Alessio Morale
6bd6ef5be1
LP-150 - Run attitude estimation at a configurable fraction of gyro sample rate for CC/CC3D
2016-05-03 01:00:06 +02:00
Cliff Geerdes
2ae1f9c63d
LP-212 DJI GPSMag support
2016-02-16 15:23:36 -05:00
Fredrik Arvidsson
02c981388a
Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09
...
# Conflicts:
# flight/targets/boards/coptercontrol/board_hw_defs.c
# flight/targets/boards/coptercontrol/firmware/pios_board.c
# flight/targets/boards/revolution/board_hw_defs.c
# flight/targets/boards/revolution/firmware/inc/pios_config.h
# flight/targets/boards/revolution/firmware/pios_board.c
# flight/targets/boards/revonano/firmware/inc/pios_config.h
# flight/targets/boards/revonano/firmware/pios_board.c
# shared/uavobjectdefinition/hwsettings.xml
# shared/uavobjectdefinition/manualcontrolsettings.xml
# shared/uavobjectdefinition/receiveractivity.xml
2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
3e920bc5bc
LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet.
2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
5273df263c
LP-104 Reverted stack size for receiver module after testing.
2015-12-20 21:11:15 +01:00
Fredrik Arvidsson
7a95050381
LP-104 Added missing code to receiver.c to detect receiver activity. This probably caused a crash on any activity of the HoTT receiver.
...
Added 40 bytes to the receiver stack.
Added options to receiver activity.xml uavo definition.
2015-12-20 13:36:45 +01:00
Fredrik Arvidsson
e6d4638201
LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port.
...
Still work in progress. Only supports CopterControl target and crashes on input :(
2015-12-20 11:08:15 +01:00
Laurent Lalanne
99975bf9b0
LP-92 Reduce Actuator stack size - Increase System stack size for diags
2015-08-14 10:59:53 +02:00
m_thread
9ba63ea124
LP-69 Added SRXL support to CopterControl targets.
2015-07-30 15:30:59 +02:00
a*morale
dd6c6054e9
Revert "OP-1810 FOC"
...
This reverts commit 92e50c2ead
2015-07-15 00:07:50 +02:00
abeck70
92e50c2ead
OP-1810 FOC
...
Squashed commit for clean commit as discussed in code review
Uncrustify
2015-05-13 17:19:51 +10:00
Alessio Morale
6d9bb8a287
OP-1857 - Enable PPM On Flexi Port
2015-04-25 20:21:56 +02:00
Alessio Morale
81b9d2e379
OP-1743 - Raise manualcontrol stack
2015-02-24 22:03:18 +01:00
Laurent Lalanne
f92eba93ef
OP-1601 Ubx only, more efficient to save Ram on CC/CC3D
2015-02-07 17:02:59 +01:00
Laurent Lalanne
58e70b2e3a
CC3D special firmware : Nmea GPS
2015-02-06 16:59:41 +01:00
Alessio Morale
5d074063d1
OP-1535 - Add board specific sensor update rate constant
2014-10-14 05:38:57 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
4389f767f3
uncrustify
2014-07-02 23:27:58 +02:00
Alessio Morale
1b823b7b92
Merge remote-tracking branch 'origin/Bertrand/OP-1308_Set_Same_Logic_To_Alarms' into next
...
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/StateEstimation/filtermag.c
flight/modules/System/systemmod.c
2014-06-26 20:31:27 +02:00
Alessio Morale
de5aed6864
OP-1227 Fix high CPU usage: Disable Instrumentation
2014-06-09 16:29:53 +02:00
Alessio Morale
8710ff4070
OP-1227 Fix high CPU usage: Some minor to Actuator module.
2014-06-08 22:39:16 +02:00
Alessio Morale
9db264a457
OP-1365 Flight code instrumentation API: Add CopterControl support
2014-06-07 00:47:06 +02:00
Bertrand Oresve
fd1b786868
Merge branch 'next'
...
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/Stabilization/stabilization.c
2014-05-08 21:36:54 +02:00
Corvus Corax
59bdab697a
OP-1309 some CPU and memory optimizations to get it to run on CC
2014-04-29 18:17:29 +02:00
Corvus Corax
599661ba18
OP-1309 UAVObject changes, GCS changes and Makefile changes needed for Stabi refactoring
2014-04-26 15:14:40 +02:00
Alessio Morale
6d1fabdd5f
OP-1294 declare controlHandler as const, add a new PIOS_EXCLUDE_ADVANCED_FEATURES that disables all nav features
2014-04-08 00:30:10 +02:00
Alessio Morale
b9d911c40f
OP-1294 eventdipatcher stack can be further reduced
2014-04-07 00:32:34 +02:00
Alessio Morale
499efdf168
OP-1294 adjust some stack sizes for CC
2014-04-06 19:19:48 +02:00
Alessio Morale
eed5c098ab
OP-1294 Allow to specify different stack sizes for rx and tx telemetry task.
2014-04-06 19:19:44 +02:00
Corvus Corax
be9f4b958d
OP-1216 remove commented out define as review requested
2014-03-08 22:12:46 +01:00
Corvus Corax
564a991222
adjusted Stabilization stack size to get rid of stack alarm
2014-03-02 19:11:49 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Alessio Morale
3ef980aa89
OP-1188 fix stack for coptercontrol
2014-01-22 00:01:58 +01:00
Alessio Morale
1f61676d0a
Merge branch 'amorale/OP-1152_stack_verification' into next
...
Conflicts:
flight/targets/boards/coptercontrol/firmware/inc/pios_config.h
2014-01-18 13:54:06 +01:00
Alessio Morale
3aa7a1d352
OP-1152 change stack size to accomodate recent changes in dispatcher, telemetry for former CC (hw rev 1)
...
+review OPReview
2014-01-05 23:13:06 +01:00
Les Newell
0afe6afd11
OP-984 Fixed insufficient stack for stabilization
2013-12-11 19:24:13 +00:00
Corvus Corax
9414f3513f
adapted telemetry stack sizes for flight firmware to include more space needed for logging feature
2013-11-17 22:39:39 +01:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Richard Flay (Hyper)
84e1a81f8b
OP-936: Moves the task monitor code out of the flight library and into PiOS.
...
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.
+review OPReview
2013-05-03 07:01:14 +09:30
Oleg Semyonov
45f456580f
Fix pios debug pin functions and defines (thanks to Mathieu for the patch)
2013-04-26 18:18:31 +03:00
Oleg Semyonov
f7f842687a
OP-899: rename System to firmware and move Makefile into it
2013-04-24 00:07:06 +03:00
