Brian Webb
dc5eef0cb5
LP-499 Adds support for bridging either radio primary, radio auxilary, and/or VCP to any of the output ports (main, flexi, VCP, HID). Also adds the ability to configure the com speed of the UARTs independent of the air data rate.
2017-04-22 09:36:04 -07:00
Eric Price
545f1c863b
LP-500 HoTT Bridge Module ported from TauLabs
2017-03-24 07:56:19 +01:00
Vladimir Zidar
191f92ce91
LP-270 - Updated copyright years
2017-01-23 13:50:22 +01:00
Vladimir Zidar
4bb5bee32b
LP-270 - Add baud rate and mode parameters. Store working copy of usart init structure for private use, so we do not revert to original config before every change. Re-enable usart after changing parameters.
2017-01-23 13:39:40 +01:00
Alessio Morale
6d80b55c60
LP-270 - Implement PIOS_COM_ChangeConfig API (F1)
2017-01-23 13:39:39 +01:00
Philippe Renon
33188bd78e
Merge remote-tracking branch 'upstream/master' into next
...
# Conflicts:
# ground/gcs/src/plugins/coreplugin/connectionmanager.cpp
2016-12-13 00:56:32 +01:00
Vladimir Zidar
64bf884f96
LP-391 Changed PIOS_COM_Init buffer len parameters to uint16_t type. Fixed simposix pios_board.c GPSPORT_GPS init incorrectly passing -1 to PIOS_Board_configure_com() which was on some platforms converted to large unsigned value.
2016-11-26 21:51:29 +01:00
Philippe Renon
aef6d65b1f
Merged in mindnever/librepilot/LP-413_add_PIOS_COM_RegisterAvailableCallback (pull request #333 )
...
LP-413 This commit adds PIOS_COM_RegisterAvailableCallback() function.
2016-10-05 21:45:32 +02:00
Vladimir Zidar
5d8274357d
LP-413 This commit adds PIOS_COM_RegisterAvailableCallback() function.
2016-09-24 01:10:31 +02:00
Vladimir Zidar
87035d953c
LP-412 Allow access to rx & tx callbacks through pios_com device API.
2016-09-24 01:07:01 +02:00
Philippe Renon
52a9aa37c8
Merged in mindnever/librepilot/LP-391_fix_Some_CC3D_ports_cause_a_boot_issue_and_re_init_to_defaults (pull request #307 )
...
LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init().
2016-08-30 09:56:53 +02:00
Vladimir Zidar
107aa2170e
LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init().
2016-08-30 02:03:10 +02:00
Vladimir Zidar
b1f7f5e4bf
LP-377 Implement handling of USB_CDC_REQ_SET_LINE_CODING control request for F4 and F1 targets. Removes UsbComBridgeSpeed from hwsettings object. Removes GCS combo boxes related to UsbComBridgeSpeed. Fixes few places where UsbComBridgeSpeed was used for DebugConsole speed config.
2016-08-30 01:22:57 +02:00
Vladimir Zidar
27cc48b362
LP-343 Change return type from PIOS_COM_Available() to give extended status about RX and TX availability on given COM device.
2016-06-22 01:57:08 +02:00
Steve Evans
7445add280
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
2015-04-26 03:05:47 +01:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
93cf6b457f
OP-1507 - optimize com fifo usage when RX callback receives a single byte
2014-09-27 00:20:15 +02:00
Alessio Morale
94c39caa50
OP-1275 - Fix PIOS_COM to be used with no PIOS_INCLUDE_FREERTOS defined
2014-09-16 00:42:51 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
da5ef3b3cc
OP-1218 Raise time PIOS_COM_SendBuffer waits to acquire sendbuffer semaphore
2014-02-15 22:05:56 +01:00
Alessio Morale
8cd5cfe2eb
OP-1218 format/consmetic/comments fixes
2014-02-15 22:05:56 +01:00
Alessio Morale
79b68ae886
OP-1218 locks SendBuffer under the same mutex as SendBufferNonBlocking
2014-02-09 19:57:05 +01:00
Alessio Morale
590c27af29
OP-1218 fix thread safety issue with pios_com PIOS_COM_SendBufferNonBlocking
...
(kudos @filnet for finding this)
2014-02-09 11:37:02 +01:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
37eabb0931
Pointed type is explicitly used with sizeof when dealing with struct pointers.
...
+review OPReview-474
2013-05-19 12:00:16 +02:00
Stacey Sheldon
b56f5206bd
com/usart/cdc: ensure that device structs are memset before use
...
CDC and USART device drivers were not all clearing their
device structs before using them.
This specifically caused crashes in the case where the upper
COM layer was binding only a Tx path. The Rx path callback
in the lower driver was uninitialized random data and would
result in the lower driver faulting when it tried to call the
callback.
Conflicts:
flight/PiOS/STM32F30x/pios_usart.c
flight/PiOS/STM32F30x/pios_usb_cdc.c
flight/PiOS/STM32F30x/pios_usb_hid.c
2013-05-11 22:40:59 +02:00
Stacey Sheldon
e16be98224
usb cdc: ensure com buffer is drained when no DTE is attached
...
The CDC layer on F1, F3 and F4 now always acts like an
infinte data sink whenever *either* there is no DTE present
(ie. no terminal program listening) *or* the USB cable is
disconnected.
F1 and F4 were previously checking the cable but not the DTE.
F3 didn't check anything. The COM layer didn't even ask the
lower layers.
All of this used to mean that any time a caller did a blocking
send to a CDC device without a DTE, it would eventually block
for up to a 5s timeout waiting for space in the Tx buffer.
Conflicts:
flight/PiOS/STM32F30x/pios_usb_cdc.c
2013-05-11 22:40:58 +02:00
Oleg Semyonov
b6e1331e5d
Rename flight/PiOS->flight/pios
2013-04-25 13:13:41 +03:00
