rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
3,238 Commits 5 Branches 8 Tags 266 MiB
2301600f11
Commit Graph

267 Commits

Author SHA1 Message Date
Corvus Corax
192e31986d PIOS, Modules/FirmwareIAP: Use correct HAL for CPU serial 2011-04-23 18:30:32 +02:00
chebuzz
06443b4281 OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware. 
AHRS_comms still needs to be implemented.  INS/GPS functionality still needs to be implemented.  Double-check of the new drivers still needs to be done.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 12:46:39 +00:00
chebuzz
7fcde2f248 OP-377 PiOS/BMP085 Update BMP085 driver to be FreeRTOS agnostic 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3161 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 09:53:04 +00:00
sambas
3b9e762b69 OP-22 Flight/PiOS: Spektrum bugfix, for other than DX7 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3154 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-11 13:42:32 +00:00
sambas
dabc33c71c OP-22 Flight/PiOS: fix for 11ms framerate, Spektrum supervisor timer must have atleast one interrupt between frames 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3134 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 14:51:39 +00:00
sambas
cdfbf8614c OP-22 Flight/PiOS: Spektrum parser handles all known TXs, or atleast should. Test it well before sending aircraft to the sky. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3133 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-09 14:17:23 +00:00
FredericG
fc18f1cb36 OP-326 Long I2C messages starve the other drivers 
We where hammered on the head with interrupts that the driver does not need, not allowing the ISRs of other drivers to run 

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3018 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 17:12:18 +00:00
FredericG
4c51e80b5b OP-340 I2C NACK causes next transfers to fail. 
Needed to clear the NACK flag in the ISR, or the next transfers seem to get a nack too because the IRQ comes back

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3017 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 16:58:37 +00:00
FredericG
f6a2584f12 No code change; commented debug-code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3016 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-09 16:52:09 +00:00
sambas
b240915d05 PPM driver cleanup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3010 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:52:50 +00:00
sambas
0eeacb44bd PPM driver for OP, first test 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3007 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-08 18:08:13 +00:00
FredericG
6d0679b9e9 Small fix to PIOS_DEBUG_PinValue8Bit(), was also influencing other IO pins 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2975 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 12:53:52 +00:00
FredericG
35475820ad 2 new PIOS_DEBUG functions to output a value on the debug-pins. In its current implementation it will probably not work on CC.... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2971 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-05 09:23:57 +00:00
peabody124
ec29920a8d OP-315: Clean up RTC calls into a separate function. Unfortunately still need 
to add function headers into portmacro.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2942 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:38 +00:00
peabody124
3e2c542eef OP-315 Use RTC at 65 khz as time base for task switching 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2941 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:34 +00:00
peabody124
267efe0b88 OP-315: Patch to FreeRTOS port to allow querying the run time for tasks. This 
will need to be forward ported (and ideally pushed up stream) for FreeRTOS
updates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2939 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-03 04:28:22 +00:00
sambas
d9ad0e9a8f OP-22 Flight/PiOS: Spektrum hacks, doubled supervisor timer and ?loss? counter to the channel8 value 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2907 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-27 19:03:58 +00:00
sambas
8d6f320fca Handle I2C defines better, needed in CC for now 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2815 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-20 07:14:02 +00:00
sambas
f3bce1705b OP-22 Flight/PiOS: Spektrum fix, OP tested on ground not flown yet, CC not tested. 
pios_rcinput.[ch] outdated

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2775 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-13 13:10:02 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-12 22:19:43 +00:00
peabody124
9ed0882df9 PiOS/USART: Apply same fix as Spektrum to force read of DR whenever there is an 
error flag set

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2760 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:52 +00:00
peabody124
7e78e8af04 CC-21 PiOS/Spektrum: Prevent condition that can tie up USART interrupt and locks up 
CC.  Must always read the DR to clear the error flags.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2759 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-08 16:34:49 +00:00
peabody124
fedadb1275 CC-8: Move the queue registration into the ADC PIOS driver to allow other 
functions to use it easily

Conflicts:

	flight/Modules/Attitude/attitude.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2707 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-03 02:42:43 +00:00
peabody124
c9207b3754 CC-14 PIOS/Servo: Set more than two bank speeds 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2658 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-02-01 02:17:55 +00:00
stac
880a68a788 uavobj: Convert bootloader-compatible builds to autogen init 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2633 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-31 00:57:24 +00:00
stac
b5426e09d0 uavobj: Convert CC over to use autogenerated uavobjinit 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2631 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-30 22:46:51 +00:00
stac
083e2b01a9 uavobject: Use linker to produce uavobj initcalls 
The UAVObject initcall list is now automatically
generated at link time based on the exact set of
UAVObjects linked into the firmware image.

This will allow any subset of UAVObjects to be
used in any firmware image.

The uavobj_initcall() macro automatically adds the
marked function's address into the .initcalluavobj.init
ELF section.

The UAVObjectsInitializeAll() function now simply
iterates over the functions listed in the
.initcalluavobj.init section and calls them.

You can see the contents of this section in the ELF file
like this:
  ./tools/arm-2009q3/bin/arm-none-eabi-objdump \
      --syms -j .initcalluavobj.init \
      ./build/openpilot/OpenPilot.elf

This is fundamentally the same mechanism that the Linux
kernel uses to initialize the specific set of components
that the user has selected in their kernel configuration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2630 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-30 22:46:48 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-28 09:25:30 +00:00
edouard
df0b5f9b6c CC-13 CopterControl bootloader first pass. Does not talk on USB for some reason, but starts. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2601 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-27 22:33:13 +00:00
peabody124
00a3e82c70 CC-6 PIOS/SPI: Add semaphore to SPI device structure that can be used to ensure 
only one CS line is asserted.  No checks are enforced on this by the SPI code
as I cant see a clean way of it being aware of the CS lines.  We could add
another CS mode those which is driver managed per transfer and has a GPIO i
line for each device.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2579 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:52:17 +00:00
peabody124
2881370eab OP-291 PIOS/Servo: Refer to channels by TIM_Channel_x to be consistent with PWM 
system

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2571 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:54 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:48 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure. 
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:45 +00:00
peabody124
01b09668aa OP-291 PIOS/Servo: Dont need to power up GPIOA/GPIOB in servo since done in sys 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2567 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:41 +00:00
peabody124
607cdcac21 Upgrade FreeRTOS to the latest version (6.1.1) which allows compiling with -Os 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2562 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-24 07:51:26 +00:00
FredericG
70f11543e0 Fixed debugging via Servo PWM pins 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2544 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-23 18:11:47 +00:00
peabody124
65e02eeb25 OP-293 PIOS/ADC: Fixed issue with DMA engine and odd numbers of channels not 
accounting for the fact they are transferred in pairs when using ADC2

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2510 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 17:18:20 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-21 03:40:21 +00:00
peabody124
21b4e55029 OP-14 OP-16: I2C Improvements 
1) Added nack counter monitoring
2) Made timeout for getting semaphore in I2C user space code use the one from
driver and record timeouts.  This does not influence timeouts in the non
FreeRTOS case
3) Remove case block from the error handler so that all bus errors reset the
i2c interface

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2469 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:12 +00:00
peabody124
0e441a20f3 OP-14 OP-16 I2C: When sending STOP signal after NAK, mask interrupts first 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2468 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:08 +00:00
peabody124
0d567f4e4b OP-14 I2C: Don't log a NAK as an error and also after NAKs seem to get an event 
from the stop bit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2466 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:11:02 +00:00
peabody124
31919241b8 OP-14 I2C: Adding new event to the ignore list 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2465 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:10:59 +00:00
peabody124
68536d2fd1 OP-14 I2C: Throw away 0 event in error handler 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2464 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-17 02:10:56 +00:00
peabody124
c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all 
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 23:00:48 +00:00
peabody124
04a00c7327 OP-269 PIOS/ADC: Change the initialization code to work well when changing 
oversampling

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2452 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 16:02:53 +00:00
peabody124
ad7a6e6071 OP-269 PIOS/ADC: Only enable the half and full conversion flag for the double 
buffering

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2451 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 16:02:50 +00:00
peabody124
0259b6d1f1 OP-269 PIOS/ADC: First part of conversion to driver structures 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2444 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:39 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-16 02:45:22 +00:00