1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

5178 Commits

Author SHA1 Message Date
Stacey Sheldon
63285ea451 bu: remove LED support from bootloader updaters
Bootloader updaters were all broken due to recent
changes in LED configuration handling.  Removing
LED support from the BU loads allows them to build
again, but they provide no feedback about when they're
finished writing flash.
2012-04-22 18:42:58 -05:00
Stacey Sheldon
2ec197298b gpio: stop enabling pull-ups on all GPIOs in bootloader
The bootloader has been enabling pull-ups on all GPIO
pins during early init.  These pull-ups are disabled
immediately before jumping to the firmware.  This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
2012-04-22 18:42:53 -05:00
Stacey Sheldon
14cc9ef57c ppm: adjust min frame pulse width for 8ch x 18ms frames
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.

With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels.  Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.

Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
2012-04-22 18:42:45 -05:00
James Cotton
1b07935201 Bump overo revision to match these UAVObjects 2012-04-16 09:00:22 -05:00
James Cotton
ad074aee4b Fix nasty bug in guidance where I missed some breaks 2012-04-16 08:59:25 -05:00
James Cotton
a7ba6d96c1 Allow guidance to run purely off raw GPS data 2012-04-15 16:23:34 -05:00
James Cotton
050c756d54 Merge branch 'revolution_path' into testing 2012-04-15 12:34:31 -05:00
James Cotton
4928cbba44 Merge branch 'sim' into testing 2012-04-15 12:34:27 -05:00
James Cotton
59da9deffb Merge remote-tracking branch 'revo/D-Lite/ubx-parser' into sim 2012-04-15 12:33:54 -05:00
James Cotton
6a094ac326 Increase stack for the path planner 2012-04-15 12:31:50 -05:00
Corvus Corax
88f7567247 change to GPS: do not update UAVObject more than 1ce per cycle 2012-04-15 19:17:03 +02:00
James Cotton
85852df00b Make simulation produce data asynchronously for testing and add random accel
bias
2012-04-15 11:51:42 -05:00
James Cotton
08fd08deb8 Fix some compiler warnings in guidance code 2012-04-15 11:51:26 -05:00
James Cotton
1559eeb2e1 Use GPSVelocity updates when they are available instead of timing based on
GPSPosition
2012-04-15 11:50:56 -05:00
James Cotton
6e215bd029 Updating INS Pos/Vel variance includes the vertical velocity 2012-04-15 11:50:11 -05:00
James Cotton
b71e9fc9dc Create simulated OveroSync module which simply drops updates to log file 2012-04-14 22:01:33 -05:00
unknown
0b7538c3fe Constants changed to float for better portability. 2012-04-15 01:28:31 +02:00
James Cotton
9a2e0b071c Revert "Allow simulated quadcopter to include GyroBias in the artificial sensor data."
This reverts commit 212a10bcd4.
2012-04-14 17:20:01 -05:00
James Cotton
212a10bcd4 Allow simulated quadcopter to include GyroBias in the artificial sensor data. 2012-04-14 14:52:56 -05:00
James Cotton
af02eb6517 Merge branch 'sim' into testing
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-04-14 14:40:43 -05:00
James Cotton
267e9fa87c Merge branch 'revolution' into testing 2012-04-14 14:40:11 -05:00
James Cotton
a86e75bc99 Merge branch 'revolution' into sim 2012-04-14 14:12:03 -05:00
James Cotton
deb3336729 Make sure for revolution all the GPS objects are always initialized even if
there is no GPS port.  Otherwise connecting to relevant queues will fail.
2012-04-14 14:02:20 -05:00
James Cotton
b7c3b1fdd1 Make the simulation provide GPSVelocity object since this is critical for EKF
now
2012-04-14 14:01:42 -05:00
James Cotton
ce6def870b Add feedforward component to guidance 2012-04-14 13:38:10 -05:00
James Cotton
be21ec441e Add ability to run guidance based on raw GPS velocity instead 2012-04-14 13:34:30 -05:00
James Cotton
1a98a46606 Merge branch 'revolution_ubx' into sim 2012-04-14 12:10:23 -05:00
James Cotton
5d160860a3 Fix from Corvus for gyro bias from EKF 2012-04-14 12:09:12 -05:00
James Cotton
3e2feb64cf Fix bug limiting maximum velocity desired 2012-04-14 10:49:54 -05:00
James Cotton
b0ef456ccb Kickstart MPU6000 if there is no data 2012-04-13 20:29:41 -05:00
James Cotton
a0d1b00ade Cover an edge condition for the MPU6000 IRQ not firing 2012-04-13 19:37:30 -05:00
James Cotton
a1351fcdbe Make the path velocity come from the waypoint. 2012-04-10 02:56:10 -05:00
James Cotton
a42d756b3e Add path navigation mode to the path planner module. I don't like how this is
done because the mode is in the settings so can't be command from path planner.
I.e. it would be nice to be able to say do these paths then go to position hold
mode.
2012-04-10 02:51:50 -05:00
James Cotton
dfa18eaef1 Deal with the case where path start and endpoints are the same to avoid NAN. 2012-04-10 02:49:19 -05:00
James Cotton
1aec5b8deb Add altitude control to the path navigation 2012-04-10 01:59:26 -05:00
James Cotton
26b73e3c8b Add path navigation mode to guidance. Works well in simulation. 2012-04-10 01:48:03 -05:00
James Cotton
136bbe3814 Update the EKF code to use the GPSVelocity 2012-04-09 19:03:21 -05:00
James Cotton
dbcb47e249 Merge branch 'D-Lite/ubx-parser' into revolution_ubx 2012-04-09 17:34:34 -05:00
Werner Backes
4ede7a8af6 Experimental u-blox binary data format parser. See "u-blox 6
Receiver Description" for reference. Currently supports NAV-VELNED
message only and populates it to the GPSVelocity UAVObject.
2012-04-09 23:14:34 +02:00
Werner Backes
422944ce29 Experimental extension to the GPS stream parser to extract u-blox
binary data format. See "u-blox 6 Receiver Description" for
reference. GPS data stream may carry mixed NMEA and UBX data.
2012-04-09 23:12:24 +02:00
Werner Backes
56108b5381 Introduced GPSVelocity UAVObject 2012-04-09 22:59:38 +02:00
James Cotton
414e62f14e Revert "Disable baro updates into INSGPS for now. Seems to cause issues."
This reverts commit 04591309770679e7b01c53a6cb54cac1c043f8b6.
2012-04-07 00:58:36 -05:00
James Cotton
fcb9193d25 Disable baro updates into INSGPS for now. Seems to cause issues. 2012-04-07 00:58:36 -05:00
James Cotton
aa6c8a451d Shrink some stack sizes 2012-04-07 00:58:36 -05:00
James Cotton
81fcfd45c4 Some work on the code to initialize the INSGPS and allow setting the variance
of the baro
2012-04-07 00:37:42 -05:00
James Cotton
345b6578b1 Fix a possible race condition for complimentary filter on L3GD20 attitude
estimation where the accel queue wouldn't immediately have data available.
Added 1 ms timeout on queue.
2012-04-06 13:59:12 -05:00
James Cotton
e60c70251f Slow down update rate for the altitude hold smoothed EKF 2012-04-06 13:58:46 -05:00
James Cotton
6c004678d5 Need a really big telemetry queue size on revo for object manager not to choke.
Probably should slow down how quickly AltHoldSmoothed is set.
2012-04-06 13:22:30 -05:00
James Cotton
ea13536da0 Take quidance settings from simulation and make the INSGPS pick up the GPS
noise from a setting.
2012-04-06 12:59:49 -05:00
James Cotton
3071f77d59 Add Baro offset to the simulation 2012-04-03 10:58:48 -05:00