James Cotton
ff1b1a93cf
Implement a virtual flybar in a way inspired by behavior of Align 3G which
...
seems apply a leaky integrator to the swash angle. This is the similar to what
is done by Phubar (http://code.google.com/p/phubar/ ) as well although we refer
to the gyro term as the proportional and the flybar angle as the integral
2012-06-04 12:22:38 -05:00
James Cotton
1b55df733d
Create virtual flybar setting for stabilization modes
2012-06-04 12:22:38 -05:00
James Cotton
daaa661080
Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed.
...
Conflicts:
shared/uavobjectdefinition/hwsettings.xml
2012-06-04 10:50:45 -05:00
James Cotton
b11b606ddc
Fix RTH mode. Now works in simulation when GCSReceiver goes invalid.
...
There is a small issue that when it is in RTH failsafe mode and you regain
signal and your throttle is low you will disarm due to the timeout. That
means you'd suddenly get it back and plumet ouf of the sky. If you are
still holding throttle (which most people might do?) you will have control.
The timeout needs to probably start when you regain signal.
2012-06-04 10:25:43 -05:00
James Cotton
10aa31a57f
When ManualControlSettings.FailsafeBehavior is set to RTH and no valid input is
...
detected and the aircraft is armed enter RTH mode.
2012-06-04 09:48:05 -05:00
James Cotton
21eb48c58c
Add a RTH flight mode and remove it from the waypoint actions as that is
...
redundant with flying to (0,0,0)
2012-06-03 22:14:11 -05:00
James Cotton
9707c6152a
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-03 19:13:01 -05:00
James Cotton
71e14a691e
Merge branch 'next' into revo
2012-06-03 19:00:51 -05:00
James Cotton
e341a37bd1
Need to add a small delay after save for the load to work correctly. Odd.
2012-06-03 17:26:10 -05:00
Brian Webb
36f62be3b9
Fixed packet error detection and improved RSSI reading.
2012-06-03 10:07:08 -07:00
Corvus Corax
be72d24c5f
Attitude: Fixed calculation for baro offset adjustment time
2012-06-03 09:52:24 -05:00
Corvus Corax
b06b51f1b2
Revolution/Attitude: Added offset calculation for barometric altitude
2012-06-03 09:52:14 -05:00
James Cotton
c892a28970
Fix firmware to work with new usage of the action waypoint field
2012-06-03 09:36:21 -05:00
James Cotton
4ad23864c8
Treat the waypoint action as something to do once you hit that location. (e.g.
...
PathToNext) and add a Stop value to indicate not to advance to the next
waypoint. This is essentially a perament loiter to the pathfollower (I think)
but it's really just to have the ability to "delete" waypoints.
2012-06-02 18:40:53 -05:00
James Cotton
25f85ee4fe
Add an error flag to ObjectPersistence and when saving a setting make it verify
...
that the data reads successfully.
2012-06-02 10:23:27 -05:00
Brian Webb
df8a5f8f27
Changed update period for PPM inputs on the PipX. Fixed LED code.
2012-05-31 18:56:07 -07:00
Brian Webb
9a6fb60dd6
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-28 20:18:59 -07:00
James Cotton
a89b880609
Fix compilation error on CopterControl because it doesn't support some of the
...
path functionality. These configurations that could result in
updatePathDesired or altitudeHoldDesired being called should result in an error
on startup to block arming.
2012-05-28 20:33:49 -05:00
James Cotton
88cf100430
Merge remote-tracking branch 'revo/amorale/revo' into revo
2012-05-28 20:27:51 -05:00
a*morale
d071491265
removed include for positiondesired.h
2012-05-29 00:56:39 +02:00
a*morale
468e8732f5
Fix for FlightBattertData ConsumedEnergy calculation
2012-05-29 00:55:03 +02:00
James Cotton
1934752d50
Merge branch 'revo-next' into revo
2012-05-28 15:23:14 -05:00
Oleg Semyonov
5739dfbfc8
Merge remote-tracking branch 'origin/next' into os/aerosimrc
...
Conflicts:
shared/uavobjectdefinition/gcsreceiver.xml
2012-05-28 21:46:43 +03:00
Oleg Semyonov
910b465ac6
AeroSimRC: do not update sensor and/or attitude data if read-only flag is set
2012-05-28 19:44:34 +03:00
James Cotton
4360d8adfd
Merge branch 'next' into revo-next
2012-05-28 11:25:40 -05:00
James Cotton
8a6073fbaf
Merge remote-tracking branch 'revo/revo-next' into testing
...
Conflicts:
Makefile
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/Revolution/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c
Merge remote branch 'origin/stac/etasv3' into revo-next
2012-05-28 12:56:27 +02:00
Oleg Semyonov
f95d29a3b8
TxPID: add GyroTau to the list of parameters (OP-637)
2012-05-28 12:48:55 +03:00
James Cotton
5a6e02a688
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-05-25 20:37:23 -05:00
Brian Webb
b824c87056
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01
Tuning configutation of PipX.
2012-05-24 18:08:29 -07:00
Corvus Corax
64c1ac3bd6
Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs
2012-05-22 22:19:31 +02:00
Brian Webb
2f1a9e3e7d
Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout.
2012-05-20 18:30:37 -07:00
Brian Webb
6a7179120d
Fixed setting of PipX description, and changed gcs receiver object to be update on change on flight side so that it works on the PipX.
2012-05-19 09:25:11 -07:00
Brian Webb
c25884bcaf
Cleanup on the PipX branch.
2012-05-18 17:42:25 -07:00
Brian Webb
68d66d4181
Fixed firmware description in PipX status.
2012-05-17 20:35:17 -07:00
Brian Webb
6fbc3339d5
Fixed processing of UAVTalk packets when in transparent com mode.
2012-05-17 18:37:45 -07:00
Brian Webb
44a1663eb9
Fixed transparent comm on PipX.
2012-05-16 19:02:53 -07:00
Brian Webb
7082eda175
Fixed returning status for currently paired modem.
2012-05-15 20:11:52 -07:00
Brian Webb
93ec7c11a6
Fixed race condition on getting packets.
2012-05-15 19:38:14 -07:00
James Cotton
af8d65616e
Comment out some unused variables in the PIOS_ADC structure for now since they
...
were consuming lots of memory. Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
2012-05-15 03:48:32 -05:00
James Cotton
39ce3cea17
Clean up the battery module
2012-05-15 03:08:18 -05:00
James Cotton
0a7f5fd5d3
Enable battery code again
2012-05-15 00:38:11 -05:00
Brian Webb
a3269aaf2f
Reverted some file permission changes.
2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f
Fixed some bugs with setting PairIDs in GCS.
2012-05-13 14:24:00 -07:00
Brian Webb
dd03b0b159
Added reporting of stats from the remote modem.
2012-05-13 09:34:21 -07:00
Brian Webb
ec67742ff6
Added configuration of COM ports on PipX.
2012-05-12 13:16:36 -07:00
James Cotton
46fc5fa4fb
Create a PathPlannerSettings object and move the PathMode setting to there.
...
Also add a (temporary) field to allow storing some custom paths to select on
the fly. Later will be replaced with some code to fetch from the flash chip.
2012-05-12 13:12:57 -05:00
James Cotton
836e34a483
Change revo sensors to update at 500 Hz and make sure in all cases it waits for
...
the relevant queue to provide data. Also disable the quaternion stabilization
flag.
2012-05-12 13:12:56 -05:00
James Cotton
2ca3cde83f
Improve EKF initialization. For some reason we must read an extra mag sample
...
when power up value of attitude algorithm is EKF. I don't understand why the
first mag value is bad.
2012-05-12 13:00:51 -05:00
James Cotton
98655aacc8
Fix initialization of the complimentary filter where it didn't get the right
...
initial dT
2012-05-12 13:00:50 -05:00
Brian Webb
1f5dbcf57c
Mostly complete PipX configuration GUI.
2012-05-11 17:51:18 -07:00
James Cotton
4ec4edd15c
When enabling position hold altitude mode take the throttle from before as the
...
"hover" throttle
2012-05-08 03:12:14 -05:00
James Cotton
2857b58f8e
Migrate path planner from position desired to path desired
2012-05-08 03:04:44 -05:00
James Cotton
37bb2cfb77
Finish getting rid of PositionDesired in favor of PathDesired and add the
...
ability to move the magic waypoint with the transmitter
2012-05-08 02:42:58 -05:00
James Cotton
a8bdd4a44a
Coalescene PositionDesired and PathDesired into PathDesired and add a mode
...
field to indicate how it should be interpreted.
2012-05-08 02:29:58 -05:00
James Cotton
27d1c4be93
Extend list of airframe types for VTOL guidance
2012-05-08 02:29:58 -05:00
James Cotton
cbedb5b53b
Move Guidance to VtolPathFollower to make room for FWPathFollower
2012-05-08 02:29:50 -05:00
James Cotton
0f2c41ac5d
Merge branch 'revolution' into navigation
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-05-07 21:53:10 -05:00
James Cotton
6aa7142f5e
When guidance finds an incorrect airframe, delay 100ms to avoid hammering the
...
alarms
2012-05-07 12:55:35 -05:00
Sambas
dedbbec8f0
Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board.
...
USB interrupt fix.
Heap warning critical sizes backwards.
2012-05-07 12:51:07 -05:00
Oleg Semyonov
a3906aa7ea
Merge remote-tracking branch 'origin/hhrhhr/AeroSimRC_plugin' into os/aerosimrc
2012-05-07 16:09:35 +03:00
James Cotton
a40a0b0e31
Small fix to be able to build CC for Revo branch and to include revo in
...
package.
2012-05-07 01:55:52 -05:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
352471857f
Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread.
2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b
Fixed failed merge with next.
2012-05-06 12:38:13 -07:00
Brian Webb
480371a43e
Resolving merge with origin/next
2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
James Cotton
6c0dc80978
Shuffle more stack sizes around
2012-05-05 11:33:47 -05:00
Werner Backes
22df8310c4
Fixed typo in comment
2012-05-05 11:10:53 -05:00
Werner Backes
f52f5b3d83
Don't process RMC sentences that are flaged as 'void'
2012-05-05 11:10:45 -05:00
Werner Backes
6b463e5c9e
Check GGA NMEA sentence for no/invalid fix flag
2012-05-05 11:10:38 -05:00
Werner Backes
217860c187
Check for empty fields during lat/lon conversion (invalid GPS fix)
2012-05-05 11:10:32 -05:00
Brian Webb
44d95003f3
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-03 17:56:08 -07:00
James Cotton
3155324384
Merge branch 'next' into cc3d
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
shared/uavobjectdefinition/ahrscalibration.xml
shared/uavobjectdefinition/ahrssettings.xml
shared/uavobjectdefinition/attituderaw.xml
2012-05-03 16:31:49 -05:00
Brian Webb
249ededcfd
Added responding to OBJ_REQ and sending ACK/NACK on PipX.
2012-05-02 20:51:29 -07:00
Brian Webb
290acf0398
Fixed watchdog timeouts.
2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37
Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling.
2012-05-01 19:14:58 -07:00
Brian Webb
25ffb99cee
Added initialization of flash eeprom for saving settings to PipX.
2012-04-28 19:29:56 -07:00
James Cotton
fb53d5621a
Change the magKp term (hardcoded still) for revo complimentary filter so it
...
tracks magnetic north when homelocation is set.
2012-04-22 19:01:41 -05:00
James Cotton
2890fcdc9f
When in complimentary filter mode use GPSVelocity so event system doesn't have
...
warning.
2012-04-22 19:01:18 -05:00
Brian Webb
aab47d6ed4
Final updates to throttled mode and further memeory reduction in the object manager and event dispatcher to reflect smaller data sizes in metadata.
2012-04-22 14:56:26 -07:00
Brian Webb
ed1937958e
Changed PipX UAVTalkProcessInputStream calls to UAVTalkProcessInputStreamQuiet.
2012-04-22 08:45:01 -07:00
Brian Webb
f726cc6a9d
Added a RTC supervisor timer to RFM22B driver.
2012-04-21 18:31:49 -07:00
Brian Webb
eb6f175af4
Fixed metadata settings in object browswer, and removed update mode never from all uavobjects that used it (changed to manual).
2012-04-21 11:59:14 -07:00
Brian Webb
19166cc830
Added UPDATEMODE_THROTTLED to UAVObjects update modes.
2012-04-18 18:47:13 -07:00
Corvus Corax
1c3dc9c9e1
Airspeed: fixed calculation math - no more zero zone
2012-04-18 14:41:41 +02:00
Corvus Corax
d125abf335
Baro calibration
2012-04-18 10:48:31 +02:00
Brian Webb
62c5036220
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
2012-04-17 17:36:05 -07:00
Corvus Corax
3da88601a1
Airspeed module works, needs conversion
2012-04-17 20:32:56 +02:00
Corvus Corax
317cff10dd
debug code added - revert this when no longer needed
2012-04-17 18:59:46 +02:00
Corvus Corax
edf26d15e6
Airspeed: some more fixes
2012-04-17 16:38:53 +02:00
Corvus Corax
5159d2029b
new airspeed module - still needs matching PIOS driver from stac
2012-04-17 15:54:05 +02:00
James Cotton
ad074aee4b
Fix nasty bug in guidance where I missed some breaks
2012-04-16 08:59:25 -05:00
James Cotton
a7ba6d96c1
Allow guidance to run purely off raw GPS data
2012-04-15 16:23:34 -05:00
James Cotton
050c756d54
Merge branch 'revolution_path' into testing
2012-04-15 12:34:31 -05:00
James Cotton
4928cbba44
Merge branch 'sim' into testing
2012-04-15 12:34:27 -05:00
James Cotton
59da9deffb
Merge remote-tracking branch 'revo/D-Lite/ubx-parser' into sim
2012-04-15 12:33:54 -05:00
James Cotton
6a094ac326
Increase stack for the path planner
2012-04-15 12:31:50 -05:00
Corvus Corax
88f7567247
change to GPS: do not update UAVObject more than 1ce per cycle
2012-04-15 19:17:03 +02:00
