1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Commit Graph

30 Commits

Author SHA1 Message Date
Oleg Semyonov
b73ddffbf0 pios: STM32F10x PIOS #ifdef guards 2013-03-24 13:03:55 +02:00
Stacey Sheldon
29ab1d8cf3 actuator: factor out settings updates from main loop 2012-08-11 19:46:00 -04:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
2011-08-27 21:39:56 -04:00
James Cotton
2da65014c7 Fix typo in servo doxygen header 2011-07-16 03:25:33 -05:00
Mathieu Rondonneau
6e64a546df Remove un-used code 2011-06-02 20:21:26 -07:00
peabody124
c9207b3754 CC-14 PIOS/Servo: Set more than two bank speeds
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2658 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:55 +00:00
peabody124
2881370eab OP-291 PIOS/Servo: Refer to channels by TIM_Channel_x to be consistent with PWM
system

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2571 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:54 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:48 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure.
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:45 +00:00
peabody124
01b09668aa OP-291 PIOS/Servo: Dont need to power up GPIOA/GPIOB in servo since done in sys
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2567 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:41 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 03:40:21 +00:00
peabody124
8a32d88b10 OP-265 CC: More work to get it running
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:47 +00:00
peabody124
3c021c09d9 Flight/PiOS: Whitespace changes
find ./flight/PiOS/inc/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{}
bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1
-il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1777 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:45 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 19:53:35 +00:00
peabody124
99e94228a9 More doxygen updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 05:31:11 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 01:54:43 +00:00
FredericG
c8f818a809 Do not configure the servo outputs when ENABLE_AUX_UART
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@839 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:02:26 +00:00
gussy
0aba12fe1f Loopback test of HID working. Still a WIP but committing what I have to show progress.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@582 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-04 18:54:43 +00:00
vassilis
f4c4b1371a Flight/Settings: Remove old settings implementation (replaced with binary settings as UAVObjects)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@465 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-10 01:35:13 +00:00
fredericg
47038af0c0 PIOS_DONT_USE_XXX => PIOS_INCLUDE_XXX
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-11 12:38:51 +00:00
gussy
098cff2145 Small typo fix.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@264 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-07 12:25:29 +00:00
fredericg
0310339cb6 Introduced ENABLE_DEBUG_PINS option in makefile that will enable the debug-pins and disable the servo outputs
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@233 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-03 16:16:43 +00:00
gussy
a5d56cd537 Small re-factorings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@230 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-03 10:55:49 +00:00
gussy
0968b0adf9 Added provisions for TurboPWM and other custom servo update rates.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@226 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-03 07:46:40 +00:00
gussy
9953188fe2 PIOS_SYS now non-application specific.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@208 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 08:44:01 +00:00
gussy
adcd47a31b Added ability to enable and disable PiOS modules.
Added PIOS_USB_COM.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@202 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 06:47:49 +00:00
gussy
9bce59ef1a Small cleanup changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@200 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 04:47:51 +00:00
gussy
3b32b89839 Updated copyright headers.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@146 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-31 17:56:54 +00:00
gussy
c1ab22f595 Added variety of helper functions to PIOS_SDCARD.
Made minGlue even more robust and simpler.
Fixed a small bug with the servo output code, which is now working 100%.
Enabled USART, which can now be used for debugging.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@138 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-01-24 13:03:13 +00:00
gussy
e174898bf2 Added pios_servo. Straight from ST examples.
Updated printf-stdarg to use debug port.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@53 ebee16cc-31ac-478f-84a7-5cbb03baadba
2009-12-03 21:30:53 +00:00