calibrated. The following steps will guide you safely through this process. </span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">现在开始对电机控制信号进行校准。It is now time to calibrate the output levels for the signals controlling your vehicle. </span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt; font-weight:600; color:#ff0000;">警告！</span><span style=" font-family:'Lucida Grande'; font-size:10pt;"><br /> +</span><span style=" font-family:'Lucida Grande'; font-size:10pt; font-weight:600; color:#ff0000;">在进行下一步操作之前，请先将所有螺旋桨从电机上移除！</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">按照示意图将航模所有部件连接好，插上动力电池。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">接下来的步骤中，设置向导将会安全的引导您为多轴飞行器的电机控制信号进行校准。</span></p> +</body></html> @@ -9162,7 +9175,16 @@ p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">In this step we will set the neutral rate for the motor highlighted in the illustration to the right. <br />Please pay attention to the details and in particular the motors position and its rotation direction. Ensure the motors are spinning in the correct direction as shown in the diagram. Swap any 2 motor wires to change the direction of a motor. </span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">To find </span><span style=" font-size:10pt; font-weight:600;">the neutral rate for this motor</span><span style=" font-size:10pt;">, press the Start button below and slide the slider to the right until the motor just starts to spin stable. <br /><br />When done press button again to stop.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">现在向导将引导您为右图中高亮显示的电机设置最低旋转输出量。 <br /> +请注意观察电机是否按照图中所示的顺时针或逆时针方向旋转。如若电机旋转方向和示意图中相反，请将三根电机输入线中的任意两根对调。 </span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">为了帮助您找到</span><span style=" font-size:10pt; font-weight:600;">该电机的最低旋转输出量</span><span style=" font-size:10pt;">, ，请点击下面的“开始”按钮，拖动滑动条直到电机开始低速稳定旋转。 <br /> + <br /> + 完成后请点击“停止”按钮。</span></p> +</body></html> @@ -9177,22 +9199,22 @@ p, li { white-space: pre-wrap; } Reverse - + 反向 Min - + 最小值 Center - + 中值 Max - + 最大值 @@ -9205,7 +9227,7 @@ p, li { white-space: pre-wrap; } Write configuration to controller - 保存配置 + 将设置信息写入到OpenPilot设备中 @@ -9234,7 +9256,15 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">The wizard is now ready to save the configuration directly to your OpenPilot controller. </span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If any of the selections made in this wizard require a reboot of the controller, then power cycling the OpenPilot controller board will have to be performed after you save in this step.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Press the Save button to save the configuration.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot设置保存</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导准备将设置信息写入到OpenPilot设备中。 </span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">保存结束后，OpenPilot设备可能会重启以激活某些设置项。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请点击下方“Save”按钮保存设置。</span></p> +</body></html> @@ -10050,7 +10080,7 @@ Do you still want to proceed? Arming Settings are now set to 'Always Disarmed' for your safety. - + 安全起见，在后续操作开始之前，飞行器强制进入锁定状态。 @@ -10060,7 +10090,7 @@ Do you still want to proceed? Next - + 下一项 @@ -10200,12 +10230,12 @@ Move the %1 stick. Next / Skip - + 下一项/忽略 Stop Manual Calibration - + 结束手动校准 @@ -10220,7 +10250,7 @@ Move the %1 stick. Start Manual Calibration - + 开始手动校准 @@ -12959,7 +12989,7 @@ The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRAN WizardPage - + @@ -12969,79 +12999,87 @@ p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Initial Tuning</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2,sans-serif'; font-size:10pt;">This section of the OpenPilot Wizard allows you to select a set of initial tuning parameters for your airframe. Presented below is a list of common airframe types, select the one that matches your airframe the closest, if unsure select the generic variant.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">预设稳态飞行参数</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2,sans-serif'; font-size:10pt;">OpenPilot根据目前流行的多轴飞行器提供了一系列机型的稳态飞行控制参数。请从下面列表中选取一个最接近你实际机型的飞行器，如果不确定，请选择以Generic开头的选项。</span></p> +</body></html> Information about the Vehicle in short. - + 机型简述。 Name of Vehicle: - + 机型： Name of Owner: - + 参数维护者： Size: - + 尺寸： Weight: - + 重量： Motor(s): - + 电机型号： ESC(s): - + 电调： Servo(s): - + 舵机： Battery: - + 电池： Propellers(s): - + 螺旋桨： Controller: - + 飞行控制器： Comments: - + 备注： This option will use the current tuning settings saved on the controller, if your controller is currently unconfigured, then the OpenPilot firmware defaults will be used. It is suggested that if this is a first time configuration of your controller, rather than use this option, instead select a tuning set that matches your own airframe as close as possible from the list above or if you are not able to fine one, then select the generic item from the list. - + 选择此项将会使用飞行控制器上已有的控制参数，首次使用的控制器将会使用固件内预设的默认参数。 + +首次投入使用的飞行控制器，建议不要选择此项设置，请尽可能从列表中选择一项最为接近的机型，或者选择以Generic开头的选项。 Current Tuning - + 维持现有参数 @@ -13049,7 +13087,7 @@ It is suggested that if this is a first time configuration of your controller, r WizardPage - + @@ -13060,33 +13098,41 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot Sensor Calibration Procedure</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">The wizard needs to get information from the controller to determine in which position the vehicle is normally considered to be level. To be able to successfully perform these measurements, you need to place the vehicle on a surface that is as flat and level as possible. Examples of such surfaces could be a table top or the floor. Be careful to ensure that the vehicle really is level, since this step will affect the accelerometer and gyro bias in the controller software.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To perform the calibration, please push the Calculate button and wait for the process to finish.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot传感器校准</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">在校准过程中需要获取足够数据以确定水平位置，作为航模判断是否水平的参考依据。为了能够获取到正确数据，请将您的航模放置到一个尽可能水平的平面上，如果可能，建议使用水平尺以确保航模水平摆放。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">准备就绪后，请点击下方”Calculate“按钮开始校准，并耐心等待直到校准完成。</span></p> +</body></html> Calculate gyro and accelerometer bias - + 计算陀螺仪和加速度传感器误差并确定航模水平参考值 Calculate - + 计算 An OpenPilot controller must be connected to your computer to perform bias calculations. Please connect your OpenPilot controller to your computer and try again. - + 未检测到OpenPilot设备。 +请确保设备和电脑已经连接，然后重新尝试。 Retrieving data... - + 正在获取传感器数据... <font color='green'>Done!</font> - + <font color='green'>完成！</font> @@ -13094,7 +13140,7 @@ Please connect your OpenPilot controller to your computer and try again. WizardPage - + @@ -13107,47 +13153,56 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">This part of the wizard will tell you to connect the battery to your aircraft, before doing so you absolutely </span><span style=" font-size:10pt; font-weight:600; color:#f30f1d;">must remove the propellers from all motors</span><span style=" font-size:10pt;">. </span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">The steps to perform this calibration are as follows:</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">1.</span><span style=" font-size:10pt;"> Confirm all safety questions,<br /></span><span style=" font-size:10pt; font-weight:600;">2.</span><span style=" font-size:10pt;"> Press the Start button when it becomes enabled, </span><span style=" font-size:10pt; font-weight:600;">battery not connected</span><span style=" font-size:10pt;">,<br /></span><span style=" font-size:10pt; font-weight:600;">3.</span><span style=" font-size:10pt;"> Connect the battery to your airframe,<br /></span><span style=" font-size:10pt; font-weight:600;">4.</span><span style=" font-size:10pt;"> Wait for ESC calibration beep(s),<br /></span><span style=" font-size:10pt; font-weight:600;">5.</span><span style=" font-size:10pt;"> Press the Stop button,<br /></span><span style=" font-size:10pt; font-weight:600;">6.</span><span style=" font-size:10pt;"> Wait for ESC confirmation beep(s),<br /></span><span style=" font-size:10pt; font-weight:600;">7.</span><span style=" font-size:10pt;"> Disconnect battery.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:12pt; font-weight:600;">OpenPilot电调校准</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">电子调速器（ESC），特别是航空模型使用的无刷电机电子调速器，首次使用之前或更换遥控器以后，必须通过校准来学习最大及最小油门行程量。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">在电调校准过程中，向导会提示您给航模接上动力电池，在上电之前，请<span style=" font-size:10pt; font-weight:600; color:#f30f1d;">务必从电机上卸除所有螺旋桨</span>。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">整个校准过程分为以下几个步骤：</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt; font-weight:600;">1、</span><span style=" font-size:10pt;">确认所有安全须知；<br /> +</span><span style=" font-size:10pt; font-weight:600;">2、</span><span style=" font-size:10pt;">点击“开始”按钮，</span><span style=" font-size:10pt; font-weight:600;">此时电池尚未连接</span><span style=" font-size:10pt;">；<br /></span><span style=" font-size:10pt; font-weight:600;">3、</span><span style=" font-size:10pt;">接上电池；<br /></span><span style=" font-size:10pt; font-weight:600;">4、</span><span style=" font-size:10pt;">等待电调通过电机发出的校准提示音；<br /></span><span style=" font-size:10pt; font-weight:600;">5、</span><span style=" font-size:10pt;">点击停止按钮；<br /></span><span style=" font-size:10pt; font-weight:600;">6、</span><span style=" font-size:10pt;">等待校准确认提示音；<br /></span><span style=" font-size:10pt; font-weight:600;">7、</span><span style=" font-size:10pt;">断开电池。</span></p></body></html> I have removed ALL propellers from ALL motors of my vehicle. - + 已经将所有螺旋桨从电机上拆除。 The vehicle is NOT powered by any external power source but USB - + 除USB以外，没有外接电池供电 I confirm i have read and understood the above instructions in full - + 已经全部阅读并理解上述所有内容及安全注意事项 Low/Off - + 油门最低行程 N/A - N/A + N/A High - + 油门最高行程 Start - + 开始 Stop - 停止 + 停止 @@ -13156,7 +13211,7 @@ p, li { white-space: pre-wrap; } %1 µs - + @@ -13180,8 +13235,8 @@ p, li { white-space: pre-wrap; } p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">OpenPilot输出信号设置</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">为了更好的给电机输出控制信号，系统需要知道电子速度控制器（电调）的类型。</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请在下方选择电调类型。如果你不确定，请保持默认选项，点击下一步继续操作。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">为了更好的给电机输出控制信号，系统需要知道电子调速器的类型。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请在下方选择电调类型，如果不确定，请保持默认选项，点击下一步继续操作。</span></p> </body></html> @@ -13197,7 +13252,8 @@ p, li { white-space: pre-wrap; } Turbo PWM ESC 400Hz - 490Hz PWM高速电调 + 400 or 490？ + 490Hz PWM高速电调 @@ -13210,18 +13266,18 @@ p, li { white-space: pre-wrap; } WizardPage - + Go to Input Wizard... - + 进入遥控器设置向导... Unable to open Input Wizard since the Config Plugin is not loaded in the current workspace. - + 因为配置插件没有加载，无法启动遥控器设置向导。 @@ -13233,7 +13289,14 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Setup wizard is completed.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">This part of the setup procedure is now complete and you are one step away from completing the setup of your OpenPilot controller.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To complete the setup please click the button below to close this wizard and go directly to the Transmitter Setup Wizard.</span></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">Congratulations!</span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">基本设置已经结束。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">目前我们已经完成OpenPilot设备必需的所有基础设置，您还差一步即可完成整个航模设置。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请点击下方按钮进入遥控器设置向导。</span></p></body></html> @@ -13259,7 +13322,7 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Disregarding this warning puts you at</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600; color:#000000;"> risk of injury</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">!</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Now that your props are removed we can get started. Ready?</span></p></body></html> - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> @@ -13271,7 +13334,7 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">警告：请确认在进行下一步操作之前 </span></p> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">所有螺旋桨已经被从模型上安全拆卸</span>!</span></p> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">请不要忽略该警告，否则会有受伤风险！</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">安全起见，请不要忽略该警告！</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">准备好了吗？请点击“下一步”开始。</span></p> </body></html> From a9676d33118aac31ad0949c6ab5e5cb4a7ed64cc Mon Sep 17 00:00:00 2001 From: samguns Date: Mon, 23 Feb 2015 22:17:02 +0800 Subject: [PATCH 08/12] It seems OK for a first version of CN translation. --- .../translations/openpilotgcs_zh_CN.ts | 542 ++++++++++-------- 1 file changed, 303 insertions(+), 239 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index 8378c7d7f..6ace5a7fb 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -160,7 +160,7 @@ Save &GCS Default Settings - 保存 &GCS 默认配置 + 保存&GCS默认配置 @@ -227,7 +227,7 @@ Edit Gadgets Mode - + 工作区编辑模式 @@ -267,7 +267,7 @@ Close Current View - 关闭当前子窗口 + 关闭当前子窗口 @@ -277,7 +277,7 @@ Close All Other Views - 关闭其它所有子窗口 + 关闭其它所有工作区 @@ -1557,7 +1557,7 @@ under the level where the motor starts to undershoot its target speed when decelerating. Do it after accel time is setup. - 调节时请从0开始缓慢增加减速时间，直到电机转速刚好下降到低于减速的目标速度 + 调节时请从0开始缓慢增加减速时间，直到电机转速刚好下降到低于减速的目标速度 设置好加速时间常量后再执行此设置。 @@ -1567,34 +1567,35 @@ Do it after accel time is setup. When tuning: Slowly raise accel time from zero to just under the level where the motor starts to overshoot its target speed. - 单位：毫秒(ms) + 单位：毫秒(ms) 调节时请从0开始缓慢增加加速时间，直到电机转速刚好上升到高于目标速度。 1000 - 1000 + 1000 Overall level of feed forward (in percentage). - 前馈整体水平（百分比）。 + 前馈整体比重（百分比）。 Limits how much the engines can accelerate or decelerate. In 'units per second', a sound default is 1000. - + 限制引擎最大加速或减速量。 +单位/秒，通常设置1000。 MaxAccel - + 最大加速/减速量 000 - 000 + @@ -1614,7 +1615,7 @@ p, li { white-space: pre-wrap; } Enable FF tuning - 开启前馈参数调节 + 开启前馈参数调节 @@ -1624,7 +1625,7 @@ p, li { white-space: pre-wrap; } Send to board, but don't save permanently (flash or SD). - 发送到控制板，但不保存到flash或SD卡 + 发送到控制板，但不保存。 @@ -1634,7 +1635,7 @@ p, li { white-space: pre-wrap; } Applies and Saves all settings to flash or SD depending on board. - + 发送配置到控制板并保存。 @@ -1681,7 +1682,7 @@ p, li { white-space: pre-wrap; } <p align="center" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-size:14pt; font-weight:600; color:#ff0000;">配置前馈需特别注意</span></p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> -<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">由于前馈控制本身局限存在极大不稳定性，目前已经极少被人使用了。此设置页内容也将在后续版本中去除，我们建议您不要做任何前馈调节设置。</span></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">警告：前馈调节会把所有电机打开到中等油门量。</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:13pt;">开始调节前，请确保你已经将螺旋桨移除，并且整个机架已经被安全固定好。我们建议您佩戴好护目镜，采取必要措施保护好脸和身体。</span></p></td></tr></table></body></html> @@ -5461,7 +5462,7 @@ The same value is used for all axes. Send to OpenPilot but don't write in SD. Beware of not locking yourself out! - 发送配置到OpenPilot控制板，但不保存到SD卡。 + 发送配置到OpenPilot控制板，但不保存。 断电后配置将消失！ @@ -5473,7 +5474,7 @@ Beware of not locking yourself out! Applies and Saves all settings to SD. Beware of not locking yourself out! - 发送配置到控制板，并保存到SD卡。 + 发送配置到控制板并保存 @@ -5491,64 +5492,66 @@ Beware of not locking yourself out! Form - 界面 + 界面 Attitude - + 姿态 Rotate virtual attitude relative to board - + 该功能可以让飞控板不必严格按照板子上的方向来安装，最好原生界面提供更多帮助性解释 + 飞行控制板与真实飞行姿态相对旋转角度 Roll - + 横滚 Yaw - + 方向 Pitch - + 俯仰 Calibration - + 水平校准 Place aircraft very flat, and then click level to compute the accelerometer and gyro bias - + 请将您的航模放置到一个尽可能水平的平面上，如果可能，建议使用水平尺以确保航模水平摆放，然后请点击“校准”按钮并耐心等待直到校准完成 Launch horizontal calibration. - + 启动水平校准。 Level - + 校准 If enabled, a fast recalibration of gyro zero point will be done whenever the frame is armed. Do not move the airframe while arming it in that case! - + 每次解锁航模时，控制器以解锁时摆放状态做一次快速水平校准。 +打开此项设置后，请务必保证每次解锁时候航模静止放置！ Zero gyros while arming aircraft - + 每次解锁时，水平参考值归零 @@ -5562,37 +5565,44 @@ Range: 0.00 - 0.20, Good starting value: 0.05 - 0.10 Start low and raise until drift stops. A setting of 0.00 disables the filter. - + 加速度传感器阙值。 + +过滤加速度传感器偏移误差。 +设置适当的阙值可以有效过滤传感器偏移误差，提升飞行器自稳性能。 + +范围：0.00到0.20，通常设置在0.05至0.10区间比较好 + +设定0.00关闭该功能。 Takes you to the wiki page - + 点击打开wiki知识库 Apply - 应用 + 应用 Click to permanently save the accel bias in the CopterControl Flash. - + 发送配置到控制板并保存。 Save - 保存 + 保存 Filtering - + 低通过滤 Accelerometers - + 加速度传感器 @@ -5883,7 +5893,7 @@ A setting of 0.00 disables the filter. Form - 界面 + 界面 @@ -5895,7 +5905,14 @@ p, li { white-space: pre-wrap; } <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt; font-weight:600;"><br /></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">This panel will be updated to provide the relevant controls to let you calibrate your OpenPilot unit, depending on the board which is detected once telemetry is connected and running.</span></p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt;"><br /></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt; font-weight:600;">姿态校准</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt; font-weight:600;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">当前未检测到任何OpenPilot设备，请将设备通过管理端口与GCS连接后开始进行校准。</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt;"><br /></p></body></html> @@ -5903,7 +5920,7 @@ p, li { white-space: pre-wrap; } Form - 界面 + 界面 @@ -5915,7 +5932,14 @@ p, li { white-space: pre-wrap; } <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt; font-weight:600;"><br /></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">This panel will be updated to provide the relevant controls to let you configure your hardware once telemetry is connected and running.</span></p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt;"><br /></p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt; font-weight:600;">硬件设置</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt; font-weight:600;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Ubuntu'; font-size:11pt;">当前未检测到任何OpenPilot设备，请将设备通过管理端口与GCS连接。</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Ubuntu'; font-size:11pt;"><br /></p></body></html> @@ -5943,12 +5967,12 @@ p, li { white-space: pre-wrap; } Back - 上一项 + 上一步 Next - 下一项 + 下一步 @@ -6077,7 +6101,8 @@ Set to 0 to disable (recommended for soaring fixed wings). Airframe disarm is done by throttle off and opposite of above combination. - 油门关闭与上面相反的操作来锁定飞行器。 + 油门关闭与上面相反的操作来锁定飞行器。 +假设解锁设置为油门关闭和Yaw Right，那么上锁设置即为油门关闭和Yaw Left。 @@ -6088,8 +6113,8 @@ Set to 0 to disable (recommended for soaring fixed wings). Send to OpenPilot but don't write in SD. Be sure to set the Neutral position on all sliders before sending! - 发送配置到OpenPilot控制板，但不保存到SD卡。 -并确保遥控器上所有拨杆都放置在中间位置！ + 发送配置到OpenPilot控制板，但不保存。 +确保所有电机的怠速输出量已经设置好！ @@ -6100,8 +6125,8 @@ Be sure to set the Neutral position on all sliders before sending! Be sure to set the Neutral position on all sliders before sending! Applies and Saves all settings to SD - 发送配置到控制板，并保存到SD卡。 -并确保遥控器上所有拨杆都放置在中间位置！ + 发送配置到控制板并保存。 +并确保遥控器上所有拨杆都放置在中间位置 @@ -6121,38 +6146,37 @@ Applies and Saves all settings to SD Thrust - 不确定是什么概念，暂时用强推 强推 Stabilized 1 - 稳定模式 1 + Stabilized 2 - 稳定模式 2 + Stabilized 3 - 稳定模式 3 + Stabilized 4 - 稳定模式 4 + Stabilized 5 - 稳定模式 5 + Stabilized 6 - 稳定模式 6 + @@ -6162,7 +6186,7 @@ Applies and Saves all settings to SD Settings Bank - 设置槽 + 稳定参数 @@ -6187,57 +6211,57 @@ Applies and Saves all settings to SD objname:StabilizationSettings - + fieldname:FlightModeMap - + index:0 - + haslimits:no - + scale:1 - + buttongroup:16 - + index:1 - + index:2 - + index:3 - + index:4 - + index:5 - + @@ -6267,12 +6291,12 @@ Applies and Saves all settings to SD <html><head/><body><p>Assisted Control options augment the primary flight mode. GPSAssist adds brake/hold to Stabilization and PositionHold.</p></body></html> - <html><head/><body><p>辅助控制选项可有效增强该飞行模式。 GPS辅助提供了定点/定高稳定悬停功能。</p></body></html> + <html><head/><body><p>辅助控制选项可有效增强该飞行模式。 GPS辅助提供定点/定高稳定悬停功能。</p></body></html> fieldname:FlightModeAssistMap - + @@ -6280,107 +6304,107 @@ Applies and Saves all settings to SD MixerCurve - + Throttle Curve - + 油门曲线 Max - + 最大值 4 - 4 + 4 3 - 3 + 3 2 - 2 + 2 Min - + 最小值 Value - 值 + 数值 1.0 - 1.0 + 1.0 .75 - + .50 - + .25 - + .00 - + Linear - + Log - + Exp - + Flat - + Step - + 步进值 Generate - + 生成 Reset - 重置 + 重置 Advanced... - + 高级... @@ -6443,17 +6467,17 @@ Applies and Saves all settings to SD Motors spin at neutral output when armed and throttle below zero (be careful) - 解锁后且油门关闭时，电机开始按照上方设定的“最低旋转输出量”旋转（危险） + 解锁后且油门关闭时，电机开始以设定的“怠速”旋转（危险） Move the servos using the sliders. Two important things: - Take extra care if the output is connected to an motor controller! - Will only work if the RC receiver is working (failsafe) - 拖动滑动杆来测试伺服电机转动。 + Will only work这句不太确定，暂不直接翻译 + 拖动滑动杆使电机转动。 注意事项： -- 格外注意电机输出是否连接了电调！ -- 当且仅当遥控器正常时才工作(失控保护） +- 格外注意电机是否连接了电调 @@ -6469,8 +6493,8 @@ Applies and Saves all settings to SD Send to OpenPilot but don't write in SD. Be sure to set the Neutral position on all sliders before sending! - 发送配置到OpenPilot控制板，但不保存到SD卡。 -并确保遥控器上所有拨杆都放置在中间位置！ + 发送配置到OpenPilot控制板，但不保存。 +确保所有电机的怠速输出量已经设置好！ @@ -6481,8 +6505,8 @@ Be sure to set the Neutral position on all sliders before sending! Be sure to set the Neutral position on all sliders before sending! Applies and Saves all settings to SD - 发送配置到控制板，并保存到SD卡。 -并确保遥控器上所有拨杆都放置在中间位置！ + 发送配置到控制板并保存。 +确保所有电机的怠速输出量已经设置好 @@ -6576,7 +6600,7 @@ When using OneShot125 all values set in min/max and idle are divided by eight be Neutral (slowest for motor) - 最低旋转输出量 + 怠速（电机最低速稳定旋转） @@ -8793,7 +8817,7 @@ only when system is armed without disabling the module. Uploading firmware. - 烧写固件。 + 正在烧写固件。 @@ -8840,7 +8864,7 @@ p, li { white-space: pre-wrap; } p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">更新固件</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">请确保固件和当前运行的控制站（GCS）版本一一对应</span>。</p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">请确保固件和当前运行的地面站（GCS）版本一一对应</span>。</p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">当设备准备好后，点击下面Upgrade按钮开始升级，整个过程中请勿断电。</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">由于继续使用原有固件系统下的设置<strong>可能会造成无法预料的灾难性后果</strong>，强烈建议更新固件的同时清除原有设置信息。</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"></span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">你也可以取消勾选“清除所有设置”，保留原有配置，只升级固件。</span></p> @@ -9104,7 +9128,7 @@ Please select the type of multirotor you want to create a configuration for belo WizardPage - + @@ -9160,7 +9184,7 @@ p, li { white-space: pre-wrap; } <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">现在开始对电机控制信号进行校准。It is now time to calibrate the output levels for the signals controlling your vehicle. </span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">现在开始对电机控制信号进行校准。</span></p> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt; font-weight:600; color:#ff0000;">警告！</span><span style=" font-family:'Lucida Grande'; font-size:10pt;"><br /> </span><span style=" font-family:'Lucida Grande'; font-size:10pt; font-weight:600; color:#ff0000;">在进行下一步操作之前，请先将所有螺旋桨从电机上移除！</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Lucida Grande'; font-size:10pt;">按照示意图将航模所有部件连接好，插上动力电池。</span></p> @@ -9179,11 +9203,11 @@ p, li { white-space: pre-wrap; } <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">现在向导将引导您为右图中高亮显示的电机设置最低旋转输出量。 <br /> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">现在向导将引导您为右图中高亮显示的电机设置怠速输出量。 <br /> 请注意观察电机是否按照图中所示的顺时针或逆时针方向旋转。如若电机旋转方向和示意图中相反，请将三根电机输入线中的任意两根对调。 </span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">为了帮助您找到</span><span style=" font-size:10pt; font-weight:600;">该电机的最低旋转输出量</span><span style=" font-size:10pt;">, ，请点击下面的“开始”按钮，拖动滑动条直到电机开始低速稳定旋转。 <br /> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">为了帮助您找到</span><span style=" font-size:10pt; font-weight:600;">该电机的怠速点</span><span style=" font-size:10pt;">，请点击下面的“开始”按钮，拖动滑动条直到电机开始以最低速稳定旋转。 <br /> <br /> - 完成后请点击“停止”按钮。</span></p> +完成后请点击“停止”按钮。</span></p> </body></html> @@ -9305,7 +9329,7 @@ p, li { white-space: pre-wrap; } WizardPage - + @@ -9810,7 +9834,7 @@ halting a running board. ... - + @@ -9820,12 +9844,14 @@ halting a running board. Mainboard - + 提示 <html><head/><body><p>Reboot the board and clear its settings memory.</p><p> Useful if the board cannot boot properly.</p><p> Blue led starts blinking quick for 20-30 seconds than the board will start normally</p><p><br/></p><p>If telemetry is not running, select the link using the dropdown</p><p>menu on the right.</p><p>PLEASE NOTE: Supported with bootloader versions 4.0 and later</p></body></html> - + <html><head/><body><p>清除所有设置并重启设备。</p> +<p> 当设备无法正常启动时候，请尝试使用此功能。</p> +<p> 蓝色LED快速闪烁20到30秒后设备将正常启动</p><p><br/></p><p>如果管理连接尚未建立，请从右边下拉菜单选择一项正确的连接方式。</p><p>注意：此功能要求Bootloader版本不低于4.0</p></body></html> @@ -9845,22 +9871,32 @@ halting a running board. <html><head/><body><p>Automatic firmware upgrade.</p><p>This <span style=" font-weight:600; color:#e21111;">will erase ALL settings</span> in the board. Please<br/>backup settings before using this if you want to<br/>be able to retain them.</p><p>This can be done with board already connected<br/>or by connecting board after button is clicked.<br/>Running upgrade with a connected board works <br/>for all boards <span style=" font-weight:600;">except OPLink</span> that needs to be <br/>connected after the button is clicked.</p></body></html> - + <html><head/><body> +<p>升级固件，并<span style=" font-weight:600; color:#e21111;">清除所有设置</span>。如果你稍后<br/> + 还需要使用当前配置，请在执行该命令前<br/> + 将配置备份保存。</p> +<p>从15.01开始，<span style=" font-weight:600;">除OPLink设备外</span>，执行此命<br/> + 令时可以是设备已经连接好，或者执行命令后<br/> + 再连接设备。（OPLink必须先点击按钮，再连接设备）<br/> + </p></body></html> Upgrade && Erase - 升级固件并清除设置 + 固件升级并清除设置 <html><head/><body><p>Automatic firmware upgrade. </p><p>This can be done with board already connected<br/>or by connecting board after button is clicked.<br/>Running upgrade with a connected board works <br/>for all boards <span style=" font-weight:600;">except OPLink</span> that needs to be <br/>connected after the button is clicked.</p></body></html> - + <html><head/><body><p>升级固件。</p><p>从15.01开始，<span style=" font-weight:600;">除OPLink设备外</span>，执行此命<br/> + 令时可以是设备已经连接好，或者执行命令后<br/> + 再连接设备。（OPLink必须先点击按钮，再连接设备）<br/> + </p></body></html> Upgrade - 升级固件 + 固件升级 @@ -9878,7 +9914,17 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- You will get a list of devices.</p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- You can then upload/download to/from each board as you wish</p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- You can resume operations by pressing &quot;Boot&quot;</p></body></html> - + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">请按照下列步骤升级固件或者升级固件并清除设置：</p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- 连接管理端口；</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- 当系统识别到设备后，点击上面&quot;终止系统&quot;按钮；</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- 你将会看到一份设备列表清单；</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- 你可以将固件烧写到设备中，也可以将设备上的固件备份到电脑里；</p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">- 操作结束后，请点击&quot;启动系统&quot;。</p></body></html> @@ -9887,7 +9933,7 @@ p, li { white-space: pre-wrap; } p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;"> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html> - + @@ -10048,7 +10094,7 @@ p, li { white-space: pre-wrap; } Calibration timed out before receiving required updates. - + 无法获取数据，校准等待超时 @@ -10061,13 +10107,13 @@ p, li { white-space: pre-wrap; } Unsaved changes - + 设置为保存 The tab you are leaving has unsaved changes,if you proceed they will be lost. Do you still want to proceed? - + 您尚未保存设置，请确认是否需要继续？ @@ -10075,22 +10121,22 @@ Do you still want to proceed? http://wiki.openpilot.org/x/04Cf - + Arming Settings are now set to 'Always Disarmed' for your safety. - 安全起见，在后续操作开始之前，飞行器强制进入锁定状态。 + 安全起见，在后续操作开始之前，飞行器强制进入永久锁定状态。 You will have to reconfigure the arming settings manually when the wizard is finished. After the last step of the wizard you will be taken to the Arming Settings screen. - + 在设置向导结束以后会停留在“解锁设置”选项页，请务必修改飞行器解锁方式。 Next - 下一项 + 下一步 @@ -10101,22 +10147,27 @@ Make sure you already configured your hardware settings on the proper tab and re You can press 'back' at any time to return to the previous screen or press 'Cancel' to quit the wizard. - + 欢迎使用遥控输入设置向导。 + +请按照屏幕上提示的指令操作遥控器。 + +设置过程中你可以随时点击“上一步”返回上一设置界面，也可以点击“取消”退出设置向导。 + Please choose your transmitter type: - + 请选择遥控类型： Acro: normal transmitter for fixed-wing or quad - + Acro：固定翼和多轴飞行器 Helicopter: has collective pitch and throttle input - + Helicopter：直升机（油门和俯仰混控） @@ -10126,7 +10177,7 @@ You can press 'back' at any time to return to the previous screen or p Please choose your transmitter mode: - + 请选择遥控器模式： @@ -10151,53 +10202,59 @@ You can press 'back' at any time to return to the previous screen or p Mode 1: Elevator and Rudder on the left, Throttle and Ailerons on the right - + 模式1：左手控制升降舵和方向舵，右手控制油门和副翼 Mode 2: Throttle and Rudder on the left, Elevator and Ailerons on the right - + 模式2：左手控制油门和方向舵，右手控制升降舵和副翼 Mode 3: Elevator and Ailerons on the left, Throttle and Rudder on the right - + 模式3：左手控制升降舵和副翼，右手控制油门和方向舵 Mode 4: Throttle and Ailerons on the left, Elevator and Rudder on the right - + 模式4：左手控制油门和副翼，右手控制升降舵和方向舵 For a Quad: Elevator is Pitch, Ailerons are Roll, and Rudder is Yaw. - + 对于多轴飞行器，升降舵相当于俯仰，副翼相当于横滚。 Please center all controls and trims and press Next when ready. If your FlightMode switch has only two positions, leave it in either position. - + 请将所有摇杆和控制钮放置在中间位置。 + +如果您的飞行模式按钮只有两个档位，请放置在任意一个档位上。 Please move all controls to their maximum extents on both directions. Press Next when ready. - + 请拨动所有摇杆和控制钮，移动范围涵盖它们的最大行程空间。 + +完成后请点击“下一步”继续。 Please check the picture below and correct all the sticks which show an inverted movement. Press Next when ready. - + 拨动摇杆并观察图中显示的移动方向，如果需要，请勾选下方对应选框设置逆转，完成后请点击“下一步”继续。 You have completed this wizard, please check below if the picture mimics your sticks movement. IMPORTANT: These new settings have not been saved to the board yet. After pressing Next you will go to the Arming Settings tab where you can set your desired arming sequence and save the configuration. - + 遥控器校准结束，请拨动遥控器摇杆和控制钮，观察下方动画与操作是否完全一致。 + +注意：遥控器校准结果尚未保存，请点击“下一步”进入“解锁设置”页，将解锁动作设置好以后，再点击”保存“按钮将所有遥控器输入设置信息保存。 @@ -10211,7 +10268,9 @@ Move the Collective Pitch stick. Please toggle the Flight Mode switch. For switches you may have to repeat this rapidly. - + 请拨动飞行模式控制开关。 + +您可能需要重复拨动开关数次。 @@ -10225,12 +10284,14 @@ Move the Throttle stick. Please move each control one at a time according to the instructions and picture below. Move the %1 stick. - + 请根据下面指令和图中动画所示方向拨动摇杆或控制钮。 + +拨动%1。 Next / Skip - 下一项/忽略 + 下一步/忽略 @@ -10240,12 +10301,12 @@ Move the %1 stick. <p>Arming Settings are now set to 'Always Disarmed' for your safety.</p><p>Be sure your receiver is powered with an external source and Transmitter is on.</p><p align='center'><b>Stop Manual Calibration</b> when done</p> - + <p>安全起见，在后续操作开始之前，飞行器强制进入永久锁定状态。</p><p>请确认遥控器发射机和接收器已经打开。</p><p align='center'>完成手动校准后，请点击<b>结束手动校准</b></p> You will have to reconfigure the arming settings manually when the manual calibration is finished. - + 手动校准结束后，请打开“解锁设置”选项页设置飞行器解锁动作。 @@ -10255,7 +10316,7 @@ Move the %1 stick. Alternatively, click Next to skip this channel. - + 你也可以点击“下一步/忽略”跳过这一步。 @@ -10337,7 +10398,7 @@ Move the %1 stick. GCS Settings Import/Export... - + 导入/导出GCS设置... @@ -10374,28 +10435,28 @@ Move the %1 stick. Start Log - + 日志记录 OP-%0.opl - + OpenPilot Log (*.opl) - + OpenPilot日志文件(*.opl) Stop logging - + 停止记录日志 Start logging... - + 开始记录日志... @@ -10990,103 +11051,103 @@ Move the %1 stick. Export UAV Settings... - + 导出UAV设置... Import UAV Settings... - + 导入UAV设置... Export UAV Data... - + 导出UAV数据... UAVObjects XML files (*.uav);; XML files (*.xml) - + Import UAV Settings - + 导入UAV设置 File Parsing Failed. - + 文件解析失败。 This file is not a correct XML file - + 无效的XML文件 Wrong file contents - + 文件内容错误 This file does not contain correct UAVSettings - + 文件包含错误的UAV设置 UAVObjects XML files (*.uav) - + Save UAVSettings File As - + 另存UAV设置为 UAV Settings Export - + 导出UAV设置 Unable to save settings: - + 无法保存文件： Settings saved. - + 设置保存成功。 Are you sure? - + 确定？ This option is only useful for passing your current system data to the technical support staff. Do you really want to export? - + 此功能只适用于将系统数据导出给技术支持人员查阅，确定继续导出？ Save UAVData File As - + 另存UAV数据为 UAV Data Export - + 导出UAV数据 Unable to save data: - + 无法保存文件： Data saved. - + 文件保存成功。 @@ -11947,140 +12008,143 @@ The board will be restarted and all settings erased. Form - 界面 + 界面 Airframe - + 飞行器 Throttle Curve - + 油门曲线 Mix Level - + 混控比重 Roll - + 横滚 Weight of Roll mixing in percent. Typical values are 100% for + configuration and 50% for X configuration on quads - + 横滚控制量权重 +十字型四轴飞行器通常设为100%，而X型则使用50% 50 - 50 + 50 Pitch - + 俯仰 Weight of Pitch mixing in percent. Typical values are 100% for + configuration and 50% for X configuration on quads. - + 俯仰控制量权重 +十字型四轴飞行器通常设为100%，而X型则使用50%。 Yaw - + 方向 Weight of Yaw mixing in percent. Typical value is 50% for + or X configuration on quads. - + 方向控制量权重 +十字型和X型四轴飞行器通常都设为50%。 Airframe Type: - + 飞行器类型： Select the Multirotor frame type - + 选择飞行器类型 Mixer OK - + Motor output channels - + 电机通道 1 - 1 + 1 Assign your motor output channels using the drawing above as a reference. Respect propeller rotation. - + 请参照上面示意图为每个电机分配通道序号，并确保旋转方向一致。 2 - 2 + 2 3 - 3 + 3 4 - 4 + 4 5 - 5 + 5 6 - 6 + 6 7 - 7 + 7 8 - 8 + 8 Multirotor Motor Direction - + 电机旋转方向 Tricopter Yaw Servo channel - + 三轴飞行器伺服舵机 Reverse all motors - + 所有电机反转 @@ -12243,22 +12307,22 @@ Beware of not locking yourself out! Form - 界面 + 界面 Channel number - + 通道序号 Number - + 通道 Text - + @@ -12275,27 +12339,27 @@ even lead to crash. Use with caution. Channel function - + 通道功能 Function - + 功能 Channel values are inverted - + 通道逆转 Reversed - + 逆转 Response time - + 响应时间 @@ -12305,57 +12369,57 @@ even lead to crash. Use with caution. Channel max - + 通道最大值 Max - + 最大值 Channel neutral - + 通道中值 Neutral - + 中值 Channel min - + 通道最小值 Min - + 最小值 Channel type - + 通道类型 Type - + 类型 Chan %1 - + 通道%1 Channel value - + 当前通道值 Channel Value - + 通道值 @@ -12711,33 +12775,33 @@ even lead to crash. Use with caution. OpenPilot Ground Control Station - + OpenPilot地面控制站 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. - + Contributors - + Ok - + 确定 About OpenPilot - + 关于OpenPilot Revision: <b>%1</b><br/>UAVO Hash: <b>%2</b><br/><br/>Built from %3<br/>Built on %4 at %5<br/>Based on Qt %6 (%7 bit)<br/><br/>&copy; %8, 2010-%9. All rights reserved.<br/> - + @@ -13327,12 +13391,12 @@ p, li { white-space: pre-wrap; } p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600;">欢迎使用OpenPilot设置向导</span><img src=":/setupwizard/resources/wizard.png" style="float: right;" /></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导将带领您完成首次使用OpenPilot控制器所需的所有基本步骤。您可能会被询问一系列问题用于设置首次飞行所需的必要参数。</span></p> -<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导并不涵盖所有设置内容，您可以在完成设置向导以后进入“设置”界面进行其它功能的配置。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导将帮助您完成首次使用OpenPilot控制器所需的所有基本步骤。您会被询问一系列问题用于设置首次飞行所需的必要参数。</span></p> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">设置向导并不涵盖所有设置内容，您可以在完成设置向导以后进入“Configuration”界面进行其它功能的配置。</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">警告：请确认在进行下一步操作之前 </span></p> -<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">所有螺旋桨已经被从模型上安全拆卸</span>!</span></p> +<p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;"><span style="font-family:'MS Shell Dlg 2'; font-size:12pt; font-weight:600; color:#ff0000;">所有螺旋桨已经从模型上安全拆卸</span>!</span></p> <p align="center" style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">安全起见，请不要忽略该警告！</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style="font-family:'MS Shell Dlg 2'; font-size:10pt;">准备好了吗？请点击“下一步”开始。</span></p> @@ -13425,7 +13489,7 @@ p, li { white-space: pre-wrap; } Vehicle Template Export - + 导出模型 @@ -13793,17 +13857,17 @@ Please try again. The OpenPilot Project - All Rights Reserved - + GCS Revision - - + Loading - + 正在加载 @@ -13811,7 +13875,7 @@ Please try again. Application starting... - + 正在启动中... @@ -14087,12 +14151,12 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic Config - + Transmitter Setup Wizard - + 遥控器设置向导 @@ -14105,7 +14169,7 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic This option will start your motors by the amount selected on the sliders regardless of transmitter.It is recommended to remove any blades from motors. Are you sure you want to do this? - + 打开此功能将会使用界面中的滑动条来替代遥控器的油门摇杆。强烈建议您在操作之前卸除螺旋桨。确定使用此功能吗？ @@ -14243,32 +14307,32 @@ not only the ones visible on screen. Multirotor - + 多轴飞行器 Fixed Wing - + 固定翼飞机 Helicopter - + 直升机 Ground - + 车模 Custom - + 自定义 http://wiki.openpilot.org/x/44Cf - + @@ -14559,7 +14623,7 @@ Double click legend or plot to show/hide legend. Calibration timed out before receiving required updates. - + 无法获取数据，校准等待超时 From d994c5a2ea4b89f0e8da611404e0a3a42fe76d43 Mon Sep 17 00:00:00 2001 From: samguns Date: Tue, 24 Feb 2015 12:33:52 +0800 Subject: [PATCH 09/12] Merge 15.02 and add more translations. Now it's ready to merge to next GCS release. --- .../translations/openpilotgcs_zh_CN.ts | 569 ++++++++++-------- 1 file changed, 322 insertions(+), 247 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts index 6ace5a7fb..40450ef19 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_zh_CN.ts @@ -287,7 +287,7 @@ Goto Next View - 跳转到下一个子窗口 + 跳转到下一视图 @@ -492,12 +492,12 @@ The name must not contain any of the characters '%1'. - 名称不能包含 '%1' 中的任何一个字符 + 名称不能包含'%1'中的任何一个字符。 The name must not contain '%1'. - 名称不能包含 '%1' + 名称不能包含'%1'。 @@ -1014,12 +1014,12 @@ Reason: %3 Plugin Details of %1 - 插件%1 的详细信息 + 插件%1的详细信息 Plugin Errors of %1 - 插件 %1 的错误信息 + 插件%1的错误信息 @@ -1251,12 +1251,12 @@ Reason: %3 Update Available: %1 - 最新版本: %1 + 最新版本：%1 OpenPilot GCS Version: %1 - OpenPilot GCS 当前版本: %1 + OpenPilot GCS 当前版本：%1 @@ -1869,12 +1869,12 @@ p, li { white-space: pre-wrap; } DataObject - + 事件类型 ObjectField - + 事件 @@ -2588,7 +2588,7 @@ p, li { white-space: pre-wrap; } ObjectField - + 事件 @@ -3442,7 +3442,7 @@ p, li { white-space: pre-wrap; } ms - + 毫秒 @@ -3662,7 +3662,7 @@ p, li { white-space: pre-wrap; } Altitude: - + 海拔： @@ -3769,7 +3769,7 @@ p, li { white-space: pre-wrap; } Choose Gadget... - + 选择一个应用... @@ -3778,19 +3778,21 @@ p, li { white-space: pre-wrap; } Choose a gadget to display in this view. - + 请为此视图选择一个应用。 + You can also split this view in two. - + 你也可以将此视图分割成两个视图。 + Maybe you first have to choose Edit Gadgets Mode in the Window menu. - + 请先执行“窗口”菜单中的“工作区编辑模式”。 @@ -3824,7 +3826,7 @@ p, li { white-space: pre-wrap; } Images (*.png *.jpg *.bmp *.xpm) - + 图片文件 (*.png *.jpg *.bmp *.xpm) @@ -4251,7 +4253,7 @@ p, li { white-space: pre-wrap; } Move the magic waypoint to the home position - + 将特殊航点移到原点位置 @@ -4437,7 +4439,7 @@ p, li { white-space: pre-wrap; } ms - + 毫秒 @@ -4483,32 +4485,32 @@ p, li { white-space: pre-wrap; } Mode: - + 模式： Serial Connection - + 串口连接 Data Bits: - + 数据位： Stop Bits: - + 停止位： Parity: - + 奇偶校验： Timeout(ms): - + 超时(毫秒)： @@ -4518,12 +4520,12 @@ p, li { white-space: pre-wrap; } Port Speed: - + 波特率： Flow Control: - + 流控制： @@ -4531,7 +4533,7 @@ p, li { white-space: pre-wrap; } Coord: - + 坐标： @@ -4684,7 +4686,7 @@ p, li { white-space: pre-wrap; } Pitch - + 俯仰 @@ -4719,7 +4721,7 @@ p, li { white-space: pre-wrap; } Roll - + 横滚 @@ -4942,17 +4944,17 @@ have to define channel output range using Output configuration tab. Yaw - + 方向 Pitch - + 俯仰 Roll - + 横滚 @@ -5006,7 +5008,7 @@ AxisLock: camera remembers tracking attitude. Input controls the rate of deflect Attitude - + 姿态 @@ -5432,26 +5434,14 @@ The same value is used for all axes. USB HID Port USB HID 端口 - - - MainPort - 不用翻译，保持跟硬件板上一致 - - - - - FlexiPort - - USB VCP Port - RcvrPort - 遥控接收器端口 + 遥控接收器端口 @@ -5486,6 +5476,21 @@ Beware of not locking yourself out! GPS protocol : GPS协议 : + + + Main Port + + + + + Flexi Port + + + + + Receiver Port + 遥控接收器端口 + ccattitude @@ -5655,7 +5660,7 @@ A setting of 0.00 disables the filter. Right - + 右 @@ -5665,7 +5670,7 @@ A setting of 0.00 disables the filter. Left - + 左 @@ -5770,12 +5775,12 @@ A setting of 0.00 disables the filter. Pitch - + 俯仰 Roll - + 横滚 @@ -5790,7 +5795,7 @@ A setting of 0.00 disables the filter. Start - + 开始 @@ -5810,22 +5815,22 @@ A setting of 0.00 disables the filter. Status - + 状态 Neutral - + 中值 Max - + 最大值 Min - + 最小值 @@ -5835,7 +5840,7 @@ A setting of 0.00 disables the filter. Position - + 位置 @@ -5870,7 +5875,7 @@ A setting of 0.00 disables the filter. Yaw - + 方向 @@ -6533,25 +6538,22 @@ Applies and Saves all settings to SD 490 - Output configuration - 输出设置 + 输出设置 Bank(Channels): - 输出集： + 序号： - Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value - 设置PWM：通常多轴飞行器是490Hz。OneShot以及OneShot125则不需要配置此项 + 设置PWM：通常多轴飞行器是490Hz。OneShot以及OneShot125则不需要配置此项 - Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value - 设置PWM：通常多轴飞行器是490Hz。OneShot以及OneShot125则不需要配置此项 + 设置PWM：通常多轴飞行器是490Hz。OneShot以及OneShot125则不需要配置此项 @@ -6559,20 +6561,33 @@ Applies and Saves all settings to SD 模式： - Setup output mode. Use PWM or OneShot with Standard ESCs. Several other ESCs like BLHeli 13+ can use the more advanced OneShot125. When using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - 标准电调配置为PWM或OneShot模式。 + 标准电调配置为PWM或OneShot模式。 +类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。 +当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后再输出给电调 （例如：1000/8 = 125, 2000/8 = 250).。 + + + Setup output mode. Use PWM or OneShot with Standard ESCs.\nSeveral other ESCs like BLHeli 13+ can use the more advanced OneShot125.\nWhen using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). + 标准电调配置为PWM或OneShot模式。 类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。 当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后再输出给电调 （例如：1000/8 = 125, 2000/8 = 250).。 - Setup output mode. Use PWM or OneShot with Standard ESCs.\nSeveral other ESCs like BLHeli 13+ can use the more advanced OneShot125.\nWhen using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - 标准电调配置为PWM或OneShot模式。 -类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。 -当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后再输出给电调 （例如：1000/8 = 125, 2000/8 = 250).。 + GroupBox + 输出集 + + + + <html><head/><body><p>Setup PWM rate here: usual value is 490 Hz for multirotor airframes.<br/>PWMSync and OneShot125 does not use this value.</p></body></html> + <html><head/><body><p>设置PWM：通常多轴飞行器是490Hz。<br/><br/>PWMSync以及OneShot125则不需要配置此项 + + + + <html><head/><body><p>Setup output mode. Use PWM or PWMSync with Standard ESCs.<br/>Several other ESCs like BLHeli 13+ can use the more advanced OneShot125.<br/>When using OneShot125 all values set in min/max and idle are divided by <br/>eight before being sent to esc (i.e. 1000 = 125, 2000 = 250).</p></body></html> + <html><head/><body><p>标准电调配置为PWM或OneShot模式。<br/>类似于BLHeli 13+的电调则可以配置为更先进的OneShot125模式。<br/>当使用OneShot125模式时，最小/最大 以及 空闲 的数值将被除与8以后</br>再输出给电调 （例如：1000/8 = 125, 2000/8 = 250)。</p></body></html> @@ -6642,10 +6657,9 @@ When using OneShot125 all values set in min/max and idle are divided by eight be # - 输出集 - Minimum PWM value, beware of not overdriving your servo. Using OneShot125 a value of 1000(uS) here will produce a pulse of 125(uS). - PWM最小值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。 + PWM最小值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。 如果使用OneShot125模式，实际输出脉冲为该值的1/8，即设置值为1000uS，实际输出值为125uS. @@ -6664,12 +6678,16 @@ Using OneShot125 a value of 1000(uS) here will produce a pulse of 125(uS). - Maximum value, beware of not overdriving your servo. Using OneShot125 a value of 2000(uS) here will produce a pulse of 250(uS). - PWM最大值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。 + PWM最大值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。 如果使用OneShot125模式，实际输出脉冲值为该值的1/8，即设置值为1000uS，实际输出值为125uS. + + + <html><head/><body><p>Minimum PWM value, beware of not overdriving your servo.<br/>Using OneShot125 a value of 1000(µs) here will produce a pulse of 125(µs).</p></body></html> + <html><head/><body><p>PWM最大值，如果此通道连接的是伺服舵机，请确保设置值不会造成电机过载。<br/>如果使用OneShot125模式，实际输出脉冲值为该值的1/8，即设置值为1000µs，实际输出值为125µs。</p></body></html> + RevoSensorsWidget @@ -6681,12 +6699,12 @@ Using OneShot125 a value of 2000(uS) here will produce a pulse of 250(uS). Calibration - + 水平校准 Start - + 开始 @@ -6813,32 +6831,32 @@ p, li { white-space: pre-wrap; } Rotate virtual attitude relative to board - + 飞行控制板与真实飞行姿态相对旋转角度 Roll - + 横滚 Yaw - + 方向 Pitch - + 俯仰 Filtering - + 低通过滤 Accelerometers - + 加速度传感器 @@ -6852,7 +6870,14 @@ Range: 0.00 - 0.20, Good starting value: 0.05 - 0.10 Start low and raise until drift stops. A setting of 0.00 disables the filter. - + 加速度传感器阙值。 + +过滤加速度传感器偏移误差。 +设置适当的阙值可以有效过滤传感器偏移误差，提升飞行器自稳性能。 + +范围：0.00到0.20，通常设置在0.05至0.10区间比较好 + +设定0.00关闭该功能。 @@ -6877,7 +6902,7 @@ A setting of 0.00 disables the filter. Latitude: - + 纬度： @@ -6897,7 +6922,7 @@ A setting of 0.00 disables the filter. Altitude: - + 海拔： @@ -6932,7 +6957,7 @@ A setting of 0.00 disables the filter. Longitude: - + 经度： @@ -7049,17 +7074,17 @@ p, li { white-space: pre-wrap; } Roll - + 横滚 Pitch - + 俯仰 Yaw - + 方向 @@ -7351,7 +7376,7 @@ value as the Kp. Takes you to the wiki page - + 点击打开wiki知识库 @@ -7527,7 +7552,7 @@ Useful if you have accidentally changed some settings. Attitude - + 姿态 @@ -8146,12 +8171,12 @@ Up to 3 separate PID options (or option pairs) can be selected and updated. Min - + 最小值 Max - + 最大值 @@ -8577,7 +8602,7 @@ only when system is armed without disabling the module. Save to file - + 保存到文件 @@ -8635,17 +8660,17 @@ only when system is armed without disabling the module. Latitude: - + 纬度： Longitude: - + 经度： Altitude: - + 海拔： @@ -8726,7 +8751,7 @@ only when system is armed without disabling the module. Serial Connection - + 串口连接 @@ -8944,7 +8969,7 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">To continue, the wizard needs to determine the configuration required for the type of OpenPilot controller you have. When connected, the wizard will attempt to automatically detect the type of board.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If the board is already connected and successfully detected, the board type will already be displayed. You can </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">Disconnect</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;"> and select another device if you need to detect another board.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">If your board is not connected, please connect the board to a USB port on your computer and select the device from the list below. Then press </span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt; font-weight:600;">Connect</span><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">.</span></p></body></html> - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> @@ -9150,19 +9175,32 @@ Please select the type of multirotor you want to create a configuration for belo - - + + Start 开始 - - + + + + + Output value : <b>%1</b> µs + 输出值：<b>%1</b>µs + + + + <html><head/><body><p><span style=" font-size:10pt;">To find </span><span style=" font-size:10pt; font-weight:600;">the neutral rate for this reversable motor</span><span style=" font-size:10pt;">, press the Start button below and slide the slider to the right or left until you find the value where the motor doesn't start. <br/><br/>When done press button again to stop.</span></p></body></html> + + + + + Stop 停止 - + The actuator module is in an error state. Please make sure the correct firmware version is used then restart the wizard and try again. If the problem persists please consult the openpilot.org support forum. @@ -9192,14 +9230,13 @@ p, li { white-space: pre-wrap; } </body></html> - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">In this step we will set the neutral rate for the motor highlighted in the illustration to the right. <br />Please pay attention to the details and in particular the motors position and its rotation direction. Ensure the motors are spinning in the correct direction as shown in the diagram. Swap any 2 motor wires to change the direction of a motor. </span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">To find </span><span style=" font-size:10pt; font-weight:600;">the neutral rate for this motor</span><span style=" font-size:10pt;">, press the Start button below and slide the slider to the right until the motor just starts to spin stable. <br /><br />When done press button again to stop.</span></p></body></html> - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> @@ -9240,6 +9277,30 @@ p, li { white-space: pre-wrap; } Max 最大值 + + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">In this step we will set the neutral rate for the motor highlighted in the illustration to the right. <br />Please pay attention to the details and in particular the motors position and its rotation direction. Ensure the motors are spinning in the correct direction as shown in the diagram. Swap any 2 motor wires to change the direction of a motor. </span></p></body></html> + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:10pt;">现在向导将引导您为右图中高亮显示的电机设置怠速输出量。<br />请注意观察电机是否按照图中所示的顺时针或逆时针方向旋转。如若电机旋转方向和示意图中相反，请将三根电机输入线中的任意两根对调。</span></p> +</body></html> + + + + <html><head/><body><p><span style=" font-size:10pt;">To find </span><span style=" font-size:10pt; font-weight:600;">the neutral rate for this motor</span><span style=" font-size:10pt;">, press the Start button below and slide the slider to the right until the motor just starts to spin stable. <br/><br/>When done press button again to stop.</span></p></body></html> + <html><head/><body><p><span style=" font-size:10pt;">为了帮助您找到</span><span style=" font-size:10pt; font-weight:600;">该电机的怠速点</span><span style=" font-size:10pt;">，请点击下面的“开始”按钮，拖动滑动条直到电机开始以最低速稳定旋转。<br/><br/>完成后请点击“停止”按钮。</span></p></body></html> + + + + Output value: 1000µs + 输出值：1000µs + SavePage @@ -9351,7 +9412,7 @@ Please select the type of ground vehicle you want to create a configuration for Car - + 汽车 @@ -9361,7 +9422,7 @@ Please select the type of ground vehicle you want to create a configuration for Tank - + 坦克 @@ -9371,7 +9432,7 @@ Please select the type of ground vehicle you want to create a configuration for Motorcycle - + 摩托车 @@ -9525,12 +9586,12 @@ then close the dialog. Form - 界面 + 界面 Device Information - + 设备信息 @@ -9550,7 +9611,7 @@ then close the dialog. RW - + 可读/可写 @@ -9565,32 +9626,32 @@ then close the dialog. Open a file with new firmware image to be flashed - + 请选择需要烧写的固件 Open... - + 打开... Write loaded firmware image to the board - + 将固件烧写入硬件设备中 Flash - + 烧写... Read and save current board firmware to a file - + 从硬件设备上下载固件并保存 Retrieve... - + 下载... @@ -9600,87 +9661,87 @@ then close the dialog. Status - + 状态 Firmware: - + 固件： Board name: - + 设备： Firmware tag: - + 固件标签： Firmware date: - + 编译时间： Git commit hash: - + Git commit hash： CRC: - + 固件CRC： On Device - + 板载信息 lblBrdName - + lblDescription - + lblBuildDate - + lblGitTag - + lblCRC - + lblCertified - + Loaded - 已载入 + 已加载 lblDescritpionL - + lblCertifiedL - + @@ -9690,7 +9751,7 @@ then close the dialog. I know what I'm doing! - + 确认当前操作！ @@ -9779,7 +9840,10 @@ Only useful if the system is halted If telemetry is not running, select the link using the dropdown menu on the right. - + 启动系统进入安全模式（使用默认设置）。 +（控制板上蓝色LED慢速闪烁，橙色LED不亮） + +从右边的下拉菜单中选择适当的连接方式。 @@ -9941,7 +10005,7 @@ p, li { white-space: pre-wrap; } Project News - + 项目近况 @@ -9949,37 +10013,37 @@ p, li { white-space: pre-wrap; } OpenPilot Websites - + OpenPilot网站 Home - 主页 + 主页 Wiki - + Wiki知识库 Store - + 商店 Forums - + 论坛 Code Reviews - + Progress Tracker - + @@ -10009,15 +10073,15 @@ p, li { white-space: pre-wrap; } Input - + 输入 Output - 输出 + 输出 - + @@ -10025,25 +10089,25 @@ p, li { white-space: pre-wrap; } - + Configuration OK - + 设置成功 - + <font color='red'>ERROR: Assign a Yaw channel</font> - + <font color='red'>错误：请为方向舵指定一个输出通道</font> - + Duplicate channel in motor outputs - + 通道已经被占用 Channel already used - + 通道已经被占用 @@ -10086,7 +10150,7 @@ p, li { white-space: pre-wrap; } http://wiki.openpilot.org/x/D4AUAQ - + @@ -10099,7 +10163,7 @@ p, li { white-space: pre-wrap; } http://wiki.openpilot.org/x/44Cf - + @@ -10419,7 +10483,7 @@ Move the %1 stick. OpenPilot Log (*.opl) - + OpenPilot日志文件(*.opl) @@ -10538,7 +10602,7 @@ Move the %1 stick. File Parsing Failed. - + 文件解析失败。 @@ -10548,12 +10612,12 @@ Move the %1 stick. Wrong file contents - + 文件内容错误 This file does not contain correct UAVSettings - + 文件包含错误的UAV设置 @@ -10574,7 +10638,7 @@ Move the %1 stick. Save File - + 保存文件 @@ -10603,7 +10667,7 @@ Move the %1 stick. Controller type: - 设备类型： + 设备类型： @@ -10949,7 +11013,7 @@ Move the %1 stick. - + Writing mixer settings @@ -11456,7 +11520,7 @@ The board will be restarted and all settings erased. Right - + 右 @@ -11466,7 +11530,7 @@ The board will be restarted and all settings erased. Left - + 左 @@ -11571,12 +11635,12 @@ The board will be restarted and all settings erased. Pitch - + 俯仰 Roll - + 横滚 @@ -11591,7 +11655,7 @@ The board will be restarted and all settings erased. Start - + 开始 @@ -11611,22 +11675,22 @@ The board will be restarted and all settings erased. Status - + 状态 Neutral - + 中值 Max - + 最大值 Min - + 最小值 @@ -11636,7 +11700,7 @@ The board will be restarted and all settings erased. Position - + 位置 @@ -11671,7 +11735,7 @@ The board will be restarted and all settings erased. Yaw - + 方向 @@ -11699,22 +11763,22 @@ The board will be restarted and all settings erased. Type - + 类型 Roll - + 横滚 Pitch - + 俯仰 Yaw - + 方向 @@ -11807,12 +11871,12 @@ The board will be restarted and all settings erased. Airframe - + 飞行器 Throttle Curve - + 油门曲线 @@ -11822,7 +11886,7 @@ The board will be restarted and all settings erased. Roll - + 横滚 @@ -11837,12 +11901,12 @@ The board will be restarted and all settings erased. Pitch - + 俯仰 Airframe Type: - + 飞行器类型： @@ -12063,7 +12127,7 @@ Typical values are 100% for + configuration and 50% for X configuration on quads Weight of Yaw mixing in percent. Typical value is 50% for + or X configuration on quads. - 方向控制量权重 + 方向控制量权重 十字型和X型四轴飞行器通常都设为50%。 @@ -12174,7 +12238,7 @@ Typical value is 50% for + or X configuration on quads. RC Input - + 遥控输入 @@ -12227,12 +12291,12 @@ Typical value is 50% for + or X configuration on quads. HW settings - + 硬件设置 Changes on this page only take effect after board reset or power cycle - + 所有配置信息将在控制板重启才生效 @@ -12247,7 +12311,7 @@ Typical value is 50% for + or X configuration on quads. Receiver Port - + 遥控接收器端口 @@ -12277,13 +12341,14 @@ Typical value is 50% for + or X configuration on quads. Takes you to the wiki page - + 点击打开wiki知识库 Send to OpenPilot but don't write in SD. Beware of not locking yourself out! - + 发送配置到OpenPilot控制板，但不保存。 +断电后配置将消失！ @@ -12294,7 +12359,7 @@ Beware of not locking yourself out! Applies and Saves all settings to SD. Beware of not locking yourself out! - + 发送配置到控制板并保存 @@ -12582,7 +12647,7 @@ even lead to crash. Use with caution. Status - + 状态 @@ -13271,7 +13336,7 @@ p, li { white-space: pre-wrap; } - + %1 µs @@ -13427,22 +13492,22 @@ p, li { white-space: pre-wrap; } WizardPage - + placeholder_text - + TextLabel - TextLabel + TextLabel Select: - + 请选择： @@ -13674,7 +13739,7 @@ p, li { white-space: pre-wrap; } Helicopter - + 直升机 @@ -13779,77 +13844,77 @@ Please try again. Project Activity - + 开发活动 Commented on - + Created - + Created and started - + Completed - + Closed - + Abandoned - + Committed - + Resolved - + Started - + Started working on - + Stopped working on - + Requested code review on - + Requested testing of - + Updated - + @@ -14162,7 +14227,7 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic ConfigOutputWidget - + The actuator module is in an error state. This can also occur because there are no inputs. Please fix these before testing outputs. @@ -14172,9 +14237,19 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic 打开此功能将会使用界面中的滑动条来替代遥控器的油门摇杆。强烈建议您在操作之前卸除螺旋桨。确定使用此功能吗？ - + + You may want to save your neutral settings. + 你可能需要保存当前怠速设置。 + + + http://wiki.openpilot.org/x/WIGf - + + + + + OneShot only works with Receiver Port settings marked with '+OneShot'<br>When using Receiver Port setting 'PPM_PIN6+OneShot' <b><font color='#C3A8FF'>Bank 4 (output 6,9-10)</font></b> must be set to PWM + 遥控接收器端口设置为“+OneShot”后才能<br>正常工作。假设设置为“PPM_PIN6+OneShot”，则<b><font color='#C3A8FF'>输出集4（6，9-10）</font></b>必须设置为PWM @@ -14218,7 +14293,7 @@ Please first select the area of the map to rip with <CTRL>+Left mouse clic Thrust - + 强推 @@ -14305,7 +14380,7 @@ not only the ones visible on screen. ConfigVehicleTypeWidget - + Multirotor 多轴飞行器 @@ -14330,7 +14405,7 @@ not only the ones visible on screen. 自定义 - + http://wiki.openpilot.org/x/44Cf @@ -14623,7 +14698,7 @@ Double click legend or plot to show/hide legend. Calibration timed out before receiving required updates. - 无法获取数据，校准等待超时 + 无法获取数据，校准等待超时。 @@ -14718,7 +14793,7 @@ Please select the type of fixed-wing you want to create a configuration for belo Elevon - + 升降副翼 @@ -14856,7 +14931,7 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Type - + 类型 @@ -14930,27 +15005,27 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Device ID: - + 设备ID： HW Revision: - + 硬件版本： Flash access: - + Flash读写权限： Max code size: - + BL version: - + Bootloader版本： @@ -14958,85 +15033,85 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Unknown - + 未知 Custom Firmware Build - + 非官方固件 No file loaded - + 未读取到有效文件 Tagged officially released firmware build - + 官方发布正式版固件 Untagged or custom firmware build - + 无法识别的固件或非官方固件 Can't calculate, file too big for device - + 文件太大 The board has the same firmware as loaded. No need to update. - + 固件与板载文件相同，无需升级。 WARNING: the loaded firmware is for different hardware. Do not update! - + 警告：固件与硬件设备不匹配，请勿升级！ The board has newer firmware than loaded. Are you sure you want to update? - + 硬件设备内固件版本高于您选取的文件，是否继续更新？ The loaded firmware is untagged or custom build. Update only if it was received from a trusted source (official website or your own build). - + 选取的文件为非官方正式版，建议您只信任官方渠道获取正式发布版或自行编译的文件。 This is the tagged officially released OpenPilot firmware. - + 此固件为OpenPilot官方发布正式版。 WARNING: the loaded firmware was not packaged with the OpenPilot format. Do not update unless you know what you are doing. - + 警告：文件并非OpenPilot格式，请确定是否继续操作。 Firmware loaded: - + 固件读取成功： Select firmware file - + 选择固件 Firmware Files (*.opfw *.bin) - + Firmware Files (*.bin) - + @@ -15049,7 +15124,7 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Firmware CRC: - 校验和： + 固件CRC： @@ -15061,7 +15136,7 @@ Note: for the OpenPilot v8 GPS please select the U-Blox option. Firmware tag: - 标签： + 固件标签： From 3bcf22fea3046f8c879a8699dae12dd2a8afa09d Mon Sep 17 00:00:00 2001 From: Laurent Lalanne Date: Tue, 24 Feb 2015 23:53:51 +0100 Subject: [PATCH 10/12] OP-1337 Last update for 15.02 --- .../translations/openpilotgcs_fr.ts | 358 +++++++++++------- 1 file changed, 215 insertions(+), 143 deletions(-) diff --git a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_fr.ts b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_fr.ts index 730541f42..a92ea94e1 100644 --- a/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_fr.ts +++ b/ground/openpilotgcs/share/openpilotgcs/translations/openpilotgcs_fr.ts @@ -5627,26 +5627,11 @@ La même valeur est utilisé pour tous les axes. USB HID Port - - - MainPort - - - - - FlexiPort - - USB VCP Port - - - RcvrPort - - Takes you to the wiki page @@ -5681,6 +5666,21 @@ Méfiez-vous de ne pas vous verrouiller l'accès ! GPS protocol : Protocole GPS : + + + Main Port + + + + + Flexi Port + + + + + Receiver Port + + ccattitude @@ -6162,19 +6162,16 @@ p, li { white-space: pre-wrap; } Zone morte du manche en pourcentage du débattement maxi (0-10), zéro pour désactiver - Back - Précédent + Précédent - Next - Suivant + Suivant - Cancel - Annuler + Annuler @@ -6667,41 +6664,6 @@ Applique et Enregistre tous les paramètres sur la SD Update rate: Fréquence de rafraîchissement : - - - 50 - - - - - 60 - - - - - 125 - - - - - 165 - - - - - 270 - - - - - 330 - - - - - 400 - - Motors spin at neutral output when armed and throttle below zero (be careful) @@ -6765,53 +6727,34 @@ Applique et Enregistre tous les paramètres sur la SD Configurer ici "RapidESC" : 490Hz est une valeur classique pour les multirotors. - - - 490 - - - - - Output configuration - - Bank(Channels): - - - - - Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value - - - - - Setup output mode. Use PWM or OneShot with Standard ESCs.\nSeveral other ESCs like BLHeli 13+ can use the more advanced OneShot125.\nWhen using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - - - - - Setup PWM rate here: usual value is 490 Hz for multirotor airframes. OneShot and OneShot125 does not use this value - - + Banque (Canaux) : Mode: - Mode : + Mode : - - Setup output mode. Use PWM or OneShot with Standard ESCs. -Several other ESCs like BLHeli 13+ can use the more advanced OneShot125. -When using OneShot125 all values set in min/max and idle are divided by eight before being sent to esc (i.e. 1000 = 125, 2000 = 250). - - - - Calibration status - Statut de l'étalonnage + Statut de l'étalonnage + + + + Output Configuration + Configuration Sorties + + + + <html><head/><body><p>Setup PWM rate here: usual value is 490 Hz for multirotor airframes.<br/>PWMSync and OneShot125 does not use this value.</p></body></html> + <html><head/><body><p>Sélectionnez ici la vitesse PWM : une valeur usuelle est 490 Hz pour les multirotors.<br/>PWMSync et OneShot125 n'utilisent pas cette valeur.</p></body></html> + + + + <html><head/><body><p>Setup output mode. Use PWM or PWMSync with Standard ESCs.<br/>Several other ESCs like BLHeli 13+ can use the more advanced OneShot125.<br/>When using OneShot125 all values set in min/max and idle are divided by <br/>eight before being sent to esc (i.e. 1000 = 125, 2000 = 250).</p></body></html> + <html><head/><body><p>Configuration du mode de sortie. Utilisez PWM ou PWMSync avec des ESC Standard.<br/>D'autres contrôleurs comme les BLHeli 13+ peuvent utiliser le mode avancé OneShot125.<br/>Lorsque vous utilisez OneShot125 toutes les valeurs min/max et neutre sont divisées par <br/>huit avant d'être envoyées vers le contrôleur (ex. 1000 = 125, 2000 = 250).</p></body></html> @@ -6882,34 +6825,27 @@ When using OneShot125 all values set in min/max and idle are divided by eight be # - Bank - - - - - Minimum PWM value, beware of not overdriving your servo. -Using OneShot125 a value of 1000(uS) here will produce a pulse of 125(uS). - + # - Banque 0 - 0 + Bank number - + Numéro banque 0 - + - Maximum value, beware of not overdriving your servo. -Using OneShot125 a value of 2000(uS) here will produce a pulse of 250(uS). - + <html><head/><body><p>Minimum PWM value, beware of not overdriving your servo.<br/>Using OneShot125 a value of 1000(µs) here will produce a pulse of 125(µs).</p></body></html> + <html><head/><body><p>Valeur minimum PWM, attention de respecter les limites de votre servo.<br/>En utilisant OneShot125 une valeur de 1000(µs) ici produit une impulsion de 125(µs).</p></body></html> @@ -9187,7 +9123,7 @@ les données en cache Diagramme de Connexion - + Save File Enregistrer Fichier @@ -10634,7 +10570,7 @@ p, li { white-space: pre-wrap; } Sortie - + @@ -10738,7 +10674,7 @@ Voulez-vous toujours continuer ? ConfigInputWidget - + http://wiki.openpilot.org/x/04Cf @@ -10755,12 +10691,11 @@ Voulez-vous toujours continuer ? Vous devrez reconfigurer manuellement les paramètres d'armement lorsque l'assistant sera terminé. Après la dernière étape de l'assistant, vous serez redirigé vers l'écran des Paramètres d'Armement. - + Next Suivant - Welcome to the inputs configuration wizard. Please follow the instructions on the screen and only move your controls when asked to. @@ -10768,7 +10703,7 @@ Make sure you already configured your hardware settings on the proper tab and re You can press 'back' at any time to return to the previous screen or press 'Cancel' to quit the wizard. - Bienvenu(e) dans l'assistant de configuration des entrées. + Bienvenu(e) dans l'assistant de configuration des entrées. Veuillez suivre les instructions à l'écran et bouger les commandes uniquement lorsque demandé. Vérifiez que vous avez déjà bien configuré vos paramètres matériels dans l'onglet correspondant et redémarré votre carte. @@ -10776,33 +10711,28 @@ Vérifiez que vous avez déjà bien configuré vos paramètres matériels dans l Vous pouvez appuyer à tout moment sur 'Précédent' pour revenir à l'écran précédent ou appuyer sur 'Annuler' pour quitter l'assistant. - Please choose your transmitter type: - Veuillez choisir votre type d'émetteur : + Veuillez choisir votre type d'émetteur : - Acro: normal transmitter for fixed-wing or quad [Platypus]mettre quadicopter ? - Acro : émetteur normal pour une aile ou un quad + Acro : émetteur normal pour une aile ou un quad - Helicopter: has collective pitch and throttle input - Hélicoptère : avec pas collectif et commande des gaz + Hélicoptère : avec pas collectif et commande des gaz - If selecting the Helicopter option, please engage throttle hold now. - Si vous avez sélectionné l'option Hélicoptère, veuillez enclencher et maintenir les gaz. + Si vous avez sélectionné l'option Hélicoptère, veuillez enclencher et maintenir les gaz. - Please choose your transmitter mode: - Veuillez sélectionner votre mode de pilotage : + Veuillez sélectionner votre mode de pilotage : - + Mode 1: Fore/Aft Cyclic and Yaw on the left, Throttle/Collective and Left/Right Cyclic on the right Mode pilotage Hélicoptères: (Notice Graupner) 1: Longitudinal, Anti-couple, à gauche et Moteur/Pas, Latéral, à droite @@ -10840,7 +10770,7 @@ Vous pouvez appuyer à tout moment sur 'Précédent' pour revenir à l Mode 4 : Gaz/Pas et Rotation Droite/Gauche, Rotation Avant/Arrière et Anti-couple à droite - + Mode 1: Elevator and Rudder on the left, Throttle and Ailerons on the right Profondeur - Dérive - Gaz - ailerons : mode avion Mode 1 : Profondeur et Dérive à gauche, Gaz et Ailerons à droite @@ -10870,40 +10800,36 @@ Vous pouvez appuyer à tout moment sur 'Précédent' pour revenir à l Pour un Quadricoptère : Profondeur correspond à la Rotation Avant, Ailerons à Roulis et Dérive correspond à Lacet. - Please center all controls and trims and press Next when ready. If your FlightMode switch has only two positions, leave it in either position. compensateur (me parle pas bcp) Laisser Trim ? Répétition 'et'. - Veuillez positionner tous les manches/trims en position centrale et appuyer sur Suivant lorsque vous êtes prêt. + Veuillez positionner tous les manches/trims en position centrale et appuyer sur Suivant lorsque vous êtes prêt. Si votre interrupteur de Mode de Vol a seulement deux positions, laissez-le dans n'importe quelle position. - Please move all controls to their maximum extents on both directions. Press Next when ready. - Veuillez bouger les manches et les commandes d'accessoires au maximum, dans toutes les directions. + Veuillez bouger les manches et les commandes d'accessoires au maximum, dans toutes les directions. Appuyez sur Suivant lorsque vous êtes prêt. - Please check the picture below and correct all the sticks which show an inverted movement. Press Next when ready. - Veuillez vérifier l'image ci-dessous et corriger les manches qui s'affichent en sens inverse. Appuyer sur Suivant lorsque vous êtes prêt. + Veuillez vérifier l'image ci-dessous et corriger les manches qui s'affichent en sens inverse. Appuyer sur Suivant lorsque vous êtes prêt. - You have completed this wizard, please check below if the picture mimics your sticks movement. IMPORTANT: These new settings have not been saved to the board yet. After pressing Next you will go to the Arming Settings tab where you can set your desired arming sequence and save the configuration. - Vous avez terminé cet assistant, veuillez vérifier ci-dessous si l'image correspond à vos mouvements de manches + Vous avez terminé cet assistant, veuillez vérifier ci-dessous si l'image correspond à vos mouvements de manches IMPORTANT : Ces nouveaux paramètres ne sont pas encore enregistrés sur la carte. Après avoir appuyé sur Suivant vous serez dirigé vers l'onglet Paramètres d'Armement où vous pourrez choisir votre séquence d'armement et enregistrer la configuration. - + Please enable throttle hold mode. Move the Collective Pitch stick. @@ -11323,14 +11249,14 @@ Double clic sur la légende ou le tracé pour afficher/cacher la légende. - + Unknown Inconnu - + Vehicle type: Type de véhicule : @@ -11490,6 +11416,11 @@ Double clic sur la légende ou le tracé pour afficher/cacher la légende.Rapid ESC (%1 Hz) Contrôleur Rapide (%1 Hz) + + + Oneshot ESC + Contrôleur OneShot + Servo type: @@ -11579,7 +11510,7 @@ Double clic sur la légende ou le tracé pour afficher/cacher la légende.Échoué ! - + Writing External Mag sensor settings Écriture paramètres Compas Externe @@ -11599,9 +11530,9 @@ Double clic sur la légende ou le tracé pour afficher/cacher la légende.Écriture paramètres matériels - - - + + + Writing actuator settings Écriture paramètres actionneurs @@ -13627,7 +13558,18 @@ p, li { white-space: pre-wrap; } ConfigOutputWidget - + + - + - + + + + + %1 Hz + %1 Hz + + + The actuator module is in an error state. This can also occur because there are no inputs. Please fix these before testing outputs. Le module actionneur est en erreur. Cela peut aussi arriver lorsque il n'y a pas d'entrées (Rx radiocommande). Veuillez corriger cela avant de tester les sorties. @@ -13642,15 +13584,19 @@ p, li { white-space: pre-wrap; } Vous pouvez enregistrer vos changements des réglages de neutre. - + http://wiki.openpilot.org/x/WIGf - + + OneShot only works with Receiver Port settings marked with '+OneShot'<br>When using Receiver Port setting 'PPM_PIN8+OneShot' <b><font color='%1'>Bank %2</font></b> must be set to PWM + OneShot fonctionne uniquement avec les ports récepteur marqués avec '+OneShot'<br>Lors de l'utilisation de la configuration 'PPM_PIN8+OneShot' <b><font color='%1'>la Banque %2</font></b> doit être réglée sur PWM + + OneShot only works with MainPort settings marked with "+OneShot" Using "PPM_PIN6+OneShot" bank 4 (output 6) must be set to PWM - OneShot fonctionne uniquement avec les réglages de Mainport marqués avec "+OneShot" + OneShot fonctionne uniquement avec les réglages de Mainport marqués avec "+OneShot" En utilisant "PPM_PIN6+OneShot" la banque 4 (sortie 6) doit être réglée sur PWM @@ -15260,6 +15206,11 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Afin de régler de manière optimale la configuration des signaux de sortie qui pilotent vos moteurs, l'assistant doit connaître le type de contrôleur de vitesse (ESC) utilisé et leurs capacités.</span></p> <p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:10pt;">Veuillez sélectionner une des options ci-dessous. En cas de doute sur les possibilités de vos ESC, laissez l'option sélectionnée par défaut et continuez l'assistant.</span></p></body></html> + + + OneShot ESC + ESC OneShot + SelectionPage @@ -15998,4 +15949,125 @@ p, li { white-space: pre-wrap; } Pour appliquer les changements d'association/dissociation la carte doit être redémarrée ou débranchée/rebranchée. + + InputWizardWidget + + + Welcome to the inputs configuration wizard. + +Please follow the instructions on the screen and only move your controls when asked to. +Make sure you already configured your hardware settings on the proper tab and restarted your board. + +You can press 'back' at any time to return to the previous screen or press 'Cancel' to quit the wizard. + + Bienvenu(e) dans l'assistant de configuration des entrées. + +Veuillez suivre les instructions à l'écran et bouger les commandes uniquement lorsque demandé. +Vérifiez que vous avez déjà bien configuré vos paramètres matériels dans l'onglet correspondant et redémarré votre carte. + +Vous pouvez appuyer à tout moment sur 'Précédent' pour revenir à l'écran précédent ou appuyer sur 'Annuler' pour quitter l'assistant. + + + + Please choose your transmitter type: + Veuillez choisir votre type d'émetteur : + + + + Acro: normal transmitter for fixed-wing or quad + Acro : émetteur normal pour une aile ou un quad + + + + Helicopter: has collective pitch and throttle input + Hélicoptère : avec pas collectif et commande des gaz + + + + If selecting the Helicopter option, please engage throttle hold now. + Si vous avez sélectionné l'option Hélicoptère, veuillez enclencher et maintenir les gaz. + + + + Please choose your transmitter mode: + Veuillez sélectionner votre mode de pilotage : + + + + Mode 1 + + + + + Mode 2 + + + + + Mode 3 + + + + + Mode 4 + + + + + For a Quad: Elevator is Pitch, Ailerons are Roll, and Rudder is Yaw. + Pour un Quadricoptère : Profondeur correspond à la Rotation Avant, Ailerons à Roulis et Dérive correspond à Lacet. + + + + Identify sticks instructions + Identifiez les instructions de manches + + + + Please center all controls and trims and press Next when ready. + +If your FlightMode switch has only two positions, leave it in either position. + Veuillez positionner tous les manches/trims en position centrale et appuyer sur Suivant lorsque vous êtes prêt. + +Si votre interrupteur de Mode de Vol a seulement deux positions, laissez-le dans n'importe quelle position. + + + + Please move all controls to their maximum extents on both directions. + +Press Next when ready. + Veuillez bouger les manches et les commandes d'accessoires au maximum, dans toutes les directions. + +Appuyez sur Suivant lorsque vous êtes prêt. + + + + Please check the picture below and correct all the sticks which show an inverted movement. Press Next when ready. + Veuillez vérifier l'image ci-dessous et corriger les manches qui s'affichent en sens inverse. Appuyer sur Suivant lorsque vous êtes prêt. + + + + You have completed this wizard, please check below if the picture mimics your sticks movement. + +IMPORTANT: These new settings have not been saved to the board yet. After pressing Next you will go to the Arming Settings tab where you can set your desired arming sequence and save the configuration. + Vous avez terminé cet assistant, veuillez vérifier ci-dessous si l'image correspond à vos mouvements de manches + +IMPORTANT : Ces nouveaux paramètres ne sont pas encore enregistrés sur la carte. Après avoir appuyé sur Suivant vous serez dirigé vers l'onglet Paramètres d'Armement où vous pourrez choisir votre séquence d'armement et enregistrer la configuration. + + + + Back + Précédent + + + + Next + Suivant + + + + Cancel + Annuler + + From 6701b5794359a2f958cab74e5fa4fc5054190289 Mon Sep 17 00:00:00 2001 From: Laurent Lalanne Date: Wed, 25 Feb 2015 00:32:44 +0100 Subject: [PATCH 11/12] Add Sam to credits, thanks for Chinese translations. --- CREDITS.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/CREDITS.txt b/CREDITS.txt index c5fa1be78..b5f7f316a 100644 --- a/CREDITS.txt +++ b/CREDITS.txt @@ -111,6 +111,7 @@ Kevin Vertucio Richard Von Lehe Alex Vrubel Mike Walters +Sam Wang Brian Webb Justin Welander Mat Wellington From aaa7c5b9c54906a840885b8621389455c74cf378 Mon Sep 17 00:00:00 2001 From: James Duley Date: Wed, 25 Feb 2015 12:57:16 +1300 Subject: [PATCH 12/12] fix some artwork permissions --- artwork/3D Model/boards/OPGPSv9/OPGPSv9.3DS | Bin artwork/3D Model/boards/OPGPSv9/OPGPSv9.jpg | Bin artwork/3D Model/boards/OPGPSv9/TEXTURE.JPG | Bin .../3D Model/multi/blackout/BlackoutMiniHQuad.3DS | Bin .../3D Model/multi/blackout/BlackoutMiniHQuad.jpg | Bin 5 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 artwork/3D Model/boards/OPGPSv9/OPGPSv9.3DS mode change 100755 => 100644 artwork/3D Model/boards/OPGPSv9/OPGPSv9.jpg mode change 100755 => 100644 artwork/3D Model/boards/OPGPSv9/TEXTURE.JPG mode change 100755 => 100644 artwork/3D Model/multi/blackout/BlackoutMiniHQuad.3DS mode change 100755 => 100644 artwork/3D Model/multi/blackout/BlackoutMiniHQuad.jpg diff --git a/artwork/3D Model/boards/OPGPSv9/OPGPSv9.3DS b/artwork/3D Model/boards/OPGPSv9/OPGPSv9.3DS old mode 100755 new mode 100644 diff --git a/artwork/3D Model/boards/OPGPSv9/OPGPSv9.jpg b/artwork/3D Model/boards/OPGPSv9/OPGPSv9.jpg old mode 100755 new mode 100644 diff --git a/artwork/3D Model/boards/OPGPSv9/TEXTURE.JPG b/artwork/3D Model/boards/OPGPSv9/TEXTURE.JPG old mode 100755 new mode 100644 diff --git a/artwork/3D Model/multi/blackout/BlackoutMiniHQuad.3DS b/artwork/3D Model/multi/blackout/BlackoutMiniHQuad.3DS old mode 100755 new mode 100644 diff --git a/artwork/3D Model/multi/blackout/BlackoutMiniHQuad.jpg b/artwork/3D Model/multi/blackout/BlackoutMiniHQuad.jpg old mode 100755 new mode 100644