Vladimir Zidar
5205d95a8c
LP-309 skip edge detection if not transitioning from fully ARMED/DISARMED state
2016-05-11 12:02:36 +02:00
Vladimir Zidar
633d8d4969
LP-309 Arming should be done at armingInputLevel edge (crossing ARMED_THRESHOLD) instead of level to avoid unwanted re-arming after timeout.
2016-05-10 23:18:57 +02:00
Lalanne Laurent
1d3569daba
Merged in alessiomorale/librepilot/LP-304_perf_counter_improvements (pull request #238 )
...
LP-304 performance counters improvements
2016-05-09 12:23:50 +02:00
Lalanne Laurent
c3f0d693b5
Merged in alessiomorale/librepilot/amorale/LP-150_slower_attittude_est_cc (pull request #239 )
...
LP-150 slower attittude estimation for CC/CC3D
2016-05-09 12:21:56 +02:00
Alessio Morale
4cbd4ea926
Merged in f5soh/librepilot/LP-233_OneShot42 (pull request #236 )
...
LP-233 Support OneShot42
2016-05-09 10:53:12 +02:00
Alessio Morale
e14e5febe2
LP-150 - prevent stab error conditions
2016-05-03 01:00:28 +02:00
Alessio Morale
6bd6ef5be1
LP-150 - Run attitude estimation at a configurable fraction of gyro sample rate for CC/CC3D
2016-05-03 01:00:06 +02:00
Alessio Morale
5156c0c911
LP-304 - Allow further info to be added to PERF_INIT_COUNTER for future feature support.
...
This may allow in future to extract the counters id list with grep to be handled by gcs or other custom tools
Proposed usage:
PERF_INIT_COUNTER(counterVariable, id, "MODULE NAME","COUNTER DESCRIPTION","UNIT OF MEASURE");
i.e.:
PERF_INIT_COUNTER(counterExecutionTime, 0xAC700001, "ACTUATOR", "Actuator update execution time", "uS");
2016-05-03 00:07:35 +02:00
Alessio Morale
1b254e4182
LP-304 - Prevent errors when dealing with variables used only for instrumentation
2016-05-03 00:07:10 +02:00
Alessio Morale
bf639b486d
LP-304 - declare counters as static
2016-05-03 00:06:24 +02:00
Alessio Morale
b00ac8a55a
Merged in mindnever/librepilot/LP-293-add-alarmstring-to-alarms-library (pull request #231 )
...
Lp 293 add alarmstring to alarms library
2016-05-02 22:42:46 +02:00
Laurent Lalanne
214ae849a2
LP-233 Add MultiShot 5 - 25µs pulses
2016-05-02 20:24:03 +02:00
Laurent Lalanne
2bda2e2901
LP-233 Simplify, same clock used for all OneShot modes
2016-05-02 20:24:03 +02:00
Laurent Lalanne
78be10ff28
LP-233 Multiply / factor instead of scale
2016-05-02 20:24:03 +02:00
Laurent Lalanne
49107e4007
LP-233 Increase Oneshot output resolution
2016-05-02 20:24:03 +02:00
Laurent Lalanne
32a6de6b79
LP-233 Support OneShot42
2016-05-02 20:24:03 +02:00
Laurent Lalanne
c9fff7e16e
LP-151 OPLink: Allow custom Device ID or auto generated.
2016-05-01 21:56:50 +02:00
Vladimir Zidar
6e2ec8aecc
LP-291 Minor cosmetic change - added missing break in msp_send_alarms().
2016-04-26 11:56:58 +02:00
Vladimir Zidar
2a668d0615
LP-291 Fixed alert severity translation to MSP alarm levels.
2016-04-26 11:54:47 +02:00
Corvus Corax
e1394febb0
LP-295 fixed file headers for all touched files
2016-04-25 18:45:35 +02:00
Corvus Corax
bf80ede401
LP-295: fixed comments and formatting
2016-04-25 18:12:31 +02:00
Corvus Corax
47d2746fba
LP-295: uncrustify
2016-04-25 17:37:06 +02:00
Vladimir Zidar
7925f115df
LP-291 fix coptercontrol build. Oplink uavos are not available there.
2016-04-25 15:15:03 +02:00
Vladimir Zidar
35ccc6a169
LP-291 removed unused msp_send_ident() function
2016-04-25 14:58:46 +02:00
Vladimir Zidar
8dbf9e7d31
LP-291 Changed noise floor level to -110 to be closer to real noise level instead of absolute -127
2016-04-25 13:28:10 +02:00
Vladimir Zidar
84886cbce4
LP-291 fixed typo &acc2 should be &acc3
2016-04-25 12:55:23 +02:00
Vladimir Zidar
1f0bf155ce
LP-293 make use of NELEMENTS() macro instead of defining own version NELEM()
2016-04-24 02:03:50 +02:00
Vladimir Zidar
33eb434862
LP-291 add missing includes. Uncrustification.
2016-04-24 01:50:41 +02:00
Vladimir Zidar
69a51956e8
LP-291 msp_send_comp_gps(): calculate distance and direction to home using PositionState and TakeOffLocation, same way it is done in GCS.
2016-04-24 01:49:09 +02:00
Vladimir Zidar
fec3924ee0
LP-291 msp_send_altitude(): use PositionState instead of BaroSensor and add VelocityState to provide climb rate
2016-04-24 01:46:13 +02:00
Vladimir Zidar
bb0f15024b
LP-291 msp_send_channels(): include Accessory3
2016-04-24 01:41:42 +02:00
Vladimir Zidar
5d72a9671c
LP-291 msp_send_analog(): Use OPLinkStatus.RSSI if applicable
2016-04-24 01:38:30 +02:00
Corvus Corax
5285689541
Merge branch 'next' into corvuscorax/OP-1900_fixedwingautotakeoff_rebaserc6
2016-04-23 02:08:13 +02:00
Vladimir Zidar
26d63ee7ac
LP-291 fixed @author tags
2016-04-22 22:53:16 +02:00
Vladimir Zidar
85fa65a514
LP-293 Fixed remaining buffer space calculation. Changed name of position variable to less misleading.
2016-04-22 22:47:25 +02:00
Vladimir Zidar
f04d44de30
LP-291 Added MSP support to all boards (revolution, revonano, revoproto, discoveryf4bare and coptercontrol)
2016-04-22 03:30:38 +02:00
Vladimir Zidar
365354ea74
LP-291 Changed AlarmString() arguments
2016-04-22 03:30:35 +02:00
Vladimir Zidar
1a870f0c0f
LP-291 Added proper float rounding before casting to uint8_t
2016-04-22 03:30:19 +02:00
Vladimir Zidar
d281d8ce0c
LP-291 Added MSP_SET_PID command.
2016-04-22 03:30:09 +02:00
Vladimir Zidar
db5807e54c
LP-291 Cleaned up flight modes and additional icons. Implemented MSP_PID message.
2016-04-22 03:29:38 +02:00
Vladimir Zidar
d8bdd8bfcf
LP-291 Added TaskInfo entry for UAVOMSPBridge task
2016-04-22 03:26:50 +02:00
Vladimir Zidar
6b5e43a57d
LP-291 Changed default baudrate to 115200
2016-04-22 03:26:47 +02:00
Vladimir Zidar
1e32ccb1d0
LP-291 Initial port
2016-04-22 03:26:41 +02:00
Vladimir Zidar
96ce3db02d
LP-293 Added LibrePilot to @author tag
2016-04-22 02:04:21 +02:00
Vladimir Zidar
72582d1100
LP-293 Added severity level parameter to AlarmString(). Reverted alarm sort order to natural severity levels (highest to lowest): ERROR, CRITICAL, WARNING, OK
2016-04-22 01:18:09 +02:00
Vladimir Zidar
8f937e0508
LP-293 Changed alarm strings to match GCS display
2016-04-22 01:17:59 +02:00
Vladimir Zidar
e513db4b4d
LP-293 Added state parameter to receive highest severity level.
2016-04-22 01:17:50 +02:00
Vladimir Zidar
91a9c19e1f
LP-293 Implemented AlarmString() function to return human readable SystemAlarms data
2016-04-22 01:16:37 +02:00
Lalanne Laurent
e6ada50587
Merged in alessiomorale/librepilot/amorale/LP-276_measurement_based_d_term (pull request #218 )
...
[LP-276] Support D Term calculation on measurement only
2016-04-14 11:44:39 +02:00
Alessio Morale
f83c9e2c73
[LP-276] some perf improvements (mainly for f1 targets)
...
(authored by Lalanne Laurent <f5soh@free.fr>)
2016-04-08 22:18:01 +02:00
Vladimir Zidar
30e7e1f4e6
LP-281 use correct operator
2016-04-07 01:00:42 +02:00
Philippe Renon
bde5648f51
Merged in mindnever/librepilot/LP-268-OPLink_add-tx-and-rx-packet-rates (pull request #210 )
...
Lp 268 oplink_add tx and rx packet rates
2016-04-04 21:28:25 +02:00
Philippe Renon
d916fde887
Merged in f5soh/librepilot/LP-273_Reset_Mag_Alarm (pull request #214 )
...
LP-273 Reinit Mag alarm while switching to Complementary
2016-04-04 21:26:38 +02:00
Alessio Morale
a513b2c675
[LP-276] Support D Term calculation on measurement only
2016-04-03 21:49:44 +02:00
Laurent Lalanne
b1747c58c2
LP-273 Reinit Mag alarm while switching to Complementary
2016-04-02 00:11:01 +02:00
Vladimir Zidar
8c1b008da1
LP-268 Uncrustified.
2016-03-28 16:03:16 +02:00
Vladimir Zidar
4159449021
LP-268 This adds TX and RX data rates to OPLinkStatus UAVO and fixes small issue in rfm22b driver with rx_seq not being updated.
2016-03-28 16:02:28 +02:00
Laurent Lalanne
3f344bde4d
LP-228 Treat Gimbal outputs only if CamStab module is enabled.
2016-03-16 15:58:38 +01:00
Lalanne Laurent
feee98b305
Merged in f5soh/librepilot/LP-206_AlwaysStabilizeWhenArmed_switch (pull request #190 )
...
LP-206 Add Always stabilized accessory switch
2016-03-12 20:34:00 +01:00
Laurent Lalanne
593cf7bc61
Typo PIOS_RFM22B_GetPairStats()
2016-03-12 17:56:05 +01:00
Laurent Lalanne
6735314852
Uncrustify all
2016-03-12 17:30:24 +01:00
Harold Hankins
315d9ee98d
LP-252 remove extra sendbuffer call
2016-03-10 16:33:12 -05:00
Harold Hankins
fd235d8aa5
LP-252 correct buffer handling
2016-03-10 16:33:12 -05:00
Harold Hankins
352d2c27f0
LP-252 allow compile without watchdog
2016-03-10 16:33:12 -05:00
Harold Hankins
aca8a4db13
LP-252 fix reuse of buffer expected to retain data between calls
2016-03-10 16:33:12 -05:00
Laurent Lalanne
406c381071
LP-206 Add Always stabilized accessory switch - Fix: Allow Accessory3 for arming
2016-03-07 18:26:10 +01:00
Alessio Morale
ffdd62721f
LP-238 - Move CPP stuffs within apps/boot-defs.mk. fix targets accordingly
2016-02-20 09:57:02 +01:00
Alessio Morale
9b45435928
Merged in alessiomorale/librepilot/amorale/LP-207_callback_optimizations (pull request #149 )
...
Amorale/lp 207_callback_optimizations
2016-02-19 20:20:25 +01:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Philippe Renon
f140dd4109
Merged in mindnever/librepilot/debugconsole_fix (pull request #171 )
...
This commit fixes debug console rx_buffer assertion.
2016-02-19 14:09:03 +01:00
Cliff Geerdes
ed0e879b7c
LP-212 extra parenthesis, throw compile error if local defines are already defined
2016-02-16 16:14:39 -05:00
Cliff Geerdes
a73b7720c5
LP-212 save time and space if PIOS_GPS_MINIMAL
2016-02-16 15:36:08 -05:00
Cliff Geerdes
fac0213987
LP-212 readable #ifs and dji compile for cc3d
2016-02-16 15:36:08 -05:00
Cliff Geerdes
2826cb5cd7
LP-212 forgot to lower camel case GpsTime
2016-02-16 15:36:08 -05:00
Cliff Geerdes
baeb379a82
LP-212 changes from code review
2016-02-16 15:34:59 -05:00
Cliff Geerdes
fad0e9f24c
LP-212 uncrustify and remove junk comments
2016-02-16 15:32:56 -05:00
Cliff Geerdes
2ae1f9c63d
LP-212 DJI GPSMag support
2016-02-16 15:23:36 -05:00
Lalanne Laurent
48a76dd139
Merged in TheOtherCliff/librepilot/theothercliff/LP-83_Bricking_of_Revo_and_Sparky2 (pull request #142 )
...
LP-83 Unbrick Revo and Sparky2
2016-02-16 19:13:57 +01:00
Lalanne Laurent
b3151602b2
Merged in TheOtherCliff/librepilot/theothercliff/LP-145_CC3D_GPS_issue (pull request #123 )
...
LP-145 CC3D GPS issue
2016-02-16 19:13:10 +01:00
Lalanne Laurent
2527cba04f
Merged in f5soh/librepilot/LP-221_Revo_sys_stack_size (pull request #167 )
...
LP-221 Update Revo system stack size same as RevoNano
2016-02-12 07:13:01 +01:00
Alessio Morale
54a4ac9672
LP-207 - Fix naming, fix style
2016-02-07 16:31:15 +01:00
Vladimir Zidar
b1aa5c1c59
Uncrustified
2016-02-03 23:13:19 +01:00
Vladimir Zidar
eff5ab377e
This commit fixes debug console rx_buffer assertion. Debug console is tx only, but PIOS_Board_configure_com() was not pepared to handle such case.
...
Additionally, debug console on flexi port was incorrectly using pios_usart_main_cfg.
2016-02-02 23:14:09 +01:00
Cliff Geerdes
dae9052686
finish renaming load_mag_settings to include hardware type
2016-02-02 09:39:53 -05:00
Cliff Geerdes
f4a088bcfa
change forward error gotos into breaks
2016-02-02 09:17:56 -05:00
Fredrik Arvidsson
b6a3a32ce4
This upgrades google test to 1.7.0 and fixes some issues in make files.
2016-01-31 22:04:59 +01:00
Fredrik Arvidsson
56bd378183
Merged in james-duley/librepilot/unit_tests (pull request #168 )
...
LP-223: Fix up unit tests
2016-01-30 10:09:19 +01:00
James Duley
010adebba9
LP-223: Fix up unit tests
...
The were missed when the flight makefiles were moved
2016-01-27 22:17:24 +00:00
Laurent Lalanne
09818d0603
LP-221 Update Revo system stack size same as RevoNano
2016-01-27 14:13:26 +01:00
Fredrik Arvidsson
9e53b35fdc
LP-104 LP-196 Signal quality implementation for Graupner HoTT. Uncrustification of flight code.
2016-01-25 00:42:54 +01:00
Fredrik Arvidsson
ffa671da78
LP-196 Adding signal quality calculation to Ex.Bus receiver module.
2016-01-25 00:23:31 +01:00
Fredrik Arvidsson
e17d809120
Merge branch 'next' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support
2016-01-24 21:11:35 +01:00
Lalanne Laurent
da884f5432
Merged in f5soh/librepilot/LP-214_Camera_tilt_compensation (pull request #158 )
...
LP-214 Camera tilt compensation
2016-01-24 17:56:59 +01:00
Lalanne Laurent
27afc79767
Merged in f5soh/librepilot/LP-205_Rate_trainer_wobble (pull request #148 )
...
LP-205 Rate trainer : add Attitude stabilization at max angle
2016-01-24 17:54:34 +01:00
Lalanne Laurent
c9c347300d
Merged in f5soh/librepilot/LP-209_OPLM_link_quality_lost_link (pull request #152 )
...
LP-209 Oplm link_quality still good with link lost
2016-01-24 17:52:06 +01:00
Laurent Lalanne
580ef50efb
LP-214 Calc changes
2016-01-24 16:35:40 +01:00
Laurent Lalanne
f20adf00f5
LP-214 Add Fpv Camera tilt compensation
2016-01-24 16:35:32 +01:00
Laurent Lalanne
cd94047619
LP-205 Rate trainer : add Attitude stabilizaton at max angle
2016-01-24 16:26:28 +01:00
Laurent Lalanne
a0d7af7f55
LP-215 Set correct failsafe values if PPM stream fails.
2016-01-24 16:15:15 +01:00
Laurent Lalanne
db83d1860e
LP-209 Update Rssi and LinkQuality values - Set Connected/Disconnected state in both sides - Add checkTimeOut()
2016-01-24 16:15:14 +01:00