Brian Webb
be444db7f8
Added PPM output to OPLink firmware
2013-01-04 06:51:27 -07:00
Brian Webb
7f6a718354
RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals).
2012-12-11 17:44:19 -07:00
Brian Webb
bd42083376
RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device.
2012-12-11 17:43:55 -07:00
James Cotton
5eed0db61b
Hardcode rates to 64kbps
2012-10-03 15:10:12 -05:00
James Cotton
0c8c148b51
PipX HW Def: Use PIOS_BOARD_HW_DEFS_GetRfm22Cfg since the radio module initializes the modem
...
and doesn't know teh difference between RM2 and PipX
2012-10-02 10:07:50 -05:00
James Cotton
68fa464ccf
RM: Make the direction of the TX/RX lines come from the configuration file
2012-09-04 23:22:56 -05:00
James Cotton
b1bd6d8583
PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration.
2012-08-26 00:00:39 -05:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
Stacey Sheldon
decd92f21d
pipx bu: apply recent LED changes so BU image builds again
2012-05-27 21:37:59 -04:00
Brian Webb
6e359c5933
Added PipX to Windows .inf file and updated ppm port definitions.
2012-05-21 19:22:46 -07:00
Brian Webb
e57543ec29
Updated USB on PipX to latest CDC changes.
2012-05-20 19:34:43 -07:00
Brian Webb
2f1a9e3e7d
Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout.
2012-05-20 18:30:37 -07:00
Brian Webb
93ec7c11a6
Fixed race condition on getting packets.
2012-05-15 19:38:14 -07:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
352471857f
Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread.
2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b
Fixed failed merge with next.
2012-05-06 12:38:13 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
Brian Webb
30d63b5b12
Merged USB CDC updates.
2012-05-02 06:45:24 -07:00
Brian Webb
290acf0398
Fixed watchdog timeouts.
2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37
Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling.
2012-05-01 19:14:58 -07:00
Brian Webb
25ffb99cee
Added initialization of flash eeprom for saving settings to PipX.
2012-04-28 19:29:56 -07:00
Brian Webb
f726cc6a9d
Added a RTC supervisor timer to RFM22B driver.
2012-04-21 18:31:49 -07:00
Brian Webb
62c5036220
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
2012-04-17 17:36:05 -07:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
Brian Webb
e639d173a0
Create ID from a hashed CPU serial number.
2012-04-07 19:41:23 -07:00
Brian Webb
0f9f897870
Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream.
2012-04-07 18:17:32 -07:00
Brian Webb
56a2006fd8
Reconfigured to run on the real PipX board.
2012-04-06 18:44:31 -07:00
Brian Webb
fff93910e2
RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module.
2012-04-05 20:24:50 -07:00
Brian Webb
ecdf150946
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
2012-03-18 10:22:05 -07:00
Brian Webb
41c68a6f6b
Updates to PipX configration.
2012-03-15 19:51:46 -07:00
Brian Webb
483a96c31d
Some more cleanup to PipXtreme codebase.
2012-02-24 07:49:41 -07:00
Stacey Sheldon
dc4aa07a32
board_hw_defs: factor out board-specific hw config definitions
...
Board specific HW configuration is now collected in a single .c
file for each board. This HW configuration is #include'd into
the FW, BL and BU builds for each board.
These new .c files are found in:
flight/board_hw_defs/<board_name>/board_hw_defs.c
Parts of this information were previously duplicated between
the BL and FW builds. This commit cleans up the duplication.
Using a #include on a .c file is a bit ugly but it allows us
to ensure that all of the symbols in the board_hw_defs.c file
are *ONLY* used in the PIOS_Board_Init() function for each
software build.
2012-01-22 19:41:41 -05:00
