rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Code Issues Releases Activity
1,902 Commits 5 Branches 8 Tags 266 MiB
0a9ab6ca5f
Commit Graph

27 Commits

Author SHA1 Message Date
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:51:33 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:39:23 +00:00
cwabbott
8d1a99ae15 PiOS.win32: Updated PiOS.win32 makefile for recent UAVObject changes, and also updated the experimental stabilization code to comply with recent changes to the simple code. Nobody uses SiTL anymore :( . 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1858 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:59:58 +00:00
edouard
eeb5eab177 Flight/Stabilization: fix for -180/+180 yaw transition which caused glitches in the stab module. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1853 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 16:43:10 +00:00
peabody124
29b087703b Flight/AHRSComms: Decrease stack size, not needed to be that big. Also made 
ActuatorDesired dT in ms like the uavobject indicates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1839 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:32 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to 
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:26 +00:00
edouard
d2c1014e29 Re-enabled yaw stabilization after SystemSettings changed. There might be a lingering issue when the 
yaw angle crosses the zero-360 mark, beware.
You can disable yaw stabilization by setting all PID gains to zero for yaw.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1828 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:26:43 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous 
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:29 +00:00
peabody124
4461aba6d6 Flight/Stabilization: Move to object event system. Latency from ahrs_comm 
update to actuator update now ~0.7 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:26 +00:00
peabody124
aa42256ad1 Flight/Stabilization: Convert all PID loops to units of seconds instead of ms. 
THIS MEANS YOU MUST RETUNE YOUR PID LOOP IF YOU'RE FLYING WITH IT

Alternatively divide Kd by 1000 and multiply Ki by 1000

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1782 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 09:04:43 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs 
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:34 +00:00
peabody124
8475a68958 Flight/Stabilization: Keep command and error in deg/s for rate stabilization 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1766 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:54 +00:00
peabody124
11f2b1a8dc Flight/Stabilization: Dont cap error at maximum stabilization value - that is to scale control throws. Create another variable if we want this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1676 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:15:02 +00:00
peabody124
41b7a99883 Flight/Stabilization: Yaw rate stabilization error should be normalized by dt 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1669 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 02:00:55 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:08 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:41 +00:00
andrew
65dc5e9b04 Yaw stabilisation for the simple algorithm was calculating the error and not taking into account that 350º error is the same as -10º error. 
The resultant error could range from -360º -> +360º
Since this is only used for Helicopters / multi rotors, and the aircraft can rotate in any direction, I added the modulo logic so that it is now from -180º -> +180º this should now take quickest path to correct the error.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1464 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:20:43 +00:00
andrew
2361af19fb First attempt at ccpm mixing for single rotor helicopter. 
This has throttle and pitch curves implemented and can be configured for many swashplate configurations.

This has flown a 450 clone (with training wheels) and the ccpm worked well.

Still need to neaten up some stuff and work out how to implement yaw stabilisation in manual mode.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1412 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-26 06:00:57 +00:00
cwabbott
d910b8f756 slight changes to get PiOS.win32 to compile 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 14:21:58 +00:00
corvus
02a78f0470 moved Vassilis stabilization module as of r1153 into Stabilization/simple 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466 moved new stabilization code into experimental subdirectory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:00:51 +00:00
corvus
2621d07574 Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired 
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this)) 
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-26 21:26:28 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 19:53:35 +00:00
peabody124
99e94228a9 More doxygen updates 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 01:02:34 +00:00
vassilis
c74eb2f0e9 OP-26 Flight/Stabilization First release of stabilization module. Tested using FlightGear, default tuning is for the HITL simulation. Works fairly well but a number of improvements can be made to aid tuning. The ManualControl settings must be first set as you would normally do for HITL simulation, flight mode is changed using the mode channel. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@887 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-25 02:28:16 +00:00