rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
6,601 Commits 5 Branches 8 Tags 266 MiB
6bfb2a5e45
Commit Graph

129 Commits

Author SHA1 Message Date
Stacey Sheldon
e2939dae2a revo usb: Add support for USB to Revo 2012-02-07 02:25:31 -05:00
Stacey Sheldon
3c1b1001f9 f4 usb: Allow USB descriptors to be const through ST APIs 2012-02-07 02:25:31 -05:00
Stacey Sheldon
56102013aa f4 usb: correct function prototypes in bsp template 
This file is not actually used but it should still be accurate.
 2012-02-07 02:25:31 -05:00
Stacey Sheldon
57f9f6e3d1 f4 usb: configure and build ST USB OTG and USB DEV libraries 2012-02-07 02:25:31 -05:00
Stacey Sheldon
1e79ed6d54 f4 usb: fix invalid reference to stm32f4_discovery.h 2012-02-07 02:25:31 -05:00
Stacey Sheldon
04b81f13a7 f4 usb: fix invalid references to stm32f2xx.h 2012-02-07 02:25:31 -05:00
Stacey Sheldon
266b95561f f4 usb: rename device template to real config file 2012-02-07 02:25:30 -05:00
Stacey Sheldon
a4ae844f2b f4 usb: rename otg template to real config file 2012-02-07 02:25:30 -05:00
Stacey Sheldon
58bbe0870d f4 usb: allow device->host data to be const 
This allows the application code to pass const
descriptors to the Tx APIs in the STM32 USB
library.
 2012-02-07 02:25:30 -05:00
Stacey Sheldon
4b911bb3be f4 usb: remove unused device class examples 2012-02-07 02:25:30 -05:00
Stacey Sheldon
efbe8bbfdd f4 usb: convert all line endings to LF-only 
Line ending changes only.  No functional changes.
 2012-02-07 02:25:30 -05:00
Stacey Sheldon
6a43d1c7ed f4 usb: Import pristine STM32F4 USB Library v1.1.0 
Taken from version STM32F4-Discovery_FW_V1.1.0 of the
library from ST.
 2012-02-07 02:25:30 -05:00
Stacey Sheldon
4fafbb13ed makefile: Add EF (Entire Flash) targets for all boards 
These new build targets will construct a flash image that
includes both a bootloader as well as a firmware image all
in one.  Examples:
  make ef_coptercontrol
  make ef_revolution

This also adds support for a new target for writing this EF
image to boards that support a DFU interface (only F4-based
boards).  This can be done by running:
  make dfuutil_install
  # Boot board with SBL asserted to activate STM32 DFU ROM
  # Attach USB cable
  make ef_revolution_dfu

Bootloader images are also now padded out to occupy the full
BL flash region.
 2012-02-03 00:59:36 -05:00
James Cotton
18a64e261f Going a bit overkill with this - deinit who SPI block between transactions. 2012-02-02 12:32:57 -06:00
James Cotton
03cfb1453a DeInit SPI DMA between transactions. Somehow if this doesn't happen the next 
transaction doesn't start at the beginning again.  Something is still not quite
right because first few bytes aren't getting across.  Need logic analyzer.
 2012-02-02 11:37:35 -06:00
James Cotton
77a6abb341 For PIOS_SPI F4 do not enable the TX irq. Also do not wait for the 
transmission to finish either.
 2012-02-02 11:24:14 -06:00
James Cotton
0a71a48c57 Sending all FF finally again 2012-02-02 10:36:09 -06:00
James Cotton
29237f97ae For SPI slave devices we need to handle the interrupt differently since 
transactions should already be completed.  Also reset the callback so in the
case of noise on the IRQ line it will not keep firing interrupts.

I suspect we should probably disable interrupts in this handler to prevent
refiring.
 2012-02-02 10:13:09 -06:00
Alessio Morale
820e8ac062 Handle different prescaler values for timers on APB1 and APB2. 
The PIOS_MASTER_CLOCK has been removed in favor of
PIOS_SYSCLK (the master clock value,168000000 for revolution)
PIOS_PERIPHERAL_APB1_CLOCK and
PIOS_PERIPHERAL_APB2_CLOCK
Look at STM32F4xx_Revolution.h for the list of timer/peripheral and APB them belongs.
 2012-01-28 20:04:55 +01:00
James Cotton
fe7b9a909a LED: Update the LEDs on revo 2012-01-26 09:11:27 -06:00
James Cotton
20670d049b Update pios_led for F4 targets to match the new F1 implementation. Also fix 
type for F1 in GPIO labels.
 2012-01-25 22:50:19 -06:00
James Cotton
7c22215e0b Patch from Sambas to fix F4 on windows 2012-01-24 10:33:07 -06:00
James Cotton
aaf1c5dfdd Update the F1 SPI library to support multiple NSS lines 2012-01-23 23:27:02 -06:00
James Cotton
886d5456ac Update pios_exti for F4 2012-01-23 16:55:54 -06:00
James Cotton
b2a292e9c4 Move all the drivers to the PiOS/Common directory to prepare for refactoring 
the EXTI calls they make to the portable version
 2012-01-23 10:11:46 -06:00
James Cotton
c84240e485 Merge branch 'next' into revolution3 
Conflicts:
	flight/PiOS/STM32F10x/pios_bmp085.c
	flight/PiOS/STM32F10x/pios_exti.c
 2012-01-23 06:51:30 -06:00
James Cotton
21ae37b3de Remove BMP085 driver from F4 target 2012-01-23 06:44:25 -06:00
James Cotton
838370b3a4 Fix calls to backup registers on F4 2012-01-21 13:21:37 -06:00
James Cotton
bb0bfe0ae4 Merge branch 'next' into revolution3 
Conflicts:
	flight/Bootloaders/CopterControl/Makefile
	flight/Bootloaders/PipXtreme/Makefile
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/CopterControl/Makefile
	flight/INS/inc/pios_config.h
	flight/Libraries/taskmonitor.c
	flight/Modules/Altitude/altitude.c
	flight/Modules/Attitude/attitude.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/Makefile.posix
	flight/OpenPilot/System/inc/pios_usb_board_data.h
	flight/OpenPilot/System/inc/taskmonitor.h
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/System/taskmonitor.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_bmp085.c
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/PiOS/pios.h
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/System/inc/taskmonitor.h
	flight/Revolution/System/taskmonitor.c
	ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
	shared/uavobjectdefinition/systemalarms.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-01-21 11:27:03 -06:00
James Cotton
5dbbfec8a9 Make the BMA180 driver use the appropriate claim method from the ISR. Also 
slow down this bus to 10 MHz.
 2012-01-21 09:57:02 -06:00
James Cotton
ff0bd87f4e PIOS SPI: Add a second claim bus method for use in ISR. This has no timeout 
and uses an ISR safe queue claiming method.  This avoids deadlocks when ISR
blocks other tasks from freeing the bus.
 2012-01-21 09:07:06 -06:00
James Cotton
ec903449cd Remove line that bypassed the BMA180 startup test 2012-01-21 08:46:32 -06:00
James Cotton
7f284596f2 Attempting to get flash and BMA180 to coexist 2012-01-20 13:33:21 -06:00
James Cotton
1e8811362e On revolution attach the flash chip to the accel bus now. Also extended the 
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
 2012-01-20 07:37:47 -06:00
James Cotton
1b5e776dc5 Hardcoded scale for now since it isn't picking up from the cfg structure. 2012-01-17 19:53:20 -06:00
James Cotton
ce2d0fcbb1 L3GD20 data now running through IRQ -> FIFO 2012-01-17 19:36:32 -06:00
James Cotton
35025303cd Getting data from gyro. 2012-01-17 19:29:38 -06:00
James Cotton
8b42fbeafc Revert "Fix case in library.mk to stop Brian bitching :)" 
This reverts commit d39e818ca6.
 2012-01-08 09:27:13 +01:00
James Cotton
d39e818ca6 Fix case in library.mk to stop Brian bitching :) 2012-01-08 09:10:56 +01:00
James Cotton
ebbe1bd497 Some beginning work on the l3gd20 driver 2012-01-08 09:07:07 +01:00
James Cotton
cc47520baa Checking ID on ST gyro works 2012-01-04 23:23:42 -06:00
James Cotton
0cc18e7dcf Add files for new L3DG20 sensor 2012-01-04 20:33:54 -06:00
James Cotton
0da6109871 Update the F4 copyright headers to 2012 2012-01-04 19:29:29 -06:00
James Cotton
25dfb5463e Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by 
default.
 2011-12-29 02:08:13 -06:00
James Cotton
c080080810 Add ability to change the SPI bus runs at 2011-12-29 00:09:53 -06:00
James Cotton
05da41a79b Get FirmwareIAP object working on revo 2011-12-24 13:15:56 -06:00
James Cotton
569b201b58 Move the bl_helper out of the common directory as it isn't 2011-12-24 13:10:23 -06:00
James Cotton
1af66fc3d2 Get rid of 500 ms delay in startup for the pios_sys so that servos start 
properly but a delay is still needs to get MPU6000 up right.  Fucking POS.
 2011-11-27 18:05:20 -06:00
James Cotton
f7f94011ee Damnit. For higher bus speeds MPU6000 chip must be initialized twice in a row. 
WTF piece of shit.
 2011-11-27 02:35:08 -06:00
James Cotton
f7d13ebd57 Hack to tweak the gyro gain for now although its too far out at the moment so 
something isn't configured properly.  Possibly it is staying in 250 deg/s mode.
Also make sure if the MPU6000 fifo backs up to pull extra data.
 2011-11-27 01:22:37 -06:00
James Cotton
8bbc767a4e Get the pressure sensor working and reading into Revolution 2011-11-27 00:52:09 -06:00
James Cotton
13729f854e PiOS F4: Fix PWM timer interrupts and enable PWM input 2011-11-26 22:41:41 -06:00
James Cotton
21367d3a22 Spektrum support for Revolution 2011-11-26 22:19:42 -06:00
James Cotton
e24c905ff7 F4 PiOS: Reimplement the RTC logic for F4 2011-11-26 22:13:57 -06:00
James Cotton
11ad135b27 Some changes to MPU6000 driver to make it start more reliably on fresh powerup 2011-11-26 14:12:12 -06:00
James Cotton
c57acf6459 F4 PiOS: Must use a different remap command on F4 for timer module to command 
pin.  Include the remap source in the config structure now.
 2011-11-26 03:35:26 -06:00
James Cotton
de9a8453ef Configure the board to use PWM input and servo output 2011-11-26 02:19:56 -06:00
James Cotton
da75e9fdaf PiOS: Make I2C return an error code for NACK 2011-11-19 00:11:16 -06:00
James Cotton
a7ef5601e0 Update the MPU6000 FIFO code and also fix the temperature code 2011-11-18 00:24:55 -06:00
James Cotton
6d74e96c31 Got attitude working again. MPU6000 FIFO reading needs a bit of work. 2011-11-18 00:00:55 -06:00
James Cotton
79730d5afa Try and get the MPU6000 buffer to run down. Staying high for some reason. 2011-11-17 11:23:31 -06:00
James Cotton
0efffef1fa Work on bringing the Revolution board up 2011-11-17 10:13:34 -06:00
James Cotton
d97e5dbc59 Add SPI MPU6000 driver. Unfortunate hack in HMC5883 EXTI handler to call 
MPU6000.  Need to generalize EXTI ASAP.
 2011-11-17 10:12:10 -06:00
James Cotton
1deb799b6f Get simple attitude estimation working on F4 INS. Also make MPU6050 return 
scaling that casts to degrees.
 2011-11-16 11:36:04 -06:00
James Cotton
aeb42332d6 Get the MPU6050 fifo running and read by the attitude module 2011-11-14 11:23:14 -06:00
James Cotton
1086df5b21 Correctly configure MPU6050 interrupt. However currently not pushing data to 
the buffer as that seems to fail.
 2011-11-14 11:11:40 -06:00
James Cotton
da679441ec Duplicate the spektrum (dsm) driver to F4 branch 2011-11-14 10:12:51 -06:00
James Cotton
180d84e373 Update the MPU6050 code a bit more to use the right registers. 2011-11-14 10:09:49 -06:00
James Cotton
2eb89e9b81 No reason for the data read flag in pios_bmp085.c to be a semaphore 2011-11-14 10:07:19 -06:00
James Cotton
96a098bf74 Add code for MPU6050 driver 2011-11-13 19:44:56 -06:00
James Cotton
938a577d11 Small change to pios_adc so it works when not enabled 2011-11-13 17:14:08 -06:00
James Cotton
ec84fc4058 Get the Revolution bootloader working 2011-11-13 17:13:42 -06:00
James Cotton
c0f16d2f44 Revolution: Configure clocks correctly 2011-11-03 20:12:34 -05:00
James Cotton
0ce80e02f5 Compiles now 2011-11-02 02:51:20 -05:00
James Cotton
0931a518d4 Bring F4 PiOS up to date with some of our timer conventions 2011-11-01 04:39:51 -05:00
James Cotton
4d6f810984 Make ADC driver play properly when not included 2011-11-01 03:22:48 -05:00
James Cotton
9607da9c62 Add some drivers to the device specific library for now until the exti problems 
are fixed
 2011-11-01 03:19:58 -05:00
James Cotton
2cc0b301ce Make some of the StdPeriph function calls const where appropriate 2011-11-01 03:18:59 -05:00
James Cotton
3388843fb5 Merge in PixHawk F4 work 2011-11-01 01:09:55 -05:00