Laurent Lalanne
15c2e619e5
LP-577 Ignore disabling GPS module for boards where the module is already built in.
2018-02-11 21:29:33 +01:00
Laurent Lalanne
773bc084e5
LP-574 Use loop for ADCRouting
2018-02-06 11:41:30 +01:00
Laurent Lalanne
498aba5c19
LP-514 Add DShot150/600/1200 and OneShot42/MultiShot Esc support to Wizard
2018-01-30 19:16:01 +01:00
Laurent Lalanne
9a4fd5aab5
LP-514 Add new Esc icons for Wizard
2018-01-30 19:15:41 +01:00
Laurent Lalanne
bdf66cafd7
LP-574 Check if adc inputs are configured before displaying battery data on PFD
2018-01-27 12:27:11 +01:00
Laurent Lalanne
7cfa98994e
LP-551 Remove popup - Increase neutral diff levels for alarm
2018-01-26 20:13:00 +01:00
Laurent Lalanne
a053c015cf
LP-551 Changes from review, change names and fix typos.
2018-01-26 20:13:00 +01:00
Laurent Lalanne
5ecf3f22eb
LP-551 Switch - break cleanup
2018-01-26 20:13:00 +01:00
Laurent Lalanne
9787bee599
LP-551 Update input page if user disconnect board while calibrating and TxWizard
2018-01-26 20:13:00 +01:00
Laurent Lalanne
c671327c0d
LP-551 Update status when user disconnect board while testing outputs
2018-01-26 20:12:59 +01:00
Laurent Lalanne
e5c574b20e
LP-551 Add extra safety while testing outputs - Prevent input calibration start
2018-01-26 20:12:59 +01:00
Laurent Lalanne
42332c6913
LP-551 Add enableBanks function - Refine bank freeze/unfreeze - Remove unused bankModeName()
2018-01-26 20:12:59 +01:00
Laurent Lalanne
b5bce33ce2
LP-551 Disable Bank manipulation while testing output or calibrating inputs
2018-01-26 20:12:59 +01:00
Laurent Lalanne
f93ebd4891
LP-551 Really disable all UI in Output tab while calibrating inputs
2018-01-26 20:12:59 +01:00
Laurent Lalanne
5f72771b3c
LP-551 Output tab: Allow min=max=neutral values, used with resetActuators() in input calibration.
2018-01-26 20:12:59 +01:00
Laurent Lalanne
e281a032a1
LP-551 Add signal/slot logic between Input and Output tab - Prevent actuator manipulation with Output warning and freeze Output tab while calibrating
2018-01-26 20:12:59 +01:00
Laurent Lalanne
2a7e89b701
LP-551 Rename getNeutralValue() to neutralValue()
2018-01-26 20:12:58 +01:00
Laurent Lalanne
b68c130bc4
LP-551 setLimits() only set limits - Added checkChannelConfig() and checkOutputConfig() functions.
2018-01-26 20:12:58 +01:00
Laurent Lalanne
e69a7ad238
LP-551 Remove BankMode string and use UavObject definitions
2018-01-26 20:12:58 +01:00
Laurent Lalanne
893264273f
LP-551 Add warning for neutral setting with reversable motors
2018-01-26 20:12:58 +01:00
Laurent Lalanne
b508e07845
LP-551 Set default values in Output tab when user changes BankMode - Add warning for Bankmode mismatch (servo/motor)
2018-01-26 20:12:58 +01:00
Philippe Renon
4c9c3c202c
Merged in filnet/librepilot/LP-565_make_pfd_saved_model_file_relative_to_gcs_data_dir (pull request #483 )
...
LP-565 make pfd saved model file relative to gcs data dir
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
2018-01-24 20:40:13 +00:00
Philippe Renon
0f186cad43
Merged in filnet/librepilot/LP-561_fix_gcs_gadget_clone (pull request #482 )
...
LP-561 fix gcs gadget clone
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
2018-01-24 20:14:38 +00:00
Philippe Renon
fcf25d1e5d
Merged in filnet/librepilot/misc_fixes (pull request #484 )
...
Misc fixes
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Paul Jewell <paul@teulu.org>
2018-01-24 20:13:30 +00:00
Lalanne Laurent
371760d938
Merged in f5soh/librepilot/LP-559_Artwork_for_boards (pull request #477 )
...
LP-559 Artwork for boards
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
2018-01-24 20:04:36 +00:00
Philippe Renon
1a3fb1f682
gcscontrol: remove cruft
2017-12-10 19:43:21 +01:00
Philippe Renon
bbf2b38232
gcs utils: remove cruft
2017-12-10 16:22:59 +01:00
Philippe Renon
ce27a0b035
LP-109 fix copy/paste errors in gstreamer pipelines
2017-12-10 16:22:58 +01:00
Philippe Renon
cf74719278
LP-565 pfd gadget: simplify insert/removeDataPath related code
2017-12-10 16:21:37 +01:00
Philippe Renon
01c87ce56b
LP-565 pfd gadget: make saved model file path relative to GCS data path
2017-12-10 16:21:36 +01:00
Philippe Renon
95a2d2867c
LP-561 scope gadget: fix regression that prevented cloning of curves
2017-12-10 16:19:49 +01:00
Philippe Renon
ab005828a1
LP-561 pfd gadget: fix regression that prevented cloning of units
2017-12-10 16:19:48 +01:00
Laurent Lalanne
684410d23c
LP-48 Update French translation
2017-11-28 23:49:56 +01:00
Laurent Lalanne
7c40611ed4
LP-48 Typos fixes related to translation
2017-11-28 23:34:05 +01:00
Laurent Lalanne
0ab5e46f12
LP-559 Reduce left margin and total width in commonHwSettingsWidget
2017-11-27 21:46:54 +01:00
Laurent Lalanne
2ed165b5e9
LP-559 Update tinyFish HW page with vector picture
2017-11-27 21:45:22 +01:00
Laurent Lalanne
740e9fa86f
LP-559 Update SPRacingF3evo HW page with vector picture
2017-11-27 21:44:33 +01:00
Laurent Lalanne
fc77ba2d4a
LP-559 Update PikoBLX HW page with vector picture
2017-11-27 21:43:42 +01:00
Laurent Lalanne
18b70445c2
LP-559 Update Controller page - SetupWizard with vector pics
2017-11-27 11:52:10 +01:00
Laurent Lalanne
d39fcc1a70
LP-559 Update RevoNano HW tab with vector picture
2017-11-27 11:51:27 +01:00
Laurent Lalanne
f486725f70
LP-559 Update Sparky2 HW tab with vector picture
2017-11-27 11:50:36 +01:00
Laurent Lalanne
acfa6cc197
LP-559 Update Revo HW tab with vector picture
2017-11-27 11:49:00 +01:00
Laurent Lalanne
ff3a1bd630
LP-559 Update CC HW page for vector pictures
2017-11-27 11:45:30 +01:00
Laurent Lalanne
6cd8a85bbd
LP-559 Update ressource file
2017-11-27 11:44:43 +01:00
Laurent Lalanne
8cbdba97e6
LP-559 Add artwork for Omnibus boards
2017-11-27 11:44:43 +01:00
Laurent Lalanne
888e9e35af
LP-559 Add artwork for current boards
2017-11-27 11:44:43 +01:00
Vladimir Zidar
213893e298
Merged in mindnever/librepilot/LP-525-GCS_Hardware_pages_for_F3_boards (pull request #455 )
...
Add GCS Hardware pages for F3 boards
Approved-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
2017-11-27 10:39:13 +00:00
Laurent Lalanne
544254ea0e
LP-315 Fix False/True enums
2017-10-30 23:17:44 +01:00
Laurent Lalanne
88f1a490a2
LP-315 Rise RXS255 template
2017-10-30 23:17:44 +01:00
Laurent Lalanne
d1e8b1f0a8
LP-315 Rise RXC270 template
2017-10-30 23:17:44 +01:00
Laurent Lalanne
181e5d7e37
LP-315 FeilLun-FX127 template
2017-10-30 23:17:43 +01:00
Philippe Renon
5153764fe4
LP-558 change TRUE/FALSE to True/False in all vehicle templates
2017-10-30 23:15:29 +01:00
Philippe Renon
f920e837c4
LP-558 accept case insensitive uav enum values
...
this is needed because TRUE/FALSE enum has been changed to True/False
but old TRUE/FALSE is used by templates
LP templates can be fixed but users' templates can't
logic is now to try case sensitive, if that fails try case insensitive
if case insensitive works, a warning is logged
a new warning is also logged if the enum can't be found at all
2017-10-30 23:14:19 +01:00
Vladimir Zidar
8b61e7b27f
LP-525 Fixed USB function handling - not allowing USBTelemetry on both, but requiring at least one. Adjusted common option combobox sizes.
2017-10-26 01:35:54 +02:00
Vladimir Zidar
4bd3df43aa
LP-525 Uncrustify
2017-10-23 23:04:59 +02:00
Vladimir Zidar
f5c10ca611
LP-525 [GCS] [SPRACINGF3EVO] Changed UART3 & UART1 title to "headers" instead of "pads" to match the user manual.
2017-10-23 23:04:59 +02:00
Vladimir Zidar
ed8c33fc28
LP-525 Fixed DSMxBind combo options.
2017-10-23 23:04:59 +02:00
Vladimir Zidar
1b0ceaeed7
LP-525 [PikoBLX] Cleaned up HW configuration, added PPM Port (pad) combo. Verified GCS HW page.
2017-10-23 23:04:58 +02:00
Vladimir Zidar
4f22425cc2
LP-525 More work on hw pages. Added PikoBLX.
2017-10-23 23:04:11 +02:00
Vladimir Zidar
4df72a2f5f
LP-525 Added tinyFISH GCS HW page
2017-10-23 23:01:50 +02:00
Vladimir Zidar
657499c0d6
LP-525 Added GCS HW page for SPRacing F3 EVO
2017-10-23 23:01:49 +02:00
Philippe Renon
5a84f2ce86
osx: fix compilation error due to typo
2017-10-14 16:15:48 +02:00
Philippe Renon
2e47c983d4
LP-109 video gadget: fix plain wrong instructions in readme.txt
2017-09-18 22:58:42 +02:00
Philippe Renon
c6fbc5f87c
LP-109 add linux and macos GCS defaults
...
these defaults add gadget configuration for PFD video and video gadgets
2017-09-13 21:29:57 +02:00
Philippe Renon
1e4c9d4009
LP-109 extract Windows specific gadget configurations to defaults_windows.xml
2017-09-12 22:21:19 +02:00
Philippe Renon
f78d161dc3
LP-109 fix crash when using PFD Video without gstreamer support
2017-09-12 22:21:17 +02:00
Philippe Renon
ddbabc4bf0
LP-109 use standard way to enable gstreamer support
2017-09-12 22:21:15 +02:00
Philippe Renon
dffc4de6db
LP-109 video gadget: add gstreamer opengl plugin
2017-09-12 22:21:12 +02:00
Philippe Renon
d78472b59c
LP-109 video: cleanup camera calibration plugin
2017-09-12 22:21:10 +02:00
Philippe Renon
ba29f527fa
LP-109 pluginerrorview: add missing breaks
2017-09-12 22:21:08 +02:00
Philippe Renon
7cdc38eb58
LP-109 video : increase osxvideosink rank
...
so autovideosink selects it
2017-09-12 22:21:05 +02:00
Philippe Renon
05112f9c1b
LP-360 add video background to PFD
2017-09-12 22:21:01 +02:00
Philippe Renon
e30340237f
LP-109 video gadget: add Mac support
...
credits go to Ben Meng for making the video gadget work on Mac
2017-09-12 22:20:58 +02:00
Philippe Renon
6929e3407b
LP-109 cleanup copydata.pro files
...
to bring them up to par with gstreamer's copydata.pro file
2017-09-12 22:20:56 +02:00
Philippe Renon
8f17f14400
LP-109 about credits: fix URLs of Qt and msys2
2017-09-12 22:20:54 +02:00
Philippe Renon
f8327c2d90
LP-109 video gadget: add gstreamer to About credits
2017-09-12 22:20:51 +02:00
Philippe Renon
47354f3b9a
LP-109 fix long video pauses with rtsp protocol over wifi
...
workaround https://bugreports.qt.io/browse/QTBUG-40332
2017-09-12 22:20:49 +02:00
Philippe Renon
892c83b30e
LP-109 add gstreamer library and video gadget
2017-09-12 22:20:46 +02:00
Philippe Renon
e3a658d153
Merged in filnet/librepilot/LP-419_avoid_gcs_config_reset (pull request #457 )
...
LP-419 avoid gcs config reset
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Jan NIJS <dr.oblivium@gmail.com>
Approved-by: Brian Webb <webbbn@gmail.com>
2017-09-11 20:56:23 +00:00
Lalanne Laurent
a21d5ba603
Merged in f5soh/librepilot/LP-487_Wrong_defaults_Dterm_basic (pull request #452 )
...
LP-487 Allow the Default button group #1 (PID rate-basic) also reset the RPY Dterm (in advanced tab) to defaults.
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Jan NIJS <dr.oblivium@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-09-11 19:42:58 +00:00
Philippe Renon
d4db79e06f
LP-419 config: fix an unused arg warning
2017-08-28 21:49:09 +02:00
Philippe Renon
ffc48dab65
LP-419 config: improve const correcteness of saveState() methods
2017-08-28 21:48:38 +02:00
Laurent Lalanne
8da8172999
LP-399 Fix tooltips
2017-07-19 14:15:18 +02:00
Philippe Renon
548a881003
LP-419 removed unused code
2017-07-18 22:54:14 +02:00
Philippe Renon
47d9219a09
LP-419 add handling of os specific default GCS configuration file
...
if a os specific file (for example default_linux.xml) is found it will be loaded
alongside the common default.xml file.
no os specific dfault files are provided yet...
2017-07-17 22:54:47 +02:00
Philippe Renon
f00e40da4f
LP-419 config: merge factory defaults at startup
...
a simple registry is used to track all configurations ever seen
only new configurations (i.e. not in the registry) are added
merging only applies to plugin and gadget configurations for now
2017-07-17 22:22:45 +02:00
Philippe Renon
b52424b2cd
LP-419 dialgadget: convert floats to strings before saving configuration
...
avoids rounding issues
2017-07-17 22:22:43 +02:00
Philippe Renon
f7e0553ea9
LP-419 notification: remove unused files
2017-07-17 22:22:41 +02:00
Philippe Renon
9f3aae1f09
LP-419 config: made SerialPlugin a configurable plugin
...
inspired from notification plugin
2017-07-17 22:22:39 +02:00
Philippe Renon
2c14920ab0
LP-419 config: apply camel case to IPConnection classes
2017-07-17 22:22:33 +02:00
Philippe Renon
bba67f27d6
LP-419 config: made IPConnectionPlugin a configurable plugin
...
inspired from notification plugin
next is the serialconnection plugin
also made the code more conformant
2017-07-17 22:20:57 +02:00
Philippe Renon
068988741d
LP-419 cleanup QSettings usage throughout GCS
2017-07-17 22:14:08 +02:00
Philippe Renon
7113c1a624
LP-419 main: use new settings utils
2017-07-17 22:14:06 +02:00
Philippe Renon
42a95e5791
LP-419 add settings utilities
...
provides utilities to initialize, load and merge factory defaults settings
2017-07-17 22:14:04 +02:00
Philippe Renon
38005e3881
LP-419 xmlconfig: cleanup and remove dead code
2017-07-17 22:14:02 +02:00
Laurent Lalanne
c9903f9bbc
LP-399 Use checkboxes for status and settingsComplete - Tooltip changes
2017-07-10 13:01:04 +02:00
Laurent Lalanne
bbaa1b32d9
LP-399 Rearrange code to be more readable - Spelling
2017-07-05 23:31:59 +02:00
Laurent Lalanne
cc6dac9259
LP-399 Save HWSettings first
2017-07-05 23:31:59 +02:00
Laurent Lalanne
3bb2bd0b88
LP-399 Add groupbox for module Status
2017-07-05 23:31:59 +02:00
Laurent Lalanne
1b25dcc022
LP-399 Add more tuning information + reset button - Give feedback about
...
the module running or not.
2017-07-05 23:31:59 +02:00
Laurent Lalanne
c9570ba3a7
LP-399 Move AutoTune tab close to Stabilization
2017-07-05 23:31:59 +02:00
Laurent Lalanne
02e157390d
LP-399 Better resizing
2017-07-05 23:31:58 +02:00
Laurent Lalanne
68597d51cc
LP-399 Add GUI to Autotune module
2017-07-05 23:31:58 +02:00
Jan NIJS
56661850ab
Merged in Oblivium/librepilot/LP-536_GNSS_improvements (pull request #444 )
...
LP-536 GNSS improvements
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Jan NIJS <dr.oblivium@gmail.com>
2017-07-05 19:33:11 +00:00
Philippe Renon
9efdb6b1fe
Merged in filnet/librepilot/LP-530_upgrate_to_eigen_3_3_3 (pull request #436 )
...
LP-530 upgrate to eigen 3 3 3
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Brian Webb <webbbn@gmail.com>
2017-07-05 19:31:11 +00:00
Jan NIJS
c1aeb9f0c1
LP-536 update comments
2017-07-02 22:37:03 +02:00
Jan NIJS
cb8dd90ad7
LP-536 Fixes (hopefully) for PRN text scaling issue Laurent saw on his PC.
...
- I resolve the PRN text scaling issue by comparing the scaled text height with the available space.
If there is not enough space available, the scaling factor is updated so the final scale factor fills the available space as much as possible.
If the height limit has been reached, the corrected scaling is applied to both the PRN and the SNR text to keep both about the same size.
- This scaling works fine on my Windows PC. I therefore removed the maximum width limit for the snrwidget. (was 850px)
The snr widget will now take up all available width. This does not mean that individual bars will be scaled to fit the width of the widget.
However I have implemented a two step scaling for that. If there are less than 16 visible satellites, the width of each bar is calculated
based on a total of 16 bars in the view. Just like before my changes. If there are more than 16 satellites visible, the number of bars displayed
is incremented from 16 to 24. An aging based hysteresis has been added to prevent continuous flapping between both states.
I think this solution is aesthetically more pleasing than scaling the width of the bars to the width of the widget.
Especially for low number of satellites. (This solution would show massive bars if only a few satellites are visible)
- Since there was no copyright header in gpssnrwidget.cpp and gpssnrwidget.h, I have added one. The OP line is based on the last changes seen in the OP repo.
2017-07-02 21:29:29 +02:00
Laurent Lalanne
525875f6ff
LP-487 Allow the Default button group #1 (PID rate-basic) also reset the RPY Dterm (in advanced tab) to defaults.
2017-07-02 17:29:34 +02:00
Jan NIJS
c0964cfdce
LP-536 Changes based on feedback to the PR:
...
- more professional looking toggle code.
- change PRN font to Digital-7
- updated font size factor for SNR PRN text from .56 to .68
- moved a few class includes from the .h to the .cpp file & forward declared QGraphicsSvgItem class in flatearthwidget.h
- hide marker before resize, display it again after resize.
- corrected issue where marker was crawling to the south on continuous resizes.
Instead of nudging the marker, added a proper forceUpdate parameter to the setPosition() function.
- made sure that only one @author tag is present.
- centered both flatEarth and constellation widgets in their boxes.
- lowered resolution of the map image 1440 -> 1080 & used JPG instead of PNG. Size went from 1105KB on disk to 155KB on disk (PNG version for this resolution is 634KB).
The resolution change has a minor impact on the level of detail seen in the zoomed view.
- added margin for the SNR widget. Although I start to think the SNR widget isn't all that interesting. Removal may be an option.
- Also removed gridLayout_2 from the top left, leftover from a test.
- Delete scene in the widget destructor. I saw this was done in constellation widget, therefore did the same.
I used NULL instead of 0. Looks more correct for pointers to me.
What I didn't implement:
- wider bars in the SNR widget when less than the max number of satellites are shown.
Currently the total width of the SNR widget is limited to 850px. If we go wider with the current implementation, the text becomes too large.
At this time, I don't have a good idea how to handle that.
2017-06-29 00:12:46 +02:00
Philippe Renon
4d73190806
LP-530 GCS: make it possible to switch to msys2 provided eigen lib
2017-06-28 10:05:46 +02:00
Philippe Renon
bac194595d
LP-530 GCS config plugin: don't suppress compilation warnings
...
this requires fixing a minor warning in configvehicletypewidget.cpp
2017-06-28 10:05:45 +02:00
Philippe Renon
f0f89fe2ad
LP-530 upgrade to eigen 3.3.3
...
fixes compilation warnings
2017-06-28 10:05:42 +02:00
Jan NIJS
557e728a00
LP-536 auto-scaling world map as requested by Philippe + lay-out modifications
...
Includes a nice feature which you will notice if you keep an eye on your cursor ;-)
2017-06-28 03:06:33 +02:00
Jan NIJS
9d6175e68e
LP-536 Missed a few 3D conditions in uav.js
2017-06-28 03:06:33 +02:00
Jan NIJS
2d181994f0
LP-536 use the correct spelling for SATELLITES
2017-06-28 03:06:31 +02:00
Jan NIJS
6cf16cc727
LP-536 Second part of visual improvements for the GPS widget
...
- Improve Alt label in the GPS display widget. The displayed altitude is Above Mean Sea Level (AMSL).
AMSL label has been added to clarify the reference from which this altitude is measured.
- Make values bold to draw more attention to them. The labels are less important.
- Replaced an empty horizontal layout by a vertical spacer
2017-06-28 03:06:31 +02:00
Jan NIJS
1876d44c2e
LP-536 adapt SNR widget tooltip to the new location of the PRN number (under the bar instead of in the bar)
2017-06-28 03:06:31 +02:00
Jan NIJS
6f3fefd650
LP-536 add extra DGNSS state to indicate when SBAS information (any differential information in fact) is used for higher accuracy.
2017-06-28 03:06:30 +02:00
Jan NIJS
b5a42dc489
LP-536 Reorganize GPS display widget for a wider SNR widget.
2017-06-28 03:06:30 +02:00
Jan NIJS
507ec08db8
LP-536 UTC is the more correct label for GNSS time + fix for the jumping number of satellites in gps widget.
...
The number of satellites was jumping around the screen. This was due to an unnecessary resize being called.
2017-06-28 03:06:29 +02:00
Jan NIJS
93bf673f54
LP-536 brighten the Galileo satellite icons a bit for better readability of the SV number
2017-06-28 03:06:29 +02:00
Jan NIJS
4ca27d2413
LP-536 Display information for up to 24 satellites instead of only 16.
...
Information for 24 satellites is fine when using 3 constellations. I think displaying more is overkill.
2017-06-28 03:06:29 +02:00
Lalanne Laurent
726c882aab
Merged in f5soh/librepilot/LP-520_OPlink_RSSI_PPMoutput (pull request #428 )
...
LP-520 OPlink RSSI PPMoutput
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
2017-06-26 19:16:28 +00:00
Philippe Renon
985beadd9b
Merged in filnet/librepilot/LP-535_msys2_automatic_dependencies (pull request #443 )
...
LP-535 msys2 automatic dependencies
Approved-by: Jan NIJS <dr.oblivium@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Lalanne Laurent <f5soh@free.fr>
2017-06-26 18:46:15 +00:00
Philippe Renon
cf1b716c9d
Merged in filnet/librepilot/LP-496_reverted_bank_copy (pull request #442 )
...
LP-496 config stabilization: copy banks from/to were reversed
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Jan NIJS <dr.oblivium@gmail.com>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-06-26 18:38:59 +00:00
Philippe Renon
bdd95f95f3
LP-535 msys2: use new addCopyDependenciesTarget to automatically find and copy library dependencies
2017-06-26 09:14:33 +02:00
Philippe Renon
5e6b0e83b3
LP-535 cosmetic renaming in addCopyFileTarget and addCopyDirTarget
2017-06-26 09:14:31 +02:00
Philippe Renon
53cf78e63f
LP-535 msys2: add python utility to find and copy library dependencies
...
also add a new qmake addCopyDependenciesTarget function to invoke new utility
2017-06-26 09:14:30 +02:00
Philippe Renon
ded673442c
LP-496 config stabilization: copy banks from/to were reversed
2017-06-22 13:42:22 +02:00
Laurent Lalanne
34d27dc854
LP-520 Change checkbox name
2017-06-18 23:41:24 +02:00
Laurent Lalanne
86a8eded51
LP-520 Update UI using checkbox for Rssi PPM output
2017-06-18 23:41:23 +02:00
Laurent Lalanne
673dbeee40
LP-520 Oplink : Add PPM Rssi option to Gui - Allow only one PPM port
2017-06-18 23:41:23 +02:00
Fredrik Arvidsson
bd555623dd
LP-531 Adds support for Qt 5.9.0
...
SDK install script and Qt installer script updated with new version, paths and URL:s
Explicit casts to char added to avoid clang compiler warnings (treated like errors) on MacOSX and XCode 8.3.2
2017-06-14 00:18:33 +02:00
Vladimir Zidar
ff9b1fdd0a
Merged in mindnever/librepilot/LP-522_GCS_Fix_DFUObject_stack_overflow_on_macOS (pull request #431 )
...
LP-522 GCS: DFUObject::CRCFromQBArray - allocate temp buffer on heap
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: David Wilson <dgwilson65@gmail.com>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-06-13 19:56:52 +00:00
Vladimir Zidar
9f12a27f53
LP-523 Move object id and instance_size members from UAVOData structure into UAVObjType and keep only pointer to it. UAVObjType contains init_callback too to allow resetting data to default values.
2017-06-07 00:47:47 +02:00
Vladimir Zidar
e44114d794
LP-512 Uncrustify
2017-06-02 11:46:39 +02:00
Vladimir Zidar
5194f79784
LP-522 GCS: DFUObject::CRCFromQBArray - allocate temp buffer on heap
2017-06-01 14:07:23 +02:00
Vladimir Zidar
48ebb8359e
LP-512 GCS: Added missing board images
2017-05-30 23:22:44 +02:00
Vladimir Zidar
4eeb983f2d
LP-512 Addressed remainging PR comments.
2017-05-30 16:31:39 +02:00
Vladimir Zidar
916188dd11
LP-512 Added support for tinyFISH FC
2017-05-29 21:12:28 +02:00
Vladimir Zidar
b523f69f0e
LP-512 Addressed most of the PR comments.
2017-05-26 01:06:31 +02:00
Vladimir Zidar
77918c51a1
LP-512 Uncrustify
2017-05-25 22:08:39 +02:00
Vladimir Zidar
faf0ae7c04
LP-512 PikoBLX board added
2017-05-25 22:08:38 +02:00
Vladimir Zidar
fdf7e8858a
LP-512 Added F3 boards to uploader widget
2017-05-25 22:08:34 +02:00
Vladimir Zidar
5435dbd464
LP-512 Initial F3 support
2017-05-25 22:08:16 +02:00
Philippe Renon
239aad83ba
Merged in filnet/librepilot/LP-517_uavtalk_logging_qt5_8_0 (pull request #423 )
...
LP-517 uavtalk logging qt5 8 0
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
2017-05-15 20:19:16 +00:00
Philippe Renon
03ec59b6a6
Merged in filnet/librepilot/LP-513_gcs_remove_unused_code (pull request #417 )
...
LP-513 gcs remove unused code
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-05-15 19:49:35 +00:00
Laurent Lalanne
0f8f560b36
LP-505 Oplm Gui: Add missing image
2017-05-15 21:31:53 +02:00
Lalanne Laurent
6875c664f7
Merged in f5soh/librepilot/LP-505_OPLM_Gui (pull request #420 )
...
LP-505 OPLM Gui
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-05-15 18:59:29 +00:00
Lalanne Laurent
9f0d7ea4aa
Merged in f5soh/librepilot/LP-510_Update_oplm_panel (pull request #416 )
...
LP-510 Fix OPLM panel display and SMeter
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-05-15 18:58:45 +00:00
