Erik Gustavsson
4312652241
Use enum to index array.
...
Replace 0 with 0.0f in assignment.
2012-11-29 00:03:39 +02:00
Erik Gustavsson
5e14f5352f
Minor codestyle/whitespace cleanup
2012-11-29 00:03:38 +02:00
Erik Gustavsson
dc5394dcf3
Add setting to suppress axis output from Stabilization module until armed and throttle is applied. Useful to keep the tail prop out of the grass while arming a tri.
2012-11-29 00:03:37 +02:00
Oleg Semyonov
22173d96e5
Merge remote-tracking branch 'origin/cyr/accel_filter' into rel-12.10.2
2012-11-14 04:44:11 +02:00
Erik Gustavsson
f9f58f22d8
Take the magnitude of the correct gravity vector
2012-11-12 17:16:28 +01:00
Erik Gustavsson
e38ba912cd
Clarify comment about gravity vector
2012-11-11 21:13:05 +01:00
Erik Gustavsson
04c194fa48
Coding style fixes
2012-11-11 21:10:52 +01:00
Richard Flay (Hyper)
54ebcb1ea8
Removed a spurious call to AccelsSet() that was causing garbage data to be transiently written to the Accels UAVO. Props to cyr for kicking off the discussion that led to the discovery of this bug.
2012-11-11 00:31:08 +02:00
lilvinz
a7029baa32
pios_jedec: fixed usage of uninitialized memory
...
When reading the jedec device id the code only transfered one byte via spi leaving
the expected input buffer uninitialized. This may lead to the problem that flash
initialization fails because the expected input may be whatever the stack was set
when entering the function. The impact of the bug is somewhat limited tough as the
initialization usually takes place before starting up the rtos and thus is pretty
deterministic. So if the code passed init while testing it should pass init in
production as well.
2012-11-11 00:31:07 +02:00
Erik Gustavsson
104c61a174
Move accel filter to separate function, for cleaner code and easier filter alteration.
...
Optimize for filter disabled case (AccelTau = 0.0).
2012-11-06 20:17:10 +01:00
Erik Gustavsson
677f921b15
Take magnitude of filtered gravity vector into account.
2012-11-02 09:22:18 +01:00
Erik Gustavsson
f63db712d0
Disable accel smoothing during init/arming so it does not interfere
2012-11-02 09:12:24 +01:00
Erik Gustavsson
b7bdf9861d
Run rotated gravity vector through smoothing filter to match phase with filtered accelerometer data.
2012-11-01 12:14:33 +01:00
Erik Gustavsson
c207afbfef
Implement smoothing filter for accelerometer data.
2012-10-31 19:05:59 +01:00
Stacey Sheldon
157aeac9fc
Merge remote-tracking branch 'origin/stac/ppm-and-pwm-inputs' into next
2012-10-06 23:04:49 -04:00
sambas
9212bbeb20
DSMx bindmode delay was too long, satellite binding works again.
2012-10-07 12:09:42 +11:00
James Cotton
c8d9f89ea3
Default DIAG_TASK was on for PipX
2012-10-03 15:11:15 -05:00
James Cotton
897b07da02
Merge remote-tracking branch 'origin/kenz/diag_stack_split' into next
2012-10-02 14:20:08 -05:00
Stacey Sheldon
2f4b1e69dd
rcvr: Support PPM and PWM at the same time on CC
...
Adds a new mode for the receiver port (PPM+PWM) which
will allow simultaneous use of 1 pin for PPM and the
rest of the pins for PWM inputs.
2012-09-29 19:11:48 -04:00
James Cotton
b0d8487e27
PIOS_RFM22: Make the irq return false for the exti changes
2012-09-28 02:14:15 -05:00
James Cotton
8979c00fba
Merge branch 'exti_end_switching_isr' into next
2012-09-28 00:41:08 -05:00
James Cotton
519e3e2e3a
PIOS_EXTI: Make the line task macro now take in the xHigherTaskPriority variable name
2012-09-28 00:40:36 -05:00
James Cotton
f12d5c04fb
Merge remote-tracking branch 'origin/lilvinz/mpu6000_masked_locals_fix' into next
2012-09-27 14:43:54 -05:00
James Cotton
1ba40ee9b0
PIOS_EXTI: Make sure to use pdTRUE instead of true where appropriate.
2012-09-27 14:41:38 -05:00
James Cotton
1721479a12
Fix for vinz' merge to pios_mpu6000 exti changes
2012-09-27 14:34:11 -05:00
James Cotton
a021659b75
Merge remote-tracking branch 'origin/lilvinz/exti_end_switching_isr' into next
2012-09-27 14:31:16 -05:00
Laura Sebesta
8997df2438
Merge branch 'next' into kenz/diag_stack_split
...
Conflicts:
flight/Modules/Stabilization/stabilization.c
2012-09-27 19:29:23 +02:00
Laura Sebesta
4923655cd3
Added global flag for enabling all diagnostic tools.
2012-09-27 18:51:12 +02:00
Stacey Sheldon
215ff56fe8
usbcdc: fix handling of CDC SET_LINE_CODING request
...
The SET_LINE_CODING request contains data and must be
handled as such.
Previously, the only requests that had data were IN
requests. SET_LINE_CODING is an OUT request so it
required additional changes to support a new type of
data request.
2012-09-24 00:56:25 -04:00
Stacey Sheldon
5e37448814
usb: correct enum for CDC SET_CONTROL_LINE_STATE request
2012-09-24 00:53:52 -04:00
Stacey Sheldon
c056ac5261
usbcdc: don't assert on calls when CDC is not initialized
...
The CDC interface is always advertised in the FW USB
descriptors. It is NOT always enabled/initialized at
runtime. Specifically, it can be Disabled in HwSettings.
Previously, any CDC-related query that the host would send
resulted in an assert and a watchdog.
Now, a suitable return code indicating that the request is
unsupported is returned in this scenario.
2012-09-24 00:53:12 -04:00
Stacey Sheldon
14123069be
gdb: add gdb config file for CC BU image
2012-09-16 21:13:42 -04:00
Stacey Sheldon
368d57bc92
Merge remote-tracking branch 'origin/lilvinz/OP-300' into next
2012-09-16 16:05:25 -04:00
lilvinz
a6a7ed8157
pios_exti: added returnvalues to exti handlers which allows to use portEND_SWITCHING_ISR
2012-09-16 21:44:09 +02:00
Stacey Sheldon
05483e2a74
simposix: adapt simposix to addition of relay tuning
2012-09-16 15:40:47 -04:00
lilvinz
524cff1c40
pios_mpu6000: fixed masked locals mistake
2012-09-16 21:25:06 +02:00
lilvinz
718062ed6e
pios_led: added support for active_high connected leds
2012-09-16 18:19:27 +02:00
James Cotton
595083c982
PID: Fix small bug in setpoint weighting that had really ugly consequences
2012-09-12 00:07:17 -05:00
James Cotton
4717c376c0
Stabilization: For the inner loop call the setpoint shaping version so that
...
the derivative term can weight the sticks and gyros independently.
2012-09-11 13:21:53 -05:00
James Cotton
e4a167dca1
PID: Add a pid_apply_setpoint which takes in the setpoint and feedback term
...
This version allows performing setpoint weighting, currently on the derivative
component.
2012-09-11 13:21:19 -05:00
James Cotton
11b099b1ef
Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass
...
them in to the PID system.
2012-09-11 12:29:38 -05:00
James Cotton
42bbd52d68
PID: Add a function to set the cutoff for the derivative term
...
Also contains a term for setting the deriative setpoint in the future
2012-09-11 12:27:41 -05:00
James Cotton
fa9a616b4c
PID: Add the 20 Hz low pass filter to the derivative term
2012-09-10 03:14:02 -05:00
James Cotton
9763a70364
Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning
...
Conflicts:
flight/Modules/Stabilization/stabilization.c
2012-09-10 03:10:26 -05:00
Igor Van Airde
8ca99739ed
Changed rate controller from PID to PIDT1 to improve flight stability.
...
Low pass on D-Term makes the D-Term usable to improve flight stability.
Affects rate and stabilize mode.
2012-09-09 13:07:25 +02:00
Werner Backes
2a4e135c81
Merge branch 'D-Lite/fix_CC3D_yawBias_correction' into next
2012-09-06 13:47:03 +02:00
Werner Backes
4803dfe99c
Fix: yaw bias correction wasn't applied on CC3D.
2012-09-06 13:13:58 +02:00
Stacey Sheldon
97882dbef9
pipx: ensure pipx BL image is padded to fill its bank
...
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
Stacey Sheldon
803e3c4d1e
ef: Add fwinfo to entireflash (EF) images
...
EF images were missing the firmware info blob that describes
which firmware is installed on the board. The EF image is now
padded out to fill the firmware bank and the info blob is
properly placed at the tail end of the firmware bank.
2012-09-05 21:45:59 -04:00
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
