rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
4,503 Commits 5 Branches 8 Tags 266 MiB
0fbcf7723d
Commit Graph

31 Commits

Author SHA1 Message Date
James Cotton
0fbcf7723d Code to disable all gyros. All modules now running. 2012-01-04 22:37:15 -06:00
James Cotton
5ee9c8008e Temporarily swap serial ports while debugging 2012-01-04 22:19:13 -06:00
James Cotton
0cc18e7dcf Add files for new L3DG20 sensor 2012-01-04 20:33:54 -06:00
James Cotton
c080080810 Add ability to change the SPI bus runs at 2011-12-29 00:09:53 -06:00
James Cotton
bf98630851 Add streaming the sensor data out of the serial port 2011-12-26 17:52:45 -06:00
James Cotton
43fa9e702e Move DSM to Flexiport and enable GPS on GPS port. Currently GPS module locks 
up though.
 2011-11-28 09:11:13 -06:00
James Cotton
1af66fc3d2 Get rid of 500 ms delay in startup for the pios_sys so that servos start 
properly but a delay is still needs to get MPU6000 up right.  Fucking POS.
 2011-11-27 18:05:20 -06:00
James Cotton
deea7cde41 Speed up coms to MPU6000 2011-11-27 01:51:43 -06:00
James Cotton
8bbc767a4e Get the pressure sensor working and reading into Revolution 2011-11-27 00:52:09 -06:00
James Cotton
13729f854e PiOS F4: Fix PWM timer interrupts and enable PWM input 2011-11-26 22:41:41 -06:00
James Cotton
21367d3a22 Spektrum support for Revolution 2011-11-26 22:19:42 -06:00
James Cotton
e24c905ff7 F4 PiOS: Reimplement the RTC logic for F4 2011-11-26 22:13:57 -06:00
James Cotton
d3314f041a MPU6000: Bring SPI down to 5 Mhz - much closer to spec 2011-11-26 14:56:28 -06:00
James Cotton
11ad135b27 Some changes to MPU6000 driver to make it start more reliably on fresh powerup 2011-11-26 14:12:12 -06:00
James Cotton
1574c96c3a Add all the pin remappings and pin sources for F4 timers 2011-11-26 03:36:36 -06:00
James Cotton
57b381235e Init the timers and PWM in the board file 2011-11-26 02:19:56 -06:00
James Cotton
3e01c84a15 Add pin mappings for PWM and receiver port 2011-11-26 02:19:56 -06:00
James Cotton
e71030c6ce Remove testing code for pressure sensor 2011-11-26 02:19:56 -06:00
James Cotton
7637e9f669 Get flash chip working and saving to memory. Also get the I2C working with 
BMA180 driver.
 2011-11-19 00:13:02 -06:00
James Cotton
6d74e96c31 Got attitude working again. MPU6000 FIFO reading needs a bit of work. 2011-11-18 00:00:55 -06:00
James Cotton
79730d5afa Try and get the MPU6000 buffer to run down. Staying high for some reason. 2011-11-17 11:23:31 -06:00
James Cotton
0efffef1fa Work on bringing the Revolution board up 2011-11-17 10:13:34 -06:00
James Cotton
8477c2229b Using real prototype board now. Move telemetry to GPS port for easy-ness right 
now.
 2011-11-17 01:58:51 -06:00
James Cotton
1086df5b21 Correctly configure MPU6050 interrupt. However currently not pushing data to 
the buffer as that seems to fail.
 2011-11-14 11:11:40 -06:00
James Cotton
180d84e373 Update the MPU6050 code a bit more to use the right registers. 2011-11-14 10:09:49 -06:00
James Cotton
76a956416c Switch revo over to MPU6050 2011-11-13 19:45:06 -06:00
James Cotton
1e2fe77e3f Start migrating the attitude solution to FreeRTOS 2011-11-13 18:51:35 -06:00
James Cotton
2b37d4bbb5 Enable telemetry on revo 2011-11-13 16:10:19 -06:00
James Cotton
a2015a4f8d Compiled and flashing 2011-11-02 13:20:39 -05:00
James Cotton
0ce80e02f5 Compiles now 2011-11-02 02:51:20 -05:00
James Cotton
48d2e038bb More work to the revolution build 2011-11-01 04:39:20 -05:00