PT_Dreamer
ae80370b1d
GCS-Fixes custom mixer saving bug
2012-10-13 17:45:41 +01:00
PT_Dreamer
c6936870c1
GCS-Fixes custom mixer saving bug
2012-10-12 18:32:54 +01:00
James Cotton
96afe7cffd
Merge remote-tracking branch 'origin/stac/add-debug-consoles' into next
2012-10-12 08:07:44 -05:00
James Cotton
d0ee515daf
Merge remote-tracking branch 'origin/kenz/coax_heli' into next
2012-10-12 08:06:13 -05:00
Laura Sebesta
36087b1339
Changed new config files to include new HiTL settings.
2012-10-12 08:53:13 +02:00
Laura Sebesta
2bad221ec2
Merge branch 'kenz/hitl_merge' into next
2012-10-12 07:41:17 +02:00
PT_Dreamer
d8f99b4096
GCS - Remove test button
2012-10-11 22:33:05 +01:00
PT_Dreamer
c99d048eb9
GCS-Wizard
...
Be a bit more verbose on one of the board update messages.
2012-10-11 14:59:18 +01:00
Fredrik Arvidsson
18f2d8e219
Added new button graphix for upgrade button on autoupdate page. Changed the texts slightly to be less offending. ;)
2012-10-11 13:31:02 +02:00
Stacey Sheldon
f0e0c2e79e
console: add debug console via USB CDC/VCP interface
...
The USB VCP Port has a new DebugConsole setting that
routes all output destined for PIOS_COM_DEBUG to the
emulated serial port.
To enable this in your build, you'll have to build like:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
You can then output formatted text to the console
like this:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
PIOS_COM_SendFormattedString(PIOS_COM_DEBUG,
"foo is %u\r\n",
foo);
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
Please ensure that all of your debug output is
wrapped with these macros so that your debug
code doesn't bloat the firmware image.
2012-10-11 00:51:09 -04:00
Stacey Sheldon
6088c05946
console: add support for serial debug consoles
...
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.
To enable this feature, you need to:
- make fw_coptercontrol_clean
- make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
- configure one of the serial ports as DebugConsole in the GCS
- save settings
- power-cycle your board
Things to note:
- The console is at 57600,8N1.
- This is not currently configurable via the GCS.
- You can only have a single console enabled at a time.
2012-10-11 00:22:07 -04:00
PT_Dreamer
ea3eb984f4
Merge branch 'pt/wiz_autoupdate' of ssh://git.openpilot.org/OpenPilot into pt/wiz_autoupdate
2012-10-10 18:26:28 +01:00
PT_Dreamer
8863601715
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into pt/wiz_autoupdate
2012-10-10 18:22:53 +01:00
zedamota
27fd597795
GCS-Try to fix blanked out dialog on OSX.
2012-10-10 17:36:58 +01:00
zedamota
47f94143b7
GCS- Detect fw bundle presence in a not so ugly way
2012-10-10 16:38:57 +01:00
zedamota
fb27c5d93c
GCS-Fw Auto update - Try to fix win build
2012-10-10 16:36:13 +01:00
James Cotton
0c3084b9b1
OPMap: Line got missed in merge
2012-10-10 09:41:44 -05:00
James Cotton
3110678321
Merge branch 'dynamic_uavo_next' into revo
...
Conflicts:
androidgcs/src/org/openpilot/uavtalk/uavobjects/ActuatorSettings.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/AltitudeHoldSettings.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/FlightBatterySettings.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/FlightBatteryState.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/FlightStatus.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/HomeLocation.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/HwSettings.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/ManualControlSettings.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/OveroSyncStats.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/PipXSettings.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/PipXStatus.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/PositionActual.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/RelayTuning.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/RevoCalibration.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/SystemAlarms.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/TaskInfo.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/UAVObjectsInitialize.java
androidgcs/src/org/openpilot/uavtalk/uavobjects/Waypoint.java
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
2012-10-10 08:27:11 -05:00
Fredrik Arvidsson
befa5da671
Fixed layouts in the setup wizard and made the wizard resizeable.
2012-10-10 00:36:29 +02:00
Laura Sebesta
4b3994a550
Merge branch 'next' into kenz/hitl_merge
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-10-09 22:47:20 +02:00
Fredrik Arvidsson
fc69eaa205
Merge branch 'next' into pt/wiz_layouts
2012-10-09 21:56:27 +02:00
Oleg Semyonov
d60be79133
GCS: fix plugin build dependencies
...
They should reflect the pro/pri files included and be sufficient to
build. Chained dependencies should be built by the make system.
2012-10-09 21:57:58 +03:00
PT_Dreamer
d1b78faeb3
Revert "GCS-Config wizard"
...
This reverts commit 4b5c88589c
.
2012-10-09 18:59:01 +01:00
Fredrik Arvidsson
d98c2aacf3
Merge branch 'next' into pt/wiz_layouts
2012-10-09 19:56:04 +02:00
PT_Dreamer
4b5c88589c
GCS-Config wizard
...
Made the wizard set stab1,2,3 as default flight modes for multis
2012-10-09 00:16:22 +01:00
PT_Dreamer
047201211b
GCS-Change config file name
...
This is to force a new configuration to be loaded and used.
2012-10-08 22:36:32 +01:00
Laura Sebesta
c2b49b6ef3
Merge branch 'kenz/cc_hitl_merge' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/gcscontrol/gcscontrolgadgetoptionspage.ui
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
ground/openpilotgcs/src/plugins/hitlv2/hitlv2optionspage.ui
2012-10-08 15:30:27 +02:00
Laura Sebesta
993cd0f8f6
Added conversion from rotation matrix to quaternions.
2012-10-08 15:17:47 +02:00
Laura Sebesta
db8563f69f
Fix aerosimrc hitl merge issues.
2012-10-08 00:41:58 +02:00
PT_Dreamer
64d2922e71
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into pt/wiz_autoupdate
...
Conflicts:
ground/openpilotgcs/share/share.pro
2012-10-07 21:01:21 +01:00
Fredrik Arvidsson
c03ac35780
Added functionality for skipping autoupdate page if no firmware is available in resource bundle.
2012-10-07 21:49:07 +02:00
chris pember
bb2637054b
hopefully fixed any conflicts
2012-10-07 10:57:53 -07:00
chris pember
ee031fe80d
Merge branch 'next' into cp/extraGUIchanges
...
Conflicts:
ground/openpilotgcs/src/plugins/hitlv2/hitlv2optionspage.ui
ground/openpilotgcs/src/plugins/uavobjectbrowser/uavobjectbrowseroptionspage.ui
2012-10-07 10:32:21 -07:00
chris pember
1d345d6916
Merge branch 'next' into cp/extraGUIchanges
...
Conflicts:
ground/openpilotgcs/src/plugins/pfdqml/pfdqmlgadgetoptionspage.ui
2012-10-07 10:20:38 -07:00
PT_Dreamer
d664ec9705
GCS-Try to fix linux file copy without braking Win
2012-10-07 16:50:04 +01:00
PT_Dreamer
25bb91682b
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-10-07 13:21:04 +01:00
Laura Sebesta
b0182a47e3
Fixed csv export error, and increased resolution of all variables to 10 significant digits.
...
(10 sig. dig. are required for full resolution GPS latitude and longitude output.)
2012-10-07 09:09:15 +02:00
Laura Sebesta
22d7c8947e
Removed extraneous comments.
2012-10-07 08:50:24 +02:00
PT_Dreamer
5c879d5238
GCS-Fix file copying on linux
...
It got reverted on a merge
2012-10-06 23:41:14 +01:00
PT_Dreamer
4ef8b78ff8
GCS-Made autouploader fetch fw from fw bundle
...
Fw bundle is built with "make package_resource".
This target is a dependency of the package target but needs testing
on the different systems.
If the bundle is not present the build will not fail and
the wizard will jump the autoupdate page (not working FIXME)
2012-10-06 23:24:21 +01:00
PT_Dreamer
f6443fc995
Merge branch 'stac/package-opfw-resources' of ssh://git.openpilot.org/OpenPilot into pt/wiz_autoupdate
2012-10-06 19:50:17 +01:00
PT_Dreamer
4e4ed172c1
GCS-Added fw bundle resource to the uploader plugin
2012-10-06 19:46:33 +01:00
chris pember
827b8b9486
added groupboxes to the pages that were loose
2012-10-06 11:43:03 -07:00
Fredrik Arvidsson
2af2a732fb
Complete set of new icons.
2012-10-06 16:12:15 +02:00
chris pember
f6c4b4b57b
fixed one last settings page
2012-10-06 02:09:50 -07:00
chris pember
c2641fd21d
added scroll areas to all the preference settings screens
2012-10-06 01:55:24 -07:00
Fredrik Arvidsson
08be8f5e8f
Merge branch 'next' into thread/config_art
2012-10-06 10:45:08 +02:00
Fredrik Arvidsson
ffe6c0bcb5
Added icons and updated some other code.
2012-10-06 10:42:57 +02:00
PT_Dreamer
519e240a6e
GCS-Fix file copying on linux
...
It got reverted on a merge
2012-10-06 01:44:20 +01:00
PT_Dreamer
a313a54c17
GCS-Added temp resource file containing fw
2012-10-06 01:43:44 +01:00
PT_Dreamer
5d24bc55a6
GCS-Created wizard firmware autoupdate page
2012-10-06 01:42:33 +01:00
PT_Dreamer
2c4f50c4f5
GCS-Export uploader functions
2012-10-06 01:40:25 +01:00
PT_Dreamer
8c2a5e9d06
GCS-Uploader Auto update function
...
Quick and dirty autoupdate function.
The uploader plugin is in need of a major refactoring to separate the
logic from the UI. This will be on my TODO list.
2012-10-06 01:35:34 +01:00
Fredrik Arvidsson
eb35ba4cbb
Added even more new icons.
2012-10-05 18:16:04 +02:00
Fredrik Arvidsson
a57435f183
Added more new icons.
2012-10-05 16:24:56 +02:00
James Cotton
2191befe17
Merge remote-tracking branch 'revo/brian/rfm22_rf2' into revo
...
Conflicts:
flight/PiOS/Common/pios_rfm22b.c
2012-10-05 08:20:35 -05:00
Fredrik Arvidsson
d765ac01d5
Added new icons and fixed icon states when selected/highlighted.
2012-10-05 14:30:37 +02:00
chris pember
919202875e
temp fix for the sizing of the hitlv2 page to stop the squashing
2012-10-05 19:35:25 +10:00
David Ankers
bcc39b7fad
Make options window taller, turn on OpenGL by default on the map, we
...
already use this for the QML PFD and no issues reported.
2012-10-05 18:47:00 +10:00
David Ankers
7e8aa7079c
Make uploader plugin board images looks nicer, spotted by Steve, fixed by
...
Steve.
2012-10-05 17:39:13 +10:00
Fredrik Arvidsson
28afadf8b9
Added first icons and started to fix with icon states.
2012-10-05 08:16:26 +02:00
David Ankers
d42f4089ed
Updated tab Icons from Steve, match the welcome screen icons
2012-10-05 15:26:45 +10:00
chris pember
649a5b4b1e
temp fix for the sizing of the hitlv2 page to stop the squashing
2012-10-04 21:12:19 -07:00
Brian Webb
5724fa083c
RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before.
2012-10-04 21:11:40 -07:00
chris pember
a536f74722
temp fix for the sizing of the multi page that will allow folks on tiny screens to have a uavo browser if they want
2012-10-05 13:25:49 +10:00
James Cotton
82efb91fad
Add developer GCS config layout
2012-10-04 20:44:00 -05:00
David Ankers
aaea66a5d0
Fix splitter on Scopes screen
2012-10-05 11:18:16 +10:00
David Ankers
2573e84e76
Change Welcome screen icon by popular request
2012-10-05 10:18:29 +10:00
James Cotton
99a0eeae3d
Merge commit 'e89ae3389d95603fccdcda535ab6cbed97099851' into revo
2012-10-04 16:38:26 -05:00
James Cotton
13cabd2ea4
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/Common/pios_rfm22b.c
2012-10-04 16:38:08 -05:00
PT_Dreamer
d9afd58ee2
GCS-Added layouts to new wiz
2012-10-04 15:37:16 +01:00
PT_Dreamer
29111b3529
GCS-Map fixes
...
Find place now works when the user presses enter
Find place goes to zoom level 12.
Don't go to UAV position on HW connect if "follow UAV" mode is not set
2012-10-04 12:32:30 +01:00
PT_Dreamer
ac8d399d8d
GCS-Fixes Flight data tab icon not being displayed
2012-10-04 12:15:20 +01:00
chris pember
e89ae3389d
temp fix for the sizing of the multi page that will allow folks on tiny screens to have a uavo browser if they want
2012-10-03 23:46:46 -07:00
David Ankers
af7fffdab6
Add Gadgets to HiTL screen
2012-10-04 13:09:54 +10:00
David Ankers
6b2ac1cf39
Spelling on browser config, add size settings to options so things don't
...
get scrunched.
2012-10-04 12:52:36 +10:00
Laura Sebesta
35f7b4903f
Several files still needed to have comments removed.
...
Missed merge in git. Retry.
2012-10-03 15:10:58 -05:00
PT_Dreamer
a1ebdc38fa
Merge branch 'thread/OP-39' of ssh://git.openpilot.org/OpenPilot into next
2012-10-03 14:13:28 +01:00
Fredrik Arvidsson
4f84c4ba3b
Merge branch 'next' into thread/OP-39
2012-10-02 23:20:28 +02:00
Fredrik Arvidsson
a47687cff8
OP-39 Added correct dependencies to SetupWizard plugin specification.
...
Renamed FlashPage to FlashDance, eeh, no SavePage :)
Removed unnecessary dependency in setupwizard.pro
Fixed a bug with the Next button on the first page.
Fixed a bug with the cancel button on the last page.
2012-10-02 23:17:56 +02:00
James Cotton
71e1a14e93
GCS Uploader: Add a backward compatibility condition for RM1 using RM2 firmware
2012-10-02 09:37:55 -05:00
Fredrik Arvidsson
13f10949e8
OP-39 Removed an unnecessary struct declaration. Changed some texts. Removed some empty lines.
2012-10-01 21:50:00 +02:00
PT_Dreamer
8744e3dc93
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-10-01 13:42:59 +01:00
Kenz Dale
b740fefa56
Fixed bug by which aerosimrc plugin was not compiled.
2012-10-01 12:03:30 +02:00
Fredrik Arvidsson
138848453f
OP-39 Changed the Radio Setup Wizard to go to the Arming Settings screen after the last step in the wizard. Changed the info text in a dialog.
2012-09-30 17:27:20 +02:00
Fredrik Arvidsson
eed564a3c4
OP-39 Adding label to indicate when leveling is done in a more clear way.
2012-09-30 14:41:58 +02:00
Fredrik Arvidsson
ede0c2ebf9
OP-39 Small adjustment.
2012-09-30 14:24:54 +02:00
Fredrik Arvidsson
949569fdec
OP-39 Added handling of switching to correct tab in input configuration section when starting Radio Setup Wizard.
2012-09-30 14:19:31 +02:00
Fredrik Arvidsson
3fa2d504bb
Merge branch 'next' into thread/OP-39
2012-09-30 13:37:24 +02:00
Fredrik Arvidsson
19875fb70b
OP-39 Fixed controller identification bug. Now using telemetry manager to receive notifications about connect/disconnect.
...
Changed text on last page in wizard.
2012-09-30 13:35:35 +02:00
Stacey Sheldon
ed24d93ab1
gcs gamepad: teach GCS that an accel is not a gamepad
...
The gcscontrolgadget expects all gamepad devices to have
at least 4 axes of control. The SDL layer (on Linux anyway)
will detect the accelerometer that's built into some laptops
as a gamepad with 3 axes.
This change prevents the accel from being selected and
subsequently flooding the console with errors from
gcscontrolgadget every 10ms.
2012-09-29 21:47:26 -04:00
PT_Dreamer
4edf78d1cd
GCS-No more hidden settings.
2012-09-29 22:44:52 +01:00
Fredrik Arvidsson
fdec9ce149
OP-39 Fixed a lot of textual stuff.
...
Changed layout on some pages to make room for longer texts.
Changed default neutral value for output from 1080 to 1000.
Renamed 'Hexacopter H' to 'Hexacopter X'
2012-09-29 11:47:16 +02:00
Fredrik Arvidsson
3b9e50ad51
Merge branch 'next' into thread/OP-39
2012-09-29 09:43:50 +02:00
PT_Dreamer
b637bfaca9
Revert "Changed UAVO browser erase icon to reset icon."
...
This reverts commit 85ed1c364d
.
2012-09-28 19:36:46 +01:00
PT_Dreamer
399fc7fe85
Merge branch 'cp/extraGUIchanges' of ssh://git.openpilot.org/OpenPilot into next
2012-09-28 11:55:33 +01:00
PT_Dreamer
dfa60f16b3
Revert "Changed UAVO browser erase icon to reset icon."
...
This reverts commit 85ed1c364d
.
Change voted against by 2 lead devs on the review.
2012-09-28 11:53:19 +01:00
James Cotton
e4faece356
Merge remote-tracking branch 'origin/cp/extraGUIchanges' into next
2012-09-28 01:12:46 -05:00
James Cotton
61f1140645
Merge branch 'revo' into rm2
2012-09-28 01:01:35 -05:00
James Cotton
5c13c31c08
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2012-09-28 01:00:10 -05:00
chris pember
e2389af30d
fixed the stylesheets vertical sliders. pushing to correct branch
2012-09-27 21:06:19 -07:00
chris pember
c6c8ff9487
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-27 20:41:33 -07:00
chris pember
5306b2cb71
fixed the stylesheets so the vertical sliders arent broken looking anymore
2012-09-27 20:41:01 -07:00
Stacey Sheldon
9896a0d416
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 22:42:44 -04:00
James Cotton
29a970564f
Merge remote-tracking branch 'origin/kenz/uavo_util_fixes' into next
2012-09-27 14:07:47 -05:00
Laura Sebesta
a899c87c56
Remove superflous UAVO update call.
...
Add documentation.
Remove commented code.
2012-09-27 19:21:00 +02:00
Laura Sebesta
09b8980881
Fixed copy-pasta error.
2012-09-27 18:06:48 +02:00
Laura Sebesta
9ec05d8928
Added dialog to request altitude when settings HomeLocation via the map.
...
Fixed bug in setHomeLocation, by which altitude was scaled inappropriately.
2012-09-27 14:44:26 +02:00
Laura Sebesta
f532f3cda5
Rewrote uavobjectutilmanager.cpp, such that upon UAVO changes it returns com
...
Updated homelocationutil to remove references to ECEF and RNE.
2012-09-27 11:45:59 +02:00
Fredrik Arvidsson
efd953b00c
OP-39 Fixed a bug in Welcome page button.
2012-09-27 08:18:50 +02:00
James Cotton
26408e286f
GCS Stabilization: Force the apply button to always be there as I can't find expert mode
2012-09-26 09:49:33 -05:00
James Cotton
0fa4b062a4
Merge branch 'next' into revo
2012-09-26 00:43:02 -05:00
Fredrik Arvidsson
f42085f6ac
Merge branch 'next' into thread/OP-39
2012-09-26 00:44:34 +02:00
Fredrik Arvidsson
e7e95412e8
OP-39 Fixed Wizard Style so that it looks ok on Mac and Windows
...
Changed the output calibration part of the wizard so that it is a part of the wizard flow instead of a separate flow inside one page.
2012-09-26 00:42:17 +02:00
James Cotton
f77df97699
OSGEarth: Remove function definition without implementation.
2012-09-25 13:24:08 -05:00
James Cotton
7d8c61d33d
OSGEarth: Remove reference to caching. Uses old API.
2012-09-25 13:19:18 -05:00
PT_Dreamer
43f85d9617
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-25 10:44:32 +01:00
PT_Dreamer
551c56f3c0
Merge branch 'pt/UAVO_Hash' of ssh://git.openpilot.org/OpenPilot into next
2012-09-25 10:43:59 +01:00
chris pember
b09041cb9f
moved the autotune checkbox up top like the other modules
2012-09-25 00:16:31 -07:00
chris pember
b4ac6a0b86
couple little tweaks, is perfect on linux and windows, close enough on osx
2012-09-24 23:46:34 -07:00
chris pember
36f830e4d3
couple little tweaks, ys, this is endless
2012-09-24 23:28:43 -07:00
chris pember
fc55a52ff4
merged kens branches, changed the wording a little on the pre-autotune page, just need someone to look at one small bit of oddness with the save and apply buttons on autotune page
2012-09-24 21:41:41 -07:00
chris pember
d7eb662761
Merge branch 'kenz/erase2reset' of ssh://git.openpilot.org/OpenPilot into cp/extraGUIchanges
2012-09-24 20:26:30 -07:00
chris pember
086232406d
Merge branch 'kenz/extraGUIchanges' of ssh://git.openpilot.org/OpenPilot into cp/extraGUIchanges
2012-09-24 20:26:04 -07:00
chris pember
ee801431d6
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-24 19:41:59 -07:00
Laura Sebesta
2caf635acd
A couple artwork fixes for reversed motors.
2012-09-24 22:36:39 +02:00
Laura Sebesta
9d5d67a45a
Added swapping of artwork when multirotor direction reversed.
2012-09-24 22:01:19 +02:00
PT_Dreamer
af36409e80
Merge branch 'dmytro/pfd_qml' of ssh://git.openpilot.org/OpenPilot into next
2012-09-24 19:02:51 +01:00
Laura Sebesta
c3a402e52f
Add support for coaxial helicopter.
...
Untested.
2012-09-24 19:17:38 +02:00
PT_Dreamer
c04318493a
GCS- Fixes compile error
2012-09-24 13:38:14 +01:00
PT_Dreamer
8b91e19733
GCS/Telemetry Fixes reconnection loop
...
This fixes a situation where the telemetry would keep looping from the
connected to the reconnecting state. One of the situations this was
happening was going from "halt" to "boot"
2012-09-24 12:32:46 +01:00
PT_Dreamer
c8de27cbaf
GCS/Uploader Changes acording to review
...
Changed template comments.
Added UAVO hash to the GCS help dialog
2012-09-24 12:17:32 +01:00
PT_Dreamer
4e08fa548f
GCS/Uploader- Added leading zeros to git hash
2012-09-24 11:50:15 +01:00
Laura Sebesta
85ed1c364d
Changed UAVO browser erase icon to reset icon.
2012-09-24 10:24:37 +02:00
chris pember
616a27ca82
fixed that path error PT brought up in forum i hope
2012-09-23 22:34:40 -07:00
PT_Dreamer
dc10917f70
GCS-Yaw mixing level reverse button
...
Changed the slider values from -100/+100 to 0/100 and wrote the code for
the invert checkbox.
NOT TESTED
2012-09-23 22:50:05 +01:00
Fredrik Arvidsson
3ef26a633a
OP-39 Moved reboot page to directly after Rx config page.
...
Added partial save to support changed hardware settings.
Made it possible to skip leveling procedure.
Changed some texts.
Changed isRebootRequired() criteria.
2012-09-23 21:58:37 +02:00
Fredrik Arvidsson
5ecf04fb15
OP-39 Restricting connection device to USB when using the wizard. Changed text accordingly.
2012-09-23 14:11:32 +02:00
Dmytro Poplavskiy
dbbdb62173
Added the readymap based earth files
2012-09-23 19:30:10 +10:00
Dmytro Poplavskiy
28f028064a
Fixed the osgearth cache only configuration
...
osgEarth enables it even if OSGEARTH_CACHE_ONLY is set to false
it's necessary to unset it instead
2012-09-23 19:13:05 +10:00
PT_Dreamer
4e1081179b
GCS-Auto Tuning
...
Added code to allow module to be enabled using the checkbox
2012-09-22 23:17:06 +01:00
chris pember
de924ccf5f
just doing local commits so I can grab it in my own branch, just spacing changes and a little rearrangement
2012-09-22 11:09:08 -07:00
chris pember
2e89db5315
Merge branch 'cp/extraGUIchanges' into next
2012-09-22 10:40:09 -07:00
chris pember
7d8c662aef
added the auto tune checkbox, changed the wording on the pre-autotune page
2012-09-22 10:37:22 -07:00
Fredrik Arvidsson
6eaa2daab1
OP-39 Fixed some layout issues on the output calibration page.
2012-09-22 11:21:12 +02:00
Fredrik Arvidsson
81efc2a931
Merge branch 'next' into thread/OP-39
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-09-22 10:58:55 +02:00
chris pember
8551f837b4
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-21 20:44:51 -07:00
David Ankers
570917f331
Remove old versions from source, however, they are still in the Artwork
...
folder.
2012-09-22 10:47:10 +10:00
Nuno Guedes
432642952c
Test Quad updated with CC3D
...
- Old Test Quad versions (OP Pro+AHRS+GPS) renamed to "old".
- New Test Quad versions updated with CC3D
2012-09-22 10:43:23 +10:00
PT_Dreamer
c3b9e7a992
GCS-UAVObject Browser
...
Changed the save and load buttons order
2012-09-21 19:03:40 +01:00
PT_Dreamer
738cc44930
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2012-09-21 18:56:21 +01:00
PT_Dreamer
8f23905a99
GCS- Input config gadget
...
Text changes only from Berkely
2012-09-21 18:40:55 +01:00
Kevin Vertucio
98db6469f9
copy/content revisions and corrections
...
Fixed some corrections missed in SetupWizard
Signed-off-by: Kevin Vertucio <kevin.vertucio@eurorscg.com>
2012-09-21 07:52:24 -04:00
chris pember
d5661bec3e
adjusted the autotune page into 2 tabbed pages
2012-09-20 22:19:40 -07:00
Kevin Vertucio
7797a99bb1
copy/content revisions and corrections.
...
More corrections in SetupWizard plugin
Signed-off-by: Kevin Vertucio <kevin.vertucio@eurorscg.com>
2012-09-20 21:34:14 -04:00
Fredrik Arvidsson
69621ba2f8
Merge branch 'next' into thread/OP-39
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-09-20 23:53:33 +02:00
Fredrik Arvidsson
607497758f
OP-39 Changed to one single wizard button on the welcome page. KISS :)
2012-09-20 23:08:09 +02:00
James Cotton
aff29b5af5
GCS: Add some plugin dependencies. Thanks to Amedee for finding these.
2012-09-20 15:55:16 -05:00
James Cotton
64d8f64ea7
Matlab parser: small fix from Kenz
2012-09-20 15:28:47 -05:00
PT_Dreamer
8bd4a8c6fd
GCS - Very small UI fix on the autotuning page
2012-09-20 10:22:52 +01:00
David Ankers
7f71769c5b
Add Nuno's new models
2012-09-20 13:17:18 +10:00
David Ankers
b921e3213f
Minor tweak to make top row splitters better on smaller screens
2012-09-20 12:55:42 +10:00
Dmytro Poplavskiy
6174fa2d7f
PFD: display the side-slip indicator
2012-09-20 09:17:10 +10:00
Dmytro Poplavskiy
608297fbd3
Changed the default PFD widget to qml based one
2012-09-20 09:14:49 +10:00
Kevin Vertucio
8f8dd12615
copy revisions and corrections in SetupWizard plugin
...
Signed-off-by: Kevin Vertucio <kevin.vertucio@eurorscg.com>
2012-09-19 10:14:59 -04:00
PT_Dreamer
f8387bfaaa
GCS-Only update the aiframe config widget after all relevant objects are updated
...
This was deleted by someone with any aparent reason.
2012-09-18 14:23:35 +01:00
PT_Dreamer
0d30138571
GCS-Reduced UAVO hash bytes displayed from 20 to 8
2012-09-18 13:51:44 +01:00
Fredrik Arvidsson
d80954e13a
OP-39 Changed the layout of the welcome screen and placed the wizard buttons grouped with all other buttons.
2012-09-18 12:48:57 +02:00
Fredrik Arvidsson
57169ceeb2
OP-39 Fixed a bug when changing receiver type in wizard. The channel group type was not correctly set in manual control settings.
...
Added support in code for all known DSM types (2/X10Bit/X11Bit). Still have to add/create GUI/Icons to enable selection of specific protocol.
Renamed some enums to have better and more correct names.
2012-09-17 21:40:42 +02:00
Fredrik Arvidsson
30c1523b80
OP-39 Fixed a bug causing output rate for channel 2 and max channel rate for channel 0 to be wrong when configuring a hexacopter.
2012-09-17 20:00:26 +02:00
PT_Dreamer
fb073059ad
GCS-Use uavo definition hash to check for compatability
...
Unfortunately had to change the iap object.
2012-09-17 17:08:15 +01:00
David Ankers
633286ab73
Grammar change: accidently added and extra extra word. Drifter credit
2012-09-17 22:30:01 +10:00
David Ankers
715aa6543b
Fixed a couple of more spelling mistakes spotted by Drifter (Thanks!)
2012-09-17 22:26:21 +10:00
David Ankers
b9597e96f9
Spelling fix with input wizard, add a t to transmitter spotted by Drifter.
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-09-17 22:20:33 +10:00
David Ankers
ca7ce48a4e
Spelling fix with input wizard, add a t to transmitter spotted by Drifter.
2012-09-17 22:11:51 +10:00
Fredrik Arvidsson
7363a2a266
OP-39 Unmade the mistake :)
2012-09-17 07:12:30 +02:00
Stacey Sheldon
6f9f737c35
gcs uavo: remove obsolete UAVOs from project for GCS
2012-09-16 21:42:05 -05:00
David Ankers
410a9a1837
Add Steve's curve bg
2012-09-17 09:04:36 +10:00
Fredrik Arvidsson
806097fd56
OP-39 Added reboot page to wizard. User needing to reboot should NOT forget it now.
...
Added code to invoke Vehicle Setup Wizard and Radio Wizard from Welcome page.
2012-09-16 23:03:15 +02:00
Fredrik Arvidsson
098c0d43fd
OP-39 Hopefully fixed the servo calibration neutral value issue.
2012-09-16 16:21:51 +02:00
Stacey Sheldon
754f58c33a
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
flight/Revolution/Makefile.osx
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/uploadergadgetwidget.cpp
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-16 09:56:35 -04:00
Fredrik Arvidsson
bd3d3708eb
Merge branch 'next' into thread/OP-39
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.h
ground/openpilotgcs/src/plugins/pfdqml/pfdqmlgadget.h
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/setupwizard/pages/controllerpage.cpp
ground/openpilotgcs/src/plugins/setupwizard/pages/controllerpage.h
ground/openpilotgcs/src/plugins/setupwizard/pages/controllerpage.ui
ground/openpilotgcs/src/plugins/setupwizard/pages/endpage.cpp
ground/openpilotgcs/src/plugins/setupwizard/pages/endpage.ui
ground/openpilotgcs/src/plugins/setupwizard/pages/multipage.cpp
ground/openpilotgcs/src/plugins/setupwizard/pages/multipage.h
ground/openpilotgcs/src/plugins/setupwizard/pages/multipage.ui
ground/openpilotgcs/src/plugins/setupwizard/pages/startpage.ui
ground/openpilotgcs/src/plugins/setupwizard/pages/vehiclepage.ui
ground/openpilotgcs/src/plugins/setupwizard/setupwizard.cpp
ground/openpilotgcs/src/plugins/setupwizard/setupwizard.h
ground/openpilotgcs/src/plugins/setupwizard/setupwizard.pro
ground/openpilotgcs/src/plugins/setupwizard/wizardResources.qrc
2012-09-16 15:14:47 +02:00
Dmytro Poplavskiy
6049f47296
Merge branch 'next' into dmytro/pfd_qml
2012-09-16 13:31:06 +10:00
Dmytro Poplavskiy
150314ff98
PFD qml: align elements to pixels grid
...
It improves the rendering quality,
sub pixels accuracy gives no benefits in placing PFD elements
2012-09-16 10:03:28 +10:00
Stacey Sheldon
9a5ba841cf
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/xplanesimulator.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/pathaction.xml
shared/uavobjectdefinition/waypointactive.xml
2012-09-15 19:55:47 -04:00
PT_Dreamer
fa2aa81079
First pass on using the uavo hash to check compatability between GCS and FW
2012-09-15 23:02:45 +01:00
James Cotton
51683ffb65
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/plugins/config/input.ui
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
ground/openpilotgcs/src/plugins/plugins.pro
2012-09-15 16:31:30 -05:00
chris pember
80c86b0b26
omg I think I fixed the mac spacing,linux and windows tweak test
2012-09-15 12:59:16 -07:00
chris pember
556c8b4464
omg I think I fixed the mac spacing, just checking on windows build now
2012-09-15 12:27:59 -07:00
Fredrik Arvidsson
e3b5727dc1
OP-39 Fixed some layout stuff.
2012-09-15 11:06:19 +02:00
Kevin Vertucio
3236f432b9
Content revisions and updates to SetupWizard plugin
...
Corrected grammar and spelling.
Revised Wizard introduction, multirotor platform descriptions for QuadX, Quad+, Tricopter.
Signed-off-by: Kevin Vertucio <kevin.vertucio@eurorscg.com>
2012-09-14 11:32:09 -04:00
PT_Dreamer
c88c4f0fc0
Merge branch 'pt/CC3D_Release' of ssh://git.openpilot.org/OpenPilot into pt/CC3D_Release
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.h
2012-09-14 14:12:16 +01:00
Dmytro Poplavskiy
a8e6f4991b
Added "use OpenGL" option to qml based PFD
2012-09-14 08:50:02 +10:00
Fredrik Arvidsson
463c14bf84
OP-39 Removed the motor max rate calibration steps from the wizard. Hardcoded max rate to 1900 ms for now.
...
Fixed a bug with button enable/disable in the output calibration page.
2012-09-13 23:49:08 +02:00
Fredrik Arvidsson
4a09886e91
Merge branch 'next' into thread/OP-39
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.h
2012-09-13 22:11:37 +02:00
PT_Dreamer
9f0ad56745
GCS-Minor cleaning acording to review comments
2012-09-13 16:25:32 +01:00
James Cotton
42213b21f7
Make OSG selection a QMake config option (OSG)
...
To include this module from the command line:
make GCS_QMAKE_OPTS="CONFIG+=OSG" -j7 gcs
2012-09-13 09:46:03 -05:00
James Cotton
69688813b5
GCS Build: Include UAVTalk in SystemHealth dependencies
2012-09-13 09:28:46 -05:00
chris pember
9fbaa4410f
new quick gui fixes branch, changed input form so the checkbox for calibrate is now a button, resized that and the wizard button to not be ginormous. no new functionality added, just desing changes
2012-09-12 19:12:23 -07:00
James Cotton
36242fa70e
Delete file that shouldn't have been committed
2012-09-12 16:06:47 -05:00
PT_Dreamer
abbf858123
Fixes special settings not being saved.
2012-09-12 21:57:49 +01:00
PT_Dreamer
d4cd0a9f89
GCS- Config fix and new copy method for data collections
2012-09-12 13:39:35 +01:00
PT_Dreamer
7b1f9bf14e
Merge branch 'pt/CC3D_Release' of ssh://git.openpilot.org/OpenPilot into pt/CC3D_Release
2012-09-12 11:10:15 +01:00
PT_Dreamer
c11958c9b6
GCS-Review comments changes
...
Added font mixer curve font size to linux default and wide stylesheets
Change Node class name to MixerNode to ease stylesheet access
Changed language selection to top of the list
2012-09-12 11:09:30 +01:00
James Cotton
223a3473c2
Merge branch 'next' into revo-mini
2012-09-12 02:03:39 -05:00
James Cotton
f9fd2bd1af
Merge branch 'pidt1' into next
2012-09-11 23:39:50 -05:00
David Ankers
a4729ea27c
Changes to default config, make UAVOB fill left side, add logging as it
...
fits on system better, add GPS desplay gadget also.
2012-09-12 07:49:16 +10:00
Fredrik Arvidsson
a5335a0ace
OP-39 Minor fixes
2012-09-11 20:05:07 +02:00
James Cotton
7cb6e71fae
Remove a Q_UNUSED where the parameter doesn't exist.
2012-09-11 10:21:01 -05:00
James Cotton
2488b48f50
Merge branch 'usb_fixes' into next
2012-09-11 10:18:45 -05:00
James Cotton
d74b9c9b9f
Revert changes from Kenn in pjrc_rawhid which conflict with usb cleanup
2012-09-11 10:18:31 -05:00
James Cotton
509e7a2ec1
Merge remote-tracking branch 'origin/hyper/gcs-levelling-fixes' into next
2012-09-11 03:05:47 -05:00
Dmytro Poplavskiy
02c00fabb2
GCS/PFDqml: split the world view to smaller parts
...
Ground and sky is rendered as QML Rectangle with gradients;
Pitch scale and center line are rendered separately from the world
element, so they always fit the maximum texture size.
2012-09-11 15:25:13 +10:00
Dmytro Poplavskiy
288cb40c92
Updated the pfd.svg file
...
compass-band has a hidden vertical square to make the vertical limit.
New IDs:
world-bg (group of sky and ground)
sky (blue part of the world)
ground (orange part of the world)
pitch_scale (the center scale)
world-centerline (the centerline in the center of the world and in
the middle of the sky and ground)
By muralha
2012-09-11 15:22:04 +10:00
Dmytro Poplavskiy
53d8fa4666
Added the border parameter to the svg image provider
...
it's useful to extent the image by 1 pixel sometimes,
so the AA area is not clipped.
2012-09-11 15:19:19 +10:00
Dmytro Poplavskiy
18a9ad3aa8
PFD: split the compass band to parts to fit the texture limit
...
On older graphics cards the texture size limit
may be smaller than the compass band width,
QML downscales the element to fit the texture.
To avoid this, split compass band to tiles.
Added parameter like hslice=2:8 to svg image provider
and SvgElementImage.
2012-09-11 15:16:58 +10:00
Fredrik Arvidsson
7d7d1644bc
OP-39 Fixed disabling of wizard buttons during bias calculation and saving of configuration.
2012-09-10 22:55:02 +02:00
Fredrik Arvidsson
37abf82fc2
OP-39 Added saving as image to the connection diagram dialog.
2012-09-10 22:37:39 +02:00
James Cotton
c97e3ddb3d
Merge branch 'usb_fixes' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/rawhid/pjrc_rawhid_mac.cpp
ground/openpilotgcs/src/plugins/rawhid/rawhid.cpp
2012-09-10 15:21:27 -05:00
James Cotton
38e9d105aa
Merge branch 'pidt1' into test2
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-10 14:37:52 -05:00
James Cotton
386a9d41ef
Merge branch 'next' into test2
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjecttemplate.m
2012-09-10 14:29:26 -05:00
PT_Dreamer
09f950ff76
GCS Fixes -clean-config command line argument segfault
2012-09-10 19:46:13 +01:00
Richard Flay (Hyper)
5b7fb6bcef
Minor improvement to GCS bias calibration logic, plus minor UI behaviour tweak
2012-09-10 22:22:36 +09:30
James Cotton
59dcbf5cb6
GCS OSX: More refinements to the USB code to make it more robust and work for reset/halt.
2012-09-10 02:04:59 -05:00
James Cotton
e027c25071
OSX USB: Add write and read mutexs to avoid closing mid write.
2012-09-10 00:32:40 -05:00
James Cotton
f8e5654ff4
Remove some comments
2012-09-09 23:45:04 -05:00
James Cotton
26ff40b5f3
GCS OSX: Work on how the receive threads are stopped properly
2012-09-09 23:43:38 -05:00
James Cotton
604e125251
GCS RawHID: Refactor the code to move most of the
...
functionality into one class. Removed support for
multiple open devices since we can just use multiple
classes.
2012-09-09 17:10:50 -05:00
Fredrik Arvidsson
b889035a24
Merge branch 'next' into thread/OP-39
2012-09-09 23:46:39 +02:00
Fredrik Arvidsson
d337fcf1d8
OP-39 Finished up motor/servo calibration, actuator settings.
...
Bug fixes after initial testing end2end testing.
I am making a note here: First successful 1-2-Fly! session ever!
2012-09-09 23:44:42 +02:00
James Cotton
741207ddc0
GCS OSX HID: Tweak the closing so that it doesn't crash. Still fails to unregister
...
the input callback.
2012-09-09 13:03:57 -05:00
James Cotton
8bb6a2600f
GCS Serial: Was double detecting USBCDC devices.
2012-09-09 11:40:14 -05:00
James Cotton
06fc1ed963
GCS USB: More the opening and closing code into the read
...
thread to simplify some threading issues on OSX. Should
not influence other operating systems.
2012-09-09 11:04:52 -05:00
PT_Dreamer
78a4241ba2
Merge branch 'pt/CC3D_Release' of ssh://git.openpilot.org/OpenPilot into pt/CC3D_Release
...
Conflicts:
ground/openpilotgcs/src/plugins/config/cfg_vehicletypes/configfixedwingwidget.cpp
ground/openpilotgcs/src/plugins/config/cfg_vehicletypes/configgroundvehiclewidget.cpp
ground/openpilotgcs/src/plugins/config/cfg_vehicletypes/configmultirotorwidget.cpp
ground/openpilotgcs/src/plugins/config/cfg_vehicletypes/vehicleconfig.cpp
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-09-09 13:04:29 +01:00
PT_Dreamer
ba575edbbc
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
...
OPReview 248
2012-09-09 12:30:09 +01:00
Dmytro Poplavskiy
4cc13c9eea
GCS/PFDqml: use the correct sceneSize for svg element images
...
Pass the element source size instead of the scene source size
to ensure the element is not downscalled.
2012-09-09 16:58:54 +10:00
chris pember
6a94cd49b5
reworked ALL the ui pages in windows so they work there, so pushing this for now, it just needs love in osx
2012-09-08 18:35:14 -07:00
James Cotton
b84f833287
GCS Uploader: Remove dialog about another board since it's
...
not used for any boards now.
2012-09-08 20:05:07 -05:00
James Cotton
44d271ac79
GCS USB: Get rid of some unnecessary code
2012-09-08 20:04:44 -05:00
James Cotton
cf1c986550
OSX USB: Close more handles properly
2012-09-08 19:48:33 -05:00
James Cotton
3f11c398db
GCS USB: Start with polling enabled so it acts like before and grabs first available USB device
2012-09-08 19:46:45 -05:00
James Cotton
1aadcf4e70
GCS USB: Make sure to fully unregister all the callbacks when disconnect.
2012-09-08 19:31:32 -05:00
James Cotton
9b7060a491
GCS USB: Increase the max timeout before giving up on stopping the USB threads.
2012-09-08 19:07:14 -05:00
James Cotton
82f752685a
GCS ConnectionManager: When polling is disabled don't automatically connect to boards either.
2012-09-08 19:06:03 -05:00
James Cotton
2ec8434941
OSX USB: Make sure to store the run loop handle before connecting the signals that can use it.
2012-09-08 16:06:01 -05:00
James Cotton
6840b8934b
GCS ConnectionManager: More cleaner code structure.
2012-09-08 16:05:51 -05:00
James Cotton
8e8cbd0b75
GCS ConnectionManager: Use some cleaner code coventions
2012-09-08 15:45:08 -05:00
James Cotton
19eaa77a15
Remove some comments and unused variables
2012-09-08 15:32:12 -05:00
James Cotton
65ef8a59b4
GCS ConnectionManager: Get rid of all the copies of various forms of the names and
...
store a handle to the IConnection::device and generate the appropriate names from
consistent functions.
2012-09-08 15:14:06 -05:00
James Cotton
1ca8abb3c8
GCS ConnectionManager: Properly check it is the active connection before closing it when a USB device is disconnected.
2012-09-08 14:31:16 -05:00