Corvus Corax
8173c7b7c6
Refactor GPS_PURISTIC into GPS_MINIMAL
2011-08-25 15:44:49 +02:00
Corvus Corax
1d797bf004
Fixed error introduced by merge
2011-08-25 15:40:45 +02:00
Corvus Corax
4bd72923e5
Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS
...
Conflicts:
flight/Modules/GPS/GPS.c
flight/Modules/GPS/GTOP_BIN.c
flight/Modules/GPS/NMEA.c
shared/uavobjectdefinition/hwsettings.xml
2011-08-25 15:33:23 +02:00
Corvus Corax
54ecf233f3
Modules/PS: typo fix
2011-08-25 15:13:50 +02:00
Corvus Corax
7e396efbbf
Modules/GPS: Assert buffer creation
2011-08-25 15:11:29 +02:00
Corvus Corax
dfdea16065
Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers
2011-08-25 14:46:30 +02:00
Corvus Corax
697ac6067e
OP-567 Modules/GPS: Block in PIOS_COM, not in TaskDelay - or we will miss updates!
2011-08-25 13:33:41 +02:00
Stacey Sheldon
edc0caf521
heap: set memory critical alarm on malloc failures
...
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
2011-08-21 23:14:32 -04:00
Corvus Corax
838149b53f
GPS: homelocation init is optional, satellites must be initialized
2011-08-21 18:20:33 +02:00
James Cotton
368323fd59
Merge remote-tracking branch 'origin/james/erase_settings' into next
2011-08-20 13:07:01 -05:00
Corvus Corax
1ad65e0718
Fixed include in sysstemmod. pios_config.h should not be included explicitly.
2011-08-20 15:04:00 +02:00
Corvus Corax
53d0732fc6
Enable GPS module as "optional module" in CooterControl
2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a
HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules)
2011-08-20 01:24:06 +02:00
Corvus Corax
b75890fcd4
Merge branch 'next' into CC_GPS
2011-08-19 21:34:38 +02:00
Corvus Corax
9bba1f7ae9
Posix: fix object initialization where necessary
2011-08-19 18:36:30 +02:00
James Cotton
ab7e57ad2b
Initialize objects for guidance in the correct place. Init some objects in
...
pios_board_posix since AHRSComms not around.
2011-08-19 09:52:05 -05:00
James Cotton
482bec497b
Revert "Fixed modules that didn't initialize used UAVObjects correctly"
...
Modules should initialize their settings and the objects they source. Not just
everything.
This reverts commit 9ad85e9b7b
.
2011-08-19 09:44:38 -05:00
Corvus Corax
9ad85e9b7b
Fixed modules that didn't initialize used UAVObjects correctly
2011-08-19 13:20:15 +02:00
Corvus Corax
f86e53bf91
Merge branch 'OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk' into next
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
2011-08-19 12:10:40 +02:00
Corvus Corax
6fe495c088
Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
2011-08-17 08:30:32 +02:00
James Cotton
35eef66bfe
OP-557: Add a UAVO access method to erase the entire flash chip. Normally not
...
needed by users because if too much changes I change the FS magic and trigger a
wipe.
Possibly the erase should require a particular "magic" object id value to
execute? This would make it harder to do manually through UAVOs though.
2011-08-15 10:33:27 -05:00
James Cotton
86b652bbab
Merge branch 'next' into camera_stabilization
2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4
Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
2011-08-14 15:48:16 +01:00
James Cotton
a2b76adc33
Attitude: Do not start attitude estimation until accel data appears. This
...
fixes the NaN when AttitudeSettings not available.
2011-08-13 18:53:42 -05:00
James Cotton
ec4e23aff9
Camera Stabilization: Bound outputs to [-1,1] although this should be redundant
...
with checks in actuator.
2011-08-11 14:34:38 -05:00
James Cotton
bbe3c1533a
Merge branch 'next' into camera_stabilization
2011-08-10 21:57:45 -05:00
James Cotton
ab288e95ab
Stabilization: Small patch so that by default the integral is zeroed while
...
throttle is low (good for quads) but can be disabled (good for planes and also
testing helis).
2011-08-10 03:51:46 -05:00
James Cotton
f23eaa8273
Make the Actuator pull from the CameraDesired fields
2011-08-09 21:47:42 -05:00
James Cotton
f11aa80444
CameraStabilization: Make the CameraStabilization module put the desired
...
position into another object (will help with configuration).
2011-08-09 20:45:38 -05:00
James Cotton
c4e272b9ad
Merge branch 'next' into camera_stabilization
2011-08-09 20:16:45 -05:00
James Cotton
ec2121bca8
Attitude: Keep first element of quaternion positive
2011-08-08 21:16:04 -05:00
James Cotton
fd86c25b49
Make sure OP compiles with new object init structure.
2011-08-04 15:01:54 -05:00
James Cotton
a592e7d398
ManualControlSettings must be also initialized in pios_board.c
2011-08-04 07:47:50 -05:00
Stacey Sheldon
90b2625deb
rcvractivity: Add tracking of Rx channel activity
2011-08-02 01:27:37 -04:00
Stacey Sheldon
06cdeb7b61
rcvr: support multiple simultaneous receivers
...
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
2011-08-02 01:22:04 -04:00
James Cotton
cb9c6dfb5e
Change the sequencing of telemetry starting to make sure all the objects that
...
were registered in an initialize and then enumerated by telemetry
2011-07-30 11:31:45 +09:00
James Cotton
ae67c51632
Register some missing objects with their modules
2011-07-30 11:28:21 +09:00
James Cotton
2e5a36a4db
Merge branch 'stac/refactor-usart-com' into camera_stabilization
2011-07-30 10:55:16 +09:00
James Cotton
96c2d24253
Merge branch 'next' into camera_stabilization
...
Conflicts:
flight/CopterControl/Makefile
flight/CopterControl/System/coptercontrol.c
flight/Modules/Actuator/actuator.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
flight/Modules/System/systemmod.c
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/stabilizationdesired.xml
2011-07-30 10:06:10 +09:00
James Cotton
333ab645ec
Dos2unix manualcontrol.c to facilitate merging
2011-07-30 09:55:02 +09:00
Stacey Sheldon
c2fb0d8b43
com: allow run-time allocation of buffers
2011-07-29 15:33:14 -04:00
Stacey Sheldon
5f8760a55c
com: Move buffering out of USART/HID layer and into COM layer
...
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.
Bytes are now pushed directly from the usart layer into the
com layer without any buffering. The com layer performs all
of the buffering.
A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.
Misc related changes:
- Remove obsolete .handler field from irq configs
- Adapt all users of PIOS_COM_* functions to new API
- Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00
Stacey Sheldon
6580462916
rcvr: specify drivers for groups of channels
...
Each channel was previously tracking a separate driver.
Now, channels are grouped within a channel group to save
RAM used for tracking and to better reflect how channels
are actually mapped.
2011-07-14 23:22:42 -04:00
Mathieu Rondonneau
612a439199
OP-423: simplify the MODULE_INITCALL macro and remove the ordering loops
2011-07-12 20:44:32 -07:00
James Cotton
0aec3b592c
Changing stabilization so that the PIDs are zeroed when not armed, but NOT when
...
the throttle is < 0. This will make things like axis-lock work while armed
without throttle. HOWEVER don't hold your stick in the arming position for a
long time or you can wind up the integrals now.
2011-07-12 14:35:32 -05:00
James Cotton
2c7cfe435f
Somehow this task runs quite a few times at the beginning so dT was going to
...
zero and making the attitude get NaN. Wrote recovery code for that condition
(should never occur) and also force minimum dT to 1 ms (also shouldn't occur)
2011-07-12 14:18:19 -05:00
James Cotton
53ca934b2b
Merge branch 'heli_stabilization'
...
Conflicts:
flight/CopterControl/System/inc/pios_config.h
flight/Modules/Attitude/attitude.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
2011-07-12 13:28:20 -05:00
Mathieu Rondonneau
d38f6167e3
OP-423:
...
Also reduce heap has it does not fit in SRAM anymore (not with current compiler).
(that's ok since if there is more space available, it will be reclaimed).
Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint
Conflicts:
flight/CopterControl/System/inc/pios_config.h
flight/Modules/ManualControl/manualcontrol.c
2011-07-08 06:29:34 -07:00
James Cotton
2d995dc2f7
OP-539: Don't call the gyro setting callback during init because it clears the
...
gyro bias estimation.
2011-07-05 22:27:03 -05:00
Mathieu Rondonneau
9b9b5a1367
OP-423: remove ';' at the end of macro
2011-07-05 19:44:54 -07:00
Stacey Sheldon
740b5f1584
rcvr: convert PWM, PPM, SBUS and Spektrum to use PIOS_RCVR
...
All receivers now fall under the same driver API provided
by pios_rcvr.c.
This is part of a larger sequence of commits that will
switch the receiver selection over to boot time dynamic
configuration via UAVObjects.
2011-07-05 22:03:25 -04:00
James Cotton
ad8876c62a
OP-193: Weak leveling variant on rate mode. Slowly will return to level.
2011-07-04 20:44:55 -05:00
James Cotton
46ae7eb17b
Merge remote-tracking branch 'origin/bugfix-ground' into heli_stabilization
2011-06-30 19:40:22 -05:00
James Cotton
39e646ae1d
Make the rates all work properly in axis lock
2011-06-30 19:38:52 -05:00
zedamota
567e3ffcad
OP-542 Board resets with new Uploader
...
IAP module now checks magic value
2011-06-30 12:17:27 +01:00
James Cotton
a7206361d2
Slightly different way to respond to sticks in axis lock that is much more
...
responsive and avoids overshoot.
2011-06-26 21:59:54 -05:00
Mathieu Rondonneau
6683ce8570
OP-423: Make it more obvious that MODULE_TASKCREATE_ALL and MODULE_INITIALIZE_ALL are macro (for now):
...
- remove the ;
- also encapsulate the macro by {} in his own scope.
2011-06-25 11:40:01 -07:00
James Cotton
4c0245281d
Now we store the gyro bias avoid quashing the initialization correction.
2011-06-25 12:32:06 -05:00
Mathieu Rondonneau
de55c56427
OP-423: Change capital on macro to be uppercase for consistency.
2011-06-24 22:03:03 -07:00
James Cotton
dedbcbfceb
Correct nasty bug on range checking for max rate and use the axis lock rate
...
desired when in that mode.
2011-06-24 11:30:28 -05:00
James Cotton
e6ad21d881
Make gyro bias in deg/s * 100 to calibrate more precisely.
2011-06-24 10:51:07 -05:00
James Cotton
038f955cb1
OP-410 OP-333: Axis lock (heading hold) implemented
2011-06-24 10:38:26 -05:00
James Cotton
ab7ff56d96
Compute initial gyro bias while calibrating to speed up convergence
2011-06-24 10:38:26 -05:00
James Cotton
c0eff41dc6
OP-410 OP-333: Created an Axis-lock setting for stabilization
2011-06-24 10:38:26 -05:00
James Cotton
0a4bbcc12e
Added a field for initial gyro bias to speed up initialization.
2011-06-24 10:38:26 -05:00
James Cotton
28501842c3
Expose the rate D term which in simulations seems to help damp oscillations for
...
high RateKp terms. However it might be sensitive to gyro noise (vibrations).
In addition it is mathematically similar to lead shapign so probably only use
one or the other.
2011-06-24 10:38:25 -05:00
James Cotton
a09642675c
Tweak the integral calculation so it is scaled in ms internally. This avoids a
...
loss of precision on the accumulation.
2011-06-24 10:38:25 -05:00
James Cotton
373689207a
Add a 1-tap IIR filter into the gyros in the feedback path. This will make the
...
stabilization output a bit more resilient to the high frequency noise from
gyros. However this value shouldn't be too high as it will increase the phase
delay of the feedback loop and decrease stability. Default is 5 ms.
Note: this resests the stabilizationsettings object. Sorry guys.
2011-06-24 10:38:25 -05:00
Mathieu Rondonneau
dcd2774103
OP-423 Fix some comment from code review:
...
- update example module
- use module init macro for POSIX and WIN to make code cleaner.
2011-06-24 06:59:51 -07:00
Corvus Corax
f52f6d30c6
VTalk (flight): Buffers allocated dynamically with size calculated by UAVObjGenerator. Support for tx packet sizes < object size.i
2011-06-24 02:08:20 +02:00
James Cotton
f6312c7798
OP-410 OP-333: Created an Axis-lock setting for stabilization
2011-06-23 14:51:18 -05:00
James Cotton
9aba787b02
OP-193: Check for instance read success was backwards
2011-06-23 03:01:37 -05:00
James Cotton
368d5b649a
OP-193: Output mixer should read from up to 6 accessory channels (may add more
...
in future).
2011-06-23 01:47:55 -05:00
James Cotton
493fcaef2a
OP-193 OP-511: Add settings to scale the camera input output range
2011-06-23 00:47:27 -05:00
Mathieu Rondonneau
0ff5e9a46f
Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint
2011-06-21 22:02:13 -07:00
James Cotton
8976d22fad
Merge remote-tracking branch 'origin/OP-159_os_sbus'
2011-06-21 17:51:22 -05:00
Mathieu Rondonneau
fc1e3f574c
OP-423: Split task create and module init in order to postpone task creation once the full heap is available.
...
Also implement some ordering (quite ugly still) in the module init and task creation order so we can decide which module to start/init first
and which module to start/init last.
This will be replaced/adapter with the uavobject list later (once it's implemented).
reserving some space for module init and task create parameters to customize module/task creation (this will be usefull once we get the list and customization from customer).
Changes have been made for OP and CC. Tested comped with CC,OP, sim_posix.
Only ran on bench with CC for couple of minutes (code increase expected but no dropping of stack which is good).
This gives task creation at the time wherethe all heap is available.
2011-06-19 22:35:40 -07:00
James Cotton
17fa227d1f
Fixed typo, thanks Os
2011-06-19 16:51:54 -05:00
Mathieu Rondonneau
5e3e7cc4e3
OP-423 Fix issue with init not properly started in the right order endup up object thinking other where not init.
2011-06-18 17:28:37 -07:00
James Cotton
5044ea36de
Start initializing objects in the modules that consume them. Shouldn't affect
...
OP yet but not tested.
2011-06-18 14:20:51 -05:00
Mathieu Rondonneau
b67a38661e
OP-423: merge master into that branch, resolve conflicts and test with CC and bl_CC
...
heap reamining is low (about 500) but stacks can be ajusted (specially the 200 bytes from system) to give the level close to 1Ko if needed.
Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint
Conflicts:
flight/CopterControl/System/inc/FreeRTOSConfig.h
flight/CopterControl/System/inc/pios_config.h
2011-06-17 19:04:09 -07:00
James Cotton
9720a8444f
Make a few things optional if they are mostly for diagnostics to keep memory
...
down
2011-06-17 21:00:21 -05:00
Mathieu Rondonneau
65cf467ca4
OP-423: move the module initialize funtion into a specific section for OP and CC.
...
- create linker section for those <module>Initialize()
- later this list will incorporate parameters as well. (this probably will be more a OP feature to swap/remove/delete module on the fly.
- this is not done at compile time anymore by Makefile.
- this will allow us to have control on the module start at run-time (not implemented but build the ground for it).
- this simplify the startup (Part of code re-org).
- this change does not affect sim_posix and win32 (since they don't need that)
- ensure it's compiling for PiOS.posix
- port to PiOS.win32 but not tested (not compiled)
- tested on CC
- compile on OP.
- this free ~200 bytes.
- current avalable bytes (is we keep the same remaining bytes on the stack than before) is easily passed the 1.2Ko mark on CC with new gcc (4.5.2)
- this does not include init-reorg for each module (I still think more can be freed)
2011-06-16 22:13:19 -07:00
Corvus Corax
926246b402
UAVTalk: Make UAVTalk object oriented, allowing multiple UAVTalk instances
2011-06-16 16:35:37 +02:00
Oleg Semyonov
d8201ec45b
sbus: provide a stub based on Spektrum driver (for CC only)
2011-06-15 22:35:21 +03:00
James Cotton
7d7d03cfd0
OP-193 OP-511: Basic code for camera stabilization. Currently tune range with
...
the servo endpoints and neutral.
2011-06-15 11:18:29 -05:00
Mathieu Rondonneau
7598e898fa
OP-423 Step-1: split system stack and implement water mark for IRQstack:
...
- use IRQStack for ISRs (at begening of SRAM) (let's call it the irq stack)
- use end of heap for stack needed during initialization (let's call it the init stack).
- the systemStats in GCS indicate the remaining bytes in the IRQ stack (this is realy usefull to monitor our (nested) IRQs.
This is the base ground to provide as much memory as possible available at task creation time.
Next step is to re-organize the initialization in order to move all the init out of the thread's stacks onto the init stack.
This will provide as much memory as possible available at task creation time.
Basically the stack during initialization will be destroyed once the scheduler starts and dynamic alloc are made (since the init stack is at the end of the heap). We will need to make sure we don't clobber the heap during initialization otherwise this will lead to stack corruption.
2011-06-12 20:23:00 -07:00
James Cotton
bdc9094975
OP-493 OP-505 OP-511: Make up to 6 accessory channels so some can go from
...
ManualCommand to a camera module and some could go from that camera module to
output (i.e. mixing of inputs to pan tilt with stabilization)
2011-06-06 10:56:31 -05:00
James Cotton
1ecd244aff
OP-493 OP-505 OP-511: Fixed bug with the direct mapping where it looked at throttle curve
...
source instead of directly bypassing
2011-06-06 10:53:55 -05:00
James Cotton
6c6906d61e
OP-493: Switch to using Accessory0:2 to match the InstId
2011-06-05 15:38:58 -05:00
James Cotton
99b3a629a8
OP-493: Force three AccessoryDesired objects to always exist. Routing to
...
Mixing channel now works. However Accessory desired instances do not show up
in GCS.
2011-06-05 15:38:58 -05:00
James Cotton
a1336e4d03
OP-493: Make sure accessory desired is not a single instance object
2011-06-05 15:38:57 -05:00
James Cotton
8ebd6a83d6
OP-493: Add support to bypass the mixer and route accessory data straight to
...
outputs. Warning: This has no failsafes like arming. We should discuss if
this is appropriate.
In addition accessory objects can be routed throught the mixer for collective
or flaperon.
2011-06-05 15:38:57 -05:00
James Cotton
a1d60cb77d
OP-493: Use multiple instances when using multiple accessory channels
2011-06-05 15:38:57 -05:00
James Cotton
1365542103
OP-493: Populate the Accessory Desired from TX
2011-06-05 15:38:57 -05:00
James Cotton
624baeda5c
Merge branch 'OP-423_Mathieu_GetSet_Uavobjects' into bugfix-flight
2011-06-05 09:48:22 -05:00
Mathieu Rondonneau
7b8d09371b
fixing minor compiler error/warnings when compiling OP with DEBUG=NO
2011-06-03 21:47:43 -07:00
Mathieu Rondonneau
31a06a5ae7
OP-423 add set/get uavobjects functions to access objects fields separately.
2011-06-02 21:18:34 -07:00
Stacey Sheldon
ac0eb3a5c7
Merge remote branch 'origin/stac_build-opf-image'
2011-05-26 21:29:53 -04:00
James Cotton
66b85acebd
Merge branch 'bugfix-flight'
2011-05-26 20:07:58 -05:00
Oleg Semyonov
36d2a467e0
manualcontrol: fix copy/paste error
2011-05-26 00:16:36 +03:00
Stacey Sheldon
96827eecff
build: Make all flight sw use pios_board_info_blob
...
Now that every bootloader build has a board info blob,
make all fw and bl images use it.
The following MACROS are removed:
BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION,
START_OF_USER_CODE, HW_TYPE
These values are now ONLY available from the bootloader
flash via the pios_board_info_blob symbol. These values
must not be #defined or otherwise hard-coded into the
firmware in any way. The bootloader flash is the only
valid source for this information.
NOTE: To ensure that we have an upgrade path from an
old bootloader (without board_info_blob) to a
new bootloader (with board_info_blob), it is
essential that the bu_* targets do not depend
on (or validate) the board_info_blob being present
in the bootloader flash.
2011-05-24 00:58:10 -04:00
dankers
5f32803763
Changed accelKp = 1; in 3C filter when calibrating bias when arming. Increase default yaw by 0.005
2011-05-17 04:15:28 +10:00
dankers
71d582495e
On arm bias calibration terms now matches boot calibration terms
2011-05-16 00:16:19 +10:00
James Cotton
b01e897e36
Merge branch 'OP-488_NeverHaltWhileArmed_James'
2011-05-14 17:21:05 -05:00
dankers
84e09031a7
Faster attitude calc, be much more aggressive with working out bias.
...
Change AccelkP to 0.05 to give accels more influence, just balacing out the 3C filter.
Change stab setting to be a better default fopr most Quads.
2011-05-15 05:58:58 +10:00
James Cotton
dbf8a77a94
Now there are other attitude settings (like rotation angle) make sure these are
...
loaded right away at power up
2011-05-13 07:24:44 -05:00
James Cotton
3d5244c4b8
Fix small typo THRSHOLD to THRESHOLD in gps.c
2011-05-12 18:57:16 -05:00
Corvus Corax
bce51d4258
OP-435 Optionally allow building of GPS without support for GPSSatellites and GPSTime UAVObjects to save memory
2011-05-12 21:00:59 +02:00
James Cotton
338d363289
When a channel is disabled in the mixer force the channel to have a 0 us pulse
...
duration. The default before was neutral in failsafe.
2011-05-11 20:09:28 -05:00
James Cotton
5d28276c49
Reshuffle memory allocation on CC after FlightStatus object introduced
2011-05-11 17:35:52 -05:00
James Cotton
fdd591b700
OP-488: If the FirmwareIAP receives a halt signal but system is not disarmed
...
abort the halt.
2011-05-10 14:40:21 -05:00
James Cotton
163d41fb60
OP-466: Make the test output panel work when there is not a valid mixer
...
configured. However unlike previous patch keeps alarms showing so you will be
unable to arm normally.
2011-05-10 02:43:55 -05:00
James Cotton
808e3c8ea2
Fix bug I made where guidance didn't look at new flight status object
2011-05-09 11:37:06 -05:00
James Cotton
4ec0263dfc
OP-476: If AttitudeSettings.ZeroDuringArming is true, then while arming (1
...
second) it will speed up the estimate of gyro bias.
2011-05-07 15:29:21 -05:00
James Cotton
8e06eb3162
Get the "IDLE_NO_LOAD" level closer for CC with optimizations on, but it would
...
be great if someone actually calibrated this for me!
2011-05-07 15:07:14 -05:00
James Cotton
10e55c25bc
OP-475: More changes to get the FlightStatus object to work for Armed and
...
FlightMode
2011-05-07 15:06:04 -05:00
James Cotton
80c839d5bb
OP-475: Starting to use the new FlightStatus object
2011-05-07 13:17:21 -05:00
James Cotton
e2819c6815
Restructure the ManualControlCommand code to be much more readable. Also
...
facilitates the new FlightMode object.
2011-05-07 12:43:27 -05:00
James Cotton
d1fb254a41
Merge branch 'master' into bugfix-flight
2011-05-07 06:56:54 -05:00
James Cotton
fef1e2dc2e
Merge remote-tracking branch 'origin/OP-174_Sambas_BaroAlt_to_ETOSD'
2011-05-07 04:41:13 -05:00
Corvus Corax
5f749dda7e
Modules/ManualControl: bugfix GCS Control was broken due to connection state and arming being checked outside of the "object_writable()? {}" if clause
2011-05-06 01:26:34 +02:00
James Cotton
7e418866be
Update the AttitudeSetting object to make the board rotation more human
...
readable and update the GCS fields appropriately.
2011-05-05 13:04:56 -05:00
James Cotton
dd36192e37
Merge branch 'bugfix-flight'
2011-05-05 00:36:55 -05:00
James Cotton
93d8449814
OP-474: When throttle < 0 and "spin while armed" mode enabled don't take into
...
account stabilization or stick - stay at neutral
2011-05-05 00:32:15 -05:00
James Cotton
05684e966b
OP-470: Make arm/disarm threshold 50% instead of 90%
2011-05-04 22:53:00 -05:00
James Cotton
401a989c63
OP-474: Add option to ActuatorSettings to allow people to request their propellers always spin an neutral when armed (I don't recommend this).
2011-05-03 00:08:39 -05:00
James Cotton
9daca1ac41
OP-469: Wasn't paying attention and missed a line
2011-05-02 22:22:57 -05:00
Corvus Corax
8d8144f233
OP-441 Prevent double alarm set ( setFailsafe() already sets alarm to CRITICAL )
2011-05-02 18:00:12 +02:00
James Cotton
9afedc0139
OP-469: Fix a bug I wrote where MaximumRate instead of ManualRate was used to
...
scale sticks in rate mode.
2011-05-02 04:33:32 -05:00
James Cotton
d9221fac06
Merge remote-tracking branch 'origin/OP-452_InputConfiguration'
2011-05-02 03:40:59 -05:00
David Carlson
341dbd7ad9
Change blink rate to Hz rather than 1/2 Hz. As per comments in review OPReview-18.
2011-05-02 00:50:42 -07:00
David Buzz Carlson
edd5ad8a78
Update Stat LED blink rate when armed to 5 Hz from its current 1 Hz. This allows a more drastic change in LED behavior to highlight that the aircraft WILL NOW CUT YOUR FINGER OFF IF YOU DON'T RESPECT IT!!
2011-05-02 00:50:42 -07:00
James Cotton
62e3d35a97
OP-452 Read the channel times even if a bad mixer is configured
2011-04-29 17:57:04 -05:00
Sambas
2413fd451f
OP-174 ET OSD: barometric altitude works now, units must be set metric with E-Logger
2011-04-29 19:08:28 +03:00
Corvus Corax
8c7f3e2720
OP-435 #ifdef covered one command too many - bugfix
2011-04-25 18:37:28 +02:00
Corvus Corax
eb9ccc2f9b
OP-383 Review 11 : Removed commented out unused variables as directed by review
2011-04-25 16:36:23 +02:00
Corvus Corax
cdb6b65e64
Merge branch 'master' into OP-383_Edouard_CPUSerial_in_FirmwareIAP
2011-04-25 02:36:44 +02:00
Corvus Corax
5d952f81e3
PIOS: BL_HELPER: refactored function names
2011-04-23 21:11:17 +02:00
Corvus Corax
150464344d
BL_HELPER: call CRC_Ini() from within CRC check function
2011-04-23 20:55:21 +02:00
Corvus Corax
357bc369db
PIOS: Bootloader Helper functions should sit in HAL, not duplicated in every single architecture.
2011-04-23 19:40:41 +02:00
Corvus Corax
192e31986d
PIOS, Modules/FirmwareIAP: Use correct HAL for CPU serial
2011-04-23 18:30:32 +02:00
Corvus Corax
2bf7ea2271
Modules/GPS: Make code to deal with home location optional to allow a sleeker GPS module for RAM challenged systems
2011-04-23 16:49:07 +02:00
elafargue
e4112e210f
Reduce size of FirmwareIAPObj to 40 bytes: only takes the 40 first bytes of the firmware description, ignores the rest. Makes the FWIAP UAVObject more decent size-wise, and does not break USB TX anymore.
2011-04-19 20:45:49 +02:00
elafargue
45e92d654e
Implemented support for the Unique STM32 CPU serial number in the firmwareIAP object.
2011-04-19 00:31:20 +02:00
peabody124
3afdc7e41c
CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS
...
config plugin updates. Has not been tested in flight yet although seems
sensible so please be careful when using this code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-15 06:37:16 +00:00
pip
33d9d31082
Modified manual control input value checking to determine RC connection state - was previously checking only the throttle channel for semi-valid input range, it now checks the Throttle, Roll, Yaw and Pitch channels for full-valid values (manual value is within min and max values).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3146 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 14:00:46 +00:00
corvus
da76192e47
Modules/Guidance: Bugfix in Position-Hold code
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3112 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-31 20:08:14 +00:00
peabody124
a57c289b3a
CC-24: Support mounting CC at any angle by applying a rotation. Now need to
...
rotate sensors to make sure stabilization behaves well so don't use till then.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3100 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 02:15:57 +00:00
peabody124
48c20d37a9
OP-349 CC-32: Added a Completed operation that is returned after successful
...
save or load
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3093 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 19:16:50 +00:00