1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
Commit Graph

56 Commits

Author SHA1 Message Date
Oleg Semyonov
bac95dae11 OP-483: get rid of -D install switch (doesn't work on Mac) and use mkdir -p instead 2011-05-14 23:17:08 +03:00
Oleg Semyonov
37868a4c10 OP-483: add install target for firmware
make INSTALL_DIR=dir INSTALL_PFX=pfx INSTALL_SFX=sfx install
installs binary file into specified install directory adding
optional prefix and/or suffix.
2011-05-13 11:25:32 +03:00
Stacey Sheldon
29ec2f198b build: convert all app loads to require bootloaders
This change is made up of a number of tightly coupled
changes:
 - Deprecate the use of the USE_BOOTLOADER command-line
   option.  It is now hard-coded in each Makefile.
   Overriding it on the command line is not allowed.
 - Split apart the memory declaration and the section
   declaration in all linker files (*_memory.ld and
   *_sections.ld).
 - Describe the split between bootloader and app sections
   of flash in each board's _memory.ld file.
 - Change program target to selectively erase flash so
   that the installed bootloader is preserved across even
   JTAG programming operations.
 - All elf files are built with debug symbols and are not
   stripped.  This should help debugging with gdb.  The
   images programmed on the boards are all .bin files now
   which do not include symbols.
2011-05-08 12:40:29 -04:00
Stacey Sheldon
7e99419c8a build: Add support for %.bin.o generation
The .bin.o rule places the contents of a raw .bin file
into an .o file wrapped within fixed symbols for start
and end.  This can be used to embed a binary file inside
of an executable.

The symbols for the embedded binary blob are:
 _binary_start
 _binary_end
 _binary_size

NOTE: The way the .bin.o rule is currently written, you
can only embed one binary blob in an executable since the
symbol names will collide if you add multiple blobs.  This
limitation is easily removed later if necessary.
2011-05-07 18:05:50 -04:00
David Buzz Carlson
c93ab7e723 Change CC, OP MB, and AHRS to use bootloader by default.
Also change AttitudeActual to update at 10Hz rather than 2 Hz.  The increased bandwidth is minimal and the resulting "polish" that it adds to the look-and-feel of the GCS is signifcant.
2011-05-02 00:50:42 -07:00
James Cotton
5f776f0b58 Merge branch 'master' into OP-439_CorvusCorax_Bootloader-Makefile-and-OpenOCD-config-for-Linux 2011-04-27 23:41:35 -05:00
James Cotton
69d03ca101 OP-439: Simplify further. Abstract most of the OOCD flags into the common
firmware include and delete all the extra foss-jtag config files.  There is now
a legacy file for the revA board a second for AHRS that changes the port
2011-04-24 10:19:00 -05:00
Corvus Corax
ee7179bd53 OP-439 unified OpenOCD config for mac os x and Linux, Makefiles adapted accordingly 2011-04-24 12:10:33 +02:00
Corvus Corax
357bc369db PIOS: Bootloader Helper functions should sit in HAL, not duplicated in every single architecture. 2011-04-23 19:40:41 +02:00
peabody124
99c00fb9fe Revert changes to AHRS Makefile. Need to keep DEBUG=NO.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-11 18:47:36 +00:00
jonathan
9f5c393672 OP-191: Add svn:eol-style property for native line endings on checkout;
Add (temporarily disabled) hooks for the rotational misalignment between the accelerometer and magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3151 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 18:37:32 +00:00
stac
6700a74782 makefile: refactor makefiles and clean up output
This significantly reduces the amount of duplication
across the various firmware makefiles.

The new firmware-defs.mk file should contain only
macros/declarations that will apply to all firmware
makefiles.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2854 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 04:18:53 +00:00
corvus
0cc957bc9c reverting bad commit of these files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2605 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 12:31:13 +00:00
corvus
e6004ae95e PiOS.posix - split up FreeRTOS port into a linux version (original FreeRTOS linux code) and a non linux POSIX compatible version (Mac OSX, BSD, ...) - OS detection by Makefile.posix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2604 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 12:26:45 +00:00
peabody124
1daabba5c1 Build: Change the lower makefiles to use forward slashes but also create
directories on
windows

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2585 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 20:01:06 +00:00
peabody124
ba1d519192 Get CC working with new file locations and also fix AHRS build to work with
these locations

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2581 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 08:14:00 +00:00
sambas
826ce00bf4 another one for Big Mess
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2546 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:18:52 +00:00
stac
2d53902148 UAVObjects-flight: Move generated files into build dir
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2520 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-22 17:38:15 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:22 +00:00
peabody124
7c9b3b3d69 OP-265 AHRS: New file locations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2420 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:34 +00:00
zedamota
691c58a583 OP-268/PipX Bootloader - Changed the size of BL def.
New naming convention for the linker files:
link_(board_name)_(density)_(bl usage).ld

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2401 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 17:34:22 +00:00
peabody124
314a2fcf00 flight/AHRS: Make the 13 state INS default again, the accel bias drift can be a
little aggressive.  Also increased the drift rate of the gyro bias per Sambas'
testing (thanks) although not to the levels required for flying through 40 deg
C transitions.

Made the dump_ekf function handle both numbers of states

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2282 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 19:38:54 +00:00
peabody124
ac24d86f40 AHRS Makefile: PT accidentially turned on DEBUG=YES when checking in
FirmwareIAP to get me back for breaking Sys_Reset.  You got me! :)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2246 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 08:56:12 +00:00
zedamota
c034a35d2c OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-15 19:06:28 +00:00
peabody124
88a0ede73b OP-203: Flight/AHRS: Add fifo_buffer dependency for pios_usart
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2146 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 18:19:58 +00:00
peabody124
8ea727d10c AHRS/Makefile: Remove trailing CR
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2145 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 18:19:56 +00:00
les
2125e2479d Added AHRS boot loader SPI protocol
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 17:54:00 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:18 +00:00
zedamota
0371808099 OP-21/Flight Bootloader - should make things cross platform.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1757 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 00:36:42 +00:00
zedamota
5fb45f835e OP-21/Flight Bootloader - Bug fix, 1 more
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1696 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 17:09:06 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 18:27:53 +00:00
zedamota
e8d6e7c557 Flight - Centralized board specific files, BL and User FW uses the same board definitions, no need to have 2.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1663 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 19:19:38 +00:00
stac
1017d0294b ahrs: always enable -g for gdb debug symbols
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1635 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 15:45:41 +00:00
stac
7886a617dc Revert "ahrs: No longer support -O0 since it doesn't fit"
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1634 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 15:45:39 +00:00
stac
73787f7f15 ahrs: No longer support -O0 since it doesn't fit
Leaving debug on allows the -g option to be enabled
so that we can have symbols in gdb even though we're
forcing the optimization flags to -Os.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1631 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:06 +00:00
stac
0e7a801e9e hmc5843: Add support for DRDY signal from magnetometer
The DRDY signal from the magnetometer is connected to PB8
on the STM32.  This pin is now configured as an external
interrupt and is now used to signal when new data is
available from the magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1628 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:02 +00:00
peabody124
c5fe985a45 AHRS: Gets timing working correctly to compute the EKF rate and idle time in real values
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 07:03:36 +00:00
peabody124
0875dc8442 AHRS: First pass refactoring the ADC code into another function. Still want to clean up a few constants make the downsampling go into a smaller circularbuffer nicely.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1614 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 07:03:34 +00:00
peabody124
1051d894b9 AHRS: Merged in some new code from Dschin that expliclity writes the prediction terms in the covariance matrix. Also made changes to compile with -Os. Now runs around 125 - 150 Hz depending on corrections used (this will become adjustable from GCS shortly).
Squashed commit of the following:

commit 897e3365ab6c762584c34238efd12dc144e72af0
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 22:15:21 2010 -0500

    AHRS: Getting it running nice and quickly.

commit 53d72fb849164730c89873cab81c9e09be0b112b
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:57:46 2010 -0500

    AHRS: Make more variables volatile for -Os.

commit 4fa90821b5d3d8c2ea5e67756313a8a63c0eeb8c
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:11:31 2010 -0500

    AHRS/Makefile: -O0 not added to allow me to try various space flags that don't break code.

commit 5bd17a304dc28dc271c2f3e8c6cb8ad4a830404f
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:44:05 2010 -0500

    AHRS: Make debuggign USART easy to disable

commit 5453f2a7939492769fe9e9cc822e69c107320670
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:38:37 2010 -0500

    AHRS: Explicitly expand covariance prediction.  Brings computations from 160 to 90.  Makes it not fit in AHRS though.

commit b6712da7eece2a464a2073d24b77be22bfa47094
Author: James Cotton <peabody124@gmail.com>
Date:   Sun Sep 12 22:59:42 2010 -0500

    AHRS: Make it easy to comment out the I2C/Magnetometers.

commit 8c84d0091f3d6f6bedc7a0224a4ed9cb099b022b
Author: James Cotton <peabody124@gmail.com>
Date:   Thu Sep 9 00:49:50 2010 -0500

    AHRS: Small change to INSGPS analysis tools

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1613 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 06:42:56 +00:00
peabody124
ef0b307353 [OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 20:38:27 +00:00
peabody124
fda6fc8371 Merge branch 'mac_support'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1324 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:29:53 +00:00
peabody124
64bcebb87a AHRS: Fixed bug in the downsampling code (used a += a + blah, dumb). Also added initialization of the magnetic flux based on fixed GPS settings (I hope you're near Houston). I will add the GPS communication shortly.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1307 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 05:32:07 +00:00
dschin
ae18a8e89c Added general functions for coordinate conversions
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 00:09:32 +00:00
peabody124
d2e234b53a Adding the code from Dr. Dale to the AHRS. Currently diverges though, but not on the PC.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:18 +00:00
peabody124
cc2441d41b Adding ADC downsampling code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:08:57 +00:00
stac
e3824a6d78 ahrs spi: Add AHRS SPI link management FSM
To the outside world, the AHRS can be in one of only a few
primary states:
 Not present - AHRS is absent or non-responsive via SPI
 Inactive - Only link-level status messages are processed
 Ready - Ready to receive the next application level message
 Busy - Application level message is being processed

Internal to the AHRS, there are many more states that need to be
managed.  This FSM provides the necessary decoupling between the
ISR (which is being driven by the SPI link) and the AHRS main
processing loop which must continue to run its filters independently
of the SPI messaging rate.

With this structure, SPI messages can be received at any time but
processed at only specific points within the filter chains.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1005 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:22 +00:00
stac
89a6d6d912 ahrs spi: Add definition of OP<->AHRS SPI protocol
This defines the SPI message format as well as a few
initial messages for moving data across the link.

The v0 messages are place holders for firmware download
in the bootloader.

The v1 messages are to be used by the main application.

Note: This is not the final protocol definition.
      Subject to change without notice.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:15 +00:00
stac
5c230e734d ahrs: Turn on -Werror for AHRS build
Disallow warnings of any kind in AHRS code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@997 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:20:54 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
stac
90f9e6d309 openocd: support OP and AHRS at the same time
Split the floss-jtag.cfg file into separate versions
for OP and AHRS.

Push AHRS onto non-default ports for gdb, tcl and
telnet.

Update the AHRS gdb setup script to point at the new
gdb port.

Add (commented out) example sytax to support distinguishing
between multiple floss-jtag boards that don't have serial
numbers.  Uses the usb bus address of each device as the
selector.  See this patch posted to the openocd mailing list
for how to add this functionality to openocd:
  http://lists.berlios.de/pipermail/openocd-development/2010-June/015785.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:30 +00:00