rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Code Issues Releases Activity
2,992 Commits 5 Branches 8 Tags 266 MiB
1e59cc79ec
Commit Graph

1572 Commits

Author SHA1 Message Date
edouard
3d7407a82a Latest improvements to GCS Uploader gadget... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2384 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-11 20:41:52 +00:00
edouard
c6e99a5c4f OP-260 Remove @Ref tags in the tooltips, thanks for pointing this out. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2380 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-11 09:02:57 +00:00
edouard
f7b5ebdcc5 Further fixes to Uploader gadget 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2375 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 21:26:26 +00:00
edouard
7aab98f3ee More checks on the uploader gadget, to prevent potential crashes in case something goes wrong when halting the board. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2373 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 20:12:12 +00:00
edouard
e6cf9bfece OP-255 Only listen to autopilot connection/disconnection events, not to user disconnect events. There is a (by default) 8 second delay between a user disconnect and an autopilot connection lost event. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2370 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 09:00:44 +00:00
peabody124
3abcfc9608 OP-251 UAVObject/WatchdogStatus: Sorry forgot files earlier for monitoring what 
triggered previous watchdog resets

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2369 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 05:42:57 +00:00
peabody124
bbbd9a10e3 OP-14 I2C Diagnostics: Improve the logging so that the events going into FSM 
are logged, and separately the erirq and evirq logs are exported

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2368 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 05:42:53 +00:00
peabody124
b173d74821 OP-237 I2C ESC support. This _will_ require you to reconfigure your 
ActuatorSettings although for PWM aircrafts it should be done exactly as before

Actuator: Store the update times and maximum update time

OP-14 I2C: Start tracking short history of events and states in driver for
logging
OP-237 Flight/Actuator: Support for I2C based ESCs

OP-237 MK_ESC: Send all four motors as one atomic transfer

OP-237 Flight/Actuator: Allow channels to be mapped to MK I2C interface.  Currently
mixer channels are either PWM or MK but in the future this will change to
support more than 8 channels.

OP-16 PiOS/I2C: Further work to try and make I2C more stable, mstly special case
handline in IRQ

OP-237 I2C ESC: Support for Astect 4 channel ESCs

OP-237: When the I2C Actuator write update fails track this

OP-237 Actuator Settings: Change the way motor types are selected to keep that
information more appropriately within ActuatorSettings instead of MixerSettings

Also make motors stay at or above neutral when armed and throttle > 0

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2366 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 01:11:44 +00:00
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have 
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 00:16:30 +00:00
vassilis
007f7cbea0 GCS/FlightPlan: Create FlighPlan module related objects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2363 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 22:28:39 +00:00
edouard
f7464557f2 Forgot to send the final version of the barometer (default set) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2362 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 22:19:10 +00:00
edouard
79f72bda47 OP-248 Enable serial device polling on Windows too as automatic detection seems to be unreliable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2354 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 18:43:03 +00:00
osnwt
9827746847 GCS/Windows installer: fixed working directory in shortcuts, added shortcut comments. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2353 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 14:13:48 +00:00
edouard
30b165c302 Update to Dials widget to check for NaN values in UAVObjects: a NaN can cause the GCS to freeze inside the dial repaint operations. This will ensure that the GCS does 
not freeze if things go south on the firmware.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2352 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 13:11:32 +00:00
edouard
79c4ba60f6 Explicitely close the serial port upon DFU object deletion. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2351 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 09:53:56 +00:00
vassilis
1bdc03bb1c GCS/UAVObjects: Added TaskInfo object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2348 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 23:40:49 +00:00
edouard
d6cb01edf2 OP-244 Attempt to solve the issue. Cannot reproduce on my system, but I have made a few changes to declare the OP_DFU::Status using the Q_ENUMS macro. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2347 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 13:22:15 +00:00
edouard
05de5492d9 Uploader gadget: on Reset, go through a board detection too, since it seems to be necessary to get a proper reboot of the ARHS too. Makes reboot over telemetry link work too. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2345 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-07 20:54:34 +00:00
edouard
c4b6b16181 OP-242 : Fix notify crash on Linux. Additional check on phono media object in the playback callback to avoid race conditions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2344 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-07 14:59:54 +00:00
edouard
489fde5357 OP-233 Further work on Temperature compensation for gyros (GCS config). Everyting is in place to sample data and compute the regression. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2343 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-06 23:43:03 +00:00
edouard
31d9230ad7 OP-233 Mock up of Gyro drift calibration interface added. Sliders will autoupdate when the temperature changes, and will 
compute the new drift value, with a button to update it. Will probably add an icon indicating whether the temperature difference
is large enough to compute a reliable drift.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2340 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 21:26:42 +00:00
edouard
02c261462d OP-233 Start reorganizing the UI for AHRS config, since it is becoming way to busy with all the calibration capabilities. Now using tabs, let me know if you like it. This is a work in progress. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2339 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 20:39:23 +00:00
edouard
609b244007 OP-234 Reset button now works again. Slightly tighter timing on board detection, if you get issues on Windows or MacOS, please let me know! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2330 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 22:03:27 +00:00
osnwt
b463bd2a09 GCS: Fixed config gadget description and some cleanup in *.pluginspec. No code changes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2329 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 21:52:21 +00:00
peabody124
30b122afa9 GCS/Config: Edit tab stop order to be more intuitive 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2328 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 17:30:09 +00:00
corvus
a59d08b7af AHRS: Support for Linear Temperature Compensation Factors for Gyroscope X,Y,Z 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2327 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-04 00:54:31 +00:00
martin
a0bf048090 Removed the default settings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2326 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 21:26:09 +00:00
corvus
5b9a50127f GCS: UAVObjectBrowser: Use new widget for editing floats that supports scientific notation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2325 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 15:29:02 +00:00
osnwt
b826d4e51f Ground: Windows NSIS multilingual installer script and resources. To build the installer one needs an Unicode NSIS package and optionally SubWCRev utility (part of TortoiseSVN client, also available separately) to embed some interesting revision info into the installer executable. Please help with translations of strings_xx.nsh (utf-8 files). Only English and Russian are currently translated. Initial installer language is detected automatically but can be changed by user. Some hooks to the GCS should be done to preset a language on the 1st run. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2324 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-03 03:13:09 +00:00
edouard
82f092f115 Serial plugin: small change to wait long enough for the Unix serial polling thread to exit - removes one warning on the logger. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2322 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 22:22:28 +00:00
edouard
6091f0be63 Bugfix for dials text and minimum range. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2321 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 15:11:37 +00:00
edouard
0e43a0af5b Updated the default OpenPilotGCS.ini to reflect the latest dial additions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2320 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 15:11:14 +00:00
edouard
9b61879146 New Barometer dial for the 'default' set. This one uses an experimental feature of the dials plugin, which enables the display of the value on the dial on top of the needle, let me know if you like it. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2319 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 14:49:17 +00:00
edouard
035c035f5b Added the barometer from the Deluxe set into the share directory. The default .ini file will be updated once all my work on analog dials is done. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2318 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 12:17:22 +00:00
osnwt
87b3d482d5 Ground: Some housekeeping for Windows packaging. No other changes. See also OP-92, OP-93, OP-221. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2317 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-02 00:32:09 +00:00
osnwt
2ea7f39b87 Moved remaining Wix installer files under Wix subdirectory. Also deleted DefaultSettings folder with files (they are not required anymore since included into the Core plugin as default settings). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2316 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-01 20:54:13 +00:00
edouard
0a554f79da Raw HID plugin: clean up debug output so that at least it does not use multiple lines. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2315 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-01 20:41:43 +00:00
edouard
a552addbf7 Updated the serial plugin to poll every 2 secs for new Serial ports on MacOS and Linux, where we don't get system events whenever a Serial/USB adapter is plugged in. No change 
on windows where the OS already told our plugin about such events. Polling thread is lightweight, no worries...



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2312 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-30 23:00:49 +00:00
martin
f25f4ef8bb OpenPilot.msi renamed to OpenPilotGCS.msi 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2310 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-29 17:54:24 +00:00
martin
b7e49c34d5 Wix installer scripts moved to subfolder 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2309 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-29 17:39:39 +00:00
edouard
a8bfce8418 Improved Uploader gadget user feedback so that operation success/failure is easier to notice. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2307 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 21:27:21 +00:00
andrew
eda227ec8b Added BatterySettings UAVObject in preparation for updates to PowerSensor code. 
As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2303 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 05:13:19 +00:00
andrew
76be2b991b Update to FlightBatteryState UAVObject in preparation for updates to PowerSensor code. 
As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2302 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-28 04:28:39 +00:00
edouard
dbd083caee OP-227 Fixes to support for translation. Tested OK on my system (Linux) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2299 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 22:09:25 +00:00
edouard
b8af9da689 OP-227 Basic implementation of support of language override in the GCS. The new preference is in the Environment/General dialog. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2298 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 22:02:36 +00:00
andrew
39cb30d56f Update to SystemAlarms UAVObject. 
Added:
Battery
Flight Time
I2C
GPS
Also added new alarm state of "Uninitialised"

no code to set these alarms yet.

As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2294 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 07:25:52 +00:00
andrew
bd5316eda0 Change to ignore the uninitialised state of a system alarm. 
This is in preparation for a future change.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2293 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 07:09:06 +00:00
andrew
cb5e3ef4b8 Updated system health diagram with GPS and I2C elements. 
This is in anticipation of updates to system alarms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2292 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 07:06:20 +00:00
andrew
cf72d545b7 Updated system health diagram with Power and Flight Time elements. 
This is in preparation for updates to the flight battery module.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2291 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-27 03:28:03 +00:00
edouard
284a1ebd2c Updates to Notify plugin, now works fine on Linux too. Should still be OK on Windows, please confirm... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2290 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-26 22:14:56 +00:00
edouard
398ae4f90a Notify plugin did not work at all on Linux due to hardcoded backslashes in the path. Now using Qt "native separators" to become multiplatform. 
One standing issue: the 1st second of the sound only is played...



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2288 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-26 18:55:28 +00:00
erhard
94721bf4cc OP-222 Ground: Load Default-Settings when no settings are present. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2287 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-26 16:21:49 +00:00
edouard
d1be74bcf4 Clean up HiTL plugin to remove old and unused files. You might have to clean and rebuild after this if you get errors. Made X-Plane HiTL bridge a bit more chatty at startup to help users. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2286 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-26 15:54:01 +00:00
edouard
d96a9aace9 OP-223 Basic support for X-Plane implemented. New Wiki documentation should be written, but basically: use 127.0.0.2 as the local IP, 127.0.0.1 as the destination IP, choose a (free) port as the input port which you will setup in the inet3 tab with dest address 127.0.0.2, and output port as 49000. Enjoy! 
One potential issue: X-Plane expects 4-byte floats, the code is potentially not 64bit compliant...



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2281 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-24 18:35:34 +00:00
edouard
4ee9cf7aad GCS/Config gadget: problem with GCS crashing on input channel assignement should be fixed. Was triggered whenever no input channel was assigned to flight mode, as Corvus found out, thanks! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2277 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-23 22:28:24 +00:00
vassilis
6799f75aeb GCS/UAVObjectGenerator: Calculate and report number of bytes used by the object fields. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2276 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-23 16:01:31 +00:00
martin
be4df7b757 changed scripts and added tools for creating multilingual installer 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2275 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 23:31:31 +00:00
pip
d072c30ba1 Settings additions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2274 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 22:16:44 +00:00
edouard
d72d4fa4d2 Freebie: implemented access to the UAVObject description in GCS-side UAVObjects, and added support for this in the UAVObject browser: leave your mouse over the name of a UAVObject and the tooltip will show the description. Nice, eh? 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2273 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 21:29:23 +00:00
edouard
bb1d5e8b2e Uploader gadget: Increased AHRS detection time a bit in Rescue mode to make its use a bit easier. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2272 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 16:38:38 +00:00
edouard
fc27419cf6 OP-220 1st attempt at "horizontal bias calibration" for the AHRS. Very basic calculation over 100 samples, be my guest to make it more sophisticated if necessary, all the basics are there, you just have to plug a better algo! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2271 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 15:31:37 +00:00
edouard
c6f14c7530 HITL: Flightgear: velocitydown was the wrong sign, so vario went the wrong way. Fixed now. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2269 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-22 09:19:25 +00:00
edouard
77f4fbe919 Fixed a rare issue with Heading becoming NaN and not checked by GCS (froze the GCS). Update op_dfu.cpp to reflect latest changes by PT_Dreamer on the CLI. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2268 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 21:10:31 +00:00
edouard
195c811c90 HITL/SITL: Flightgear now works in SITL mode with the current stabilization algorithm which includes gyro rates. Upped the rate for attitudeactual and attituderaw to a value which makes the stabilization algo work properly, will cause trouble on slow machines. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2267 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 20:21:00 +00:00
edouard
da3d4cdab8 GCS Control Gadget: After double checks on actual quad, correct pitch sign now implemented. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2266 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 20:05:56 +00:00
martin
390a355c57 Added "phonon_backend" and "phonon_backend" dirs 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2265 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 18:15:07 +00:00
martin
58152de093 Added phonon_ds94.dll 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2264 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 18:11:35 +00:00
zedamota
14ef24a3de OP-21/Bootloader - Maximize flash space available for user code. Bring back delay on HID send (board->pc) it still hangs when blasted with data. AHRS is now Readable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2263 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-21 17:25:24 +00:00
edouard
5748fe0e90 Add rotation rates into FG simulator to test Stabilization. Does not work well yet... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2262 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-20 22:30:42 +00:00
edouard
790637ba00 GCS Control gadget: invert the sign of pitch which was wrong. Bounding of values to -1/+1 so that it is not possible to put the red dots outside of the picture... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2261 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-20 17:30:38 +00:00
edouard
39d0b2e4a7 HITL: Flightgear did not work properly anymore in full SITL mode with the new throttling system (udp sent/received difference getting too big before FG sent its 1st packet). Fixed. Please report... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2258 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-19 21:14:07 +00:00
edouard
fc66814ed3 HITL: Flightgear plugin was broken, there was a missing space in the command line! Fixed now. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2257 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-19 17:56:22 +00:00
edouard
51089b40bc HITL Plugin: "start sim on local machine" settings was not saved, fixed it. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2256 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-19 17:51:27 +00:00
edouard
1ef88e854b OP-214 SSP protocol now implemented on the Uploader gadget, and board halt/reboot is now tested and working. Not tried an actual firmware flash yet, but if you do, please report (should work). 
I have done my best to make the interface foolproof, by only enabling the relevant buttons in the relevant situations, please let me know if this creates trouble in some use-cases I have overlooked...



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2254 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-19 14:42:47 +00:00
edouard
3d0e90e266 OP-214 Extend connection manager to tell interested plugins about the current telemetry method. Used for SSP on the uploader plugin. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2252 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-19 10:32:16 +00:00
pip
e84b222272 PipX modem settings update .. note that they do not yet function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2248 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 13:54:35 +00:00
peabody124
50b5d0d289 Ground/UAVObjectBrowser: Don't crash for undefined enum values, just say 
invalid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2244 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-18 07:09:32 +00:00
martin
3adf0e044e new default configuration 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2242 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-17 15:13:45 +00:00
peabody124
a66ce5c0a3 UAVObjects: Syncing changes with FirmwareIAP to the autogenerated files 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2240 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-17 07:02:41 +00:00
peabody124
4b4a66c2d7 PiOS/I2C: Lots of small changes. Added a few weird bus events that are 
sometimes thrown, and made errors not lock it up by default.  It works for me,
but since this has historically been associated with lots of lock ups please
check your systems carefully.

PiOS/I2C: Make the bus by default try to recover from errors instead of locking
up

PiOS/I2C: After a bus error and clocking all previous data create a STOP
condition to make sure bus is released (note, this also requires creating a
START condition first)

PiOS/I2C: If the same event hits the I2C bus twice in a row then disregard
second one, there is no situation where we should get the same event multiple
times that matters and this gets us out really quickly to catch the real
events.  I was seeing this with repeated 0x70084 which means byte transmitted.
This is related to STM32 bugs in the IRQ timings I believe.

PiOS/I2C: 1) Mask out some bits we don't care about in the event flags
2) Don't lock up if the give semaphore fails, although why it does is strange
3) Recover from bus failure through the "auto" state path instead of just
coding state

PiOS/I2C: Change the reset bus code to follow
http://www.analog.com/static/imported-files/application_notes/54305147357414AN686_0.pdf
(thanks for the reference Neontangerine).  Although this may actually NOT clear
the bus the first time through, subsequent bus errors should eventually clock
it out.  The up side is it is less likely to clock a bunch of 1s into an ESC
and make it run up.

PiOS/I2C: Some cleaned up code for getting a snippet of the history when
something strange happens

PiOS/I2C: Export logging information from I2C through a UAV object

PiOS/I2C: Improve the diagnostic information

PiOS/I2C: Need to handle the event 0x30084.  This seems to happen between a
byte transmitted and new byte started

PiOS/I2C: Handle the NACK condition by simply going to the stopping state.

PiOS/I2C: Add a new NACK state to handle sending the STOP signal after a NACK
following the STM documentation.  Other error conditions still are not dealt
with.

PiOS/I2C: Should handle the NACK condition from all the write cases.  Need to
think about read cases

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2239 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-17 07:01:58 +00:00
zedamota
c034a35d2c OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2238 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-15 19:06:28 +00:00
edouard
f7c824cdb8 OP-214 Start working on port selection within the Uploader widget to enable serial telemetry updates including rescue mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2237 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-15 18:39:04 +00:00
edouard
4be34fdb0f Modified all channel naming internally to use Channel 1 to Channel 8, instead of the previous convention of Channel0 to Channel7. 
BEWARE: I have not flown my quad with this code, so please be careful, test, and report!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2234 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 23:54:30 +00:00
edouard
9277968e55 OP-214 : Ported SSP capabilities to GCS Uploader gadget - SSP not active yet, but USB still works as before. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2233 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 23:44:31 +00:00
dschin
06c42702f9 UAVObjects: 
Add code to generate matlab code to convert GCS logfile to a matlab .mat file

Run OPLogConvert.m to convert log file
Then run OPPlots.m as an example of plots

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2228 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-13 03:03:24 +00:00
pip
08b43f5420 Updated UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2226 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 18:26:39 +00:00
pip
ed6b02fec2 Updated UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2225 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 18:26:26 +00:00
pip
6a44b0544b Updated UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2223 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 18:16:00 +00:00
pip
c01c69299c Updated UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2222 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 18:15:32 +00:00
andrew
c7eb0c912c GCS Control - controller now only updates the OP hardware when it is in GCSControl mode. 
Previously it would update all the time and this could create glitches in control when both a standard Tx and the GCS were connected to the flight H/W.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2221 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 04:57:43 +00:00
andrew
1007cbd115 GCS Control - Joystick buttons can now toggle GCSControl. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2220 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-12 04:09:32 +00:00
pip
5a0d9fb36c Adding PipX modem settings/status UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2217 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-11 10:56:07 +00:00
pip
5f6024c06e Adding PipX modem settings/status UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2216 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-11 10:55:34 +00:00
andrew
b48953a5b4 GCS control - implemented channel reversal for joystick input. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2215 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-11 06:39:05 +00:00
peabody124
7d70d1f9f2 Bootloader: A few cross-platform changes for the serial uploading functionality 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2213 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-10 20:19:28 +00:00
zedamota
eb01c55478 OP-21/Bootloader CLI- New version to be used with the new BL FW. Linux and MacOs Devs please test it, I'm having probs using serial port in unbuffered mode under Linux VM. I'm hoping its just a VM problem. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2212 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-10 19:16:09 +00:00
peabody124
771173a492 TelemetrySettings: Commit a change Pip forgot :-p 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2210 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-10 17:14:37 +00:00
andrew
901725a9db _GCS control 
fixed options panel so that user can only select 
1. axis for increase and decrease functions 
2. armed/gcs control for toggle function

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2207 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-09 06:54:33 +00:00
andrew
5f71795d67 Added -1 -> +1 bounding to button control functions 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2206 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-09 04:50:52 +00:00
sambas
c23df70b49 GPSposition trail added, quick and dirty copy/paste, but works OK. Needs settings for menus etc. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2204 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-08 19:36:02 +00:00
edouard
d8db3087ca GPS Display gadget: also display SNR above each satellite bar in the display gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2203 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-08 17:22:55 +00:00
edouard
970b155870 Add tooltips on the modelview gadget configuration page to explain more about VBOs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2202 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-07 22:23:04 +00:00
edouard
0fe666b7a2 Config gadget: Forward-pointing arrow on multirotor shapes in case those were ambiguous, and more tooltips for the servo config tabs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2201 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-07 21:40:54 +00:00
pip
dc58243b0f Forgot to commit a telemetry file after adding more telemetry baudrate options. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2199 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-06 21:04:19 +00:00
pip
72fab2f00b Added more telemetry baudrate options 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2197 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-06 08:31:01 +00:00
pip
4c08a4c2c7 Added more telemetry baudrate options 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2196 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-06 08:23:46 +00:00
edouard
f0bc081ae9 Disable actuator combo box on the config dialog, because of the risk of creating an inconsistent mixer. Letting the user change there was misleading. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2194 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-05 17:45:32 +00:00
edouard
476d548da9 Should hopefully make log/stop log operations more robust, as well as avoid crashing GCS upon exit in case the user did log during the session... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2192 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:39:32 +00:00
peabody124
6f1e7b4e41 AHRS: Add a configuration to export the sensor data either with or without INS 
bias correction.  This is useful for stabilization to get rid of the gyro bias.
Making it an option is important for calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2189 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:25 +00:00
peabody124
a04e33ccc6 OP-192 Flight/ManualControl: Add an ArmedTimeout field to the 
ManualControlSettings so that planes can disable the timeout
feature for gliding (holding roll on a plane not so good).

Note: This will require you to reconfigure your ManualControlSettings

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2185 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:16 +00:00
edouard
477657ea6e Logging plugin will refresh all the settings if telemetry is already connected, so that the log file always contains all the setting objects, which is vital for post-flight analysis. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2184 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 16:47:55 +00:00
edouard
327252f5c0 Fix for objects not getting updated properly upon USB connection: please please report how this works for you! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2183 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-02 07:36:38 +00:00
edouard
3069f81000 Modify AHRS config gadget so that Mag variance gets graphed in a meaningful way. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2180 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-01 19:28:09 +00:00
scott
8532bdfe28 An example batch file for starting Flightgear as a stand-alone app on Windows. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2179 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-29 23:34:03 +00:00
dschin
18809ce3dc AHRS - fixed time constant of baro altitude offset filter, added the offset to the EKF dump 
Added new EKF data parser (m-file) to ground



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2178 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-29 23:28:38 +00:00
scott
a4ba7fcbee Added option to start Flightgear 1.9.1 simulator as a stand alone application, optionally from a networked computer. Also enabled joystick input to control flightgear for complete manual control and debugging purposes. Joystick needs to be connected and armed in the GUI. Tested on WinXP. UDP receive needs more testing on linux. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2177 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-29 17:05:53 +00:00
sambas
bf8b9fd00c OP-51: GCS Antenna Tracker plugin, My (first) quick tester plugin for antennatracker. Not included into build. Heavily based on gps display plugin. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2176 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-29 16:41:53 +00:00
edouard
45b216bf57 OpMap: now the HomeLocation is updated following the actual UAVObject value. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2170 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-27 20:13:32 +00:00
edouard
02366bf368 OP-35 Further cleanup of Uploader gadget, better debug messages, more reliable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2169 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-27 13:44:16 +00:00
edouard
a9cd9ac329 OP-35 Fix to .pro file for Windows. OK, I'll get a Win7 environment going for pre-commit checks... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2168 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-27 09:39:01 +00:00
edouard
9407eee059 More cleanup on opmap gadget, should fix Win compile errors? 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2167 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-27 08:59:52 +00:00
edouard
353cc99227 Removed unnecessary entries from the opmap.pro (commented out) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2166 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-27 08:45:23 +00:00
edouard
63c3799521 OP-35 Cleanup of DFU object management, I think I have fixed all the potential segfaults, prove me wrong! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2164 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-26 23:20:17 +00:00
edouard
6ab6f3e84a OP-35 Now display a picture of the board layout for each device that is detected. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2163 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-26 22:49:50 +00:00
edouard
b840c5ec40 Update ActuatorSettings to remove obsolete fields. 
YOU WILL NEED TO RECONFIGURE YOUR ACTUATORS!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-26 20:55:05 +00:00
peabody124
ebcb272da6 AHRS: Add a separate parameter for velocity and position variance and remove 
indoor from the name since it's used for both indoor and outdoor mode now.
Increased default value to 0.4 to better reflect the GPS accuracy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2156 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-26 15:57:08 +00:00
edouard
0c39ead89d OP-35 Only do a 'verify' operation if the device is readable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2152 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-26 10:44:05 +00:00
edouard
f759998f3b Update to the OPMap gadget: removed waypoint support, since it is out of scope for v1.0. 
Besides SVN revisions, I also added a backup .ui file for the waypoint-suuporting UI.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2151 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-26 10:23:02 +00:00
edouard
fadb00860a Update to map library to avoid unnecessary redraws of the map and UAV icon when updating the UAV position & rotation which caused high CPU usage on the GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2139 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-23 16:41:42 +00:00
edouard
d233d65e86 OP-35 Update to GCS Uploader plugin to reflect latest BL changes. Bug fixes too, should be more stable & reliable. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2138 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-22 22:31:59 +00:00
zedamota
063d517ae7 git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2135 ebee16cc-31ac-478f-84a7-5cbb03baadba 2010-11-21 18:45:11 +00:00
zedamota
67c579a6f8 DUMMY commit, just to find out my lost password 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2134 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-21 18:16:16 +00:00
zedamota
ec1cea09c6 DUMMY commit, just to find out my lost password 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2133 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-21 17:52:03 +00:00
edouard
05d8e2e36a OP-35 : Attempt at implementing a "Manual" mode which guides the use to get into AHRS + MB BL Mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2130 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-18 23:53:13 +00:00
andrew
884421d5e6 comment out sendReset command so that the CLI tool will upload firmware to hardware. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2128 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-17 06:04:50 +00:00
zedamota
fb21b141ba OP-21/Bootloader - fixed compile issue. Added user space reset function. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2125 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 20:30:30 +00:00
edouard
ecb5c719d2 Get rid of yet more compile-time warnings. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2124 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 15:25:14 +00:00
edouard
37a1f602b2 Remove compile-time warning to Raw HID plugin as well. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2123 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 15:03:45 +00:00
edouard
fbcce4a005 Remove compile-time warning for serial connection plugin. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2122 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 15:03:18 +00:00
edouard
e1f61b0dee OP-202 Sorry, this is where the logging entries get moved, not previous commit.. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2121 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 15:02:47 +00:00
edouard
c463abab93 OP-202 Cleaned up the 'File' menu and removed (commented out) the entries which are not doing anything. "Save All" now saves the current GCS config so that everything is not lost in case of a crash. Easy to revert in case you don't like it. Also: 
moved the logging menu entries to 'tools' where I think they belong - comments welcome - and also small change to iconnection.h to remove compile-time warnings.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2120 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 14:58:16 +00:00
edouard
213e582f56 OP-99 Add a Path chooser to the name of the INI file for better ease of use. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2119 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 11:13:10 +00:00
zedamota
b8b1fd61b7 OP-21/Bootloader - crude C++ implementation of Kokomo's classic C serial protocol. It will be used on the Bootloaders serial comms. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2118 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-14 00:46:12 +00:00
edouard
ec994ec2c0 Capitalize some filenames to match the 3DS references and make it working on Unix machines (Linux in particular). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2117 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-13 17:55:50 +00:00
edouard
e787d6b02b Updated Deluxe thermometer dial (needle was not rotated properly). Fixed now, works perfectly! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2115 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-13 17:41:58 +00:00
martin
73ad3d1b96 moved default_background.png 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2113 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-13 04:53:33 +00:00
martin
acd697a030 Removed QYmodem.dll 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2112 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-13 04:52:41 +00:00
peabody124
6ebc8ccd57 OP-163 Flight/Guidance: Add variations on position hold to try out. Only one will end 
up in the final code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2110 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-12 16:57:13 +00:00
peabody124
5850c1804d OP-199 Flight/Stabilization: Increment a counter in actuatorDesired whenever an 
update takes longer than 15 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2109 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-12 04:36:04 +00:00
andrew
ca16298793 OP-138 Minor changes to UI layouts to scale better. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2104 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-11 07:34:27 +00:00
andrew
ac42393502 Updated GCSControl configuration page for button input support. 
Basic functionality now implemented.
Still need to add range checking and user settings verification.
not all toggle functions implemented yet.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2100 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-09 05:50:16 +00:00
ligi
f5f3b7d8e6 doing "TODO: Only write file if modified" 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2098 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-09 04:27:36 +00:00
ligi
a9ba6464d1 be verbose with a warning if reading of a file fails 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2097 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-09 04:24:04 +00:00
andrew
8e3813327c Updated GCSControl configuration page for button input support. 
Saving and recalling of settings now works.
Functionality not implemented yet

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2096 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-09 03:55:04 +00:00
andrew
fab0e6247a Added new tab to GCSControl configuration page for button input support. 
Only the framework for now.
Functionality to follow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2095 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-08 06:04:52 +00:00
andrew
1dae56ae3c Modified UI for ccpm to scale better and have less wasted space 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2094 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-08 06:02:43 +00:00
edouard
3c4a5a04c0 GCS Control plugin: now fully configurable (mode 1 to mode 4), and with joystick channel mapping as well. Not tested in-flight! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2093 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-07 22:16:45 +00:00
edouard
d826350b26 Control gadget: channel 4 was commented out for tests, re-enabled it. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2091 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-07 15:22:45 +00:00
edouard
1ed26a8514 Control gadget: make it configurable. Mock-up of config interface included, does not work yet. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2090 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-07 15:16:58 +00:00
corvus
800eb5320e HitL - some fixes to prevent EventSystem Overload 
Hitl IL2 - prevent NaN numbers from getting produced


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2085 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-06 15:17:33 +00:00
edouard
489e22f0ba Put the new Thermometer "Deluxe" dial into the share directory, thus making the "Deluxe" set as complete as the others! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2084 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-06 14:27:46 +00:00
edouard
f1c31d422e OP-35 Big refactor and update of the DFU object. Upload/download operations are now asynchronous and do not freeze the UI. Firmware download implemented. More details and explanations for each step of operations. 
I have updated the firmware on my mainboard with success several times on this, but it might very well destroy your board right away, just be cautious!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2083 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-06 14:17:21 +00:00
zedamota
229f772612 OPMapLib test app - To use: 
1- Copy folder to ../opmapcontrol/src/
2- Uncomment "SUBDIRS +=finaltest" on src.pro file
3- Uncomment "DESTDIR = ../build" on mapwidget.pro file


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2080 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-05 23:41:55 +00:00
edouard
055b95461d Fix big bugs with speed and altitude display in the PFD code; They should now work again properly, i.e. speed in km/h and altitude in m. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2079 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-05 21:50:44 +00:00
peabody124
c5ff7ca5a8 Ground/Joystick: Make the joystick only update at 50 hertz to keep telemetry 
reasonable

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2077 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-05 14:28:18 +00:00
edouard
6cccb2d86c Attitude Deluxe dial updated, and validated on GCS: works with same IDs as the other 
dials (background/foreground, needle and needle3).



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2074 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-04 14:24:09 +00:00
muralha
7a8484edfb Ground/ModelView: Fixed attitude rotation of the 3D model. 
Euler rotation has problems with Yaw, so now it's using quaternion rotation.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2064 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 22:20:45 +00:00
edouard
48a3b6c569 OP-35 Firmware upload works (tested on mainboard). Use at your own risk! Not threaded yet, so UI kind of freezes during the process, but it works. Don't blame me if it fries your board, though... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2063 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 21:41:32 +00:00
edouard
ae22e9103b OP-35 Cleanup of the uploader gadget, and removal of the ymodem library which is not used anymore. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2062 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 18:46:17 +00:00
andrew
3e5797a8d2 Update the curve generation UI to have range of -1 to 1 for the pitch curve widget 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2061 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 04:30:54 +00:00
andrew
0a2cfbacc7 Updated MixerCurveWidget so that it can have ranges other than 0 to 1. 
Default behaviour not changed.
New functions allow the setting of the max and min values for the curve.
0 to 1 range is needed when output is used for motors.
-1 to 1 range is needed when output is used for a servo.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2060 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-03 03:38:22 +00:00
edouard
7180c4fe2d OP-35 Further work on uploader gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2057 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-01 20:50:59 +00:00
edouard
1e0c2eef22 OP-35 Boot button enabled, to get out of bootloader mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2056 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-01 20:02:59 +00:00
edouard
8d2c9c37fb OP-35 Fix complile issue on Win7 (please confirm), Halt button now puts the mainboard into bootloader mode. Nothing more... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2055 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-01 18:15:48 +00:00
edouard
e74927c244 OP-35 Uploader gadget: the "Reset" button now works. YMMV, please report. Other buttons do nothing so far. Also, small fix to uavtalk.cpp where a 'disconnect' call triggered segfaults on my system. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2054 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-01 14:06:33 +00:00
edouard
b4a22c5984 OP-35 New methods to suspend and resume USB polling by the Raw HID plugin. Required for the Uploader plugin. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2053 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-01 13:35:12 +00:00
edouard
f19439b1c7 OP-35 Add new method to connection manager to let a plugin initiate a disconnection. Needed for Uploader plugin. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2052 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-01 13:34:27 +00:00
edouard
dde66a3c24 OP-35 Preliminary work on the new DFU gadget. Not much to see so far. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2050 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 22:56:31 +00:00
edouard
6e0332eb10 New simple quad (X and +) design by Muralha, and series of simple backgrounds for the modelview gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2049 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 21:14:24 +00:00
sambas
634543dc27 OP-52 Ground/GPS Display: some updates, ZDA&VTG 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2048 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 08:01:56 +00:00
andrew
206700830e Minor UI changes to ccpm config 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2047 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 06:10:19 +00:00
andrew
bc8ec75ed5 Updates to ccpm mixer ui. 
the curve settings now update the MixerCurveWidgets when generated or manually edited.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2046 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 05:55:23 +00:00
andrew
beda5965bf added function to MixerCurveWidget to update an existing curve from code without deleting the existing one. 
Using the initCurve function to update a widget that had a slot connected to its curveUpdated signal caused the app to crash.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2045 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-31 05:54:10 +00:00
pip
b6c0344a0f Added extra error checking - making sure the packet size is valid and that packet sizes match. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2040 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 15:00:55 +00:00
edouard
a05ed34e77 OP-138 Get rid of object scene removal warning on curve widget. Also delete objects properly when reseting the curve. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2037 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 10:41:41 +00:00
edouard
88a199d20e OP-138 Finishing touches to the custom mixer editor (curve reset buttons, value displays, etc.) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2036 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 10:16:01 +00:00
andrew
c7b6341b21 Improvements to the ccpm curve mixing UI 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2035 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-30 05:15:39 +00:00
edouard
dbe20a7eab OP-138 Editing of Custom mixer table checks for bounds (-127/127), and sending to ram/sd now works. This interface 
should be more user friendly that the uavobjecteditor.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2034 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-29 22:36:31 +00:00
edouard
739f4e468f OP-138 A few missing bits in the tricopter mixer settings, sorry... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2033 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-29 20:41:58 +00:00
edouard
e528cc306b OP-138 Support for Tricopter with yaw channel in the config gadget. Please please double check the mixer before flying, this is untested! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2018 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 21:54:42 +00:00
peabody124
aada18a0ea UAVTalk: Update protcol version number to go with new packet format and changed 
a few constants to make it self documenting

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2017 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 17:41:41 +00:00
peabody124
4570d6df23 UAVTalk: Insert a sync byte (0x3C) and the packet size to facilitating handling 
by PipX modems.  This is a change to UAVTalk so GCS and the hardware must all
be updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2016 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 17:16:29 +00:00
peabody124
4d7e053e06 AHRS Debugign code for dumping the EKF and importing into Matlab 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2013 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 14:31:34 +00:00
peabody124
2019edd612 AHRS: Store running time to make detect resets easier. Update OP and AHRS in 
parallel for this update.  Also removed comment for rawhid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2012 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 14:31:32 +00:00
edouard
a568e27703 OP-180 Implementd a setting to disable PFD smooth updates. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2010 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-26 20:19:43 +00:00
edouard
d232461f9d OP-138 All multirotor frame types except Tricopter now supported, but... not tested yet! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2008 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-25 21:55:04 +00:00
peabody124
c2474a4c08 Ground/rawhid: Fix mutex deadlock condition 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2007 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:56:40 +00:00
peabody124
aed2a1ee2e Ground/rawhid: Cleaned up the code related to disconnceting USB device 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2006 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:07 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of 
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:02 +00:00
peabody124
488ae158c8 Ground/rawhid: Add mutexs between write and read from buffersi. Fix bug that 
dropped some data by reading too much from buffers at variable rates.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2002 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 01:35:28 +00:00
ligi
cc497c43dc check if opening a device worked / prevents segfaults ( e.g. failing BT connection ) & checking if my svn account works ;-) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2000 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-22 11:17:48 +00:00
edouard
9ad1618739 OP-138 Quad and Hexa implemented, custom table works (read only, not edit), and code improved to enable definition of matrices 
in simple tables instead of ugly lines of code. Testers needed. Cautious testers. Also reshuffled the AHRS UI to put 6-point above sensor noise.
Next will be octo and coaxial frames.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1999 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-21 22:05:07 +00:00
sambas
d6e9080ec6 Ground/rawhid: quick hack to help on usb unplug freeze, need to make proper error handling 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1998 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-21 14:11:53 +00:00
peabody124
f618e6fffc Ground/HID: A few tweaks to the HID code, especially for mac, and make sure it 
never tries to transmit too much data

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1995 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-20 05:21:23 +00:00
andrew
2a47f4baca more modifications to UI for ccpm mixing. 
will now read back mixer settings from the flight hardware and try to determine the swashplate config automatically.
Looks good but only basic testing performed so far.
this has not been tested for flight in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1994 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-20 05:04:19 +00:00
peabody124
33c5877031 Ground/rawhid: A small change to OSX serial number handling to be more 
"maclike" and correct

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1988 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-18 00:50:51 +00:00
muralha
28c3dcf771 OP-150 GCS/ModelView: Create a fallback default setting on the ModelView plugin 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1987 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-18 00:08:31 +00:00
pip
253d831fc9 Added more lat/lon range checking an nan prevention. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1986 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 20:37:41 +00:00
pip
e0f399e333 Forgot to include altitude nan value prevention. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1985 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 20:24:23 +00:00
pip
e9c0b9455f Added lat/lon/alt range checking. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1984 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 20:09:54 +00:00
pip
1f3d45defd Fixed map mode UI opmap button states. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1983 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 19:21:38 +00:00
edouard
da84b1fc76 OP-138 Custom airframe table now displays the generated mixer matrix and curves. Display only, editing it won't change the mixer. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1982 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 19:15:05 +00:00
pip
ac53d71877 Forgot to disable the manual home location move ability. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1981 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 18:32:57 +00:00
sambas
8c46d22aa7 OP-169 hitl/FlightGear fixes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1980 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 17:37:51 +00:00
pip
dc943baeaa Disable manually moving the home location on the opmap (for now). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1979 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 17:34:39 +00:00
corvus
8aecc1ec0a OP-169: Hitl: IL2simulator - updating new UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1978 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 16:55:18 +00:00
edouard
bdba5c9168 OP-138 Config gadget: display the new multirotor shapes. Mixer code is not done yet! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1976 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 15:11:37 +00:00
pip
3f6796138e Updated UAV lat/lon/alt value requesting code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1975 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:36:41 +00:00
pip
658f9046d2 Added UAV Yaw/Heading code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1974 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:23:13 +00:00
edouard
91695b4e7d Update UI for dials plugin for up to 5 decimals for factor. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1973 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:20:53 +00:00
edouard
82b702e239 Added the new Multirotor shapes to the SystemSettings object, as discussed on the forums. UID has not changed, but you should recompile still (sorry). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1972 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:15:47 +00:00
sambas
ef83d7a8ec FlightGear homelocation set 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1971 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:05:01 +00:00
corvus
ff87e8bd79 IPConnection telemetry module: Rev 1342 introduced a serious deadlock bug due to incorrect usage of QReadLock where a QMutex should have been used. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1970 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 22:29:19 +00:00
zedamota
41388d97bd OP37/GCS MapLib - Change to try lowering processor usage. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1969 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 21:10:29 +00:00
corvus
c067552f74 OP-169: HiTL - il2simulator now updates attitudeRaw 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1968 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 20:04:46 +00:00
corvus
ebae3ffa40 OP-169: HiTL: Added AttitudeRaw UAVObject to HiTL core, updated UAVObject update timings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1967 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 18:25:21 +00:00
corvus
82c533e914 OP-169 - HITL - hitl core is set up to update PositionActual, VelocityActual and HomeLocation - il2simulator.cpp is updated to set those correctly 
(status: compilation OK, function yet untested)
xplane and flightgear yet need to be fixed
Note: I needed to change /libs/utils/coordinateconversions.h to have access to previously protected utility functions used to convert LLA to ECEF/RNE for HomeLocation
Code for this is "inspired by" flight/OpenPilot/Modules/GPS


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1964 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 14:30:36 +00:00
andrew
593c947f5e minor modifications to UI for ccpm mixing. 
better integration into config gadget (now only one set of buttons)
this has not been tested with hardware in it's current form.
Still need to make UI small screen friendly.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1963 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 14:05:51 +00:00
edouard
d8086d6b72 OP-138 Small updates to config widget, start of custom configuration interface, lots of work to do still... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1961 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-14 21:48:58 +00:00
edouard
f2681ef2c4 OP-138 Feed forward tuning is now working. Watch out for stray props! For safety reasons, the FF tuning will only run if all three checkboxes are checked. Otherwise, follow the tooltips (or the new wiki). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1957 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 21:09:53 +00:00
andrew
9aae70fedf Most functionality is now in the UI for ccpm mixing. 
Currently this will not update hardware correctly... 
but it will set the matrix under the Advanced Settings tab.
Do NOT use for flight!

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1952 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 06:06:32 +00:00
banigreyling
2d0196a5ea OP-42 GCS/Scope: Removed some code that was required for earlier config version upgrade. This code is not required anymore. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1951 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-13 05:47:06 +00:00
edouard
c2664a7843 OP-138 Various updates to config gadget: new quad shapes in the artwork, new tooltips, and start of the feed forward testing interface, with foolproof user safety (tm) built it... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1950 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-12 21:41:06 +00:00
dankers
c2db00fb40 Update Credits, add ttf with Logo for Altium. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1947 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-12 07:34:10 +00:00
andrew
093e475dfc continued modifying UI for ccpm mixing. 
NONE of this has not been tested with hardware in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1946 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-12 05:12:56 +00:00
edouard
1824440c8e OP-190 Added support for the flightmode switch settings in the config gadget. Let me know if you like the UI! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1945 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 19:03:27 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 17:58:11 +00:00
zedamota
1f6f5fe674 OP37/GCS MapLib - Fixes auto find google maps version. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1943 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 14:15:31 +00:00
andrew
f7bf258a50 Started to modify UI for ccpm mixing to integrate it into the look and feel of the config gadget. 
Most of the functionality has not been implemented yet.
NONE of this has not been tested in it's current form.
Use at own risk! 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1942 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 05:34:52 +00:00
zedamota
d64892069a OP37/GCS MapLib - Update to new google maps versions. Fixes safe area size update with digital zooming. 
TODO: fix auto find google maps version.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1941 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 23:27:03 +00:00
martin
ccdc107ad8 Redesigned dialogs. 
Added chinese installer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1940 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 23:23:31 +00:00
edouard
4ec3f3fe4c OP-138 Hexacopter support in the config gadget. NOT TESTED on a real frame, do it at your own risk... and report, please! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1939 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 13:45:10 +00:00
edouard
64fb124856 OP-138 Update fixed wing mixer computations to be compatible with the -127/127 range as per the latest UAVObject updates. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1938 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 12:56:44 +00:00
edouard
4dae7ef2df OP-138 Multirotor mixer supports adjustment of weight of Roll/Pitch/Yaw on quad + and X configurations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1937 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 12:04:05 +00:00
edouard
706e418990 OP-138 : integration of Andrew's Heli mixer UI into the config widget. Not very well integrated, but the code is there, will improve over the next few days. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1936 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 08:02:44 +00:00
pip
d11e9c56e5 Removed center maguc waypoint to map 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1935 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 07:42:41 +00:00
pip
3a2fe4587d Fixed usleep windows compile problem 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1934 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 07:32:59 +00:00
peabody124
5f601bf5ab Flight/Guidance: Enable for any type of quad airframe 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1932 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:04 +00:00
peabody124
e72b6051b5 AHRS: Make mag variance account for the vector length of magnetic field. Also 
moved around where the axis are swapped and made the negative sign come from
calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1931 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:01 +00:00
pip
fc0f0761a0 Added distance and bearing info of mouse or waypoint from home position. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1930 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 21:01:33 +00:00
pip
54af7e5753 Fixed mouse over waypoint problem - by setting their z values higher than any other graphic items on the map. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1929 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 18:59:19 +00:00
pip
cad8644a47 Added MoveToMagicWaypointPosition function and GUI button. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1928 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 13:36:21 +00:00
pip
676166f045 Added UAV trail settings onto the right-click context menu on the map. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1927 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 12:29:30 +00:00
pip
34dffe73de Fixed a few mouse position problems. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1926 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 10:23:29 +00:00
pip
c75628c018 Added public "GetFromLocalToLatLng" function to allow widget point to lat/lon coord conversion. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1925 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 10:09:49 +00:00
darkz
9a90a124fd Ground: Updated Hitl plugin and FlightGear to provide PositionActual. 
Currently the only value that works is PositionActual.Down wich is mapped to the altitude.
PositionActual.North and PositionActual.East are hardcoded to zero.
Also defined M_PI as it said it was no defined.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1924 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 08:52:19 +00:00
darkz
6e34b78b85 Updated Hitl module and FlightGear to Provide VelocityActual. 
Tested with FlightGear 2.0, But should not break 1.9.1, please provide feedback if anithing odd happens.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1923 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-09 00:59:14 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:23 +00:00
peabody124
9ec694cc40 Ground/AHRSCalibration: Account for conversion in AHRS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1918 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:16 +00:00
pip
a081fb7ec1 Added Safe-Area options onto the right-click context menu. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1917 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 08:47:31 +00:00
pip
c13816db20 Fixed SetSafeArea parameter - it was BOOL but should be INT. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1916 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 08:43:39 +00:00
pip
cc584be136 Added magic waypoint buttons, added 'set home location' on right click menu. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1915 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 08:03:09 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 13:09:35 +00:00
pip
3079476bb0 OPMap gui style updates 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1912 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 10:24:42 +00:00
pip
1741825ee2 Added 'map modes' to the opmap plug-in. "Nomral map mode" and "Magic waypoint map mode". Not yet complete! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1911 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 07:09:00 +00:00
pip
69d2e8828f Added two emit signals for when a waypoint is dragged around the map witht he mouse. Made the waypoint 'picture' object public (temp). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1910 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 07:06:18 +00:00
darkz
5c9b09a72d Removed the example ovjects references on ground/src/plugins/uavobjects/uavobjects.pro 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1908 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 03:23:45 +00:00
edouard
2426606a8b Remove example objects from GCS code and XML definitions, those are not useful anymore, the system is mature enough by now! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1906 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 21:51:58 +00:00
edouard
f9c41caaf3 OP-137 Bargraph dials now also support multivalued fields. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1904 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 21:34:25 +00:00
martin
b4befcee76 added default settings 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1902 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 17:02:58 +00:00
edouard
5a6795b6cb OP-137 Support field with multiple element for analog dial gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1901 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 15:52:46 +00:00
peabody124
ecf4e74a71 Ground/AHRSCalibration: Make mag's calibrate properly 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1900 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:44 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended 
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:40 +00:00
kokomojoe
86338404ed OP-185 Flight/GCS update the uavobjects.pro and uavobjectsinit.cpp with the firmware IAP objects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1897 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 05:33:05 +00:00
kokomojoe
3c352f1d1d OP-185 Flight/GCS - object to get firmware version and to switch into bootloader mode 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1894 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:27:57 +00:00
kokomojoe
b9fabbe9ce OP-185 Flight/GCS firmware IAP object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1893 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:13:33 +00:00
martin
5dae137af0 OpenPilot.wxs divided into parts 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1889 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 01:54:59 +00:00
martin
bec724a11d Added copying files to installer 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1888 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 00:07:31 +00:00
martin
0ed34d1399 added installer 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1887 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 00:05:57 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:51:33 +00:00
les
141f6e43fb UAVObectGenerator: Added support for multiple defaults 
Arrays can now have one default for all elements:
elements="4" defaultvalue="1"
or a default for each element:
elements="4" defaultvalue="1,2,3,4"


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1883 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 12:40:42 +00:00
martin
39b59e7452 added block copying qt_*.qm files 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1882 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 03:45:28 +00:00
dankers
d971746d26 Remove IT translation, two Italian speakers in the project have stated that the GCS will be in English and that this is common for computer programs in Italy. The chances of it being used as small and finding translators is even smaller. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1881 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 02:03:08 +00:00
martin
6206036226 Add: copying required QT DLLs (for installer) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1880 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 20:29:36 +00:00
martin
82b6b0f699 Add: copying required QT DLLs (for installer) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1879 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 20:20:22 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does 
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 19:48:09 +00:00
martin
037758c0ff Add: copying required for installer QT DLLs 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1877 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 19:06:48 +00:00
muralha
a915ff5ff7 Ground/ModelView: Center 3D models in the scene. 
When a new 3D model is load, it will be centered on the scene.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1875 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 11:56:50 +00:00
muralha
114956a514 Ground/ModelView: Added camera switching through keyboard (numbers: 1 to 0). 
Also, fixed wrong rotation of pitch and yaw.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1874 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 10:17:59 +00:00
muralha
abba162dca OP-149 Ground/ModelView: Cartesian coordinates system + Object rotation instead of camera rotation. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1873 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 09:53:31 +00:00
andrew
10a69a3c2c Added ccpm_setup.svp to config resource file 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1872 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 04:08:29 +00:00
peabody124
ffacbdcf1f Ground/UAVObjects: Remove attitudesettings from uavobject.pro file (looks 
sheepish)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1871 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 02:03:50 +00:00
peabody124
99f6500c9a Ground/UAVObjects: Forgot to delete vtolsettings. sorry. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1868 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 23:28:31 +00:00
zedamota
361f36da19 OP37/GCS MapLib - Small bug fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1867 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 23:11:17 +00:00
peabody124
07f8a227fa Ground/AHRSCalibration: Keep in sync with object changes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1866 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 22:08:34 +00:00
edouard
646b65564e Helicopters in the share directory. Plus the default bg. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1865 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:41:55 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:39:23 +00:00
edouard
11d197b3fc Added planes to the GCS distrubution dir. Renamed all texture.jpg to TEXTURE.JPG so that all platforms can see the textures (3DS files refer to TEXTURE and linux is case-sensitive) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1861 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:28:49 +00:00
edouard
068c6bfa93 Added multirotors to the GCS distribution directory. Fixed the 'textures.jpg' case so that the textures work on every platform. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1860 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:22:52 +00:00
edouard
3d8f11dc36 Remove old Easystar directory which is not used anymore in the share directory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1859 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 19:56:00 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings. 
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:27 +00:00
erhard
dd0d58f64f OP-99 GCS, Import/Export Plugin: Support for XML-File Format. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1852 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 16:13:28 +00:00
osnwt
9f34044d74 OP-175/Ground: Hopefully fixed some Modelview crashes on Windows due to VBO enabled by default in GLC_Lib. 
Added debug message displaying current VBO states (enabled, supported, used) - check with mouse right-click.
Please confirm that this does not break the plugin on other systems and that VBO can be enabled and really
is used by GLC_lib on supported systems. Also changed default 3ds model path.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1850 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 10:38:35 +00:00
peabody124
aa50cf836b Ground/UAVControl: Throttle rate of messages when using GCS controller. Still 
too high.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1848 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 04:34:09 +00:00
andrew
5c4331fe32 added ccpm swashplate image for config gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1845 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 03:55:41 +00:00
edouard
aa18cb4ce1 New indicator for GCS: "Arm Status". Use the bargraph dial plugin and connect it to the "ManualControlCommand/Armed" object/field. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1843 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 12:47:17 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the 
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:01 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to 
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:26 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication 
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:18 +00:00
peabody124
3854541798 Ground/UAVObjets: Add missing files for AHRSStatus2 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1833 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:28:16 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:28:14 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 17:31:13 +00:00
edouard
8161d25774 OP-138 Yaw mixing was inverted in the config gadget! This update works for me, with the quad layout in the gadget's picture. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1827 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:25:21 +00:00
edouard
b80d2ae4c5 OP-138 Support Max Accel in the matrix mixer from the config gadget. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1826 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 15:49:54 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an 
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 13:45:26 +00:00
peabody124
4766e11882 Ground/GCSControl: Reenable joystick. SDL required. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1822 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 13:45:24 +00:00
peabody124
93a85e24a0 Ground/Joystick/Magicwaypoint: Fix initialization condition that led to crash 
when closing gadget and also center icon on click in magic waypoint.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1821 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:36 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation 
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous 
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:29 +00:00
edouard
b5eb89ed5e OP-138 Added Reset button for curves, and display of value when moving a curve point. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1816 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 08:40:46 +00:00
edouard
b385ce961e OP-138 Modify Mixer curve to use values from 0 to 1 instead of -1 to +1, since the actuator module in OP works in the 0-1 range. Comments welcome on this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1815 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 07:28:12 +00:00
edouard
b32da232cb OP-138 Persistent (to SD) saves of all mixer settings working now (was missing two objects earlier). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1814 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 07:18:11 +00:00
martin
712725f3d3 Update Russian translation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1813 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 23:05:04 +00:00
cranphin
9c705aedf1 GCS: Removed last 'binary' config reading support, for layout/splitter settings. 
Again, use the previous version to convert old config files if needed :)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1812 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 20:55:15 +00:00
cranphin
b418fe18bf GCS: Control, Tiny fix to center the big red dots :) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1811 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 20:14:39 +00:00
dankers
05896ec335 Update Sounds for Notify Plugin, update CREDITS.txt 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1809 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 12:21:54 +00:00
peabody124
c69f884f01 Ground/AHRS Calibration: Make sure it returns updateRaw to false after running 
to stop from hammering telemetry and keep OP-AHRS smooth.  Also fixed bad
connection in magic waypoint.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1807 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 04:49:55 +00:00
peabody124
e2d63cbf19 Flight & Ground/AHRS Calibration: Made variance estimation into a two pass 
approach again because ran out of numerical precision for single pass.  Also
made ground force the gyro signs to be correct.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1806 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 04:30:29 +00:00
peabody124
4caab584f1 Ground/AHRS Calibration: Hard code the signs of teh sensor calibrations to be 
correct.  Six point calibration otherwise is sometimes inconsistent.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1805 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 01:20:34 +00:00
peabody124
25314ab92a Ground/UAVControl: Removed some debuggings and a qFatal in SDLGamepad for no 
joystick found.  Changed gadget name to Controller to remove redundant UAV.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1804 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 01:20:29 +00:00
peabody124
f2d5db60da Remove debugging messages 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1803 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-30 01:20:26 +00:00
edouard
742987a314 OP-138 Small bugfix to prevent a crash when actuator settings are incoherent 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1802 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 19:40:11 +00:00
peabody124
4e3325f3ba Ground/Libs: I'm an idiot, forgot to comment out sdllibrary itself 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1797 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 16:02:20 +00:00
peabody124
ce75434017 Ground/Plugins: Disable joystick control by default because of SDL dependency. 
People will need to install SDL :(.  Anyone know if we can make the joystick
aspect of this code separate and detect at build time if they have the
requirements?

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1796 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 13:15:48 +00:00
edouard
434a9499e2 OP-52 Hide Connect/Disconnect buttons in telemetry mode. Unhide in other modes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1795 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 12:12:46 +00:00
peabody124
c95b1e6117 Ground/UAVControl: Working joystick support although currently not configurable 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1794 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 03:59:03 +00:00
peabody124
7d6163c746 Ground/SDLGamepad: Import the library. This and the next commit introduce SDL 
as a dependency.  Please let me know if you have any problems.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1793 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 03:58:58 +00:00
edouard
a246c0f9ad OP-138 Corrected inconsistency with Quad-X read/write. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1792 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-28 19:44:55 +00:00
edouard
bd6754cd6b OP-138 Mixer: fixed wing works, and Quad-Plus and Quad-X configurations are supported. Not tested for obvious reasons, since I am working in the train. 
You can check how this works for you and report bugs. Layout works fine with screens as small as 800x600.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1791 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-28 18:27:34 +00:00
edouard
14af2b5726 OP-138 Small improvements and work on UI. Progressing slowly... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1787 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 20:38:39 +00:00
peabody124
e1e629d6fb Ground/Joystick Control: Separated the logic for changing values from the 
visualization to prepare for real joystick support.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1785 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 19:35:25 +00:00
sambas
21278e7a0e Ground/share: peabody was half sleep when making this, so here is the fix ;) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1783 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 15:47:10 +00:00
peabody124
c5863320fe Ground/AHRS Config: Made gyro bias computation happen on GCS during 6pt 
calibration

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1781 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:48:28 +00:00
peabody124
22db0d8785 Ground/Share: Sorry, writing it more elegantly. Tired. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1780 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:48:26 +00:00
peabody124
bdcca823fc Ground/Share: Ok, previous patch for this messed up on windows. I'm making 
Linux/Windows act like before but Linux people should check if they want the
mac version or not, I'd guess $(COPY_DIR) on mac more like osx.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1779 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:43:42 +00:00
peabody124
f74d64f0be Ground/Share: Remove the second $$dir to prevent copying the resource 
directories into the directories on a second build.  Also checking for
resources using the configured path instead of the hardcoded one.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1775 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:23 +00:00