Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
46ef59f186
OP-1379 - Rebuild and simplify the queuing mechanism
2014-09-17 01:24:01 +02:00
Alessio Morale
c49497f2e0
Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next
2014-09-15 23:49:54 +02:00
Alessio Morale
76b9b1c40f
OP-1406 - Create a support library to share common calibration and sample publishing logic
2014-09-13 16:14:34 +02:00
Alessio Morale
233dec6d8d
OP-1379 - Various fixes and additions
...
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Alessio Morale
10f5d7c531
Merge remote-tracking branch 'origin/skarlsso/OP-922_fix_fw_DEBUG_compile_errors' into next
2014-08-26 01:05:32 +02:00
Alessio Morale
e511190ad3
OP-1406 - Improve handling of external magnetometer, add additional settings
2014-08-21 19:34:35 +02:00
Stefan Karlsson
232d9c10b2
OP-922 Make it explict that matrix_mult_3x3f should be static inline
2014-08-16 16:58:16 +02:00
Corvus Corax
8daa5dfa12
Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification
2014-08-16 13:58:40 +02:00
Corvus Corax
b562fcb02e
OP-1156 fix path logic to not deviate from correct altitude too much
2014-08-15 17:56:57 +02:00
Alessio Morale
f556a5e335
OP-1379 - Split simple notification and external lednotifications libraries
2014-08-13 15:14:55 +02:00
Alessio Morale
fd92fdfadf
OP-1379 - initial version of external led sequencer implemented in notification lib.
...
Alert overlay not working yet.
2014-08-12 22:18:36 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Werner Backes
3e2961420d
Add a 3D mode to path_endpoint. This allows FlyDirect waypoints to do
...
vertical movements without changing position.
2014-07-29 13:16:39 +02:00
Corvus Corax
5451003a58
Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation
...
Conflicts:
flight/modules/Airspeed/airspeed.c
flight/modules/Airspeed/gps_airspeed.c
2014-07-26 16:16:02 +02:00
Alessio Morale
52a909185b
OP-1374 - Add sanitycheck API to detect frame type
2014-06-29 17:22:41 +02:00
Alessio Morale
1b823b7b92
Merge remote-tracking branch 'origin/Bertrand/OP-1308_Set_Same_Logic_To_Alarms' into next
...
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/StateEstimation/filtermag.c
flight/modules/System/systemmod.c
2014-06-26 20:31:27 +02:00
Alessio Morale
f30dd414ac
Merge branch 'amorale/OP-1227_cc_high_cpu_utilization' into next
2014-06-22 16:06:08 +02:00
Corvus Corax
205edac762
Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation
2014-06-17 18:14:27 +02:00
Alessio Morale
08e4ec7fd3
OP-1365 Flight code instrumentation API: Fix wrapper documentation/headers
2014-06-07 15:45:27 +02:00
Alessio Morale
2396350f2f
OP-1365 Flight code instrumentation API: Implementation of UAVObject wrapper layer
2014-06-06 22:19:27 +02:00
Corvus Corax
de7e0d0781
OP-1287 added handler definitions for new flightmodes
2014-06-04 10:29:45 +02:00
Corvus Corax
5bfb57e081
Merge branch 'next' into amorale/OP-1355_fix_mag_board_rotation_issue
2014-05-26 17:19:56 +02:00
Alessio Morale
3d67b7567e
OP-1355 Fix Mag scaling being calculated after applying board rotation.
2014-05-25 11:28:43 +02:00
Andres
f273abf6c8
OP-1317 Merged with next
2014-05-22 17:01:38 +02:00
Alessio Morale
92bf876654
OP-1350 refactor into a plans library all functions dealing with initialization and execution of PathFollower/pathplanner commands for manualcontrol
2014-05-19 18:35:18 +02:00
Andres
c5372dd0b4
OP-1317 Added better comments on the function of the partial calculation of the rotation matrix. And added a remark on the debuging variable in the airspeed object definition
2014-05-13 17:30:50 +02:00
Andres
02e62f91ed
OP-1317 Apadted airspeed calculation from ground speed and orientattion changes: applied extended IMU wind estimation, filtering takes place now with Holt-Winters double exponential smoothing on orientation vector and speed vector, matrix calculation replaced by a direct calculation of the fuselage vector, renamed gps_airspeed into imu_airspeed because estimation relies on imu results and a n estimate of ground speed and not directly a GPS signal
2014-05-10 14:50:24 +02:00
Alessio Morale
e5d6726bb6
Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour
2014-05-08 22:27:08 +02:00
Corvus Corax
0ea1ccf5c3
OP-1316 fix gravity constants
2014-05-01 15:50:02 +02:00
Alessio Morale
ee91207ede
OP-1302 simplify the code adding some pattern "tables"
2014-04-16 07:57:15 +02:00
Alessio Morale
299f388245
OP-1302 Add a stub pios_notify API for user interaction/notifications
...
right now all notifications produces the same output, the DRAW_ATTENTION sequence
2014-04-13 17:42:57 +02:00
Alessio Morale
5d637fab87
OP-1302 move stuffs away from systemmod
2014-04-13 11:54:25 +02:00
Alessio Morale
82c81fef6e
OP-1302 make leds more "readable"
...
Show alarm and arming/flightmode in sequence
Alarm:
Warning = rP
Error = rrP
Critical = R
Heartbeat/flightmode:
disarmed = B
armed/Stabilization1 = bbP
armed/Stabilization2 = bbbP
armed/Stabilization3 = bbbbP
armed/AH/AVario/Velocitycontrol = bvP
armed/PH/Pathplanner/POI = bbvP
armed/Land/RTB = bbvvP
note:
r/b/v = short red/blue/both blink
R/B/V = long red/blue/both blink
p/P = short/long pause
2014-04-12 22:00:02 +02:00
Corvus Corax
27eadc200b
Merge branch 'corvuscorax/lla2nedfilter' into next
...
Conflicts:
flight/modules/StateEstimation/stateestimation.c
2013-07-10 14:38:12 +02:00
Brian Webb
c2df59498b
Merge remote-tracking branch 'origin/master' into next
2013-07-06 07:08:30 -07:00
Corvus Corax
51a4b16af5
New Filter to calculate NED from LLA as part of StateEstimation
2013-06-30 18:49:29 +02:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Corvus Corax
6f6ca2481e
Changed CoordinateConversion to use doubles for LLA2NED conversion, so coordinates can be represented in ECEF with sufficient resolution
2013-06-05 20:40:49 +02:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Corvus Corax
80caceb984
make uncrustify_all;make uncrustify_all;
2013-05-18 14:17:26 +02:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Brian Webb
ae8286e99a
OP-932: Fixes a bug that was preventing setting of Tx power on remote modem.
2013-05-06 01:03:15 +01:00
Brian Webb
57552f4cc9
OP-932: Changed the clock syncronization to happen only on packts transmitted from the coordinator to the remote modem. The Tx finished time of the previous packet is now sent in the packet header. This is compared to the Rx complete time of that packet on the remote modem to calcualte the difference between two modems. This eliminates the need for ACKing, so ACKs were removed for PPM and status packet.
2013-05-04 16:50:08 +01:00
Corvus Corax
25c58ff074
Put all EKF initialisation values in a separate UAVObject EKFConfiguration,
...
adapted insgps13state.c/.h,
modules/Attitude/revolution,
configrevowidget.cpp,
accordingly.
2013-05-03 02:17:44 +02:00
Richard Flay (Hyper)
84e1a81f8b
OP-936: Moves the task monitor code out of the flight library and into PiOS.
...
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.
+review OPReview
2013-05-03 07:01:14 +09:30
Corvus Corax
d77c690fe3
Merge branch 'next' into corvuscorax/Attitude-fixes
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
2013-05-01 17:51:05 +02:00
Brian Webb
8c763c8ed3
OP-932: Improves the timing of channel changes on the radio device.
2013-05-01 14:37:47 +01:00
Brian Webb
56a524ab9e
OP-924: Completely turn off PPM output when it's not being refreshed. Also fixed testing of PPM input on the OPlink that was broken when the return values were changed to negative values. The PPM values were being stored in an unsigned datatype, which made detecting negative error returns impossible.
2013-05-01 02:48:45 +01:00
Corvus Corax
6e2c9b3c46
New EKFStateVariance UAVObject with EKF state variance information
2013-04-28 19:38:37 +02:00
