James Cotton
527edcbee9
RFM22b: Get rid of the burst read commands and do a block transfer
2012-09-08 12:39:14 -05:00
James Cotton
1f0004e9db
RFM22b: Abstract out the port into the driver initiation
...
Also use a separate function to claim the bus semaphore and
assert the CS line.
2012-09-08 12:38:54 -05:00
Stacey Sheldon
97882dbef9
pipx: ensure pipx BL image is padded to fill its bank
...
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
James Cotton
68fa464ccf
RM: Make the direction of the TX/RX lines come from the configuration file
2012-09-04 23:22:56 -05:00
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
James Cotton
844d14e2f5
RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping
2012-09-04 10:22:04 -05:00
James Cotton
0b947b243d
Revert "RFM22b: More block claims for rfm22_txStart"
...
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
2012-09-02 22:44:58 -05:00
James Cotton
dce4f36328
RFM22b: More block claims for rfm22_txStart
...
Warning: This patch makes the modem work more poorly
2012-09-02 22:44:58 -05:00
James Cotton
311bbcb539
RFM22b: Block transfers for more large SPI transfers
...
Preallocated buffers with various preambles etc. Used SPI_TransferBlock for
anything over a few bytes instead of burstWrite. Also make more of the
communications wrappered in a large semaphore grab using a new rfm22_write_noclaim()
Still needs work - probably because most of the methods to repeated calls they should
all use the noclaim, or more specifically that function becomes rfm22_write/read.
2012-09-02 14:35:56 -05:00
James Cotton
588297806c
RFM22b: Use SPI block transfers for filling the RFM22b FIFO
...
Also removed the disable irq line since that was introducing
flight glitches.
2012-09-01 21:24:42 -05:00
James Cotton
997319ae80
RFM22b: Begin doing blocks of transfers when possible between semaphore claims
...
The abstraction should probably be improved but ideally we start using
the DMA SPI transfers for PipX and grabbing/releasing the semaphore less
frequently (e.g. not for each 1-2 bytes).
2012-09-01 21:07:38 -05:00
James Cotton
d9ec6454c2
PipX: Since we are calling the PipX ISR from user space looks ensure the frequency stays correct.
...
Previously it was polling too fast and the PipXStatus was incorrect as a result. Now make
sure the stats loop only runs at 500 ms.
2012-09-01 19:13:11 -05:00
James Cotton
c9f66f5145
Merge branch 'revo' into revo-mini
...
Conflicts:
androidgcs/AndroidManifest.xml
androidgcs/res/layout/gcs_home.xml
androidgcs/res/values/strings.xml
androidgcs/src/org/openpilot/androidgcs/AttitudeView.java
androidgcs/src/org/openpilot/androidgcs/HomePage.java
flight/PipXtreme/System/pios_board.c
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-01 16:57:27 -05:00
James Cotton
6bfb2a5e45
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapgraphicitem.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapripper.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.h
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/coordinateconversions.h
ground/openpilotgcs/src/plugins/opmap/opmap.pro
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
shared/uavobjectdefinition/taskinfo.xml
shared/uavobjectdefinition/waypoint.xml
2012-09-01 16:18:03 -05:00
James Cotton
f3327e3993
RM: Enabled optional modules and got the battery module working again.
...
Changed the hardcoded (ick) battery lines for RM. Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available. Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
2012-09-01 11:03:32 -05:00
James Cotton
300cee44b4
RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off.
2012-08-31 11:01:34 -05:00
James Cotton
b888a137f0
TOFIX: Temporarily remove the transaction lock from the settings as it was causing a deadlock with the radio coms.
2012-08-26 05:02:14 -05:00
James Cotton
042055b29a
RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this.
2012-08-26 04:18:17 -05:00
James Cotton
f7cda1c0c4
RFM22b: No need to initialize the SPI. Done already.
2012-08-26 02:42:18 -05:00
James Cotton
477385ca25
RFM22b: Start to move the ISR into userspace
2012-08-26 02:41:19 -05:00
James Cotton
b1bd6d8583
PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration.
2012-08-26 00:00:39 -05:00
James Cotton
84d327c46a
RFM22b: Claim the bus semaphore before reading and writing.
2012-08-25 23:17:52 -05:00
James Cotton
2bb4f860e1
Shuffle around the PACKET_HANDLER definition so we can more easily disable the Radio module.
2012-08-25 22:58:11 -05:00
James Cotton
b95a78cde5
Roll back changes on the revo target
2012-08-25 17:33:14 -05:00
James Cotton
76bdb190d8
Link in the rfm module to the target
2012-08-25 17:27:17 -05:00
James Cotton
982750a58f
Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-08-25 15:05:47 -05:00
James Cotton
5c34412200
Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo-mini
2012-08-25 14:55:10 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
James Cotton
b9050809cc
Add a board info file for revo mini. However it was to remap the define MAINADAPTER for the HMC5883 driver which needs rewriting not to need this.
2012-08-25 12:57:50 -05:00
a*morale
789746151a
Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration
2012-08-25 11:29:01 +02:00
Stacey Sheldon
1f1b240b2a
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-08-20 21:22:02 -04:00
James Cotton
44dc01126e
Merge branch 'next' into revo
2012-08-12 16:12:54 -05:00
Stacey Sheldon
29ab1d8cf3
actuator: factor out settings updates from main loop
2012-08-11 19:46:00 -04:00
Stacey Sheldon
49c153003c
hid joystick: use linearly scaled channels
...
Scales each channel only based on max and min calibrated values.
The neutral value is now ignored so the joystick sees a linear
range between min and max.
This is particularly useful to allow the full range of values for
throttle to be passed through to the joystick.
2012-08-10 23:36:06 -04:00
Stacey Sheldon
07fde38887
hid joystick: factor out min/max range from report items
2012-08-10 23:29:34 -04:00
Stacey Sheldon
5902c19cc3
hid joystick: compress local usages since they're all in the same page
2012-08-08 10:38:43 -04:00
Stacey Sheldon
030d9e84f9
hid joystick: remove unnecessary usage page definitions
2012-08-08 10:15:08 -04:00
Stacey Sheldon
449c7aab7a
hid joystick: use 32-bits to represent max range
2012-08-08 00:50:03 -04:00
Stacey Sheldon
94f6344fc5
hid joystick: restructure joystick HID report to work on windows
2012-08-07 21:34:25 -04:00
Stacey Sheldon
017d8c79c9
hid joystick: add missing .c file
...
This time for sure...
2012-08-06 11:49:03 -04:00
Stacey Sheldon
d44e24a150
hid joystick: add missing .h files
2012-08-06 11:42:44 -04:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
James Cotton
652647fc87
Make autotuning module optional
2012-08-03 09:37:46 -05:00
Sambas
e59f99bc8e
Wave audio player test app.
2012-07-30 11:45:36 +03:00
Sambas
52c3627bb2
OSD uSDcard support, settings save/load works (tested on 128MB card). booting takes some time for some reason.
2012-07-30 11:45:22 +03:00
Sambas
ad0473e646
proper use of i2c transfer, return 0 is all ok, original code locked the transfer when all ok.
2012-07-30 11:41:25 +03:00
Sambas
79be7613b5
CC mag&baro for OSD, bmp needed some black magic hacking
2012-07-30 11:40:16 +03:00
James Cotton
f02aacfeb6
Change the constant so LED flashing works properly on Revo
2012-07-28 11:22:24 -05:00
James Cotton
735c009843
Disable writing to the overo driver for every pios_com write again. It drives
...
up system consumption too much, although now data will get lost :(.
2012-07-25 13:15:47 -05:00
James Cotton
30085d23ff
Reenable sending from the overo tx method but no longer yield since we aren't
...
using a blocking write anyway.
2012-07-24 11:29:24 -05:00
James Cotton
a90dd1ef5c
For now do not call PIOS_OVERO_WriteData from the Tx method because this is too
...
slow (task yield?) and results in a lot of event system errors.
2012-07-24 11:18:58 -05:00
James Cotton
26f07c21f6
Fix the pios_overo driver for compiling against the bootloader
2012-07-23 10:07:42 -05:00
Stacey Sheldon
f5db83bd20
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Libraries/inc/NMEA.h
flight/Modules/GPS/GPS.c
flight/Modules/GPS/NMEA.c
flight/Modules/GPS/UBX.c
flight/Modules/GPS/inc/NMEA.h
flight/Modules/GPS/inc/UBX.h
flight/Modules/PathPlanner/inc/pathplanner.h
flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
flight/SimPosix/UAVObjects.inc
ground/openpilotgcs/src/plugins/hitlv2/aerosimrc/src/qdebughandler.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/gpsvelocity.xml
2012-07-22 23:39:37 -04:00
James Cotton
c5904b4667
Clean up the pios_overo driver. Working well now.
2012-07-20 13:57:47 -05:00
James Cotton
bcdd5a8bba
Fixes to the overo module where it was thinking the fifo buffer writes failed
2012-07-20 13:45:31 -05:00
James Cotton
5091b16065
Needs work but it's sending data now
2012-07-20 11:36:49 -05:00
James Cotton
337f0e8bfa
Properly enable circular buffering on the overo spi
2012-07-20 10:59:18 -05:00
James Cotton
6a3c067c18
Zero out the packet counter when pios_over is initialized.
2012-07-20 10:45:20 -05:00
James Cotton
fb215fd095
PiOS overo driver wasn't setting it's id and also clearing the DMA IRQ flags
2012-07-20 10:17:57 -05:00
James Cotton
6b3e5573a0
The overosync module now uses pios_com interface.
2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6
Get the pios_overo driver for pios_com compiling
2012-07-20 09:32:22 -05:00
Kenz Dale
1d976b3095
dded support for multiple airspeed sources. Added GPS airspeed estimation. Extended BaroAirspeed UAVO. Added new AirspeedSettings UAVO.
2012-07-20 13:08:54 +02:00
James Cotton
1c4c373b86
Begin rewriting pios_overo to look like a standard com layer
2012-07-20 03:42:09 -05:00
James Cotton
7492d34d25
Merge branch 'overo_control' into revo
2012-07-19 08:35:39 -05:00
James Cotton
5ebd368b18
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
2012-07-19 08:35:30 -05:00
James Cotton
2f64124da8
Updates to the pios_overo driver to fully reinit the dma and spi device between
...
packets
2012-07-17 17:21:28 -05:00
James Cotton
db27653859
Make the Overo module use the new driver
2012-07-17 16:11:23 -05:00
James Cotton
a6ba379af9
PIOS_OVERO driver which handles the communications to the overo and ensures the
...
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
92a0311b32
New pios_overo driver that handles the SPI communications to the overo
2012-07-17 13:31:00 -05:00
James Cotton
719772c98a
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-07-16 11:42:29 -05:00
James Cotton
6b101d71af
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-07-15 12:32:35 -05:00
James Cotton
ce6bebceb6
Also strex needs to not clobber it's register to have predictable results.
...
OPReview-227
2012-07-14 19:47:03 -05:00
Michael Hope
fa3aa20e05
ld: make sure current pointer never goes backwards
...
Fixes linking on ld version 2.22. Identical to 3cbf4499
.
2012-07-14 19:47:03 -05:00
Michael Hope
0efb24a54b
The destination register of an exclusive store must be
...
different from both the value and address register. Fix building with
recent binutils by marking the result as early clobber.
2012-07-14 19:47:03 -05:00
James Cotton
8d4e221412
Remove the disable IRQ commands in PIOS_COM since they aren't needed.
2012-07-13 11:54:12 -05:00
James Cotton
d150fd5331
Merge branch 'next' into revo
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
ground/openpilotgcs/src/plugins/config/input.ui
ground/openpilotgcs/src/plugins/uavtalk/telemetry.cpp
shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-13 10:40:14 -05:00
Brian Webb
3fabdb9963
Fixed conflicted merge with origin/next.
2012-07-11 19:25:05 -07:00
Stacey Sheldon
54a161a3d4
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-08 18:14:09 -04:00
Laura Sebesta
0a34b786a9
Modified pios_adc.c to remove race condition by which the ADC value was reset to 0.
2012-07-08 22:23:05 +02:00
Laura Sebesta
4f20a0f9a1
Added drivers for analog airspeed sensors: MPXV5004 and MPXV7002.
2012-07-08 21:46:59 +02:00
Stacey Sheldon
2396eaef5a
uavobjectmanager: simplify new embedded metadata objects
...
Simplifies some of the code that handles the
metadata objects which are now embedded within
the data UAVOs.
2012-07-07 21:49:53 -04:00
Brian Webb
3405bc3ebe
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-30 10:06:51 -07:00
Brian Webb
10e52b31c5
Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration.
2012-06-30 10:06:28 -07:00
James Cotton
cd311642dd
Merge branch 'next' into revo
2012-06-28 10:35:47 +02:00
Stacey Sheldon
154d971d4d
flash: don't call vTaskDelay() before OS init
...
PIOS_Flash_Jedec_EraseChip is called during early
init when the table_magic has changed. This call
happens on CC/CC3D prior to the OS being initialized
so it is not OK to call vTaskDelay() yet.
This was leading to boards locking up (no flashing blue
LED) immediately after jumping to the application when
the table_magic had changed or was being init'd for the
very first time.
2012-06-24 12:23:34 -04:00
Stacey Sheldon
f475088585
Merge remote-tracking branch 'op-public/next' into revo-next
2012-06-20 22:45:41 -04:00
James Cotton
f8d196ffe8
Added support for board voltage monitor to battery module.
...
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.
Conflicts:
ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
shared/uavobjectdefinition/systemalarms.xml
2012-06-15 19:43:34 -05:00
James Cotton
01d47d6373
Accidental semicolon led to MPU6000 always failing self test. Another bug
...
masked that behavior. I suck.
2012-06-11 12:22:24 -05:00
James Cotton
a029fc4656
Merge branch 'next' into revo
...
Conflicts:
Makefile
2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0
More the system task priority down and increase the timeout for erasing the
...
flash so it says completed. However, it still blocks the system for a long
time. During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.
This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else. This should not be permited when the system is
armed.
The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread. It is very bad practice
for anything to block this (i.e. callbacks should never take very long). We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
821a25e419
For now make the F4 PIOS_ADC return an error code if there is no new data in
...
the ADC buffer. This should be handled appropriately by the caller.
2012-06-11 09:22:04 -05:00
Stacey Sheldon
c73cffce59
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
Makefile
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/System/inc/pios_config.h
package/Makefile
Fixed CRLF line end clobbering in:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/Common/pios_usb_util.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/inc/pios_rfm22b_priv.h
flight/PiOS/inc/pios_usb_util.h
2012-06-10 19:01:11 -04:00
James Cotton
f5845cb037
Fix self test for MPU6000 so it returns negative values per our standard
2012-06-09 11:18:14 -05:00
James Cotton
f5b2575c88
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/System/inc/pios_config.h
package/Makefile
2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457
Merge branch 'MikeL' into next
2012-06-07 11:31:41 -05:00
James Cotton
c689bcfb80
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-07 09:49:18 -05:00
Brian Webb
861bcc46fe
Fixed RSSI reporting on PipX.
2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68
Further improvements in link reliability on the PipX.
2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd
Merge branch 'next' into MikeL
...
Conflicts:
ground/openpilotgcs/src/plugins/config/airframe.ui
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d
Improved lockups on dropped packets.
2012-06-05 21:10:32 -07:00
Brian Webb
25fe50e9b1
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
9f93c9cbec
Get PIOS_GCSRCVR working on revo
2012-06-04 09:48:05 -05:00
James Cotton
9707c6152a
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-03 19:13:01 -05:00
James Cotton
71e14a691e
Merge branch 'next' into revo
2012-06-03 19:00:51 -05:00
James Cotton
e8cf606f16
Add the chip size to the flashfs configuration (should probably go in the chip
...
configuration)
2012-06-02 11:00:42 -05:00
Sambas
06a814c8a9
Fixing most warnings from osd fw
2012-06-02 15:52:38 +03:00
Sambas
d6216cf02b
Graphic features and cleanup
...
osdinput module back to irq based usart
2012-06-02 12:46:09 +03:00
Brian Webb
df8a5f8f27
Changed update period for PPM inputs on the PipX. Fixed LED code.
2012-05-31 18:56:07 -07:00
James Cotton
ed2b9f1f63
Make PIOS_LED init it's GPIO clocks so it doesn't rely on startup code
2012-05-30 10:12:40 -05:00
Sambas
ed1a4dada6
Merge remote-tracking branch 'remotes/origin/sambas/osd_test_v1' into revo-next
...
Conflicts:
flight/PiOS/STM32F4xx/pios_adc.c
2012-05-30 16:30:09 +03:00
Sambas
e72e913e02
F4 cpuid fix, RM says flash size comes from same base address. who knows?
2012-05-29 22:17:31 +03:00
Sambas
7f1e392e83
some graphic fixes and ntsc defines
2012-05-29 17:55:30 +03:00
James Cotton
564c442ac8
Remove some code from Zippe that used a timer to trigger the ADC. We might do
...
this again in the future but we need to generalize the configuration. For now
the ADC is fairly simple requirements on revo for battery monitoring.
2012-05-28 20:28:48 -05:00
Sambas
147100bc2f
Merge remote-tracking branch 'remotes/origin/revo-next' into osd_test_v1
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-05-28 19:06:25 +03:00
James Cotton
8a6073fbaf
Merge remote-tracking branch 'revo/revo-next' into testing
...
Conflicts:
Makefile
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
flight/Revolution/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-05-28 09:13:26 -05:00
Corvus Corax
978ab5b96c
Merge remote branch 'origin/stac/etasv3' into revo-next
2012-05-28 12:56:27 +02:00
Stacey Sheldon
5c114aedd5
pipx: apply fixes that allow pipx to build with new gcc
2012-05-27 21:38:33 -04:00
Stacey Sheldon
c719d5b6cf
f4 adc: allow PIOS ADC to be properly excluded from the build
...
This was preventing the BL image from building
2012-05-27 21:36:56 -04:00
Stacey Sheldon
33e7e775c7
Merge remote-tracking branch 'op-public/next' into revo-next
2012-05-27 20:39:58 -04:00
Sambas
7eefe83335
Cleanup and fix
2012-05-26 13:38:01 +03:00
James Cotton
5a6e02a688
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-05-25 20:37:23 -05:00
Sambas
a9cfc4a0af
*float sprintf
...
*h/v deadbands
2012-05-25 21:12:03 +03:00
Brian Webb
b824c87056
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01
Tuning configutation of PipX.
2012-05-24 18:08:29 -07:00
Brian Webb
a434688b42
Zero out watchdog register on init.
2012-05-24 18:04:42 -07:00
Sambas
a3b9451bcd
Merged some stuff to make original hardware work better
2012-05-24 20:14:15 +03:00
James Cotton
b3150500d5
Change the buffers to byte buffers and update most of the drawing code to use
...
it accordingly. Large fonts broken.
2012-05-24 18:25:09 +03:00
James Cotton
fef6567cff
Clock the SPI device with bytes. Image is now totally stable.
2012-05-24 18:23:05 +03:00
James Cotton
8411b9cc98
Remove the disable IRQ commands in PIOS_COM since they aren't needed.
2012-05-24 18:04:49 +03:00
Stacey Sheldon
dff43d5156
board_info: add guard for multiple includes of .h file
2012-05-22 21:50:53 -04:00
Brian Webb
8b98d48fc4
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-22 06:27:45 -07:00
Stacey Sheldon
dab400c80d
usb: decouple "available" from "cable connected"
...
The bootloader needs to understand whether the USB cable
is connected. The HID and CDC drivers need to know if
the cable is connected _and_ the device has been enumerated
already. Separate these two concepts in the API.
Combining these was resulting in the BL not properly
detecting that the cable was plugged in, and trying to boot
the firmware image immediately. This effectively bricked
the board if you ever had an invalid firmware image.
It also happens to be the case that the BU images automatically
invalidate themselves after updating the BL so they don't run
again. The cable detect bug + this intended behaviour of the
BU image resulted in a bricked board after upgrading the BL.
2012-05-22 00:21:24 -04:00
Brian Webb
6cb13aa2ba
Fixed failed merge with next.
2012-05-20 18:36:08 -07:00
Brian Webb
2f1a9e3e7d
Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout.
2012-05-20 18:30:37 -07:00
Stacey Sheldon
d7d670036b
usb: make sure USB device is off limits until it has been init'ed
...
USB device was being accessed prior to being initialized.
This resulted in a hard-fault or NMI when using any endpoint
beyond 0 or 1 which are init'ed by the BL. This broke VCP which
is on endpoint 2 (control) and 3 (data).
This bug was introduced in 5ad37e69
which stopped checking the
transfer_possible variable.
2012-05-20 13:28:16 -04:00
Stacey Sheldon
698ea8e86e
usb util: Add common utility functions for USB descriptors
...
Make a home for generic functions related to USB.
2012-05-19 16:14:10 -04:00
Stacey Sheldon
3e0a9bc47e
usb: Change supported LANGID in USB descriptor to be English US
...
Some versions of Windows will ignore the USB device serial number
if the string is not delivered with LANGID = English US 0x0409.
This is true regardless of the configured locale of the machine.
2012-05-19 16:12:34 -04:00
Stacey Sheldon
b905607dc7
serial: use defines for serial number lengths
...
Use #defined sizes for returned serial number lengths instead
of hard-coded values.
2012-05-19 16:06:48 -04:00
Stacey Sheldon
ba8d60301c
usb: remove run-time selectable device descriptors
...
BL images now always use hid-only.
FW images can use hid-only or hid+vcp but this is selected
ONLY at compile time based on whether PIOS_INCLUDE_USB_CDC
is defined.
CC uses HID+VCP by default now.
2012-05-19 16:06:48 -04:00
Stacey Sheldon
48cb20dc81
hid+vcp: change default USB descriptor to HID+VCP
...
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.
VCP is known to not work on WinXP without service pack 3.
2012-05-19 16:06:30 -04:00
zedamota
eb83afdcf1
Working compliant VCP+HID descriptors for Windows.
2012-05-19 15:40:46 -04:00
Brian Webb
00a83f3984
Reverted change to link_STM32103CB_PIPXTREME_memory.ld
2012-05-18 19:08:44 -07:00
James Cotton
af8d65616e
Comment out some unused variables in the PIOS_ADC structure for now since they
...
were consuming lots of memory. Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
2012-05-15 03:48:32 -05:00
James Cotton
bbb14f5f14
Trying to get F4 PIOS_ADC working. Changed from previous implementation timed
...
by another timer to running continuously. May go back to the previous since no
need to get tons of data.
2012-05-15 03:19:44 -05:00
Brian Webb
563b454693
Fixed compiling of PipX bootloader.
2012-05-13 20:19:04 -07:00
Brian Webb
ec67742ff6
Added configuration of COM ports on PipX.
2012-05-12 13:16:36 -07:00
James Cotton
65065f2588
Fix the ADC code on the BL for revolution
2012-05-12 13:12:56 -05:00
James Cotton
848f1b0e29
For some reason the gyro needs 300 ms after reset in order to work after the
...
bootloader jumps to code. Nothing in datasheet to imply what.
2012-05-12 13:00:51 -05:00
Brian Webb
1f5dbcf57c
Mostly complete PipX configuration GUI.
2012-05-11 17:51:18 -07:00
James Cotton
0f2c41ac5d
Merge branch 'revolution' into navigation
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-05-07 21:53:10 -05:00
Sambas
dedbbec8f0
Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board.
...
USB interrupt fix.
Heap warning critical sizes backwards.
2012-05-07 12:51:07 -05:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
3cf4fe6512
Reverted some USB changes.
2012-05-05 10:10:40 -07:00
Brian Webb
480371a43e
Resolving merge with origin/next
2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
James Cotton
513c36f19a
Update the F4 ADC to compile again. Still not fully compliant with API but
...
then again API is not great and unused currently so no rush.
2012-05-04 21:37:46 -05:00
James Cotton
3155324384
Merge branch 'next' into cc3d
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
shared/uavobjectdefinition/ahrscalibration.xml
shared/uavobjectdefinition/ahrssettings.xml
shared/uavobjectdefinition/attituderaw.xml
2012-05-03 16:31:49 -05:00
Brian Webb
8da4b9c745
Merge remote-tracking branch 'origin/stac/pt-win-vcp-fix' into Brian-PipXtreme-V2
2012-05-02 06:42:30 -07:00
Brian Webb
290acf0398
Fixed watchdog timeouts.
2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37
Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling.
2012-05-01 19:14:58 -07:00
James Cotton
3f63051df8
PiOS ADC: This could still use a lot of cleanup and needs to be implemented in
...
the non-FreeRTOS case but now the ADC device is allocated dynamically which
means CC3D won't waste heap on it.
2012-05-01 11:11:31 -05:00
Brian Webb
84a19ebeab
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-04-28 19:30:35 -07:00
Brian Webb
25ffb99cee
Added initialization of flash eeprom for saving settings to PipX.
2012-04-28 19:29:56 -07:00
Brian Webb
1048eb7e2c
Added pios_eeprom for saving settings.
2012-04-28 19:29:25 -07:00
James Cotton
f06439ecf5
Fix a bug in calculating air temperature in baro sensor when it goes below 20
...
deg C.
2012-04-22 18:43:07 -05:00
Stacey Sheldon
2ec197298b
gpio: stop enabling pull-ups on all GPIOs in bootloader
...
The bootloader has been enabling pull-ups on all GPIO
pins during early init. These pull-ups are disabled
immediately before jumping to the firmware. This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
2012-04-22 18:42:53 -05:00
Stacey Sheldon
14cc9ef57c
ppm: adjust min frame pulse width for 8ch x 18ms frames
...
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.
With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels. Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.
Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
2012-04-22 18:42:45 -05:00
Brian Webb
f726cc6a9d
Added a RTC supervisor timer to RFM22B driver.
2012-04-21 18:31:49 -07:00
Stacey Sheldon
41d4ba4b1a
hid+vcp: change default USB descriptor to HID+VCP
...
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.
VCP will is known to not work on WinXP without service pack 3.
2012-04-20 08:39:04 -04:00
zedamota
4968df183a
Working compliant VCP+HID descriptors for Windows.
2012-04-20 08:38:24 -04:00
Corvus Corax
d125abf335
Baro calibration
2012-04-18 10:48:31 +02:00
Brian Webb
62c5036220
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
2012-04-17 17:36:05 -07:00
Corvus Corax
3da88601a1
Airspeed module works, needs conversion
2012-04-17 20:32:56 +02:00
Corvus Corax
c5a6ed7486
add missing headers and makefile entries
2012-04-17 16:25:39 +02:00
Stacey Sheldon
6a37e433b6
etasv3: Add driver for Eagle Tree Airspeed Sensor v3
2012-04-17 09:39:00 -04:00
Stacey Sheldon
853600a2ef
i2c: enable flexiport i2c on revolution
2012-04-17 09:38:27 -04:00
Stacey Sheldon
62fb009acd
gpio: stop enabling pull-ups on all GPIOs in bootloader
...
The bootloader has been enabling pull-ups on all GPIO
pins during early init. These pull-ups are disabled
immediately before jumping to the firmware. This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
2012-04-16 14:41:25 -04:00
Stacey Sheldon
5ca4ec7934
ppm: adjust min frame pulse width for 8ch x 18ms frames
...
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.
With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels. Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.
Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
2012-04-16 14:33:28 -04:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
Brian Webb
e639d173a0
Create ID from a hashed CPU serial number.
2012-04-07 19:41:23 -07:00
Brian Webb
7b49a6b820
Added watchdog to radio com bridge in PipXtreme.
2012-04-07 19:12:49 -07:00
Brian Webb
0f9f897870
Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream.
2012-04-07 18:17:32 -07:00
Sambas
d399469b88
Last push before summit
2012-04-07 14:30:04 +03:00
Brian Webb
56a2006fd8
Reconfigured to run on the real PipX board.
2012-04-06 18:44:31 -07:00
Brian Webb
eeb96955f9
Fixed ADC configuration
2012-04-06 17:43:43 -07:00
Brian Webb
bc1adb2519
Some cleanup of rfm22 driver.
2012-04-06 17:36:35 -07:00
James Cotton
6c004678d5
Need a really big telemetry queue size on revo for object manager not to choke.
...
Probably should slow down how quickly AltHoldSmoothed is set.
2012-04-06 13:22:30 -05:00
Brian Webb
fff93910e2
RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module.
2012-04-05 20:24:50 -07:00
James Cotton
c8ceea72e6
Increase the telemetry queue size from revolution
2012-04-03 03:42:32 -05:00
James Cotton
e82323af32
Make revolution work with the FreeRTOS queue based MPU6000 driver
2012-04-03 03:41:52 -05:00
James Cotton
d7cb232315
Add MPU6000 accel range to config structure. Also put in correct values.
2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6
MPU6000 accel value coming out twice as high as it should. Need to store scale
...
in cfg structure to fix this properly.
2012-04-03 02:07:04 -05:00
James Cotton
a960f3d07e
Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code
...
to take advantage of this.
2012-04-03 02:07:03 -05:00
James Cotton
1415728762
Get the MPU6000 CC3D working. Right now the ADC system is commented out, which
...
will break regular CC.
2012-04-03 02:07:03 -05:00
Stacey Sheldon
eab923fee0
revo: move fw image into 128KB sectors
...
This saves the more versatile 16KB and 64KB sectors
for other purposes.
2012-03-28 21:52:43 -04:00
Stacey Sheldon
91cffb1809
f4 usb: don't skip yield from ISR
...
Function was returning prior to the code that might
need to yield from within the ISR.
2012-03-27 00:18:44 -04:00
Sambas
4c6ee740e2
Merge remote-tracking branch 'remotes/origin/james/revolution' into osd_test_v1
2012-03-25 14:28:25 +03:00
Stacey Sheldon
730defb698
f4 flash: fix flash voltage range setting in bl_helper
...
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3. Fix this to match actual VDD so we
get faster erase/write times.
2012-03-22 22:37:31 -04:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
Brian Webb
823b111d60
Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode ( http://rscode.sourceforge.net ). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX.
2012-03-18 17:43:29 -07:00
Brian Webb
ecdf150946
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
2012-03-18 10:22:05 -07:00
Brian Webb
78b622a8d8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into PipXtreme
2012-03-15 19:31:18 -07:00
Brian Webb
b34b849453
Added start at a modified PipX packet handler.
2012-03-15 19:29:54 -07:00
Sambas
4afe0e7c92
usb interrupt fix
2012-03-12 18:26:23 +02:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
Sambas
2ca27b0a27
USB and bootloader stuff, WORKS!!
2012-03-11 12:04:44 +02:00
Sambas
742f3ff24d
Merge remote-tracking branch 'remotes/origin/james/revolution' into osd_test
...
Conflicts:
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-11 09:39:51 +02:00
Sambas
ccf5c310c9
Updates
2012-03-11 09:27:38 +02:00
Stacey Sheldon
3782cdc58e
bu: drop CC and PipX from BU targets since they don't build
...
The CC and PipX bootloader updater (BU) builds don't currently
work due to some recent changes in how LEDs are handled.
Remove them from the default BU targets so that the all_flight
target can build clean again.
Also fix a linker warning in OP build.
2012-03-10 20:41:15 -05:00
Stacey Sheldon
3210bd3f9c
f4 usb_dcd: disable FIFO empty IRQ while waiting for tx completion
...
CPU was being hammered with FIFO empty IRQs if we queued data but
the host wasn't actively draining the FIFO.
This was entirely unexpected so this hack should probably be
removed once we can figure out why this was happening.
This is almost certainly hiding some other issue.
2012-03-07 20:36:37 -05:00
Stacey Sheldon
c4bd286739
f4 usb_hid: track whether we have buffers queued on endpoints
...
Make sure we don't clobber our endpoint configuration by
double configuring an Rx or Tx buffer against it. Wait for
the completion of the previous operation before allowing
endpoint configuration again.
2012-03-07 20:36:36 -05:00
Brian Webb
d73895de7d
Working PipX com relay.
2012-03-07 18:05:42 -07:00
Stacey Sheldon
65fc6104e6
f4 usb_hid: ignore upper layers if USB IF not yet enabled
...
Upper (COM) layer was calling down into the HID layer before
the HID interface had been enabled. This was leading to
interacting with the endpoint Rx and Tx FIFOs prior to init.
The FIFO config was then being clobbered when we the USB IF
was eventually enabled.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
1f37806eab
f4 usb_hid: fix typo in EP IN registration call
...
Code was using the size of the Rx buffer instead of the Tx
buffer when registering. Buffers are currently the same
size so wasn't causing any issues.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
bc3ee6209c
f4 usbhook: drop in/out bit from EP numbers before using as index
...
USBHOOK endpoint callback arrays should not be indexed with the
0x80 (in/out) bit set. Oops.
2012-03-07 20:01:35 -05:00
Stacey Sheldon
6832a62872
f4 bl_helper: clear all flash errors as we unlock the flash
...
Error flags being set were causing flash erase operations to
fail. Not sure why these flags were set though so this might
be hiding some other problem.
2012-03-07 19:53:18 -05:00
Stacey Sheldon
4ea1156e7b
f4 bl_helper: teach bl_helper about f4 flash sector map
2012-03-07 19:53:17 -05:00
Stacey Sheldon
d1d123e4f6
revo bl: turn on USB and add support for OP DFU protocol
2012-03-07 19:53:17 -05:00
Stacey Sheldon
c854c3f4a4
usbhook: add support in API for deactivating USB
2012-03-07 19:53:17 -05:00
Stacey Sheldon
cb9c3a9b7e
usbhook: delete dead code
...
Remove old code left-over from porting from F1 to F4.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
fdf54ab86c
hid: fix response to HID descriptor
...
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor. This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
2012-03-07 19:52:54 -05:00
Sambas
91a9e45888
Updates, first UAVtalk client test
2012-03-05 19:53:52 +02:00
James Cotton
7961aba83c
Clean up a few more compiler warnings
...
Conflicts:
flight/PiOS/Common/pios_ms5611.c
2012-03-03 13:32:56 -06:00
James Cotton
bc8b72623e
Get rid of some unused variables
2012-03-03 11:54:09 -06:00
James Cotton
f20e5da9ed
Merge branch 'next' into revolution
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configrevowidget.h
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
James Cotton
72a93dbae5
Fix from PT for OSX/Windows F4 USB HID to send the full report size even if not
...
all used.
2012-03-02 11:11:36 -06:00
Brian Webb
a0bdc58e5b
Added framework for rfm22b com device.
2012-02-28 21:30:06 -07:00
Brian Webb
992aa3bec6
Updated PipX branch to use CDC device with a VCP (not working yet).
2012-02-25 09:07:37 -07:00
Brian Webb
01f314724b
Updates to USB configuration on the PipXtreme.
2012-02-24 15:54:26 -07:00
Brian Webb
483a96c31d
Some more cleanup to PipXtreme codebase.
2012-02-24 07:49:41 -07:00
Brian Webb
b69b285f58
Fixed PipXtreme bootloader.
2012-02-23 20:40:24 -07:00
Brian Webb
182f285e60
Added missing startup file for PipXtreme.
2012-02-23 20:06:34 -07:00
Brian Webb
cf34baec69
Some cleanup on PipXtreme codebase.
2012-02-23 19:58:23 -07:00
Brian Webb
f0dfba6fc0
Re-baslined the PipX codebase using the experimental Transmitter codebase.
2012-02-21 20:29:06 -07:00
Sambas
ebd2ae7e59
Bootloader, copy from revo, not functional
2012-02-18 22:35:13 +02:00
Sambas
8f45114b1f
Fixes & cleanup
2012-02-15 21:14:02 +02:00
Sambas
0bc08a48d8
cleanup 'n' updates
2012-02-14 21:42:09 +02:00
James Cotton
d018d93e88
Clean up previous commit a bit and make the sampling rate a variable (and adapt
...
the sampling time accordingly).
2012-02-13 01:49:54 -06:00
James Cotton
3acbfbe96c
Convert the pressure sensor code to most of the calculations as int64 to retain
...
precision.
2012-02-13 01:22:48 -06:00
Sambas
8cc876d02a
OSD branch
2012-02-12 22:29:42 +02:00
James Cotton
d8f0494e57
Merge branch 'revolution' into revolution_overo
2012-02-11 20:02:20 -06:00
Alessio Morale
22b211167c
Ported pios_iap.c to F4
...
restored failed boot count check on pios_board.c for revo
2012-02-11 13:49:32 +01:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
Stacey Sheldon
3c1b1001f9
f4 usb: Allow USB descriptors to be const through ST APIs
2012-02-07 02:25:31 -05:00
Stacey Sheldon
56102013aa
f4 usb: correct function prototypes in bsp template
...
This file is not actually used but it should still be accurate.
2012-02-07 02:25:31 -05:00