rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-01 09:24:10 +01:00
Code Issues Releases Activity
5,029 Commits 5 Branches 8 Tags 266 MiB
1630267324
Commit Graph

2443 Commits

Author SHA1 Message Date
James Cotton
1630267324 Some small updates to 16 state INS 2012-04-03 03:42:23 -05:00
James Cotton
9e4651ab80 INS working on Revo 2012-04-03 03:42:22 -05:00
James Cotton
7e36d086de More work on INS algorithm to force constants to single 2012-04-03 03:42:22 -05:00
James Cotton
137429d92d More work for the simulation 2012-04-03 03:42:22 -05:00
James Cotton
96edea9d4b Some fixes to GPS parsing 2012-04-03 03:42:21 -05:00
James Cotton
55ee568fe2 Work on the INS algorithm 2012-04-03 03:42:21 -05:00
James Cotton
7034a45e44 Force more calculations to explicitly being float 2012-04-03 03:42:20 -05:00
James Cotton
8c8224c122 Use a bigger event queue for overo logging to avoid event system warnings, and 
add code to shortcircuit formatting a packet if it will not fit.
 2012-04-03 03:42:19 -05:00
James Cotton
e82323af32 Make revolution work with the FreeRTOS queue based MPU6000 driver 2012-04-03 03:41:52 -05:00
James Cotton
bb41bc1472 Add no for DIAG_TASKS to make file to make it easier not to miss. 2012-04-03 02:07:04 -05:00
James Cotton
d7cb232315 Add MPU6000 accel range to config structure. Also put in correct values. 2012-04-03 02:07:04 -05:00
James Cotton
3346e848e0 Attitude error timeout was 2 ms when sensors at 500 Hz. Caused lots of errors 
and overwhelmed event system.
 2012-04-03 02:07:04 -05:00
James Cotton
3f22ef8c66 Slow MPU6000 on CC3D to 500 Hz 2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6 MPU6000 accel value coming out twice as high as it should. Need to store scale 
in cfg structure to fix this properly.
 2012-04-03 02:07:04 -05:00
James Cotton
8032130769 Slow down gyro a bit on CC to give the CPU some breathing room. Might need to 
come down more.
 2012-04-03 02:07:03 -05:00
James Cotton
a960f3d07e Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code 
to take advantage of this.
 2012-04-03 02:07:03 -05:00
James Cotton
1415728762 Get the MPU6000 CC3D working. Right now the ADC system is commented out, which 
will break regular CC.
 2012-04-03 02:07:03 -05:00
James Cotton
a0b7453580 Make the firmwareIAP variable not a global 2012-04-03 02:07:03 -05:00
Stacey Sheldon
9b33be5d65 ef: pad any gaps between the BL bank and the FW bank 
The Entire Flash (EF) image for revo has a gap between
the end of the BL bank and the start of the FW bank.
This fills the gap with 0xFF and properly aligns the
FW image in flash.
 2012-04-01 22:39:27 -04:00
Stacey Sheldon
eab923fee0 revo: move fw image into 128KB sectors 
This saves the more versatile 16KB and 64KB sectors
for other purposes.
 2012-03-28 21:52:43 -04:00
Stacey Sheldon
f971fc14d5 openocd: update to latest git snapshot (f1c01333) 2012-03-27 00:53:27 -04:00
Stacey Sheldon
91cffb1809 f4 usb: don't skip yield from ISR 
Function was returning prior to the code that might
need to yield from within the ISR.
 2012-03-27 00:18:44 -04:00
Corvus Corax
0742c88a98 enabled optional rtation of Revolution board 2012-03-26 05:25:52 +02:00
Corvus Corax
d32dd0ccd4 Fixed fmod() versus fmodf() usage in flight/... 2012-03-26 04:16:54 +02:00
Stacey Sheldon
730defb698 f4 flash: fix flash voltage range setting in bl_helper 
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3.  Fix this to match actual VDD so we
get faster erase/write times.
 2012-03-22 22:37:31 -04:00
James Cotton
8059004755 Make sure if an event has a null handle and the queue is full we don't try and 
query UAVObjID
 2012-03-22 10:46:30 -05:00
James Cotton
c7ff2a46c7 Merge remote-tracking branch 'origin/laurent/modelview' into revolution 
Conflicts:
	flight/CopterControl/Makefile
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
 2012-03-22 02:58:24 -05:00
James Cotton
2f8049e20a Update the bootloader hw version for the mpu6000 board and make the sensor code 
and initialization respond appropriately.  Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
 2012-03-22 00:41:37 -05:00
James Cotton
e7ca02c038 Initialize mag before mpu6000. Seems more reliable but I don't know why. 2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b Reenable the pressure sensor and other modules 2012-03-21 00:49:29 -05:00
James Cotton
720684c248 Flag to enable pressure/mag 2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c Using some config switches to get this board up and running 2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3 Disable overosync by default. It was triggering event system warnings due to 
the extra updates from altholdsmoothed.  Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
 2012-03-21 00:29:09 -05:00
James Cotton
f4663b98e4 When the event system or object manager has an error store the object ID in the 
SystemStats.
 2012-03-20 23:18:07 -05:00
James Cotton
a319a6b14c Flags to disable mag/baro init 2012-03-14 22:35:09 -05:00
James Cotton
0d42303d37 Fix some compilation errors/warnings in attitude.c 2012-03-11 16:30:18 -05:00
James Cotton
c8d1534b87 Convert inline functions to static, let the compiler figure it out. Also some 
formatting since code was probably written with tabstop = 2 :)
 2012-03-11 13:18:08 -05:00
James Cotton
bbbca319d8 Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution 2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef Support for port remapping on serial ports 
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
 2012-03-11 18:38:49 +01:00
Stacey Sheldon
3782cdc58e bu: drop CC and PipX from BU targets since they don't build 
The CC and PipX bootloader updater (BU) builds don't currently
work due to some recent changes in how LEDs are handled.

Remove them from the default BU targets so that the all_flight
target can build clean again.

Also fix a linker warning in OP build.
 2012-03-10 20:41:15 -05:00
Stacey Sheldon
6038bfcb40 revo servo: swap servo pins 3 and 4 definitions to match schematic 
Note non-standard pin numbering on JP3 on the schematic.
 2012-03-10 15:06:21 -05:00
James Cotton
820ca6a970 Initialize loop variable OUTSIDE loop so that baro is used still for altitude 
hold.
 2012-03-10 11:28:51 -06:00
James Cotton
f4705551b6 Update task info to cover the AltitudeHold module 2012-03-10 11:14:30 -06:00
James Cotton
690f1b5f29 Enable camera stabilization 2012-03-08 01:37:34 -06:00
Stacey Sheldon
3210bd3f9c f4 usb_dcd: disable FIFO empty IRQ while waiting for tx completion 
CPU was being hammered with FIFO empty IRQs if we queued data but
the host wasn't actively draining the FIFO.

This was entirely unexpected so this hack should probably be
removed once we can figure out why this was happening.

This is almost certainly hiding some other issue.
 2012-03-07 20:36:37 -05:00
Stacey Sheldon
c4bd286739 f4 usb_hid: track whether we have buffers queued on endpoints 
Make sure we don't clobber our endpoint configuration by
double configuring an Rx or Tx buffer against it.  Wait for
the completion of the previous operation before allowing
endpoint configuration again.
 2012-03-07 20:36:36 -05:00
Stacey Sheldon
65fc6104e6 f4 usb_hid: ignore upper layers if USB IF not yet enabled 
Upper (COM) layer was calling down into the HID layer before
the HID interface had been enabled.  This was leading to
interacting with the endpoint Rx and Tx FIFOs prior to init.
The FIFO config was then being clobbered when we the USB IF
was eventually enabled.
 2012-03-07 20:01:35 -05:00
Stacey Sheldon
1f37806eab f4 usb_hid: fix typo in EP IN registration call 
Code was using the size of the Rx buffer instead of the Tx
buffer when registering.  Buffers are currently the same
size so wasn't causing any issues.
 2012-03-07 20:01:35 -05:00
Stacey Sheldon
bc3ee6209c f4 usbhook: drop in/out bit from EP numbers before using as index 
USBHOOK endpoint callback arrays should not be indexed with the
0x80 (in/out) bit set.  Oops.
 2012-03-07 20:01:35 -05:00
Stacey Sheldon
6832a62872 f4 bl_helper: clear all flash errors as we unlock the flash 
Error flags being set were causing flash erase operations to
fail.  Not sure why these flags were set though so this might
be hiding some other problem.
 2012-03-07 19:53:18 -05:00