rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-01-30 15:52:12 +01:00
Code Issues Releases Activity

LP-512 PikoBLX board added

Browse Source
This commit is contained in:
Vladimir Zidar 2017-04-26 13:39:17 +02:00
parent ae1c3612e4
commit faf0ae7c04
39 changed files with 3141 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Makefile
View File

@ -340,7 +340,7 @@ PACKAGE_FW_TARGETS += fw_oplinkmini
PACKAGE_FW_TARGETS += fw_gpsplatinum
PACKAGE_FW_TARGETS += fw_osd
PACKAGE_FW_TARGETS += fw_revoproto
PACKAGE_FW_TARGETS += fw_spracingf3evo fw_spracingf3 fw_nucleof303re
PACKAGE_FW_TARGETS += fw_spracingf3evo fw_spracingf3 fw_nucleof303re fw_pikoblx
# Rules to generate GCS resources used to embed firmware binaries into the GCS.
# They are used later by the vehicle setup wizard to update board firmware.

5
flight/Makefile
View File

@ -14,7 +14,7 @@ ALL_BOARDS += oplinkmini
ALL_BOARDS += gpsplatinum
ALL_BOARDS += osd
ALL_BOARDS += discoveryf4bare
ALL_BOARDS += ccf3d spracingf3 spracingf3evo nucleof303re
ALL_BOARDS += ccf3d spracingf3 spracingf3evo nucleof303re pikoblx
# SimPosix only builds on Linux
ifeq ($(UNAME), Linux)
ALL_BOARDS += simposix
@ -34,7 +34,8 @@ sparky2_short := 'spk2'
simposix_short := 'posx'
discoveryf4bare_short := 'df4b'
gpsplatinum_short := 'gps9'
nucleof303re_short := 'nf3b'
nucleof303re_short := 'nf3r'
pikoblx_short := 'piko'
# Start out assuming that we'll build fw, bl and bu for all boards
FW_BOARDS := $(ALL_BOARDS)

4
flight/pios/common/pios_flash_jedec.c
View File

@ -31,7 +31,7 @@
#include "pios.h"
#ifdef PIOS_INCLUDE_FLASH
#if defined(PIOS_INCLUDE_FLASH) && defined(PIOS_INCLUDE_SPI)
#include "pios_flash_jedec_priv.h"
#include "pios_flash_jedec_catalog.h"
@ -632,4 +632,4 @@ const struct pios_flash_driver pios_jedec_flash_driver = {
.read_data = PIOS_Flash_Jedec_ReadData,
};
#endif /* PIOS_INCLUDE_FLASH */
#endif /* PIOS_INCLUDE_FLASH && PIOS_INCLUDE_SPI */

45
flight/pios/common/pios_mpu6000.c
View File

@ -119,17 +119,21 @@ static PIOS_SENSORS_3Axis_SensorsWithTemp *queue_data = 0;
static struct mpu6000_dev *PIOS_MPU6000_alloc(const struct pios_mpu6000_cfg *cfg);
static int32_t PIOS_MPU6000_Validate(struct mpu6000_dev *dev);
static void PIOS_MPU6000_Config(struct pios_mpu6000_cfg const *cfg);
#ifdef PIOS_INCLUDE_SPI
static int32_t PIOS_MPU6000_SPI_SetReg(uint8_t address, uint8_t buffer);
static int32_t PIOS_MPU6000_SPI_GetReg(uint8_t address);
static void PIOS_MPU6000_SetSpeed(const bool fast);
static bool PIOS_MPU6000_HandleData(uint32_t gyro_read_timestamp);
static bool PIOS_MPU6000_SPI_ReadSensor(bool *woken);
static void PIOS_MPU6000_SetSpeed(const bool fast);
struct pios_mpu6000_io_driver spi_io_driver = {
.SetReg = PIOS_MPU6000_SPI_SetReg,
.GetReg = PIOS_MPU6000_SPI_GetReg,
.ReadSensor = PIOS_MPU6000_SPI_ReadSensor,
};
#endif /* PIOS_INCLUDE_SPI */
#ifdef PIOS_INCLUDE_I2C
static int32_t PIOS_MPU6000_I2C_SetReg(uint8_t address, uint8_t buffer);
static int32_t PIOS_MPU6000_I2C_GetReg(uint8_t address);
@ -141,6 +145,7 @@ struct pios_mpu6000_io_driver i2c_io_driver = {
};
#endif /* PIOS_INCLUDE_I2C */
static bool PIOS_MPU6000_HandleData(uint32_t gyro_read_timestamp);
static int32_t PIOS_MPU6000_Test(void);
void PIOS_MPU6000_Register()
@ -160,7 +165,11 @@ static struct mpu6000_dev *PIOS_MPU6000_alloc(const struct pios_mpu6000_cfg *cfg
mpu6000_dev->magic = PIOS_MPU6000_DEV_MAGIC;
if (cfg->i2c_addr == 0) {
#ifdef PIOS_INCLUDE_SPI
mpu6000_dev->driver = &spi_io_driver;
#else
PIOS_Assert(0)
#endif
} else {
#ifdef PIOS_INCLUDE_I2C
mpu6000_dev->driver = &i2c_io_driver;
@ -338,6 +347,7 @@ int32_t PIOS_MPU6000_ConfigureRanges(
return 0;
}
#ifdef PIOS_INCLUDE_SPI
/**
* @brief Claim the SPI bus for the accel communications and select this chip
* @return 0 if successful, -1 for invalid device, -2 if unable to claim bus
@ -484,6 +494,22 @@ int32_t PIOS_MPU6000_DummyReadGyros()
return 0;
}
static bool PIOS_MPU6000_SPI_ReadSensor(bool *woken)
{
const uint8_t mpu6000_send_buf[1 + PIOS_MPU6000_SAMPLES_BYTES] = { PIOS_MPU6000_SENSOR_FIRST_REG | 0x80 };
if (PIOS_MPU6000_ClaimBusISR(woken, true) != 0) {
return false;
}
if (PIOS_SPI_TransferBlock(dev->port_id, &mpu6000_send_buf[0], &mpu6000_data.buffer[0], sizeof(mpu6000_data_t), NULL) < 0) {
PIOS_MPU6000_ReleaseBusISR(woken);
return false;
}
PIOS_MPU6000_ReleaseBusISR(woken);
return true;
}
#endif /* PIOS_INCLUDE_SPI */
#ifdef PIOS_INCLUDE_I2C
static int32_t PIOS_MPU6000_I2C_SetReg(uint8_t address, uint8_t buffer)
{
@ -740,21 +766,6 @@ static bool PIOS_MPU6000_HandleData(uint32_t gyro_read_timestamp_p)
return higherPriorityTaskWoken == pdTRUE;
}
static bool PIOS_MPU6000_SPI_ReadSensor(bool *woken)
{
const uint8_t mpu6000_send_buf[1 + PIOS_MPU6000_SAMPLES_BYTES] = { PIOS_MPU6000_SENSOR_FIRST_REG | 0x80 };
if (PIOS_MPU6000_ClaimBusISR(woken, true) != 0) {
return false;
}
if (PIOS_SPI_TransferBlock(dev->port_id, &mpu6000_send_buf[0], &mpu6000_data.buffer[0], sizeof(mpu6000_data_t), NULL) < 0) {
PIOS_MPU6000_ReleaseBusISR(woken);
return false;
}
PIOS_MPU6000_ReleaseBusISR(woken);
return true;
}
// Sensor driver implementation
bool PIOS_MPU6000_driver_Test(__attribute__((unused)) uintptr_t context)
{

2
flight/pios/inc/pios_mpu6000.h
View File

@ -149,8 +149,10 @@ struct pios_mpu6000_cfg {
enum pios_mpu6000_range gyro_range;
enum pios_mpu6000_filter filter;
enum pios_mpu6000_orientation orientation;
#ifdef PIOS_INCLUDE_SPI
SPIPrescalerTypeDef fast_prescaler;
SPIPrescalerTypeDef std_prescaler;
#endif /* PIOS_INCLUDE_SPI */
uint8_t max_downsample;
};

4
flight/pios/inc/pios_mpu9250.h
View File

@ -33,6 +33,8 @@
#define PIOS_MPU9250_H
#include <pios_sensors.h>
#ifdef PIOS_INCLUDE_MPU9250
/* MPU9250 Addresses */
#define PIOS_MPU9250_SMPLRT_DIV_REG 0X19
#define PIOS_MPU9250_DLPF_CFG_REG 0X1A
@ -247,6 +249,8 @@ extern bool PIOS_MPU9250_IRQHandler(void);
extern const PIOS_SENSORS_Driver PIOS_MPU9250_Main_Driver;
extern const PIOS_SENSORS_Driver PIOS_MPU9250_Mag_Driver;
#endif /* PIOS_INCLUDE_MPU9250 */
#endif /* PIOS_MPU9250_H */
/**

2
flight/pios/stm32f30x/library.mk
View File

@ -5,6 +5,8 @@
# Directory containing this makefile
PIOS_DEVLIB := $(dir $(lastword $(MAKEFILE_LIST)))
MCU := cortex-m4
USE_USB ?= YES
LDSRC = $(PIOS_DEVLIB)link_memory.lds $(PIOS_DEVLIB)link_sections.lds

24
flight/targets/boards/pikoblx/board-info.mk Normal file
View File

@ -0,0 +1,24 @@
BOARD_TYPE := 0x10
BOARD_REVISION := 0x05
BOOTLOADER_VERSION := 0x04
HW_TYPE := 0x01
CHIP := STM32F303xC
OPENOCD_JTAG_CONFIG := foss-jtag.revb.cfg
OPENOCD_CONFIG := stm32f1x.cfg
# Note: These must match the values in link_$(BOARD)_memory.ld
BL_BANK_BASE := 0x08000000 # Start of bootloader flash
BL_BANK_SIZE := 0x00004000 # Should include BD_INFO region
# Some KB for settings storage (32kb)
EE_BANK_BASE := 0x08004000 # EEPROM storage area
EE_BANK_SIZE := 0x00008000 # EEPROM storage size
FW_BANK_BASE := 0x0800C000 # Start of firmware flash
FW_BANK_SIZE := 0x00034000 # Should include FW_DESC_SIZE (208kB)
FW_DESC_SIZE := 0x00000064
OSCILLATOR_FREQ := 8000000

565
flight/targets/boards/pikoblx/board_hw_defs.c Normal file
View File

@ -0,0 +1,565 @@
/**
******************************************************************************
* @file board_hw_defs.c
* @author The LibrePilot Project, http://www.librepilot.org Copyright (C) 2015.
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
* PhoenixPilot, http://github.com/PhoenixPilot, Copyright (C) 2012
*
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
* @brief Defines board specific static initializers for hardware for the CopterControl board.
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(PIOS_INCLUDE_LED)
#include <pios_led_priv.h>
static const struct pios_gpio pios_leds[] = {
[PIOS_LED_HEARTBEAT] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.active_low = true
},
[PIOS_LED_ALARM] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.active_low = true
},
[PIOS_LED_BUZZER] = { /* not really LED, but buzzer! */
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.active_low = false
},
};
static const struct pios_gpio_cfg pios_led_cfg = {
.gpios = pios_leds,
.num_gpios = NELEMENTS(pios_leds),
};
const struct pios_gpio_cfg *PIOS_BOARD_HW_DEFS_GetLedCfg(__attribute__((unused)) uint32_t board_revision)
{
return &pios_led_cfg;
}
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* Gyro interface */
static const struct pios_spi_cfg pios_spi_mpu6000_cfg = {
.regs = SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16, /* 10 Mhz */
},
.use_crc = false,
.remap = GPIO_AF_5,
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.slave_count = 1,
.ssel = {
{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
}
},
};
uint32_t pios_spi_mpu6000_id;
#endif /* PIOS_INCLUDE_SPI */
#if defined(PIOS_INCLUDE_FLASH)
#include "pios_flashfs_logfs_priv.h"
#include "pios_flash_jedec_priv.h"
#include "pios_flash_internal_priv.h"
static const struct pios_flash_internal_cfg flash_internal_system_cfg = {};
static const struct flashfs_logfs_cfg flashfs_internal_cfg = {
.fs_magic = 0x99abcfef,
.total_fs_size = EE_BANK_SIZE, /* 32K bytes (16x2KB sectors) */
.arena_size = 0x00004000, /* 64 * slot size = 16K bytes = 8 sectors */
.slot_size = 0x00000100, /* 256 bytes */
.start_offset = EE_BANK_BASE, /* start after the bootloader */
.sector_size = 0x00000800, /* 2K bytes */
.page_size = 0x00000800, /* 2K bytes */
};
#endif /* PIOS_INCLUDE_FLASH */
#include "pios_tim_priv.h"
static const TIM_TimeBaseInitTypeDef tim_time_base = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = ((1000000 / PIOS_SERVO_UPDATE_HZ) - 1),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_1_cfg = {
.timer = TIM1,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_2_cfg = {
.timer = TIM2,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_3_cfg = {
.timer = TIM3,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_4_cfg = {
.timer = TIM4,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_8_cfg = {
.timer = TIM8,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM8_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_15_cfg = {
.timer = TIM4,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_BRK_TIM15_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_16_cfg = {
.timer = TIM4,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_UP_TIM16_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_17_cfg = {
.timer = TIM4,
.time_base_init = &tim_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_TRG_COM_TIM17_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
#include <pios_servo_config.h>
#define GPIO_AF_PA1_TIM2 GPIO_AF_1
#define GPIO_AF_PA0_TIM2 GPIO_AF_1
#define GPIO_AF_PA8_TIM1 GPIO_AF_6
#define GPIO_AF_PA2_TIM2 GPIO_AF_1
#define GPIO_AF_PB6_TIM4 GPIO_AF_2
#define GPIO_AF_PB5_TIM3 GPIO_AF_2
#define GPIO_AF_PB0_TIM3 GPIO_AF_2
#define GPIO_AF_PB1_TIM3 GPIO_AF_2
#define GPIO_AF_PB9_TIM4 GPIO_AF_2
#define GPIO_AF_PB8_TIM4 GPIO_AF_2
#define GPIO_AF_PB7_TIM4 GPIO_AF_2
#define GPIO_AF_PB4_TIM3 GPIO_AF_2
#define GPIO_AF_PB11_TIM2 GPIO_AF_1
#define GPIO_AF_PA15_TIM8 GPIO_AF_2
#define GPIO_AF_PA3_TIM15 GPIO_AF_9
#define GPIO_AF_PA6_TIM3 GPIO_AF_2
#define GPIO_AF_PA7_TIM3 GPIO_AF_2
#define GPIO_AF_PA10_TIM2 GPIO_AF_10
#define GPIO_AF_PA4_TIM3 GPIO_AF_2
#define GPIO_AF_PA7_TIM17 GPIO_AF_1
#define GPIO_AF_PB8_TIM16 GPIO_AF_1
#define TIM1_CH1_DMA_INSTANCE 1
#define TIM1_CH1_DMA_CHANNEL 2
#define TIM16_CH1_DMA_INSTANCE 2
#define TIM16_CH1_DMA_CHANNEL 3
static const struct pios_tim_channel pios_tim_servoport_pins[] = {
TIM_SERVO_CHANNEL_CONFIG(TIM3, 2, A, 4), // bank 1
TIM_SERVO_CHANNEL_CONFIG(TIM3, 1, A, 6), // bank 1
TIM_SERVO_CHANNEL_CONFIG(TIM3, 3, B, 0), // bank 1
TIM_SERVO_CHANNEL_CONFIG(TIM3, 4, B, 1), // bank 1
TIM_SERVO_CHANNEL_CONFIG(TIM2, 2, A, 1), // bank 2
TIM_SERVO_CHANNEL_CONFIG(TIM2, 3, A, 2), // bank 2
TIM_SERVO_CHANNEL_CONFIG(TIM15, 2, A, 3), // bank 3
TIM_SERVO_CHANNEL_CONFIG(TIM1, 1, A, 8), // transponder (bank 4)
};
#if defined(PIOS_INCLUDE_USART)
#define GPIO_AF_USART1 GPIO_AF_7
#define GPIO_AF_USART2 GPIO_AF_7
#define GPIO_AF_USART3 GPIO_AF_7
#include "pios_usart_priv.h"
#include "pios_usart_config.h"
static const struct pios_usart_cfg pios_usart_cfg[] = {
USART_CONFIG(USART1, B, 7, B, 6),
USART_CONFIG(USART2, B, 4, B, 3),
USART_CONFIG(USART3, B, 11, B, 10),
};
#endif /* PIOS_INCLUDE_USART */
#if defined(PIOS_INCLUDE_COM)
#include "pios_com_priv.h"
#endif /* PIOS_INCLUDE_COM */
#if defined(PIOS_INCLUDE_RTC)
/*
* Realtime Clock (RTC)
*/
#include <pios_rtc_priv.h>
void PIOS_RTC_IRQ_Handler(void);
void RTC_WKUP_IRQHandler() __attribute__((alias("PIOS_RTC_IRQ_Handler")));
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
.clksrc = RCC_RTCCLKSource_HSE_Div32,
.prescaler = 25 - 1, // 8Mhz / 32 / 16 / 25 => 625Hz
.irq = {
.init = {
.NVIC_IRQChannel = RTC_WKUP_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
void PIOS_RTC_IRQ_Handler(void)
{
PIOS_RTC_irq_handler();
}
#endif /* if defined(PIOS_INCLUDE_RTC) */
#if defined(PIOS_INCLUDE_SERVO) && defined(PIOS_INCLUDE_TIM)
/*
* Servo outputs
*/
#include <pios_servo_priv.h>
const struct pios_servo_cfg pios_servo_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_servoport_pins,
.num_channels = NELEMENTS(pios_tim_servoport_pins),
};
#endif /* PIOS_INCLUDE_SERVO && PIOS_INCLUDE_TIM */
/*
* PPM Inputs
*/
#if defined(PIOS_INCLUDE_PPM)
#include <pios_ppm_priv.h>
static const struct pios_tim_channel pios_tim_ppm = TIM_SERVO_CHANNEL_CONFIG(TIM17, 1, A, 7);
const struct pios_ppm_cfg pios_ppm_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
.channels = &pios_tim_ppm,
.num_channels = 1,
};
#endif /* PIOS_INCLUDE_PPM */
#if defined(PIOS_INCLUDE_RCVR)
#include "pios_rcvr_priv.h"
#endif /* PIOS_INCLUDE_RCVR */
#if defined(PIOS_INCLUDE_USB)
#include "pios_usb_priv.h"
static const struct pios_usb_cfg pios_usb_main_cfg = {
.irq = {
.init = {
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
const struct pios_usb_cfg *PIOS_BOARD_HW_DEFS_GetUsbCfg(__attribute__((unused)) uint32_t board_revision)
{
return &pios_usb_main_cfg;
}
#endif /* PIOS_INCLUDE_USB */
#if defined(PIOS_INCLUDE_WS2811)
#include "pios_ws2811_cfg.h"
static const struct pios_ws2811_cfg pios_ws2811_cfg = PIOS_WS2811_CONFIG(TIM16, 1, B, 8);
void DMA1_Channel2_IRQHandler()
{
PIOS_WS2811_DMA_irq_handler();
}
#endif /* PIOS_INCLUDE_WS2811 */
#if defined(PIOS_INCLUDE_ADC)
#include "pios_adc_priv.h"
void PIOS_ADC_DMC_irq_handler(void);
void DMA2_Channel1_IRQHandler(void) __attribute__((alias("PIOS_ADC_DMC_irq_handler")));
struct pios_adc_cfg pios_adc_cfg = {
.adc_dev = ADC2,
.dma = {
.irq = {
.flags = (DMA2_FLAG_TC1 | DMA2_FLAG_TE1 | DMA2_FLAG_HT1),
.init = {
.NVIC_IRQChannel = DMA2_Channel1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA2_Channel1,
}
},
.half_flag = DMA2_FLAG_HT1,
.full_flag = DMA2_FLAG_TC1,
};
void PIOS_ADC_DMC_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_ADC_DMA_Handler();
}
const struct pios_adc_cfg *PIOS_BOARD_HW_DEFS_GetAdcCfg(__attribute__((unused)) uint32_t board_revision)
{
return &pios_adc_cfg;
}
#endif /* if defined(PIOS_INCLUDE_ADC) */
/**
* Configuration for MPU6000 chip
*/
#if defined(PIOS_INCLUDE_MPU6000)
#include "pios_mpu6000.h"
static const struct pios_exti_cfg pios_exti_mpu6000_cfg __exti_config = {
.vector = PIOS_MPU6000_IRQHandler,
.line = EXTI_Line15,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI15_10_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line15, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_mpu6000_cfg pios_mpu6000_cfg = {
.exti_cfg = &pios_exti_mpu6000_cfg,
.Fifo_store = PIOS_MPU6000_FIFO_TEMP_OUT | PIOS_MPU6000_FIFO_GYRO_X_OUT | PIOS_MPU6000_FIFO_GYRO_Y_OUT | PIOS_MPU6000_FIFO_GYRO_Z_OUT,
// Clock at 8 khz, downsampled by 8 for 1000 Hz
.Smpl_rate_div_no_dlp = 7,
// Clock at 1 khz, downsampled by 1 for 1000 Hz
.Smpl_rate_div_dlp = 0,
.interrupt_cfg = PIOS_MPU6000_INT_CLR_ANYRD,
.interrupt_en = PIOS_MPU6000_INTEN_DATA_RDY,
.User_ctl = PIOS_MPU6000_USERCTL_DIS_I2C,
.Pwr_mgmt_clk = PIOS_MPU6000_PWRMGMT_PLL_X_CLK,
.accel_range = PIOS_MPU6000_ACCEL_8G,
.gyro_range = PIOS_MPU6000_SCALE_2000_DEG,
.filter = PIOS_MPU6000_LOWPASS_256_HZ,
.orientation = PIOS_MPU6000_TOP_180DEG,
#ifdef PIOS_INCLUDE_SPI
.fast_prescaler = PIOS_SPI_PRESCALER_4,
.std_prescaler = PIOS_SPI_PRESCALER_64,
#endif /* PIOS_INCLUDE_SPI */
.max_downsample = 2
};
const struct pios_mpu6000_cfg *PIOS_BOARD_HW_DEFS_GetMPU6000Cfg(__attribute__((unused)) uint32_t board_revision)
{
return &pios_mpu6000_cfg;
}
#endif /* PIOS_INCLUDE_MPU6000 */

29
flight/targets/boards/pikoblx/bootloader/Makefile Normal file
View File

@ -0,0 +1,29 @@
#
# Copyright (c) 2015, The LibrePilot Project, http://www.librepilot.org
# Copyright (c) 2009-2013, The OpenPilot Team, http://www.openpilot.org
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
ifndef FLIGHT_MAKEFILE
$(error Top level Makefile must be used to build this target)
endif
include ../board-info.mk
include $(FLIGHT_ROOT_DIR)/make/firmware-defs.mk
include $(FLIGHT_ROOT_DIR)/make/boot-defs.mk
include $(FLIGHT_ROOT_DIR)/make/common-defs.mk
$(info Making bootloader for PikoBLX, board revision $(BOARD_REVISION))

115
flight/targets/boards/pikoblx/bootloader/inc/common.h Normal file
View File

@ -0,0 +1,115 @@
/**
******************************************************************************
* @addtogroup CopterControlBL CopterControl BootLoader
* @brief These files contain the code to the CopterControl Bootloader.
*
* @{
* @file common.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief This file contains various common defines for the BootLoader
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef COMMON_H_
#define COMMON_H_
// #include "board.h"
typedef enum {
start, keepgoing,
} DownloadAction;
/**************************************************/
/* OP_DFU states */
/**************************************************/
typedef enum {
DFUidle, // 0
uploading, // 1
wrong_packet_received, // 2
too_many_packets, // 3
too_few_packets, // 4
Last_operation_Success, // 5
downloading, // 6
BLidle, // 7
Last_operation_failed, // 8
uploadingStarting, // 9
outsideDevCapabilities, // 10
CRC_Fail, // 11
failed_jump,
// 12
} DFUStates;
/**************************************************/
/* OP_DFU commands */
/**************************************************/
typedef enum {
Reserved, // 0
Req_Capabilities, // 1
Rep_Capabilities, // 2
EnterDFU, // 3
JumpFW, // 4
Reset, // 5
Abort_Operation, // 6
Upload, // 7
Op_END, // 8
Download_Req, // 9
Download, // 10
Status_Request, // 11
Status_Rep
// 12
} DFUCommands;
typedef enum {
High_Density, Medium_Density
} DeviceType;
/**************************************************/
/* OP_DFU transfer types */
/**************************************************/
typedef enum {
FW, // 0
Descript
// 2
} DFUTransfer;
/**************************************************/
/* OP_DFU transfer port */
/**************************************************/
typedef enum {
Usb, // 0
Serial
// 2
} DFUPort;
/**************************************************/
/* OP_DFU programable programable HW types */
/**************************************************/
typedef enum {
Self_flash, // 0
Remote_flash_via_spi
// 1
} DFUProgType;
/**************************************************/
/* OP_DFU programable sources */
/**************************************************/
#define USB 0
#define SPI 1
#define DownloadDelay 100000
#define MAX_DEL_RETRYS 3
#define MAX_WRI_RETRYS 3
#endif /* COMMON_H_ */

53
flight/targets/boards/pikoblx/bootloader/inc/pios_config.h Normal file
View File

@ -0,0 +1,53 @@
/**
******************************************************************************
* @addtogroup CopterControlBL CopterControl BootLoader
* @brief These files contain the code to the CopterControl Bootloader.
* @{
* @file pios_config.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief PiOS configuration header.
* Central compile time config for the project.
* In particular, pios_config.h is where you define which PiOS libraries
* and features are included in the firmware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_CONFIG_H
#define PIOS_CONFIG_H
/* Enable/Disable PiOS modules */
#define PIOS_INCLUDE_DELAY
#define PIOS_INCLUDE_SYS
#define PIOS_INCLUDE_IRQ
#define PIOS_INCLUDE_GPIO
#define PIOS_INCLUDE_USB
#define PIOS_INCLUDE_USB_HID
#define PIOS_INCLUDE_LED
#define PIOS_INCLUDE_IAP
#define PIOS_INCLUDE_COM
#define PIOS_INCLUDE_COM_MSG
#define PIOS_INCLUDE_BL_HELPER
#define PIOS_INCLUDE_BL_HELPER_WRITE_SUPPORT
#endif /* PIOS_CONFIG_H */
/**
* @}
* @}
*/

53
flight/targets/boards/pikoblx/bootloader/inc/pios_usb_board_data.h Normal file
View File

@ -0,0 +1,53 @@
/**
******************************************************************************
* @addtogroup PIOS PIOS Core hardware abstraction layer
* @{
* @addtogroup PIOS_USB_BOARD Board specific USB definitions
* @brief Board specific USB definitions
* @{
*
* @file pios_usb_board_data.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Board specific USB definitions
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_USB_BOARD_DATA_H
#define PIOS_USB_BOARD_DATA_H
// Note : changing below length will require changes to the USB buffer setup
#define PIOS_USB_BOARD_HID_DATA_LENGTH 64
#define PIOS_USB_BOARD_EP_NUM 2
#include <pios_usb_defs.h> /* struct usb_* */
#define PIOS_USB_BOARD_PRODUCT_ID USB_PRODUCT_ID_COPTERCONTROL
#define PIOS_USB_BOARD_DEVICE_VER USB_OP_DEVICE_VER(USB_OP_BOARD_ID_COPTERCONTROL, USB_OP_BOARD_MODE_BL)
#define PIOS_USB_BOARD_SN_SUFFIX "+BL"
/*
* The bootloader uses a simplified report structure
* BL: <REPORT_ID><DATA>...<DATA>
* FW: <REPORT_ID><LENGTH><DATA>...<DATA>
* This define changes the behaviour in pios_usb_hid.c
*/
#define PIOS_USB_BOARD_BL_HID_HAS_NO_LENGTH_BYTE
#endif /* PIOS_USB_BOARD_DATA_H */

230
flight/targets/boards/pikoblx/bootloader/main.c Normal file
View File

@ -0,0 +1,230 @@
/**
******************************************************************************
* @addtogroup CopterControlBL CopterControl BootLoader
* @brief These files contain the code to the CopterControl Bootloader.
*
* @{
* @file main.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief This is the file with the main function of the OpenPilot BootLoader
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <pios.h>
#include <pios_board_info.h>
#include <op_dfu.h>
#include <usb_lib.h>
#include <pios_iap.h>
#include <fifo_buffer.h>
#include <pios_com_msg.h>
#include <pios_board_init.h>
#include <pios_board_io.h>
extern void FLASH_Download();
#define BSL_HOLD_STATE ((PIOS_USB_DETECT_GPIO_PORT->IDR & PIOS_USB_DETECT_GPIO_PIN) ? 0 : 1)
/* Private typedef -----------------------------------------------------------*/
typedef void (*pFunction)(void);
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
pFunction Jump_To_Application;
uint32_t JumpAddress;
/// LEDs PWM
uint32_t period1 = 5000; // 5 mS
uint32_t sweep_steps1 = 100; // * 5 mS -> 500 mS
uint32_t period2 = 5000; // 5 mS
uint32_t sweep_steps2 = 100; // * 5 mS -> 500 mS
////////////////////////////////////////
uint8_t tempcount = 0;
/* Extern variables ----------------------------------------------------------*/
DFUStates DeviceState;
int16_t status = 0;
uint8_t JumpToApp = FALSE;
uint8_t GO_dfu = FALSE;
uint8_t USB_connected = FALSE;
uint8_t User_DFU_request = FALSE;
static uint8_t mReceive_Buffer[63];
/* Private function prototypes -----------------------------------------------*/
uint32_t LedPWM(uint32_t pwm_period, uint32_t pwm_sweep_steps, uint32_t count);
uint8_t processRX();
void jump_to_app();
int main()
{
PIOS_SYS_Init();
PIOS_Board_Init();
PIOS_IAP_Init();
USB_connected = PIOS_USB_CableConnected(0);
if (PIOS_IAP_CheckRequest() == TRUE) {
PIOS_DELAY_WaitmS(1000);
User_DFU_request = TRUE;
PIOS_IAP_ClearRequest();
}
GO_dfu = (USB_connected == TRUE) || (User_DFU_request == TRUE);
if (GO_dfu == TRUE) {
PIOS_Board_Init();
if (User_DFU_request == TRUE) {
DeviceState = DFUidle;
} else {
DeviceState = BLidle;
}
} else {
JumpToApp = TRUE;
}
uint32_t stopwatch = 0;
uint32_t prev_ticks = PIOS_DELAY_GetuS();
while (TRUE) {
/* Update the stopwatch */
uint32_t elapsed_ticks = PIOS_DELAY_GetuSSince(prev_ticks);
prev_ticks += elapsed_ticks;
stopwatch += elapsed_ticks;
if (JumpToApp == TRUE) {
jump_to_app();
}
switch (DeviceState) {
case Last_operation_Success:
case uploadingStarting:
case DFUidle:
period1 = 5000;
sweep_steps1 = 100;
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
period2 = 0;
break;
case uploading:
period1 = 5000;
sweep_steps1 = 100;
period2 = 2500;
sweep_steps2 = 50;
break;
case downloading:
period1 = 2500;
sweep_steps1 = 50;
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
period2 = 0;
break;
case BLidle:
period1 = 0;
PIOS_LED_On(PIOS_LED_HEARTBEAT);
period2 = 0;
break;
default: // error
period1 = 5000;
sweep_steps1 = 100;
period2 = 5000;
sweep_steps2 = 100;
}
if (period1 != 0) {
if (LedPWM(period1, sweep_steps1, stopwatch)) {
PIOS_LED_On(PIOS_LED_HEARTBEAT);
} else {
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
}
} else {
PIOS_LED_On(PIOS_LED_HEARTBEAT);
}
if (period2 != 0) {
if (LedPWM(period2, sweep_steps2, stopwatch)) {
PIOS_LED_On(PIOS_LED_HEARTBEAT);
} else {
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
}
} else {
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
}
if (stopwatch > 50 * 1000 * 1000) {
stopwatch = 0;
}
if ((stopwatch > 6 * 1000 * 1000) && ((DeviceState == BLidle) /*|| (DeviceState == DFUidle && !USB_connected)*/)) {
JumpToApp = TRUE;
}
processRX();
DataDownload(start);
}
}
void jump_to_app()
{
const struct pios_board_info *bdinfo = &pios_board_info_blob;
uint32_t fwIrqStackBase = (*(__IO uint32_t *)bdinfo->fw_base) & 0xFFFE0000;
// Check for the two possible irqstack locations (sram or core coupled sram)
if (fwIrqStackBase == 0x20000000 || fwIrqStackBase == 0x10000000) {
/* Jump to user application */
FLASH_Lock();
RCC_APB2PeriphResetCmd(0xffffffff, ENABLE);
RCC_APB1PeriphResetCmd(0xffffffff, ENABLE);
RCC_APB2PeriphResetCmd(0xffffffff, DISABLE);
RCC_APB1PeriphResetCmd(0xffffffff, DISABLE);
_SetCNTR(0); // clear interrupt mask
_SetISTR(0); // clear all requests
JumpAddress = *(__IO uint32_t *)(bdinfo->fw_base + 4);
Jump_To_Application = (pFunction)JumpAddress;
/* Initialize user application's Stack Pointer */
__set_MSP(*(__IO uint32_t *)bdinfo->fw_base);
Jump_To_Application();
} else {
DeviceState = failed_jump;
JumpToApp = FALSE;
return;
}
}
uint32_t LedPWM(uint32_t pwm_period, uint32_t pwm_sweep_steps, uint32_t count)
{
uint32_t curr_step = (count / pwm_period) % pwm_sweep_steps; /* 0 - pwm_sweep_steps */
uint32_t pwm_duty = pwm_period * curr_step / pwm_sweep_steps; /* fraction of pwm_period */
uint32_t curr_sweep = (count / (pwm_period * pwm_sweep_steps)); /* ticks once per full sweep */
if (curr_sweep & 1) {
pwm_duty = pwm_period - pwm_duty; /* reverse direction in odd sweeps */
}
return ((count % pwm_period) > pwm_duty) ? 1 : 0;
}
uint8_t processRX()
{
if (PIOS_COM_MSG_Receive(PIOS_COM_TELEM_USB, mReceive_Buffer, sizeof(mReceive_Buffer))) {
processComand(mReceive_Buffer);
}
return TRUE;
}
int32_t platform_senddata(const uint8_t *msg, uint16_t msg_len)
{
return PIOS_COM_MSG_Send(PIOS_COM_TELEM_USB, msg, msg_len);
}

100
flight/targets/boards/pikoblx/bootloader/pios_board.c Normal file
View File

@ -0,0 +1,100 @@
/**
******************************************************************************
*
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board specific static initializers for hardware for the CopterControl board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <pios.h>
#include <pios_board_info.h>
#include <pios_board_io.h>
#include "pios_usb_board_data_priv.h"
#include "pios_usb_desc_hid_cdc_priv.h"
#include "pios_usb_desc_hid_only_priv.h"
#include "pios_usbhook.h"
#include <pios_com_msg_priv.h>
/*
* Pull in the board-specific static HW definitions.
* Including .c files is a bit ugly but this allows all of
* the HW definitions to be const and static to limit their
* scope.
*
* NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
*/
#include "../board_hw_defs.c"
uint32_t pios_com_telem_usb_id;
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
static bool board_init_complete = false;
void PIOS_Board_Init(void)
{
if (board_init_complete) {
return;
}
/* Enable Prefetch Buffer */
FLASH_PrefetchBufferCmd(ENABLE);
/* Flash 2 wait state */
FLASH_SetLatency(FLASH_Latency_2);
#if defined(PIOS_INCLUDE_LED)
PIOS_LED_Init(&pios_led_cfg);
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Activate the HID-only USB configuration */
PIOS_USB_DESC_HID_ONLY_Init();
uint32_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg);
#if defined(PIOS_INCLUDE_USB_HID) && defined(PIOS_INCLUDE_COM_MSG)
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_only_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
if (PIOS_COM_MSG_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id)) {
PIOS_Assert(0);
}
#endif /* PIOS_INCLUDE_USB_HID && PIOS_INCLUDE_COM_MSG */
#endif /* PIOS_INCLUDE_USB */
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_CRC, ENABLE); // TODO Tirar
board_init_complete = true;
}
void PIOS_ADC_DMA_Handler()
{}

117
flight/targets/boards/pikoblx/firmware/Makefile Normal file
View File

@ -0,0 +1,117 @@
#
# Copyright (C) 2015-2016, The LibrePilot Project, http://www.librepilot.org
# Copyright (C) 2009-2013, The OpenPilot Team, http://www.openpilot.org
# Copyright (C) 2012, PhoenixPilot, http://github.com/PhoenixPilot
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#####
ifndef FLIGHT_MAKEFILE
$(error Top level Makefile must be used to build this target)
endif
include ../board-info.mk
include $(FLIGHT_ROOT_DIR)/make/firmware-defs.mk
# REVO C++ support
USE_CXX = YES
# ARM DSP library
USE_DSP_LIB ?= NO
DEBUG = NO
# List of mandatory modules to include
MODULES += Sensors
MODULES += StateEstimation
MODULES += Stabilization
MODULES += ManualControl
MODULES += Receiver
MODULES += Actuator
MODULES += FirmwareIAP
#MODULES += PathPlanner
#MODULES += PathFollower
#MODULES += Osd/osdoutout
#MODULES += Logging
MODULES += Telemetry
MODULES += Notify
OPTMODULES += Airspeed
OPTMODULES += AutoTune
OPTMODULES += GPS
OPTMODULES += TxPID
OPTMODULES += CameraStab
OPTMODULES += CameraControl
OPTMODULES += Battery
OPTMODULES += ComUsbBridge
OPTMODULES += UAVOMSPBridge
OPTMODULES += UAVOMavlinkBridge
SRC += $(FLIGHTLIB)/notification.c
# Include all camera options
CDEFS += -DUSE_INPUT_LPF -DUSE_GIMBAL_LPF -DUSE_GIMBAL_FF
# Some diagnostics
CDEFS += -DDIAG_TASKS
# Misc options
CFLAGS += -ffast-math
# List C source files here (C dependencies are automatically generated).
# Use file-extension c for "c-only"-files
ifndef TESTAPP
## Application Core
SRC += ../pios_usb_board_data.c
SRC += $(OPMODULEDIR)/System/systemmod.c
CPPSRC += $(OPSYSTEM)/main.cpp
SRC += $(OPSYSTEM)/pios_board.c
SRC += $(FLIGHTLIB)/alarms.c
SRC += $(OPUAVTALK)/uavtalk.c
SRC += $(OPUAVOBJ)/uavobjectmanager.c
SRC += $(OPUAVOBJ)/uavobjectpersistence.c
SRC += $(OPUAVOBJ)/eventdispatcher.c
SRC += $(PIOSCOMMON)/pios_flashfs_logfs.c
SRC += $(PIOSCOMMON)/pios_flash_jedec.c
#ifeq ($(DEBUG), YES)
SRC += $(OPSYSTEM)/dcc_stdio.c
SRC += $(OPSYSTEM)/cm3_fault_handlers.c
#endif
## Misc library functions
SRC += $(FLIGHTLIB)/instrumentation.c
SRC += $(FLIGHTLIB)/paths.c
SRC += $(FLIGHTLIB)/plans.c
SRC += $(FLIGHTLIB)/WorldMagModel.c
SRC += $(FLIGHTLIB)/insgps13state.c
SRC += $(FLIGHTLIB)/auxmagsupport.c
SRC += $(FLIGHTLIB)/lednotification.c
## UAVObjects
include ./UAVObjects.inc
SRC += $(UAVOBJSRC)
else
## Test Code
SRC += $(OPTESTS)/test_common.c
SRC += $(OPTESTS)/$(TESTAPP).c
endif
# Optional component libraries
#include $(FLIGHTLIB)/rscode/library.mk
#include $(FLIGHTLIB)/PyMite/pymite.mk
include $(FLIGHT_ROOT_DIR)/make/apps-defs.mk
include $(FLIGHT_ROOT_DIR)/make/common-defs.mk

136
flight/targets/boards/pikoblx/firmware/UAVObjects.inc Normal file
View File

@ -0,0 +1,136 @@
#
# Copyright (C) 2016, The LibrePilot Project, http://www.librepilot.org
# Copyright (C) 2009-2013, The OpenPilot Team, http://www.openpilot.org
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# These are the UAVObjects supposed to be build as part of the OpenPilot target
# (all architectures)
UAVOBJSRCFILENAMES =
UAVOBJSRCFILENAMES += statusgrounddrive
UAVOBJSRCFILENAMES += pidstatus
UAVOBJSRCFILENAMES += statusvtolland
UAVOBJSRCFILENAMES += statusvtolautotakeoff
UAVOBJSRCFILENAMES += vtolselftuningstats
UAVOBJSRCFILENAMES += accelgyrosettings
UAVOBJSRCFILENAMES += accessorydesired
UAVOBJSRCFILENAMES += actuatorcommand
UAVOBJSRCFILENAMES += actuatordesired
UAVOBJSRCFILENAMES += actuatorsettings
UAVOBJSRCFILENAMES += attitudesettings
UAVOBJSRCFILENAMES += attitudestate
UAVOBJSRCFILENAMES += gyrostate
UAVOBJSRCFILENAMES += gyrosensor
UAVOBJSRCFILENAMES += accelstate
UAVOBJSRCFILENAMES += accelsensor
UAVOBJSRCFILENAMES += magsensor
UAVOBJSRCFILENAMES += auxmagsensor
UAVOBJSRCFILENAMES += auxmagsettings
UAVOBJSRCFILENAMES += magstate
UAVOBJSRCFILENAMES += barosensor
UAVOBJSRCFILENAMES += airspeedsensor
UAVOBJSRCFILENAMES += airspeedsettings
UAVOBJSRCFILENAMES += airspeedstate
UAVOBJSRCFILENAMES += debuglogsettings
UAVOBJSRCFILENAMES += debuglogcontrol
UAVOBJSRCFILENAMES += debuglogstatus
UAVOBJSRCFILENAMES += debuglogentry
UAVOBJSRCFILENAMES += flightbatterysettings
UAVOBJSRCFILENAMES += firmwareiapobj
UAVOBJSRCFILENAMES += flightbatterystate
UAVOBJSRCFILENAMES += flightplancontrol
UAVOBJSRCFILENAMES += flightplansettings
UAVOBJSRCFILENAMES += flightplanstatus
UAVOBJSRCFILENAMES += flighttelemetrystats
UAVOBJSRCFILENAMES += gcstelemetrystats
UAVOBJSRCFILENAMES += gcsreceiver
UAVOBJSRCFILENAMES += gpspositionsensor
UAVOBJSRCFILENAMES += gpssatellites
UAVOBJSRCFILENAMES += gpstime
UAVOBJSRCFILENAMES += gpsvelocitysensor
UAVOBJSRCFILENAMES += gpssettings
UAVOBJSRCFILENAMES += gpsextendedstatus
UAVOBJSRCFILENAMES += fixedwingpathfollowersettings
UAVOBJSRCFILENAMES += fixedwingpathfollowerstatus
UAVOBJSRCFILENAMES += vtolpathfollowersettings
UAVOBJSRCFILENAMES += groundpathfollowersettings
UAVOBJSRCFILENAMES += homelocation
UAVOBJSRCFILENAMES += i2cstats
UAVOBJSRCFILENAMES += manualcontrolcommand
UAVOBJSRCFILENAMES += manualcontrolsettings
UAVOBJSRCFILENAMES += flightmodesettings
UAVOBJSRCFILENAMES += mixersettings
UAVOBJSRCFILENAMES += mixerstatus
UAVOBJSRCFILENAMES += nedaccel
UAVOBJSRCFILENAMES += objectpersistence
UAVOBJSRCFILENAMES += oplinkreceiver
UAVOBJSRCFILENAMES += overosyncstats
UAVOBJSRCFILENAMES += overosyncsettings
UAVOBJSRCFILENAMES += pathaction
UAVOBJSRCFILENAMES += pathdesired
UAVOBJSRCFILENAMES += pathplan
UAVOBJSRCFILENAMES += pathstatus
UAVOBJSRCFILENAMES += pathsummary
UAVOBJSRCFILENAMES += positionstate
UAVOBJSRCFILENAMES += ratedesired
UAVOBJSRCFILENAMES += ekfconfiguration
UAVOBJSRCFILENAMES += ekfstatevariance
UAVOBJSRCFILENAMES += revocalibration
UAVOBJSRCFILENAMES += revosettings
UAVOBJSRCFILENAMES += sonaraltitude
UAVOBJSRCFILENAMES += stabilizationdesired
UAVOBJSRCFILENAMES += stabilizationsettings
UAVOBJSRCFILENAMES += stabilizationsettingsbank1
UAVOBJSRCFILENAMES += stabilizationsettingsbank2
UAVOBJSRCFILENAMES += stabilizationsettingsbank3
UAVOBJSRCFILENAMES += stabilizationstatus
UAVOBJSRCFILENAMES += stabilizationbank
UAVOBJSRCFILENAMES += systemalarms
UAVOBJSRCFILENAMES += systemsettings
UAVOBJSRCFILENAMES += systemstats
UAVOBJSRCFILENAMES += taskinfo
UAVOBJSRCFILENAMES += callbackinfo
UAVOBJSRCFILENAMES += velocitystate
UAVOBJSRCFILENAMES += velocitydesired
UAVOBJSRCFILENAMES += watchdogstatus
UAVOBJSRCFILENAMES += flightstatus
UAVOBJSRCFILENAMES += hwsettings
UAVOBJSRCFILENAMES += hwpikoblxsettings
UAVOBJSRCFILENAMES += receiveractivity
UAVOBJSRCFILENAMES += receiverstatus
UAVOBJSRCFILENAMES += cameradesired
UAVOBJSRCFILENAMES += camerastabsettings
UAVOBJSRCFILENAMES += altitudeholdsettings
UAVOBJSRCFILENAMES += oplinksettings
UAVOBJSRCFILENAMES += oplinkstatus
UAVOBJSRCFILENAMES += altitudefiltersettings
UAVOBJSRCFILENAMES += altitudeholdstatus
UAVOBJSRCFILENAMES += waypoint
UAVOBJSRCFILENAMES += waypointactive
UAVOBJSRCFILENAMES += poilocation
UAVOBJSRCFILENAMES += poilearnsettings
UAVOBJSRCFILENAMES += mpugyroaccelsettings
UAVOBJSRCFILENAMES += txpidsettings
UAVOBJSRCFILENAMES += txpidstatus
UAVOBJSRCFILENAMES += takeofflocation
UAVOBJSRCFILENAMES += perfcounter
UAVOBJSRCFILENAMES += systemidentsettings
UAVOBJSRCFILENAMES += systemidentstate
UAVOBJSRCFILENAMES += cameracontrolsettings
UAVOBJSRCFILENAMES += cameracontrolactivity
UAVOBJSRC = $(foreach UAVOBJSRCFILE,$(UAVOBJSRCFILENAMES),$(FLIGHT_UAVOBJ_DIR)/$(UAVOBJSRCFILE).c )
UAVOBJDEFINE = $(foreach UAVOBJSRCFILE,$(UAVOBJSRCFILENAMES),-DUAVOBJ_INIT_$(UAVOBJSRCFILE) )

93
flight/targets/boards/pikoblx/firmware/cm3_fault_handlers.c Normal file
View File

@ -0,0 +1,93 @@
/*
* cm3_fault_handlers.c
*
* Created on: Apr 24, 2011
* Author: msmith
*/
#include <stdint.h>
#include "inc/dcc_stdio.h"
#ifdef STM32F4XX
# include <stm32f4xx.h>
#endif
#ifdef STM32F3
# include <stm32f30x.h>
#endif
#ifdef STM32F2XX
# include <stm32f2xx.h>
#endif
#define FAULT_TRAMPOLINE(_vec) \
__attribute__((naked, no_instrument_function)) \
void \
_vec##_Handler(void) \
{ \
__asm(".syntax unified\n" \
"MOVS R0, #4 \n" \
"MOV R1, LR \n" \
"TST R0, R1 \n" \
"BEQ 1f \n" \
"MRS R0, PSP \n" \
"B " #_vec "_Handler2 \n" \
"1: \n" \
"MRS R0, MSP \n" \
"B " #_vec "_Handler2 \n" \
".syntax divided\n"); \
} \
struct hack
struct cm3_frame {
uint32_t r0;
uint32_t r1;
uint32_t r2;
uint32_t r3;
uint32_t r12;
uint32_t lr;
uint32_t pc;
uint32_t psr;
};
FAULT_TRAMPOLINE(HardFault);
FAULT_TRAMPOLINE(BusFault);
FAULT_TRAMPOLINE(UsageFault);
/* this is a hackaround to avoid an issue where dereferencing SCB seems to result in bad codegen and a link error */
#define SCB_REG(_reg) (*(uint32_t *)&(SCB->_reg))
void HardFault_Handler2(struct cm3_frame *frame)
{
dbg_write_str("\nHARD FAULT");
dbg_write_hex32(frame->pc);
dbg_write_char('\n');
dbg_write_hex32(SCB_REG(HFSR));
dbg_write_char('\n');
for (;;) {
;
}
}
void BusFault_Handler2(struct cm3_frame *frame)
{
dbg_write_str("\nBUS FAULT");
dbg_write_hex32(frame->pc);
dbg_write_char('\n');
dbg_write_hex32(SCB_REG(CFSR));
dbg_write_char('\n');
dbg_write_hex32(SCB_REG(BFAR));
dbg_write_char('\n');
for (;;) {
;
}
}
void UsageFault_Handler2(struct cm3_frame *frame)
{
dbg_write_str("\nUSAGE FAULT");
dbg_write_hex32(frame->pc);
dbg_write_char('\n');
dbg_write_hex32(SCB_REG(CFSR));
dbg_write_char('\n');
for (;;) {
;
}
}

149
flight/targets/boards/pikoblx/firmware/dcc_stdio.c Normal file
View File

@ -0,0 +1,149 @@
/***************************************************************************
* Copyright (C) 2008 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* Copyright (C) 2008 by Frederik Kriewtz *
* frederik@kriewitz.eu *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#include "inc/dcc_stdio.h"
#define TARGET_REQ_TRACEMSG 0x00
#define TARGET_REQ_DEBUGMSG_ASCII 0x01
#define TARGET_REQ_DEBUGMSG_HEXMSG(size) (0x01 | ((size & 0xff) << 8))
#define TARGET_REQ_DEBUGCHAR 0x02
/* we use the cortex_m3 DCRDR reg to simulate a arm7_9 dcc channel
* DCRDR[7:0] is used by target for status
* DCRDR[15:8] is used by target for write buffer
* DCRDR[23:16] is used for by host for status
* DCRDR[31:24] is used for by host for write buffer */
#define NVIC_DBG_DATA_R (*((volatile unsigned short *)0xE000EDF8))
#define BUSY 1
void dbg_write(unsigned long dcc_data)
{
int len = 4;
while (len--) {
/* wait for data ready */
while (NVIC_DBG_DATA_R & BUSY) {
;
}
/* write our data and set write flag - tell host there is data*/
NVIC_DBG_DATA_R = (unsigned short)(((dcc_data & 0xff) << 8) | BUSY);
dcc_data >>= 8;
}
}
void dbg_trace_point(unsigned long number)
{
dbg_write(TARGET_REQ_TRACEMSG | (number << 8));
}
void dbg_write_u32(const unsigned long *val, long len)
{
dbg_write(TARGET_REQ_DEBUGMSG_HEXMSG(4) | ((len & 0xffff) << 16));
while (len > 0) {
dbg_write(*val);
val++;
len--;
}
}
void dbg_write_u16(const unsigned short *val, long len)
{
unsigned long dcc_data;
dbg_write(TARGET_REQ_DEBUGMSG_HEXMSG(2) | ((len & 0xffff) << 16));
while (len > 0) {
dcc_data = val[0]
| ((len > 1) ? val[1] << 16 : 0x0000);
dbg_write(dcc_data);
val += 2;
len -= 2;
}
}
void dbg_write_u8(const unsigned char *val, long len)
{
unsigned long dcc_data;
dbg_write(TARGET_REQ_DEBUGMSG_HEXMSG(1) | ((len & 0xffff) << 16));
while (len > 0) {
dcc_data = val[0]
| ((len > 1) ? val[1] << 8 : 0x00)
| ((len > 2) ? val[2] << 16 : 0x00)
| ((len > 3) ? val[3] << 24 : 0x00);
dbg_write(dcc_data);
val += 4;
len -= 4;
}
}
void dbg_write_str(const char *msg)
{
long len;
unsigned long dcc_data;
for (len = 0; msg[len] && (len < 65536); len++) {
;
}
dbg_write(TARGET_REQ_DEBUGMSG_ASCII | ((len & 0xffff) << 16));
while (len > 0) {
dcc_data = msg[0]
| ((len > 1) ? msg[1] << 8 : 0x00)
| ((len > 2) ? msg[2] << 16 : 0x00)
| ((len > 3) ? msg[3] << 24 : 0x00);
dbg_write(dcc_data);
msg += 4;
len -= 4;
}
}
void dbg_write_char(char msg)
{
dbg_write(TARGET_REQ_DEBUGCHAR | ((msg & 0xff) << 16));
}
void dbg_write_hex32(const unsigned long val)
{
static const char hextab[] = {
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', 'a', 'b', 'c', 'd', 'e', 'f'
};
for (int shift = 28; shift >= 0; shift -= 4) {
dbg_write_char(hextab[(val >> shift) & 0xf]);
}
}

99
flight/targets/boards/pikoblx/firmware/inc/FreeRTOSConfig.h Normal file
View File

@ -0,0 +1,99 @@
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H
/*-----------------------------------------------------------
* Application specific definitions.
*
* These definitions should be adjusted for your particular hardware and
* application requirements.
*
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
*
* See http://www.freertos.org/a00110.html.
*----------------------------------------------------------*/
/**
* @addtogroup PIOS PIOS
* @{
* @addtogroup FreeRTOS FreeRTOS
* @{
*/
/* Notes: We use 5 task priorities */
#define configUSE_PREEMPTION 1
#define configUSE_IDLE_HOOK 1
#define configUSE_TICK_HOOK 0
#define configUSE_MALLOC_FAILED_HOOK 1
#define configCPU_CLOCK_HZ ((unsigned long)72000000)
#define configTICK_RATE_HZ ((portTickType)1000)
#define configMAX_PRIORITIES ((unsigned portBASE_TYPE)5)
#define configMINIMAL_STACK_SIZE ((unsigned short)512)
#define configTOTAL_HEAP_SIZE ((size_t)(53 * 256))
#define configMAX_TASK_NAME_LEN (6)
#define configUSE_TRACE_FACILITY 0
#define configUSE_16_BIT_TICKS 0
#define configIDLE_SHOULD_YIELD 0
#define configUSE_MUTEXES 1
#define configUSE_RECURSIVE_MUTEXES 1
#define configUSE_COUNTING_SEMAPHORES 0
#define configUSE_ALTERNATIVE_API 0
#define configQUEUE_REGISTRY_SIZE 0
/* Co-routine definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES (2)
/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskCleanUpResources 0
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_xTaskGetSchedulerState 0
#define INCLUDE_xTaskGetCurrentTaskHandle 1
#define INCLUDE_uxTaskGetStackHighWaterMark 1
/* This is the raw value as per the Cortex-M3 NVIC. Values can be 255
(lowest) to 1 (highest maskable) to 0 (highest non-maskable). */
#define configKERNEL_INTERRUPT_PRIORITY 15 << 4 /* equivalent to NVIC priority 15 */
#define configMAX_SYSCALL_INTERRUPT_PRIORITY 3 << 4 /* equivalent to NVIC priority 3 */
/* This is the value being used as per the ST library which permits 16
priority values, 0 to 15. This must correspond to the
configKERNEL_INTERRUPT_PRIORITY setting. Here 15 corresponds to the lowest
NVIC value of 255. */
#define configLIBRARY_KERNEL_INTERRUPT_PRIORITY 15
#if !defined(ARCH_POSIX) && !defined(ARCH_WIN32)
#define CHECK_IRQ_STACK
#endif
/* Enable run time stats collection */
#define configGENERATE_RUN_TIME_STATS 1
#define INCLUDE_uxTaskGetRunTime 1
#define INCLUDE_xTaskGetIdleTaskHandle 1
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() \
do { \
(*(unsigned long *)0xe000edfc) |= (1 << 24); /* DEMCR |= DEMCR_TRCENA */ \
(*(unsigned long *)0xe0001000) |= 1; /* DWT_CTRL |= DWT_CYCCNT_ENA */ \
} \
while (0)
#define portGET_RUN_TIME_COUNTER_VALUE() (*(unsigned long *)0xe0001004) /* DWT_CYCCNT */
#ifdef DIAG_TASKS
#define configCHECK_FOR_STACK_OVERFLOW 2
#else
#define configCHECK_FOR_STACK_OVERFLOW 1
#endif
/**
* @}
*/
#endif /* FREERTOS_CONFIG_H */

36
flight/targets/boards/pikoblx/firmware/inc/dcc_stdio.h Normal file
View File

@ -0,0 +1,36 @@
/***************************************************************************
* Copyright (C) 2008 by Dominic Rath *
* Dominic.Rath@gmx.de *
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#ifndef DCC_STDIO_H
#define DCC_STDIO_H
void dbg_trace_point(unsigned long number);
void dbg_write_u32(const unsigned long *val, long len);
void dbg_write_u16(const unsigned short *val, long len);
void dbg_write_u8(const unsigned char *val, long len);
void dbg_write_str(const char *msg);
void dbg_write_char(char msg);
void dbg_write_hex32(const unsigned long val);
#endif /* DCC_STDIO_H */

52
flight/targets/boards/pikoblx/firmware/inc/openpilot.h Normal file
View File

@ -0,0 +1,52 @@
/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
* @file openpilot.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Main OpenPilot header.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef OPENPILOT_H
#define OPENPILOT_H
/* PIOS Includes */
#include <pios.h>
/* OpenPilot Libraries */
#include <utlist.h>
#include <uavobjectmanager.h>
#include <eventdispatcher.h>
#include <uavtalk.h>
#include "alarms.h"
#include <mathmisc.h>
/* Global Functions */
void OpenPilotInit(void);
#endif /* OPENPILOT_H */
/**
* @}
* @}
*/

81
flight/targets/boards/pikoblx/firmware/inc/pios_board_posix.h Normal file
View File

@ -0,0 +1,81 @@
/**
******************************************************************************
*
* @file pios_board.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_BOARD_H
#define PIOS_BOARD_H
// ------------------------
// PIOS_LED
// ------------------------
// #define PIOS_LED_LED1_GPIO_PORT GPIOC
// #define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_12
// #define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOC
// #define PIOS_LED_LED2_GPIO_PORT GPIOC
// #define PIOS_LED_LED2_GPIO_PIN GPIO_Pin_13
// #define PIOS_LED_LED2_GPIO_CLK RCC_APB2Periph_GPIOC
#define PIOS_LED_NUM 2
// #define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT, PIOS_LED_LED2_GPIO_PORT }
// #define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN, PIOS_LED_LED2_GPIO_PIN }
// #define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK, PIOS_LED_LED2_GPIO_CLK }
// -------------------------
// COM
//
// See also pios_board_posix.c
// -------------------------
// #define PIOS_USART_TX_BUFFER_SIZE 256
#define PIOS_COM_BUFFER_SIZE 1024
#define PIOS_UDP_RX_BUFFER_SIZE PIOS_COM_BUFFER_SIZE
#define PIOS_COM_TELEM_RF 0
#define PIOS_COM_GPS 1
#define PIOS_COM_TELEM_USB 2
#ifdef PIOS_ENABLE_AUX_UART
#define PIOS_COM_AUX 3
#define PIOS_COM_DEBUG PIOS_COM_AUX
#endif
/**
* glue macros for file IO
* STM32 uses DOSFS for file IO
*/
#define PIOS_FOPEN_READ(filename, file) (file = fopen((char *)filename, "r")) == NULL
#define PIOS_FOPEN_WRITE(filename, file) (file = fopen((char *)filename, "w")) == NULL
#define PIOS_FREAD(file, bufferadr, length, resultadr) (*resultadr = fread((uint8_t *)bufferadr, 1, length, *file)) != length
#define PIOS_FWRITE(file, bufferadr, length, resultadr) *resultadr = fwrite((uint8_t *)bufferadr, 1, length, *file)
#define PIOS_FCLOSE(file) fclose(file)
#define PIOS_FUNLINK(file) unlink((char *)filename)
#endif /* PIOS_BOARD_H */

195
flight/targets/boards/pikoblx/firmware/inc/pios_config.h Normal file
View File

@ -0,0 +1,195 @@
/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
* @file pios_config.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010-2013.
* @author LibrePilot, https://bitbucket.org/librepilot, Copyright (C) 2015
* @brief PiOS configuration header, the compile time config file for the PIOS.
* Defines which PiOS libraries and features are included in the firmware.
* @see The GNU Public License (GPL) Version 3
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_CONFIG_H
#define PIOS_CONFIG_H
/*
* Below is a complete list of PIOS configurable options.
* Please do not remove or rearrange them. Only comment out
* unused options in the list. See main pios.h header for more
* details.
*/
/* #define PIOS_INCLUDE_DEBUG_CONSOLE */
/* #define DEBUG_LEVEL 0 */
/* #define PIOS_ENABLE_DEBUG_PINS */
/* PIOS FreeRTOS support */
#define PIOS_INCLUDE_FREERTOS
/* PIOS CallbackScheduler support */
#define PIOS_INCLUDE_CALLBACKSCHEDULER
/* PIOS bootloader helper */
#define PIOS_INCLUDE_BL_HELPER
/* #define PIOS_INCLUDE_BL_HELPER_WRITE_SUPPORT */
/* PIOS system functions */
#define PIOS_INCLUDE_DELAY
#define PIOS_INCLUDE_INITCALL
#define PIOS_INCLUDE_SYS
#define PIOS_INCLUDE_TASK_MONITOR
// #define PIOS_INCLUDE_INSTRUMENTATION
#define PIOS_INSTRUMENTATION_MAX_COUNTERS 5
/* PIOS hardware peripherals */
#define PIOS_INCLUDE_IRQ
#define PIOS_INCLUDE_RTC
#define PIOS_INCLUDE_TIM
#define PIOS_INCLUDE_USART
#define PIOS_INCLUDE_ADC
//#define PIOS_INCLUDE_I2C
#define PIOS_INCLUDE_SPI
#define PIOS_INCLUDE_GPIO
#define PIOS_INCLUDE_EXTI
#define PIOS_INCLUDE_WDG
/* PIOS USB functions */
#define PIOS_INCLUDE_USB
#define PIOS_INCLUDE_USB_HID
#define PIOS_INCLUDE_USB_CDC
/* #define PIOS_INCLUDE_USB_RCTX */
/* PIOS sensor interfaces */
/* #define PIOS_INCLUDE_ADXL345 */
/* #define PIOS_INCLUDE_BMA180 */
/* #define PIOS_INCLUDE_L3GD20 */
#define PIOS_INCLUDE_MPU6000
#define PIOS_MPU6000_ACCEL
/* #define PIOS_INCLUDE_HMC5843 */
/* #define PIOS_INCLUDE_HMC5X83 */
/* #define PIOS_HMC5883_HAS_GPIOS */
/* #define PIOS_INCLUDE_MPU9250 */
/* #define PIOS_MPU9250_ACCEL */
/* #define PIOS_MPU9250_MAG */
/* #define PIOS_INCLUDE_BMP280 */
/* #define PIOS_INCLUDE_BMP085 */
/* #define PIOS_INCLUDE_MS5611 */
/* #define PIOS_INCLUDE_MPXV */
/* #define PIOS_INCLUDE_ETASV3 */
/* #define PIOS_INCLUDE_HCSR04 */
#define PIOS_SENSOR_RATE 500.0f
#define PIOS_INCLUDE_WS2811
/* PIOS receiver drivers */
#define PIOS_INCLUDE_PWM
#define PIOS_INCLUDE_PPM
#define PIOS_INCLUDE_PPM_FLEXI
#define PIOS_INCLUDE_DSM
#define PIOS_INCLUDE_SBUS
#define PIOS_INCLUDE_EXBUS
#define PIOS_INCLUDE_SRXL
#define PIOS_INCLUDE_HOTT
#define PIOS_INCLUDE_IBUS
/* #define PIOS_INCLUDE_GCSRCVR */
/* #define PIOS_INCLUDE_OPLINKRCVR */
/* PIOS abstract receiver interface */
#define PIOS_INCLUDE_RCVR
/* PIOS common peripherals */
#define PIOS_INCLUDE_LED
#define PIOS_INCLUDE_IAP
#define PIOS_INCLUDE_SERVO
/* #define PIOS_INCLUDE_I2C_ESC */
/* #define PIOS_INCLUDE_OVERO */
/* #define PIOS_OVERO_SPI */
/* #define PIOS_INCLUDE_SDCARD */
/* #define LOG_FILENAME "startup.log" */
#define PIOS_INCLUDE_FLASH
#define PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
#define FLASH_FREERTOS
/* #define PIOS_INCLUDE_FLASH_EEPROM */
#define PIOS_INCLUDE_FLASH_INTERNAL
/* PIOS radio modules */
/* #define PIOS_INCLUDE_RFM22B */
/* #define PIOS_INCLUDE_RFM22B_COM */
/* #define PIOS_INCLUDE_PPM_OUT */
/* #define PIOS_RFM22B_DEBUG_ON_TELEM */
/* PIOS misc peripherals */
/* #define PIOS_INCLUDE_VIDEO */
/* #define PIOS_INCLUDE_WAVE */
/* #define PIOS_INCLUDE_UDP */
/* PIOS abstract comms interface with options */
#define PIOS_INCLUDE_COM
/* #define PIOS_INCLUDE_COM_MSG */
#define PIOS_INCLUDE_TELEMETRY_RF
/* #define PIOS_INCLUDE_COM_TELEM */
/* #define PIOS_INCLUDE_COM_FLEXI */
/* #define PIOS_INCLUDE_COM_AUX */
/* #define PIOS_TELEM_PRIORITY_QUEUE */
#define PIOS_INCLUDE_GPS
/* #define PIOS_GPS_MINIMAL */
#define PIOS_INCLUDE_GPS_NMEA_PARSER
#define PIOS_INCLUDE_GPS_UBX_PARSER
#define PIOS_INCLUDE_GPS_DJI_PARSER
#define PIOS_GPS_SETS_HOMELOCATION
/* Stabilization options */
#define PIOS_QUATERNION_STABILIZATION
/* #define PIOS_EXCLUDE_ADVANCED_FEATURES */
/* Performance counters */
#define IDLE_COUNTS_PER_SEC_AT_NO_LOAD 1995998
/* Alarm Thresholds */
#define HEAP_LIMIT_WARNING 220
#define HEAP_LIMIT_CRITICAL 40
#define IRQSTACK_LIMIT_WARNING 100
#define IRQSTACK_LIMIT_CRITICAL 60
#define CPULOAD_LIMIT_WARNING 85
#define CPULOAD_LIMIT_CRITICAL 95
/* Task stack sizes */
#define PIOS_ACTUATOR_STACK_SIZE 800
#define PIOS_MANUAL_STACK_SIZE 935
#define PIOS_RECEIVER_STACK_SIZE 840
#define PIOS_SYSTEM_STACK_SIZE 1536
/* #define PIOS_STABILIZATION_STACK_SIZE 400 */
#define PIOS_TELEM_STACK_SIZE 800
#define PIOS_EVENTDISPATCHER_STACK_SIZE 256
/* This can't be too high to stop eventdispatcher thread overflowing */
#define PIOS_EVENTDISAPTCHER_QUEUE 10
/* Revolution series */
#define REVOLUTION
#endif /* PIOS_CONFIG_H */
/**
* @}
* @}
*/

48
flight/targets/boards/pikoblx/firmware/inc/pios_config_posix.h Normal file
View File

@ -0,0 +1,48 @@
/**
******************************************************************************
*
* @file pios_config.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief PiOS configuration header.
* Central compile time config for the project.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_CONFIG_POSIX_H
#define PIOS_CONFIG_POSIX_H
/* Enable/Disable PiOS Modules */
#define PIOS_INCLUDE_SYS
#define PIOS_INCLUDE_DELAY
#define PIOS_INCLUDE_LED
#define PIOS_INCLUDE_FREERTOS
#define PIOS_INCLUDE_CALLBACKSCHEDULER
#define PIOS_INCLUDE_TASK_MONITOR
#define PIOS_INCLUDE_COM
#define PIOS_INCLUDE_UDP
#define PIOS_INCLUDE_SERVO
/* Defaults for Logging */
#define LOG_FILENAME "PIOS.LOG"
#define STARTUP_LOG_ENABLED 1
#endif /* PIOS_CONFIG_POSIX_H */

47
flight/targets/boards/pikoblx/firmware/inc/pios_usb_board_data.h Normal file
View File

@ -0,0 +1,47 @@
/**
******************************************************************************
* @addtogroup PIOS PIOS Core hardware abstraction layer
* @{
* @addtogroup PIOS_USB_BOARD Board specific USB definitions
* @brief Board specific USB definitions
* @{
*
* @file pios_usb_board_data.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Board specific USB definitions
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_USB_BOARD_DATA_H
#define PIOS_USB_BOARD_DATA_H
// Note : changing below length will require changes to the USB buffer setup
#define PIOS_USB_BOARD_CDC_DATA_LENGTH 64
#define PIOS_USB_BOARD_CDC_MGMT_LENGTH 32
#define PIOS_USB_BOARD_HID_DATA_LENGTH 64
#define PIOS_USB_BOARD_EP_NUM 4
#include <pios_usb_defs.h> /* USB_* macros */
#define PIOS_USB_BOARD_PRODUCT_ID USB_PRODUCT_ID_COPTERCONTROL
#define PIOS_USB_BOARD_DEVICE_VER USB_OP_DEVICE_VER(USB_OP_BOARD_ID_COPTERCONTROL, USB_OP_BOARD_MODE_FW)
#define PIOS_USB_BOARD_SN_SUFFIX "+FW"
#endif /* PIOS_USB_BOARD_DATA_H */

98
flight/targets/boards/pikoblx/firmware/main.cpp Normal file
View File

@ -0,0 +1,98 @@
/**
******************************************************************************
* @addtogroup LibrePilotSystem LibrePilot System
* @brief These files are the core system files for CopterControl.
* They are the ground layer just above PiOS. In practice, CopterControl actually starts
* in the main() function of coptercontrol.c
* @{
* @addtogroup LibrePilotCore LibrePilot Core
* @brief This is where the LP firmware starts. Those files also define the compile-time
* options of the firmware.
* @{
* @file coptercontrol.c
* @author The LibrePilot Project, http://www.librepilot.org Copyright (C) 2015.
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010-2015
* @brief Sets up and runs main tasks.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
extern "C" {
#include "inc/openpilot.h"
#include <systemmod.h>
/* Task Priorities */
/* Global Variables */
extern void Stack_Change(void);
} /* extern "C" */
/**
* OpenPilot Main function:
*
* Initialize PiOS<BR>
* Create the "System" task (SystemModInitializein Modules/System/systemmod.c) <BR>
* Start FreeRTOS Scheduler (vTaskStartScheduler) (Now handled by caller)
* If something goes wrong, blink LED1 and LED2 every 100ms
*
*/
int main()
{
/* NOTE: Do NOT modify the following start-up sequence */
/* Any new initialization functions should be added in OpenPilotInit() */
vPortInitialiseBlocks();
/* Brings up System using CMSIS functions, enables the LEDs. */
PIOS_SYS_Init();
SystemModStart();
/* Start the FreeRTOS scheduler, which should never return.
*
* NOTE: OpenPilot runs an operating system (FreeRTOS), which constantly calls
* (schedules) function files (modules). These functions never return from their
* while loops, which explains why each module has a while(1){} segment. Thus,
* the OpenPilot software actually starts at the vTaskStartScheduler() function,
* even though this is somewhat obscure.
*
* In addition, there are many main() functions in the OpenPilot firmware source tree
* This is because each main() refers to a separate hardware platform. Of course,
* C only allows one main(), so only the relevant main() function is compiled when
* making a specific firmware.
*
*/
vTaskStartScheduler();
/* If all is well we will never reach here as the scheduler will now be running. */
/* Do some indication to user that something bad just happened */
while (1) {
#if defined(PIOS_LED_HEARTBEAT)
PIOS_LED_Toggle(PIOS_LED_HEARTBEAT);
#endif /* PIOS_LED_HEARTBEAT */
PIOS_DELAY_WaitmS(100);
}
return 0;
}
/**
* @}
* @}
*/

258
flight/targets/boards/pikoblx/firmware/pios_board.c Normal file
View File

@ -0,0 +1,258 @@
/**
*****************************************************************************
* @file pios_board.c
* @author The LibrePilot Project, http://www.librepilot.org Copyright (C) 2015.
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* PhoenixPilot, http://github.com/PhoenixPilot, Copyright (C) 2012
* @addtogroup LibrePilotSystem LibrePilot System
* @{
* @addtogroup LibrePilotCore LibrePilot Core
* @{
* @brief Defines board specific static initializers for hardware for the CopterControl board.
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "inc/openpilot.h"
#include <pios_board_info.h>
#include <uavobjectsinit.h>
#include <hwsettings.h>
#include <hwpikoblxsettings.h>
#include <manualcontrolsettings.h>
#include <gcsreceiver.h>
#include <taskinfo.h>
#include <sanitycheck.h>
#include <actuatorsettings.h>
#include <auxmagsettings.h>
#ifdef PIOS_INCLUDE_INSTRUMENTATION
#include <pios_instrumentation.h>
#endif
#include <pios_board_io.h>
#include <pios_board_sensors.h>
/*
* Pull in the board-specific static HW definitions.
* Including .c files is a bit ugly but this allows all of
* the HW definitions to be const and static to limit their
* scope.
*
* NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
*/
#include "../board_hw_defs.c"
uintptr_t pios_uavo_settings_fs_id;
uintptr_t pios_user_fs_id = 0;
#ifdef PIOS_INCLUDE_WS2811
uint32_t pios_ws2811_id;
#endif
static HwPikoBLXSettingsData boardHwSettings;
static void hwPikoBLXSettingsUpdatedCb(__attribute__((unused)) UAVObjEvent *ev)
{
HwPikoBLXSettingsData currentBoardHwSettings;
HwPikoBLXSettingsGet(&currentBoardHwSettings);
if (memcmp(&currentBoardHwSettings, &boardHwSettings, sizeof(HwPikoBLXSettingsData)) != 0) {
ExtendedAlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL, SYSTEMALARMS_EXTENDEDALARMSTATUS_REBOOTREQUIRED, 0);
}
}
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
void PIOS_Board_Init(void)
{
#if defined(PIOS_INCLUDE_LED)
PIOS_LED_Init(&pios_led_cfg);
#endif /* PIOS_INCLUDE_LED */
#ifdef PIOS_INCLUDE_INSTRUMENTATION
PIOS_Instrumentation_Init(PIOS_INSTRUMENTATION_MAX_COUNTERS);
#endif
#if defined(PIOS_INCLUDE_SPI)
/* Set up the SPI interface to the mpu9250 */
if (PIOS_SPI_Init(&pios_spi_mpu6000_id, &pios_spi_mpu6000_cfg)) {
PIOS_DEBUG_Assert(0);
}
#endif
#if defined(PIOS_INCLUDE_FLASH)
/* Connect flash to the appropriate interface and configure it */
uintptr_t flash_id;
// initialize the internal settings storage flash
if (PIOS_Flash_Internal_Init(&flash_id, &flash_internal_system_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_internal_cfg, &pios_internal_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
// if (PIOS_FLASHFS_Logfs_Init(&pios_user_fs_id, &flashfs_internal_user_cfg, &pios_internal_flash_driver, flash_id)) {
// PIOS_DEBUG_Assert(0);
// }
#endif /* if defined(PIOS_INCLUDE_FLASH) */
/* Initialize the task monitor */
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
PIOS_Assert(0);
}
/* Initialize the delayed callback library */
PIOS_CALLBACKSCHEDULER_Initialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
#if defined(PIOS_INCLUDE_RTC)
/* Initialize the real-time clock and its associated tick */
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
PIOS_IAP_Init();
// check for safe mode commands from gcs
if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
PIOS_IAP_WriteBootCmd(0, 0);
PIOS_IAP_WriteBootCmd(1, 0);
PIOS_IAP_WriteBootCmd(2, 0);
}
HwSettingsInitialize();
HwPikoBLXSettingsInitialize();
#ifndef ERASE_FLASH
#ifdef PIOS_INCLUDE_WDG
/* Initialize watchdog as early as possible to catch faults during init */
PIOS_WDG_Init();
#endif
#endif
/* Initialize the alarms library */
AlarmsInitialize();
/* Check for repeated boot failures */
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hwsettings to defaults */
HwSettingsSetDefaults(HwSettingsHandle(), 0);
HwPikoBLXSettingsSetDefaults(HwPikoBLXSettingsHandle(), 0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_2_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
// PIOS_TIM_InitClock(&tim_4_cfg);
// PIOS_TIM_InitClock(&tim_8_cfg);
PIOS_TIM_InitClock(&tim_15_cfg);
PIOS_TIM_InitClock(&tim_16_cfg);
PIOS_TIM_InitClock(&tim_17_cfg);
#if defined(PIOS_INCLUDE_USB)
PIOS_BOARD_IO_Configure_USB();
#endif
HwPikoBLXSettingsConnectCallback(hwPikoBLXSettingsUpdatedCb);
HwPikoBLXSettingsGet(&boardHwSettings);
static const PIOS_BOARD_IO_UART_Function uart_function_map[] = {
[HWPIKOBLXSETTINGS_UARTPORT_TELEMETRY] = PIOS_BOARD_IO_UART_TELEMETRY,
[HWPIKOBLXSETTINGS_UARTPORT_GPS] = PIOS_BOARD_IO_UART_GPS,
[HWPIKOBLXSETTINGS_UARTPORT_SBUS] = PIOS_BOARD_IO_UART_SBUS,
[HWPIKOBLXSETTINGS_UARTPORT_DSM] = PIOS_BOARD_IO_UART_DSM_MAIN, // single DSM instance? ok.
[HWPIKOBLXSETTINGS_UARTPORT_EXBUS] = PIOS_BOARD_IO_UART_EXBUS,
[HWPIKOBLXSETTINGS_UARTPORT_HOTTSUMD] = PIOS_BOARD_IO_UART_HOTT_SUMD,
[HWPIKOBLXSETTINGS_UARTPORT_HOTTSUMH] = PIOS_BOARD_IO_UART_HOTT_SUMH,
[HWPIKOBLXSETTINGS_UARTPORT_SRXL] = PIOS_BOARD_IO_UART_SRXL,
[HWPIKOBLXSETTINGS_UARTPORT_IBUS] = PIOS_BOARD_IO_UART_IBUS,
[HWPIKOBLXSETTINGS_UARTPORT_DEBUGCONSOLE] = PIOS_BOARD_IO_UART_DEBUGCONSOLE,
[HWPIKOBLXSETTINGS_UARTPORT_COMBRIDGE] = PIOS_BOARD_IO_UART_COMBRIDGE,
[HWPIKOBLXSETTINGS_UARTPORT_MSP] = PIOS_BOARD_IO_UART_MSP,
[HWPIKOBLXSETTINGS_UARTPORT_MAVLINK] = PIOS_BOARD_IO_UART_MAVLINK,
};
for (unsigned int i = 0; i < HWPIKOBLXSETTINGS_UARTPORT_NUMELEM; ++i) {
if(boardHwSettings.UARTPort[i] < NELEMENTS(uart_function_map)) {
PIOS_BOARD_IO_Configure_UART(&pios_usart_cfg[i], uart_function_map[boardHwSettings.UARTPort[i]]);
}
}
#ifdef PIOS_INCLUDE_PPM
PIOS_BOARD_IO_Configure_PPM_RCVR(&pios_ppm_cfg);
#endif
#ifndef PIOS_ENABLE_DEBUG_PINS
PIOS_Servo_Init(&pios_servo_cfg);
#else
PIOS_DEBUG_Init(&pios_servo_cfg.channels, pios_servo_cfg.num_channels);
#endif
switch (boardHwSettings.LEDPort) {
case HWPIKOBLXSETTINGS_LEDPORT_WS2811:
#if defined(PIOS_INCLUDE_WS2811)
PIOS_WS2811_Init(&pios_ws2811_id, &pios_ws2811_cfg);
#endif
break;
case HWPIKOBLXSETTINGS_LEDPORT_OUTPUT:
break;
default:;
}
if (boardHwSettings.BuzzerPort == HWPIKOBLXSETTINGS_BUZZERPORT_ENABLED) {
// enable buzzer somehow
}
if (boardHwSettings.TransponderPort == HWPIKOBLXSETTINGS_TRANSPONDERPORT_ENABLED) {
// enable transponder somethow
}
PIOS_BOARD_Sensors_Configure();
PIOS_LED_On(PIOS_LED_HEARTBEAT);
/* Make sure we have at least one telemetry link configured or else fail initialization */
// PIOS_Assert(pios_com_telem_rf_id || pios_com_telem_usb_id);
}
/**
* @}
*/

145
flight/targets/boards/pikoblx/firmware/pios_board_posix.c Normal file
View File

@ -0,0 +1,145 @@
/**
******************************************************************************
*
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "inc/openpilot.h"
#include <pios_udp_priv.h>
#include <pios_com_priv.h>
#include <uavobjectsinit.h>
/**
* PIOS_Board_Init()
* initializes all the core systems on this specific hardware
* called from System/openpilot.c
*/
void PIOS_Board_Init(void)
{
/* Delay system */
PIOS_DELAY_Init();
/* Initialize the delayed callback library */
PIOS_CALLBACKSCHEDULER_Initialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
/* Initialize the alarms library */
AlarmsInitialize();
/* Initialize the task monitor */
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
PIOS_Assert(0);
}
/* Initialize the PiOS library */
PIOS_COM_Init();
}
const struct pios_udp_cfg pios_udp0_cfg = {
.ip = "0.0.0.0",
.port = 9000,
};
const struct pios_udp_cfg pios_udp1_cfg = {
.ip = "0.0.0.0",
.port = 9001,
};
const struct pios_udp_cfg pios_udp2_cfg = {
.ip = "0.0.0.0",
.port = 9002,
};
#ifdef PIOS_COM_AUX
/*
* AUX USART
*/
const struct pios_udp_cfg pios_udp3_cfg = {
.ip = "0.0.0.0",
.port = 9003,
};
#endif
/*
* Board specific number of devices.
*/
struct pios_udp_dev pios_udp_devs[] = {
#define PIOS_UDP_TELEM 0
{
.cfg = &pios_udp0_cfg,
},
#define PIOS_UDP_GPS 1
{
.cfg = &pios_udp1_cfg,
},
#define PIOS_UDP_LOCAL 2
{
.cfg = &pios_udp2_cfg,
},
#ifdef PIOS_COM_AUX
#define PIOS_UDP_AUX 3
{
.cfg = &pios_udp3_cfg,
},
#endif
};
uint8_t pios_udp_num_devices = NELEMENTS(pios_udp_devs);
/*
* COM devices
*/
/*
* Board specific number of devices.
*/
extern const struct pios_com_driver pios_serial_com_driver;
extern const struct pios_com_driver pios_udp_com_driver;
struct pios_com_dev pios_com_devs[] = {
{
.id = PIOS_UDP_TELEM,
.driver = &pios_udp_com_driver,
},
{
.id = PIOS_UDP_GPS,
.driver = &pios_udp_com_driver,
},
{
.id = PIOS_UDP_LOCAL,
.driver = &pios_udp_com_driver,
},
#ifdef PIOS_COM_AUX
{
.id = PIOS_UDP_AUX,
.driver = &pios_udp_com_driver,
},
#endif
};
const uint8_t pios_com_num_devices = NELEMENTS(pios_com_devs);
/**
* @}
*/

241
flight/targets/boards/pikoblx/pios_board.h Normal file
View File

@ -0,0 +1,241 @@
/**
******************************************************************************
*
* @file pios_board.h
* @author The LibrePilot Project, http://www.librepilot.org Copyright (C) 2015.
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
*
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_BOARD_H
#define PIOS_BOARD_H
// ------------------------
// Timers and Channels Used
// ------------------------
/*
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
------+-----------+-----------+-----------+----------
TIM1 | Servo 4 | | |
TIM2 | RC In 5 | RC In 6 | Servo 6 |
TIM3 | Servo 5 | RC In 2 | RC In 3 | RC In 4
TIM4 | RC In 1 | Servo 3 | Servo 2 | Servo 1
------+-----------+-----------+-----------+----------
*/
// ------------------------
// DMA Channels Used
// ------------------------
/* Channel 1 - */
/* Channel 2 - */
/* Channel 3 - */
/* Channel 4 - */
/* Channel 5 - */
/* Channel 6 - */
/* Channel 7 - */
/* Channel 8 - */
/* Channel 9 - */
/* Channel 10 - */
/* Channel 11 - */
/* Channel 12 - */
// ------------------------
// BOOTLOADER_SETTINGS
// ------------------------
#define BOARD_READABLE true
#define BOARD_WRITABLE true
#define MAX_DEL_RETRYS 3
// ------------------------
// WATCHDOG_SETTINGS
// ------------------------
#define PIOS_WATCHDOG_TIMEOUT 250
#define PIOS_WDG_REGISTER RTC_BKP_DR4
#define PIOS_WDG_ACTUATOR 0x0001
#define PIOS_WDG_STABILIZATION 0x0002
#define PIOS_WDG_ATTITUDE 0x0004
#define PIOS_WDG_MANUAL 0x0008
#define PIOS_WDG_AUTOTUNE 0x0010
#define PIOS_WDG_SENSORS 0x0020
// ------------------------
// TELEMETRY
// ------------------------
#define TELEM_QUEUE_SIZE 10
// ------------------------
// PIOS_LED
// ------------------------
#define PIOS_LED_HEARTBEAT 0
#define PIOS_LED_ALARM 1
#define PIOS_LED_BUZZER 2
// -------------------------
// System Settings
// -------------------------
#define PIOS_MASTER_CLOCK 72000000
// -------------------------
// Interrupt Priorities
// -------------------------
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
// ------------------------
// PIOS_I2C
// See also pios_board.c
// ------------------------
#define PIOS_I2C_MAX_DEVS 0
// -------------------------
// SPI
//
// See also pios_board.c
// -------------------------
#define PIOS_SPI_MAX_DEVS 2
extern uint32_t pios_spi_mpu6000_id;
#define PIOS_SPI_MPU6000_ADAPTER (pios_spi_mpu6000_id)
// -------------------------
// PIOS_USART
// -------------------------
#define PIOS_USART_MAX_DEVS 3
// -------------------------
// PIOS_COM
//
// See also pios_board.c
// -------------------------
#define PIOS_COM_MAX_DEVS 3
#ifdef PIOS_INCLUDE_WS2811
extern uint32_t pios_ws2811_id;
#define PIOS_WS2811_DEVICE (pios_ws2811_id)
#endif
// -------------------------
// ADC
// PIOS_ADC_PinGet(0) = Current sensor
// PIOS_ADC_PinGet(1) = Battery voltage
// -------------------------
#define PIOS_DMA_PIN_CONFIG \
{ \
{ GPIOB, GPIO_Pin_2, ADC_Channel_12, false }, /* ADC_2 / Current */ \
{ GPIOA, GPIO_Pin_5, ADC_Channel_2, false }, /* ADC_1 / Voltage */ \
}
/* we have to do all this to satisfy the PIOS_ADC_MAX_SAMPLES define in pios_adc.h */
/* which is annoying because this then determines the rate at which we generate buffer turnover events */
/* the objective here is to get enough buffer space to support 100Hz averaging rate */
#define PIOS_ADC_NUM_CHANNELS 2
#define PIOS_ADC_MAX_OVERSAMPLING 32
#define PIOS_ADC_USE_ADC2 0
// #define PIOS_ADC_USE_TEMP_SENSOR
// #define PIOS_ADC_TEMPERATURE_PIN 4
// ------------------------
// PIOS_RCVR
// See also pios_board.c
// ------------------------
#define PIOS_RCVR_MAX_DEVS 3
#define PIOS_RCVR_MAX_CHANNELS 12
#define PIOS_GCSRCVR_TIMEOUT_MS 100
// -------------------------
// Receiver PPM input
// -------------------------
#define PIOS_PPM_MAX_DEVS 1
#define PIOS_PPM_NUM_INPUTS 16
// -------------------------
// Receiver PWM input
// -------------------------
#define PIOS_PWM_MAX_DEVS 1
#define PIOS_PWM_NUM_INPUTS 6
// -------------------------
// Receiver DSM input
// -------------------------
#define PIOS_DSM_MAX_DEVS 2
#define PIOS_DSM_NUM_INPUTS 12
// -------------------------
// Receiver S.Bus input
// -------------------------
#define PIOS_SBUS_MAX_DEVS 1
#define PIOS_SBUS_NUM_INPUTS (16 + 2)
// -------------------------
// Receiver HOTT input
// -------------------------
#define PIOS_HOTT_MAX_DEVS 1
#define PIOS_HOTT_NUM_INPUTS 32
// -------------------------
// Receiver EX.Bus input
// -------------------------
#define PIOS_EXBUS_MAX_DEVS 1
#define PIOS_EXBUS_NUM_INPUTS 16
// -------------------------
// Receiver Multiplex SRXL input
// -------------------------
#define PIOS_SRXL_MAX_DEVS 1
#define PIOS_SRXL_NUM_INPUTS 16
// -------------------------
// Receiver FlySky IBus input
// -------------------------
#define PIOS_IBUS_MAX_DEVS 1
#define PIOS_IBUS_NUM_INPUTS 10
// -------------------------
// Servo outputs
// -------------------------
#define PIOS_SERVO_UPDATE_HZ 50
#define PIOS_SERVOS_INITIAL_POSITION 0 /* dont want to start motors, have no pulse till settings loaded */
#define PIOS_SERVO_BANKS 6
// --------------------------
// Timer controller settings
// --------------------------
#define PIOS_TIM_MAX_DEVS 3
// -------------------------
// GPIO
// -------------------------
#define PIOS_GPIO_PORTS {}
#define PIOS_GPIO_PINS {}
#define PIOS_GPIO_CLKS {}
#define PIOS_GPIO_NUM 0
// -------------------------
// USB
// -------------------------
#define PIOS_USB_HID_MAX_DEVS 1
#define PIOS_USB_ENABLED 1
#define PIOS_USB_MAX_DEVS 1
#endif /* PIOS_BOARD_H */

97
flight/targets/boards/pikoblx/pios_usb_board_data.c Normal file
View File

@ -0,0 +1,97 @@
/**
******************************************************************************
* @addtogroup PIOS PIOS Core hardware abstraction layer
* @{
* @addtogroup PIOS_USB_BOARD Board specific USB definitions
* @brief Board specific USB definitions
* @{
*
* @file pios_usb_board_data.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Board specific USB definitions
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "inc/pios_usb_board_data.h" /* struct usb_*, USB_* */
#include <pios_sys.h> /* PIOS_SYS_SerialNumberGet */
#include <pios_usbhook.h> /* PIOS_USBHOOK_* */
#include <pios_usb_util.h> /* PIOS_USB_UTIL_AsciiToUtf8 */
static const uint8_t usb_product_id[18] = {
sizeof(usb_product_id),
USB_DESC_TYPE_STRING,
'P', 0,
'i', 0,
'k', 0,
'o', 0,
' ', 0,
'B', 0,
'L', 0,
'X', 0,
};
static uint8_t usb_serial_number[2 + PIOS_SYS_SERIAL_NUM_ASCII_LEN * 2 + (sizeof(PIOS_USB_BOARD_SN_SUFFIX) - 1) * 2] = {
sizeof(usb_serial_number),
USB_DESC_TYPE_STRING,
};
static const struct usb_string_langid usb_lang_id = {
.bLength = sizeof(usb_lang_id),
.bDescriptorType = USB_DESC_TYPE_STRING,
.bLangID = htousbs(USB_LANGID_ENGLISH_US),
};
static const uint8_t usb_vendor_id[28] = {
sizeof(usb_vendor_id),
USB_DESC_TYPE_STRING,
'o', 0,
'p', 0,
'e', 0,
'n', 0,
'p', 0,
'i', 0,
'l', 0,
'o', 0,
't', 0,
'.', 0,
'o', 0,
'r', 0,
'g', 0
};
int32_t PIOS_USB_BOARD_DATA_Init(void)
{
/* Load device serial number into serial number string */
uint8_t sn[PIOS_SYS_SERIAL_NUM_ASCII_LEN + 1];
PIOS_SYS_SerialNumberGet((char *)sn);
/* Concatenate the device serial number and the appropriate suffix ("+BL" or "+FW") into the USB serial number */
uint8_t *utf8 = &(usb_serial_number[2]);
utf8 = PIOS_USB_UTIL_AsciiToUtf8(utf8, sn, PIOS_SYS_SERIAL_NUM_ASCII_LEN);
utf8 = PIOS_USB_UTIL_AsciiToUtf8(utf8, (uint8_t *)PIOS_USB_BOARD_SN_SUFFIX, sizeof(PIOS_USB_BOARD_SN_SUFFIX) - 1);
PIOS_USBHOOK_RegisterString(USB_STRING_DESC_PRODUCT, (uint8_t *)&usb_product_id, sizeof(usb_product_id));
PIOS_USBHOOK_RegisterString(USB_STRING_DESC_SERIAL, (uint8_t *)&usb_serial_number, sizeof(usb_serial_number));
PIOS_USBHOOK_RegisterString(USB_STRING_DESC_LANG, (uint8_t *)&usb_lang_id, sizeof(usb_lang_id));
PIOS_USBHOOK_RegisterString(USB_STRING_DESC_VENDOR, (uint8_t *)&usb_vendor_id, sizeof(usb_vendor_id));
return 0;
}

4
ground/gcs/src/plugins/config/configgadgetwidget.cpp
View File

@ -250,8 +250,10 @@ void ConfigGadgetWidget::onAutopilotConnect()
if (board == 0x1001) {
widget = new ConfigSPRacingF3HWWidget(this);
} else if (board == 0x1002) {
} else if (board == 0x1002 || board == 0x1003) { // SpracingF3 EVO or NucleoF303RE
//widget = new ConfigSPRacingF3EVOHWWidget(this);
} else if (board == 0x1005) {
//widget = new ConfigPikoBLXHWWidget(this);
}
if(widget) {
widget->bind();

7
ground/gcs/src/plugins/config/configoutputwidget.cpp
View File

@ -377,10 +377,13 @@ void ConfigOutputWidget::refreshWidgetsValuesImpl(UAVObject *obj)
// SPRacingF3
bankLabels << "1 (1-3,7)" << "2 (4,8)" << "3 (5)" << "4 (6)";
channelBanks << 1 << 1 << 1 << 2 << 3 << 4 << 1 << 2;
} else if (board == 0x1002) {
// SPRacingF3_EVO
} else if (board == 0x1002 || board == 0x1003) {
// SPRacingF3_EVO, NucleoF303RE
bankLabels << "1 (1-3)" << "2 (4)" << "3 (5-8)";
channelBanks << 1 << 1 << 1 << 2 << 3 << 3 << 3 << 3;
} else if (board == 0x1005) { // PikoBLX
bankLabels << "1 (1-4)" << "2 (5-6)" << "3 (7)" << "4 (8)";
channelBanks << 1 << 1 << 1 << 1 << 2 << 2 << 3 << 4;
}
}

5
ground/gcs/src/plugins/setupwizard/pages/controllerpage.cpp
View File

@ -125,7 +125,10 @@ SetupWizard::CONTROLLER_TYPE ControllerPage::getControllerType()
case 0x1002:
return SetupWizard::CONTROLLER_SPRACINGF3EVO;
case 0x1005:
return SetupWizard::CONTROLLER_PIKOBLX;
default:
return SetupWizard::CONTROLLER_UNKNOWN;
}

2
ground/gcs/src/plugins/setupwizard/vehicleconfigurationsource.h
View File

@ -58,7 +58,7 @@ class VehicleConfigurationSource {
public:
VehicleConfigurationSource();
enum CONTROLLER_TYPE { CONTROLLER_UNKNOWN, CONTROLLER_CC, CONTROLLER_CC3D, CONTROLLER_REVO, CONTROLLER_NANO, CONTROLLER_SPARKY2, CONTROLLER_OPLINK, CONTROLLER_DISCOVERYF4, CONTROLLER_SPRACINGF3, CONTROLLER_SPRACINGF3EVO };
enum CONTROLLER_TYPE { CONTROLLER_UNKNOWN, CONTROLLER_CC, CONTROLLER_CC3D, CONTROLLER_REVO, CONTROLLER_NANO, CONTROLLER_SPARKY2, CONTROLLER_OPLINK, CONTROLLER_DISCOVERYF4, CONTROLLER_SPRACINGF3, CONTROLLER_SPRACINGF3EVO, CONTROLLER_PIKOBLX };
enum VEHICLE_TYPE { VEHICLE_UNKNOWN, VEHICLE_MULTI, VEHICLE_FIXEDWING, VEHICLE_HELI, VEHICLE_SURFACE };
enum VEHICLE_SUB_TYPE { MULTI_ROTOR_UNKNOWN, MULTI_ROTOR_TRI_Y, MULTI_ROTOR_QUAD_X, MULTI_ROTOR_QUAD_PLUS, MULTI_ROTOR_QUAD_H,
MULTI_ROTOR_HEXA, MULTI_ROTOR_HEXA_H, MULTI_ROTOR_HEXA_X, MULTI_ROTOR_HEXA_COAX_Y, MULTI_ROTOR_OCTO,

1
ground/gcs/src/plugins/uavobjects/uavobjects.pro
View File

@ -99,6 +99,7 @@ UAVOBJS = \
$${UAVOBJ_XML_DIR}/hwsettings.xml \
$${UAVOBJ_XML_DIR}/hwspracingf3settings.xml \
$${UAVOBJ_XML_DIR}/hwspracingf3evosettings.xml \
$${UAVOBJ_XML_DIR}/hwpikoblxsettings.xml \
$${UAVOBJ_XML_DIR}/i2cstats.xml \
$${UAVOBJ_XML_DIR}/magsensor.xml \
$${UAVOBJ_XML_DIR}/magstate.xml \

8
ground/gcs/src/plugins/uavobjectutil/devicedescriptorstruct.h
View File

@ -68,7 +68,13 @@ public:
case 0x1002:
return QString("SPRacingF3EVO");
case 0x1003:
return QString("NucleoF303RE");
case 0x1005:
return QString("PikoBLX");
default:
return QString("");

3
ground/gcs/src/plugins/uploader/uploadergadgetwidget.cpp
View File

@ -794,6 +794,9 @@ bool UploaderGadgetWidget::autoUpdate(bool erase)
case 0x1003:
filename = "fw_nucleof303re";
break;
case 0x1005:
filename = "fw_pikoblx";
break;
default:
emit progressUpdate(FAILURE, QVariant(tr("Unknown board id '0x%1'").arg(QString::number(m_dfu->devices[0].ID, 16))));
emit autoUpdateFailed();

14
shared/uavobjectdefinition/hwpikoblxsettings.xml Normal file
View File

@ -0,0 +1,14 @@
<xml>
<object name="HwPikoBLXSettings" singleinstance="true" settings="true" category="System">
<description>Furious FPV Piko BLX Micro Flight Controller hardware configuration</description>
<field name="UARTPort" units="function" type="enum" elements="3" options="Disabled,Telemetry,GPS,S.Bus,DSM,EX.Bus,HoTT SUMD,HoTT SUMH,SRXL,IBus,DebugConsole,ComBridge,MSP,MAVLink" defaultvalue="Disabled"/>
<field name="LEDPort" units="function" type="enum" elements="1" options="Disabled,WS2811,Output" defaultvalue="Disabled"/>
<field name="TransponderPort" units="function" type="enum" elements="1" options="Disabled,Enabled" defaultvalue="Disabled"/>
<field name="BuzzerPort" units="function" type="enum" elements="1" options="Disabled,Enabled" defaultvalue="Disabled"/>
<access gcs="readwrite" flight="readwrite"/>
<telemetrygcs acked="true" updatemode="onchange" period="0"/>
<telemetryflight acked="true" updatemode="onchange" period="0"/>
<logging updatemode="manual" period="0"/>
</object>
</xml>