rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
4,931 Commits 5 Branches 8 Tags 266 MiB
61d59828dc
Commit Graph

483 Commits

Author SHA1 Message Date
Oleg Semyonov
a8b36ddd28 HwSettings: disable GPS and telemetry port speed updates at run-time 
This is to be consistent across the HwSettings object fields which are
read on boot only by convention.
 2011-10-31 23:04:17 +02:00
Oleg Semyonov
0116e6a007 spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support 
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.

For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.

Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.

Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.

Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.

The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
 2011-10-30 19:29:03 +02:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-10-26 13:18:44 -05:00
Oleg Semyonov
f71361ca83 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/Modules/System/systemmod.c
 2011-10-22 23:00:47 +03:00
Corvus Corax
cb8d9c791c PiOS.posix: fixed missing defines in pios_config. removed platform specific inclde from Systemmod (pios_config.h gets included from pios.h) 2011-10-19 22:28:39 +02:00
Corvus Corax
b00751af91 Systemmod bugfix: UAVObject used without Initialization 2011-10-19 22:28:08 +02:00
Corvus Corax
425bc5abbe PiOS.posix: PIOS_RCVR : fix posix port of pios_rcvr to allow compilation on 64bit systems 2011-10-11 18:07:04 +02:00
Oleg Semyonov
7800fbe6de gps: initialize GPS UAVO and start GPS module only if port is configured 2011-09-29 00:41:51 +03:00
Oleg Semyonov
a38c569cd0 HwSettings: move Telemetry and add GPS port speed to the HwSettings object 
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
 2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	shared/uavobjectdefinition/hwsettings.xml
 2011-09-28 22:02:02 +03:00
James Cotton
06190d1d95 Fix altitude hold dead band range 2011-09-13 10:34:56 -05:00
James Cotton
1783817b96 INS: First pass at altitude hold code 2011-09-13 01:44:53 -05:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
c36297227d Stabilization fix typo 2011-09-12 11:56:01 -05:00
James Cotton
63bb80649b Merge branch 'max_rate_for_attitude' into next 2011-09-12 11:51:03 -05:00
James Cotton
5b836db54c INS/Guidance: Convert distance to using m instead of cm. This is mainly to be 
able to use NAN to indicate when values aren't valid from INS.
 2011-09-11 23:02:05 -05:00
James Cotton
8f2fad6918 Fix for merging with the collective channel with the swashplate fix. 2011-09-11 18:53:10 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
James Cotton
b38081bb1b Stabilization: When in none mode zero the integral accumulators for rate and 
attitude loops.  When not using outer loop zero that accumulator.
 2011-09-11 16:33:38 -05:00
James Cotton
6945f17eba Make the StabilizationSettings.MaxRate field only apply to the stabilized 
modes.  That way ManualRate can exceed MaxRate.
 2011-09-11 12:27:17 -05:00
James Cotton
b8bb2dd2ca Merge branch 'next' into ins 2011-09-10 17:02:15 -05:00
James Cotton
f725fbe128 CopterControl: Fix build due to changing the AttitudeRaw structure. 2011-09-10 13:56:00 -05:00
James Cotton
199db1362d Actuator: Found a bug in actuator that affects how throttle and pitch curves 
were used.  Basically 80% was always 100%.  This should make hovering better
and fix heli swash pitch.
 2011-09-09 19:40:58 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
dfe91af686 UAVObjects: Space allocated in manualcontrolcommand did not match the number of 
channels in settings.  Fixed this and added assertion to catch in future.
 2011-09-09 01:17:13 -05:00
James Cotton
1a5fd9f30e Heli: Added an explicit collective channel. Also make the default channel 
number 0 since that is not invalid.
 2011-09-07 01:48:39 -05:00
James Cotton
72625d9971 PiOS RCVR: Make the public API use a 1 based indexing for channel numbers. 
This may or may not get into next, but if so anyone following it MUST
reconfigure their inputs.
 2011-09-06 16:39:08 -05:00
James Cotton
8f7712435f Merge branch 'safer_failsafe' into next 2011-09-06 16:23:11 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
James Cotton
7ff5cd7655 INS: Try and get load down on event system. 2011-09-04 16:21:04 -05:00
James Cotton
b1e0366525 Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next 
Conflicts:
	flight/OpenPilot/System/pios_board.c
 2011-09-04 13:33:52 -05:00
James Cotton
510a1760ca When disconnected set any accessory channels to neutral. Otherwise the 
actuator module could keep the pitch at high.  However the "right" thing to do
seems very specific.  For example negative pitch is probably preferable.
 2011-09-04 03:45:36 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
20de046292 Force system to be disarmed when a bad configuration is present 2011-09-04 00:43:33 -05:00
James Cotton
d3de8ff0ef OP-559: Process the arm status when disconnect and allow it to timeout and 
disarm
 2011-09-03 23:57:51 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make 
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
 2011-09-03 23:50:56 -05:00
James Cotton
3b20df22d1 Updates to config gadget for new INS objects 
Make scope gadget check if object exists before using it.  Avoids segfaults
when scoped objects disappear.
 2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4 This patch breaks backward compatibility with AHRS solidly. 
Move the configuration files for INS from AHRS* to INS*.  Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
 2011-09-01 12:21:33 -05:00
Stacey Sheldon
a72c657e21 rcvr activity: Speed up activity acquisition 
Activity detection logic can now move through
the active receivers more quickly.
 2011-08-27 20:17:56 -04:00
James Cotton
6514fd95c7 Also initialize the ReceiverActivity object in manual control 2011-08-27 16:08:57 -05:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-27 15:26:05 -05:00
James Cotton
1d77d77832 Merge branch 'stac/use-malloc-failed-hook' into next 2011-08-27 00:24:13 -05:00
Corvus Corax
658ae3f809 Modules/System: removed comment line 2011-08-25 16:26:46 +02:00
Corvus Corax
109a58ef30 Modules/GPS: removed comment line 2011-08-25 16:25:19 +02:00
Corvus Corax
8173c7b7c6 Refactor GPS_PURISTIC into GPS_MINIMAL 2011-08-25 15:44:49 +02:00
Corvus Corax
1d797bf004 Fixed error introduced by merge 2011-08-25 15:40:45 +02:00
Corvus Corax
4bd72923e5 Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS 
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/GTOP_BIN.c
	flight/Modules/GPS/NMEA.c
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-25 15:33:23 +02:00
Corvus Corax
54ecf233f3 Modules/PS: typo fix 2011-08-25 15:13:50 +02:00
Corvus Corax
7e396efbbf Modules/GPS: Assert buffer creation 2011-08-25 15:11:29 +02:00
Corvus Corax
dfdea16065 Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers 2011-08-25 14:46:30 +02:00
Corvus Corax
697ac6067e OP-567 Modules/GPS: Block in PIOS_COM, not in TaskDelay - or we will miss updates! 2011-08-25 13:33:41 +02:00
Stacey Sheldon
edc0caf521 heap: set memory critical alarm on malloc failures 
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
 2011-08-21 23:14:32 -04:00
Corvus Corax
838149b53f GPS: homelocation init is optional, satellites must be initialized 2011-08-21 18:20:33 +02:00
James Cotton
b1c522def3 Merge remote-tracking branch 'origin/next' into ins 2011-08-21 01:34:40 -05:00
James Cotton
e1afc9a19a Merge branch 'next' into ins 
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-21 00:47:43 -05:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
Corvus Corax
1ad65e0718 Fixed include in sysstemmod. pios_config.h should not be included explicitly. 2011-08-20 15:04:00 +02:00
Corvus Corax
53d0732fc6 Enable GPS module as "optional module" in CooterControl 2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules) 2011-08-20 01:24:06 +02:00
Corvus Corax
b75890fcd4 Merge branch 'next' into CC_GPS 2011-08-19 21:34:38 +02:00
Corvus Corax
9bba1f7ae9 Posix: fix object initialization where necessary 2011-08-19 18:36:30 +02:00
James Cotton
ab7e57ad2b Initialize objects for guidance in the correct place. Init some objects in 
pios_board_posix since AHRSComms not around.
 2011-08-19 09:52:05 -05:00
James Cotton
482bec497b Revert "Fixed modules that didn't initialize used UAVObjects correctly" 
Modules should initialize their settings and the objects they source.  Not just
everything.

This reverts commit 9ad85e9b7b.
 2011-08-19 09:44:38 -05:00
Corvus Corax
9ad85e9b7b Fixed modules that didn't initialize used UAVObjects correctly 2011-08-19 13:20:15 +02:00
Corvus Corax
f86e53bf91 Merge branch 'OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk' into next 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
 2011-08-19 12:10:40 +02:00
Corvus Corax
6fe495c088 Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
 2011-08-17 08:30:32 +02:00
James Cotton
35eef66bfe OP-557: Add a UAVO access method to erase the entire flash chip. Normally not 
needed by users because if too much changes I change the FS magic and trigger a
wipe.

Possibly the erase should require a particular "magic" object id value to
execute?  This would make it harder to do manually through UAVOs though.
 2011-08-15 10:33:27 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
 2011-08-14 15:48:16 +01:00
James Cotton
a2b76adc33 Attitude: Do not start attitude estimation until accel data appears. This 
fixes the NaN when AttitudeSettings not available.
 2011-08-13 18:53:42 -05:00
James Cotton
784c7b2646 Merge branch 'next' into ins 2011-08-11 21:52:10 -05:00
James Cotton
ec4e23aff9 Camera Stabilization: Bound outputs to [-1,1] although this should be redundant 
with checks in actuator.
 2011-08-11 14:34:38 -05:00
James Cotton
bbe3c1533a Merge branch 'next' into camera_stabilization 2011-08-10 21:57:45 -05:00
James Cotton
ab288e95ab Stabilization: Small patch so that by default the integral is zeroed while 
throttle is low (good for quads) but can be disabled (good for planes and also
testing helis).
 2011-08-10 03:51:46 -05:00
James Cotton
f23eaa8273 Make the Actuator pull from the CameraDesired fields 2011-08-09 21:47:42 -05:00
James Cotton
f11aa80444 CameraStabilization: Make the CameraStabilization module put the desired 
position into another object (will help with configuration).
 2011-08-09 20:45:38 -05:00
James Cotton
c4e272b9ad Merge branch 'next' into camera_stabilization 2011-08-09 20:16:45 -05:00
James Cotton
ec2121bca8 Attitude: Keep first element of quaternion positive 2011-08-08 21:16:04 -05:00
James Cotton
0bba13a0e9 Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/INS/pios_board.c
	flight/Modules/Altitude/altitude.c
	flight/PiOS/Boards/STM3210E_INS.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_BL_sections.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_BL.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_NB.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_memory.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-06 17:25:56 -05:00
James Cotton
fd86c25b49 Make sure OP compiles with new object init structure. 2011-08-04 15:01:54 -05:00
James Cotton
a592e7d398 ManualControlSettings must be also initialized in pios_board.c 2011-08-04 07:47:50 -05:00
Stacey Sheldon
90b2625deb rcvractivity: Add tracking of Rx channel activity 2011-08-02 01:27:37 -04:00
Stacey Sheldon
06cdeb7b61 rcvr: support multiple simultaneous receivers 
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
 2011-08-02 01:22:04 -04:00
James Cotton
cb9c6dfb5e Change the sequencing of telemetry starting to make sure all the objects that 
were registered in an initialize and then enumerated by telemetry
 2011-07-30 11:31:45 +09:00
James Cotton
ae67c51632 Register some missing objects with their modules 2011-07-30 11:28:21 +09:00
James Cotton
2e5a36a4db Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 10:55:16 +09:00
James Cotton
96c2d24253 Merge branch 'next' into camera_stabilization 
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	flight/Modules/Actuator/actuator.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
	flight/Modules/System/systemmod.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/stabilizationdesired.xml
 2011-07-30 10:06:10 +09:00
James Cotton
333ab645ec Dos2unix manualcontrol.c to facilitate merging 2011-07-30 09:55:02 +09:00
Stacey Sheldon
c2fb0d8b43 com: allow run-time allocation of buffers 2011-07-29 15:33:14 -04:00
Stacey Sheldon
5f8760a55c com: Move buffering out of USART/HID layer and into COM layer 
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.

Bytes are now pushed directly from the usart layer into the
com layer without any buffering.  The com layer performs all
of the buffering.

A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.

Misc related changes:
 - Remove obsolete .handler field from irq configs
 - Adapt all users of PIOS_COM_* functions to new API
 - Fixup callers of PIOS_USB_HID_Init()
 2011-07-27 19:45:38 -04:00
Stacey Sheldon
6580462916 rcvr: specify drivers for groups of channels 
Each channel was previously tracking a separate driver.
Now, channels are grouped within a channel group to save
RAM used for tracking and to better reflect how channels
are actually mapped.
 2011-07-14 23:22:42 -04:00
Mathieu Rondonneau
612a439199 OP-423: simplify the MODULE_INITCALL macro and remove the ordering loops 2011-07-12 20:44:32 -07:00
James Cotton
0aec3b592c Changing stabilization so that the PIDs are zeroed when not armed, but NOT when 
the throttle is < 0.  This will make things like axis-lock work while armed
without throttle.  HOWEVER don't hold your stick in the arming position for a
long time or you can wind up the integrals now.
 2011-07-12 14:35:32 -05:00
James Cotton
2c7cfe435f Somehow this task runs quite a few times at the beginning so dT was going to 
zero and making the attitude get NaN.  Wrote recovery code for that condition
(should never occur) and also force minimum dT to 1 ms (also shouldn't occur)
 2011-07-12 14:18:19 -05:00
James Cotton
53ca934b2b Merge branch 'heli_stabilization' 
Conflicts:
	flight/CopterControl/System/inc/pios_config.h
	flight/Modules/Attitude/attitude.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
 2011-07-12 13:28:20 -05:00
Mathieu Rondonneau
d38f6167e3 OP-423: 
Also reduce heap has it does not fit in SRAM anymore (not with current compiler).
(that's ok since if there is more space available, it will be reclaimed).

Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint

Conflicts:
	flight/CopterControl/System/inc/pios_config.h
	flight/Modules/ManualControl/manualcontrol.c
 2011-07-08 06:29:34 -07:00
James Cotton
2d995dc2f7 OP-539: Don't call the gyro setting callback during init because it clears the 
gyro bias estimation.
 2011-07-05 22:27:03 -05:00
Mathieu Rondonneau
9b9b5a1367 OP-423: remove ';' at the end of macro 2011-07-05 19:44:54 -07:00
Stacey Sheldon
740b5f1584 rcvr: convert PWM, PPM, SBUS and Spektrum to use PIOS_RCVR 
All receivers now fall under the same driver API provided
by pios_rcvr.c.

This is part of a larger sequence of commits that will
switch the receiver selection over to boot time dynamic
configuration via UAVObjects.
 2011-07-05 22:03:25 -04:00
James Cotton
ad8876c62a OP-193: Weak leveling variant on rate mode. Slowly will return to level. 2011-07-04 20:44:55 -05:00
James Cotton
46ae7eb17b Merge remote-tracking branch 'origin/bugfix-ground' into heli_stabilization 2011-06-30 19:40:22 -05:00
James Cotton
39e646ae1d Make the rates all work properly in axis lock 2011-06-30 19:38:52 -05:00
zedamota
567e3ffcad OP-542 Board resets with new Uploader 
IAP module now checks magic value
 2011-06-30 12:17:27 +01:00
James Cotton
a7206361d2 Slightly different way to respond to sticks in axis lock that is much more 
responsive and avoids overshoot.
 2011-06-26 21:59:54 -05:00
Mathieu Rondonneau
6683ce8570 OP-423: Make it more obvious that MODULE_TASKCREATE_ALL and MODULE_INITIALIZE_ALL are macro (for now): 
- remove the ;
  - also encapsulate the macro by {} in his own scope.
 2011-06-25 11:40:01 -07:00
James Cotton
4c0245281d Now we store the gyro bias avoid quashing the initialization correction. 2011-06-25 12:32:06 -05:00
Mathieu Rondonneau
de55c56427 OP-423: Change capital on macro to be uppercase for consistency. 2011-06-24 22:03:03 -07:00
James Cotton
dedbcbfceb Correct nasty bug on range checking for max rate and use the axis lock rate 
desired when in that mode.
 2011-06-24 11:30:28 -05:00
James Cotton
e6ad21d881 Make gyro bias in deg/s * 100 to calibrate more precisely. 2011-06-24 10:51:07 -05:00
James Cotton
038f955cb1 OP-410 OP-333: Axis lock (heading hold) implemented 2011-06-24 10:38:26 -05:00
James Cotton
ab7ff56d96 Compute initial gyro bias while calibrating to speed up convergence 2011-06-24 10:38:26 -05:00
James Cotton
c0eff41dc6 OP-410 OP-333: Created an Axis-lock setting for stabilization 2011-06-24 10:38:26 -05:00
James Cotton
0a4bbcc12e Added a field for initial gyro bias to speed up initialization. 2011-06-24 10:38:26 -05:00
James Cotton
28501842c3 Expose the rate D term which in simulations seems to help damp oscillations for 
high RateKp terms.  However it might be sensitive to gyro noise (vibrations).
In addition it is mathematically similar to lead shapign so probably only use
one or the other.
 2011-06-24 10:38:25 -05:00
James Cotton
a09642675c Tweak the integral calculation so it is scaled in ms internally. This avoids a 
loss of precision on the accumulation.
 2011-06-24 10:38:25 -05:00
James Cotton
373689207a Add a 1-tap IIR filter into the gyros in the feedback path. This will make the 
stabilization output a bit more resilient to the high frequency noise from
gyros.  However this value shouldn't be too high as it will increase the phase
delay of the feedback loop and decrease stability.  Default is 5 ms.

Note: this resests the stabilizationsettings object.  Sorry guys.
 2011-06-24 10:38:25 -05:00
Mathieu Rondonneau
dcd2774103 OP-423 Fix some comment from code review: 
- update example module
- use module init macro for POSIX and WIN to make code cleaner.
 2011-06-24 06:59:51 -07:00
Corvus Corax
f52f6d30c6 VTalk (flight): Buffers allocated dynamically with size calculated by UAVObjGenerator. Support for tx packet sizes < object size.i 2011-06-24 02:08:20 +02:00
James Cotton
f6312c7798 OP-410 OP-333: Created an Axis-lock setting for stabilization 2011-06-23 14:51:18 -05:00
James Cotton
9aba787b02 OP-193: Check for instance read success was backwards 2011-06-23 03:01:37 -05:00
James Cotton
368d5b649a OP-193: Output mixer should read from up to 6 accessory channels (may add more 
in future).
 2011-06-23 01:47:55 -05:00
James Cotton
493fcaef2a OP-193 OP-511: Add settings to scale the camera input output range 2011-06-23 00:47:27 -05:00
Mathieu Rondonneau
0ff5e9a46f Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint 2011-06-21 22:02:13 -07:00
James Cotton
8976d22fad Merge remote-tracking branch 'origin/OP-159_os_sbus' 2011-06-21 17:51:22 -05:00
Mathieu Rondonneau
fc1e3f574c OP-423: Split task create and module init in order to postpone task creation once the full heap is available. 
Also implement some ordering (quite ugly still) in the module init and task creation order so we can decide which module to start/init first
and which module to start/init last.
This will be replaced/adapter with the uavobject list later (once it's implemented).
reserving some space for module init and task create parameters to customize module/task creation (this will be usefull once we get the list and customization from customer).

Changes have been made for OP and CC. Tested comped with CC,OP, sim_posix.
Only ran on bench with CC for couple of minutes (code increase expected but no dropping of stack which is good).

This gives task creation at the time wherethe all heap is available.
 2011-06-19 22:35:40 -07:00
James Cotton
17fa227d1f Fixed typo, thanks Os 2011-06-19 16:51:54 -05:00
Mathieu Rondonneau
5e3e7cc4e3 OP-423 Fix issue with init not properly started in the right order endup up object thinking other where not init. 2011-06-18 17:28:37 -07:00
James Cotton
5044ea36de Start initializing objects in the modules that consume them. Shouldn't affect 
OP yet but not tested.
 2011-06-18 14:20:51 -05:00
Mathieu Rondonneau
b67a38661e OP-423: merge master into that branch, resolve conflicts and test with CC and bl_CC 
heap reamining is low (about 500) but stacks can be ajusted (specially the 200 bytes from system) to give the level close to 1Ko if needed.

Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint

Conflicts:
	flight/CopterControl/System/inc/FreeRTOSConfig.h
	flight/CopterControl/System/inc/pios_config.h
 2011-06-17 19:04:09 -07:00
James Cotton
9720a8444f Make a few things optional if they are mostly for diagnostics to keep memory 
down
 2011-06-17 21:00:21 -05:00
Mathieu Rondonneau
65cf467ca4 OP-423: move the module initialize funtion into a specific section for OP and CC. 
- create linker section for those <module>Initialize()
- later this list will incorporate parameters as well. (this probably will be more a OP feature to swap/remove/delete module on the fly.
- this is not done at compile time anymore by Makefile.
- this will allow us to have control on the module start at run-time (not implemented but build the ground for it).
- this simplify the startup (Part of code re-org).
- this change does not affect sim_posix and win32 (since they don't need that)
- ensure it's compiling for PiOS.posix
- port to PiOS.win32 but not tested (not compiled)
- tested on CC
- compile on OP.
- this free ~200 bytes.
- current avalable bytes (is we keep the same remaining bytes on the stack than before) is easily passed the 1.2Ko mark on CC with new gcc (4.5.2)
- this does not include init-reorg for each module (I still think more can be freed)
 2011-06-16 22:13:19 -07:00
Corvus Corax
926246b402 UAVTalk: Make UAVTalk object oriented, allowing multiple UAVTalk instances 2011-06-16 16:35:37 +02:00
Oleg Semyonov
d8201ec45b sbus: provide a stub based on Spektrum driver (for CC only) 2011-06-15 22:35:21 +03:00
James Cotton
7d7d03cfd0 OP-193 OP-511: Basic code for camera stabilization. Currently tune range with 
the servo endpoints and neutral.
 2011-06-15 11:18:29 -05:00
Mathieu Rondonneau
7598e898fa OP-423 Step-1: split system stack and implement water mark for IRQstack: 
- use IRQStack for ISRs (at begening of SRAM) (let's call it the irq stack)
- use end of heap for stack needed during initialization (let's call it the init stack).
- the systemStats in GCS indicate the remaining bytes in the IRQ stack (this is realy usefull to monitor our (nested) IRQs.

This is the base ground to provide as much memory as possible available at task creation time.

Next step is to re-organize the initialization in order to move all the init out of the thread's stacks onto the init stack.
This will provide as much memory as possible available at task creation time.
Basically the stack during initialization will be destroyed once the scheduler starts and dynamic alloc are made (since the init stack is at the end of the heap). We will need to make sure we don't clobber the heap during initialization otherwise this will lead to stack corruption.
 2011-06-12 20:23:00 -07:00
James Cotton
bdc9094975 OP-493 OP-505 OP-511: Make up to 6 accessory channels so some can go from 
ManualCommand to a camera module and some could go from that camera module to
output (i.e. mixing of inputs to pan tilt with stabilization)
 2011-06-06 10:56:31 -05:00
James Cotton
1ecd244aff OP-493 OP-505 OP-511: Fixed bug with the direct mapping where it looked at throttle curve 
source instead of directly bypassing
 2011-06-06 10:53:55 -05:00
James Cotton
6c6906d61e OP-493: Switch to using Accessory0:2 to match the InstId 2011-06-05 15:38:58 -05:00
James Cotton
99b3a629a8 OP-493: Force three AccessoryDesired objects to always exist. Routing to 
Mixing channel now works.  However Accessory desired instances do not show up
in GCS.
 2011-06-05 15:38:58 -05:00
James Cotton
a1336e4d03 OP-493: Make sure accessory desired is not a single instance object 2011-06-05 15:38:57 -05:00
James Cotton
8ebd6a83d6 OP-493: Add support to bypass the mixer and route accessory data straight to 
outputs.  Warning: This has no failsafes like arming.  We should discuss if
this is appropriate.

In addition accessory objects can be routed throught the mixer for collective
or flaperon.
 2011-06-05 15:38:57 -05:00
James Cotton
a1d60cb77d OP-493: Use multiple instances when using multiple accessory channels 2011-06-05 15:38:57 -05:00
James Cotton
1365542103 OP-493: Populate the Accessory Desired from TX 2011-06-05 15:38:57 -05:00
James Cotton
624baeda5c Merge branch 'OP-423_Mathieu_GetSet_Uavobjects' into bugfix-flight 2011-06-05 09:48:22 -05:00
Mathieu Rondonneau
7b8d09371b fixing minor compiler error/warnings when compiling OP with DEBUG=NO 2011-06-03 21:47:43 -07:00
Mathieu Rondonneau
31a06a5ae7 OP-423 add set/get uavobjects functions to access objects fields separately. 2011-06-02 21:18:34 -07:00
Stacey Sheldon
ac0eb3a5c7 Merge remote branch 'origin/stac_build-opf-image' 2011-05-26 21:29:53 -04:00
James Cotton
66b85acebd Merge branch 'bugfix-flight' 2011-05-26 20:07:58 -05:00
James Cotton
d4a0f55cb7 Altitude.c: Indentation 2011-05-26 14:06:47 -05:00
James Cotton
6e186bab35 Merge branch 'bugfix-flight' into OP-378_James_INS 2011-05-26 12:19:35 -05:00
Oleg Semyonov
36d2a467e0 manualcontrol: fix copy/paste error 2011-05-26 00:16:36 +03:00
Stacey Sheldon
96827eecff build: Make all flight sw use pios_board_info_blob 
Now that every bootloader build has a board info blob,
make all fw and bl images use it.

The following MACROS are removed:
  BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION,
  START_OF_USER_CODE, HW_TYPE

These values are now ONLY available from the bootloader
flash via the pios_board_info_blob symbol.  These values
must not be #defined or otherwise hard-coded into the
firmware in any way.  The bootloader flash is the only
valid source for this information.

NOTE: To ensure that we have an upgrade path from an
      old bootloader (without board_info_blob) to a
      new bootloader (with board_info_blob), it is
      essential that the bu_* targets do not depend
      on (or validate) the board_info_blob being present
      in the bootloader flash.
 2011-05-24 00:58:10 -04:00
dankers
5f32803763 Changed accelKp = 1; in 3C filter when calibrating bias when arming. Increase default yaw by 0.005 2011-05-17 04:15:28 +10:00
dankers
71d582495e On arm bias calibration terms now matches boot calibration terms 2011-05-16 00:16:19 +10:00
James Cotton
b01e897e36 Merge branch 'OP-488_NeverHaltWhileArmed_James' 2011-05-14 17:21:05 -05:00
dankers
84e09031a7 Faster attitude calc, be much more aggressive with working out bias. 
Change AccelkP to 0.05 to give accels more influence, just balacing out the 3C filter.

Change stab setting to be a better default fopr most Quads.
 2011-05-15 05:58:58 +10:00
James Cotton
dbf8a77a94 Now there are other attitude settings (like rotation angle) make sure these are 
loaded right away at power up
 2011-05-13 07:24:44 -05:00
James Cotton
3d5244c4b8 Fix small typo THRSHOLD to THRESHOLD in gps.c 2011-05-12 18:57:16 -05:00
Corvus Corax
bce51d4258 OP-435 Optionally allow building of GPS without support for GPSSatellites and GPSTime UAVObjects to save memory 2011-05-12 21:00:59 +02:00
James Cotton
338d363289 When a channel is disabled in the mixer force the channel to have a 0 us pulse 
duration.  The default before was neutral in failsafe.
 2011-05-11 20:09:28 -05:00
James Cotton
5d28276c49 Reshuffle memory allocation on CC after FlightStatus object introduced 2011-05-11 17:35:52 -05:00
James Cotton
fdd591b700 OP-488: If the FirmwareIAP receives a halt signal but system is not disarmed 
abort the halt.
 2011-05-10 14:40:21 -05:00
James Cotton
163d41fb60 OP-466: Make the test output panel work when there is not a valid mixer 
configured.  However unlike previous patch keeps alarms showing so you will be
unable to arm normally.
 2011-05-10 02:43:55 -05:00
James Cotton
808e3c8ea2 Fix bug I made where guidance didn't look at new flight status object 2011-05-09 11:37:06 -05:00
James Cotton
4ec0263dfc OP-476: If AttitudeSettings.ZeroDuringArming is true, then while arming (1 
second) it will speed up the estimate of gyro bias.
 2011-05-07 15:29:21 -05:00
James Cotton
8e06eb3162 Get the "IDLE_NO_LOAD" level closer for CC with optimizations on, but it would 
be great if someone actually calibrated this for me!
 2011-05-07 15:07:14 -05:00
James Cotton
10e55c25bc OP-475: More changes to get the FlightStatus object to work for Armed and 
FlightMode
 2011-05-07 15:06:04 -05:00
James Cotton
80c839d5bb OP-475: Starting to use the new FlightStatus object 2011-05-07 13:17:21 -05:00
James Cotton
e2819c6815 Restructure the ManualControlCommand code to be much more readable. Also 
facilitates the new FlightMode object.
 2011-05-07 12:43:27 -05:00
James Cotton
d1fb254a41 Merge branch 'master' into bugfix-flight 2011-05-07 06:56:54 -05:00
James Cotton
fef1e2dc2e Merge remote-tracking branch 'origin/OP-174_Sambas_BaroAlt_to_ETOSD' 2011-05-07 04:41:13 -05:00
Corvus Corax
5f749dda7e Modules/ManualControl: bugfix GCS Control was broken due to connection state and arming being checked outside of the "object_writable()? {}" if clause 2011-05-06 01:26:34 +02:00
James Cotton
7e418866be Update the AttitudeSetting object to make the board rotation more human 
readable and update the GCS fields appropriately.
 2011-05-05 13:04:56 -05:00
James Cotton
dd36192e37 Merge branch 'bugfix-flight' 2011-05-05 00:36:55 -05:00
James Cotton
93d8449814 OP-474: When throttle < 0 and "spin while armed" mode enabled don't take into 
account stabilization or stick - stay at neutral
 2011-05-05 00:32:15 -05:00
James Cotton
05684e966b OP-470: Make arm/disarm threshold 50% instead of 90% 2011-05-04 22:53:00 -05:00
James Cotton
401a989c63 OP-474: Add option to ActuatorSettings to allow people to request their propellers always spin an neutral when armed (I don't recommend this). 2011-05-03 00:08:39 -05:00
James Cotton
9daca1ac41 OP-469: Wasn't paying attention and missed a line 2011-05-02 22:22:57 -05:00
Corvus Corax
8d8144f233 OP-441 Prevent double alarm set ( setFailsafe() already sets alarm to CRITICAL ) 2011-05-02 18:00:12 +02:00
James Cotton
9afedc0139 OP-469: Fix a bug I wrote where MaximumRate instead of ManualRate was used to 
scale sticks in rate mode.
 2011-05-02 04:33:32 -05:00
James Cotton
d9221fac06 Merge remote-tracking branch 'origin/OP-452_InputConfiguration' 2011-05-02 03:40:59 -05:00
David Carlson
341dbd7ad9 Change blink rate to Hz rather than 1/2 Hz. As per comments in review OPReview-18. 2011-05-02 00:50:42 -07:00
David Buzz Carlson
edd5ad8a78 Update Stat LED blink rate when armed to 5 Hz from its current 1 Hz. This allows a more drastic change in LED behavior to highlight that the aircraft WILL NOW CUT YOUR FINGER OFF IF YOU DON'T RESPECT IT!! 2011-05-02 00:50:42 -07:00
James Cotton
62e3d35a97 OP-452 Read the channel times even if a bad mixer is configured 2011-04-29 17:57:04 -05:00
Sambas
2413fd451f OP-174 ET OSD: barometric altitude works now, units must be set metric with E-Logger 2011-04-29 19:08:28 +03:00
Corvus Corax
8c7f3e2720 OP-435 #ifdef covered one command too many - bugfix 2011-04-25 18:37:28 +02:00
Corvus Corax
eb9ccc2f9b OP-383 Review 11 : Removed commented out unused variables as directed by review 2011-04-25 16:36:23 +02:00
Corvus Corax
cdb6b65e64 Merge branch 'master' into OP-383_Edouard_CPUSerial_in_FirmwareIAP 2011-04-25 02:36:44 +02:00
Corvus Corax
5d952f81e3 PIOS: BL_HELPER: refactored function names 2011-04-23 21:11:17 +02:00
Corvus Corax
150464344d BL_HELPER: call CRC_Ini() from within CRC check function 2011-04-23 20:55:21 +02:00
Corvus Corax
357bc369db PIOS: Bootloader Helper functions should sit in HAL, not duplicated in every single architecture. 2011-04-23 19:40:41 +02:00
Corvus Corax
192e31986d PIOS, Modules/FirmwareIAP: Use correct HAL for CPU serial 2011-04-23 18:30:32 +02:00
Corvus Corax
2bf7ea2271 Modules/GPS: Make code to deal with home location optional to allow a sleeker GPS module for RAM challenged systems 2011-04-23 16:49:07 +02:00
elafargue
e4112e210f Reduce size of FirmwareIAPObj to 40 bytes: only takes the 40 first bytes of the firmware description, ignores the rest. Makes the FWIAP UAVObject more decent size-wise, and does not break USB TX anymore. 2011-04-19 20:45:49 +02:00
elafargue
45e92d654e Implemented support for the Unique STM32 CPU serial number in the firmwareIAP object. 2011-04-19 00:31:20 +02:00
peabody124
3afdc7e41c CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS 
config plugin updates.  Has not been tested in flight yet although seems
sensible so please be careful when using this code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3166 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-15 06:37:16 +00:00
pip
33d9d31082 Modified manual control input value checking to determine RC connection state - was previously checking only the throttle channel for semi-valid input range, it now checks the Throttle, Roll, Yaw and Pitch channels for full-valid values (manual value is within min and max values). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3146 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-10 14:00:46 +00:00
corvus
da76192e47 Modules/Guidance: Bugfix in Position-Hold code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3112 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-31 20:08:14 +00:00
peabody124
a57c289b3a CC-24: Support mounting CC at any angle by applying a rotation. Now need to 
rotate sensors to make sure stabilization behaves well so don't use till then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3100 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-29 02:15:57 +00:00
peabody124
48c20d37a9 OP-349 CC-32: Added a Completed operation that is returned after successful 
save or load

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3093 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-03-28 19:16:50 +00:00