James Cotton
497683e571
Fix OSX simulator
2012-09-18 13:29:11 -05:00
James Cotton
13e7733e5f
Merge branch 'revo-mini' into revo
2012-09-12 02:30:10 -05:00
James Cotton
88b483f37d
PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP
...
coordinate system
Previously there were hacks spread throughout to deal with various ways of
positioning the chips. Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.
This flag seems to do the right thing for Revolution, CC3D, and RevoMini
2012-09-11 01:46:22 -05:00
James Cotton
4cbaa6df88
Revolution: Misses some files for stabilization refactoring in Revolution
2012-09-11 01:44:40 -05:00
a*morale
316e02612e
mapped LED1&2 ports to output 9&10 so that it is possible to use as accessory or pwm buzzer
2012-09-10 20:14:15 -05:00
James Cotton
38e9d105aa
Merge branch 'pidt1' into test2
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-10 14:37:52 -05:00
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
James Cotton
b95a78cde5
Roll back changes on the revo target
2012-08-25 17:33:14 -05:00
James Cotton
982750a58f
Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-08-25 15:05:47 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
a*morale
789746151a
Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration
2012-08-25 11:29:01 +02:00
James Cotton
880eb5eb11
Fix revo for the removal of SDCard supprot
2012-08-12 14:45:06 -05:00
James Cotton
097ae637bf
Remove the TCHAIN_PREFIX flag from the OSX Makefile. No clue how that got
...
merged in.
2012-08-06 16:54:55 -05:00
James Cotton
f247443d64
Clean up the logging somewhat
2012-08-06 16:54:52 -05:00
James Cotton
9ce7d9b4ac
Add UAVOs for relay tuning
2012-08-03 09:37:44 -05:00
James Cotton
beb75f22cf
Remove the TCHAIN_PREFIX flag from the OSX Makefile. No clue how that got
...
merged in.
2012-08-02 10:40:40 -05:00
James Cotton
5e2c2a0ec3
Clean up the logging somewhat
2012-08-02 10:40:38 -05:00
James Cotton
d1e6dcc2f0
First pass implementation of William Premerlani's magnetometer bias correction
2012-07-25 11:07:40 -05:00
James Cotton
617de9c68b
Revert "Disable the FLASH_FREERTOS flag for revolution so that it doesn't try and use"
...
This reverts commit 7522bd07ba
2012-07-24 01:49:53 -05:00
James Cotton
7522bd07ba
Disable the FLASH_FREERTOS flag for revolution so that it doesn't try and use
...
vTaskDelay while erasing flash.
2012-07-23 09:42:53 -05:00
James Cotton
57a554f7ea
Enable the GPS UBX/NMEA support
2012-07-22 01:17:29 -05:00
James Cotton
93faf131b0
Merge branch 'next' into revo
...
Conflicts:
flight/Modules/GPS/GPS.c
flight/Modules/GPS/NMEA.c
flight/Modules/GPS/UBX.c
flight/Modules/GPS/inc/NMEA.h
flight/Modules/GPS/inc/UBX.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/waypointeditor/waypointeditorplugin.h
shared/uavobjectdefinition/gpsvelocity.xml
2012-07-22 00:43:19 -05:00
James Cotton
0c054a1e62
Speed up attitude loop on Revo to 666 Hz
2012-07-21 17:25:06 -05:00
James Cotton
bcdd5a8bba
Fixes to the overo module where it was thinking the fifo buffer writes failed
2012-07-20 13:45:31 -05:00
James Cotton
5091b16065
Needs work but it's sending data now
2012-07-20 11:36:49 -05:00
James Cotton
6b3e5573a0
The overosync module now uses pios_com interface.
2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6
Get the pios_overo driver for pios_com compiling
2012-07-20 09:32:22 -05:00
James Cotton
a6ba379af9
PIOS_OVERO driver which handles the communications to the overo and ensures the
...
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
5f337afb36
Add a setting to determine when the overo module logs
2012-07-14 09:21:38 -05:00
Werner Backes
7ef7b621d7
Reenable PIOS_GPS_SETS_HOMELOCATION on Revo.
...
Change-Id: I5a5e2ec0deb4241faad23f6fead5036b039bfbf9
2012-07-11 23:37:03 +02:00
Werner Backes
19a9cd03c2
Introduced GPSVelocity UAVObject
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-07-10 16:23:10 +02:00
Werner Backes
10351e61d4
Revert "Changed GPS port to be rx/tx instead of rx only"
...
This reverts commit e2a35d1f4c
2012-07-10 12:10:17 +02:00
Werner Backes
e2a35d1f4c
Changed GPS port to be rx/tx instead of rx only
2012-07-10 11:01:46 +02:00
Werner Backes
0424172398
Better separation between UBX and NMEA parser
...
Make GPS protocol a user selectable option
Support for UBX protocol on CopterControl
2012-07-10 11:01:41 +02:00
James Cotton
a28aac47b5
Strip down FW navigation to be supported by my simple scheme
2012-06-08 10:46:39 -05:00
James Cotton
4c3ca17e34
Backport the fixed wing path follower
2012-06-08 10:46:39 -05:00
James Cotton
574ab3fcaa
Make the VtolPathFollower an optional module
...
Note that RTH mode right now checks that throttle control is enabled, but this
should only occur if the system is a VTOL.
2012-06-08 10:46:38 -05:00
James Cotton
5e01617cbd
Merge branch 'next' into MikeL
...
Conflicts:
ground/openpilotgcs/src/plugins/config/airframe.ui
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
9f93c9cbec
Get PIOS_GCSRCVR working on revo
2012-06-04 09:48:05 -05:00
James Cotton
dc7fe1bdd8
Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had
...
to include uavobjectmanager.h manually which was weird
2012-06-04 09:48:05 -05:00
James Cotton
71e14a691e
Merge branch 'next' into revo
2012-06-03 19:00:51 -05:00
James Cotton
e8cf606f16
Add the chip size to the flashfs configuration (should probably go in the chip
...
configuration)
2012-06-02 11:00:42 -05:00
James Cotton
8a6073fbaf
Merge remote-tracking branch 'revo/revo-next' into testing
...
Conflicts:
Makefile
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/Revolution/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c
Merge remote branch 'origin/stac/etasv3' into revo-next
2012-05-28 12:56:27 +02:00
Stacey Sheldon
8d47dc1fe4
revo usb: apply recent hid+vcp decscriptor changes to revo
2012-05-27 21:35:13 -04:00
James Cotton
bbb14f5f14
Trying to get F4 PIOS_ADC working. Changed from previous implementation timed
...
by another timer to running continuously. May go back to the previous since no
need to get tons of data.
2012-05-15 03:19:44 -05:00
James Cotton
0a7f5fd5d3
Enable battery code again
2012-05-15 00:38:11 -05:00
James Cotton
46fc5fa4fb
Create a PathPlannerSettings object and move the PathMode setting to there.
...
Also add a (temporary) field to allow storing some custom paths to select on
the fly. Later will be replaced with some code to fetch from the flash chip.
2012-05-12 13:12:57 -05:00
James Cotton
836e34a483
Change revo sensors to update at 500 Hz and make sure in all cases it waits for
...
the relevant queue to provide data. Also disable the quaternion stabilization
flag.
2012-05-12 13:12:56 -05:00
