rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
4,244 Commits 5 Branches 8 Tags 266 MiB
7ee4a0412c
Commit Graph

302 Commits

Author SHA1 Message Date
James Cotton
9607da9c62 Add some drivers to the device specific library for now until the exti problems 
are fixed
 2011-11-01 03:19:58 -05:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-10-26 13:18:44 -05:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes 
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
 2011-10-22 00:44:09 +03:00
Oleg Semyonov
92b81e3f88 sbus: refactor the code using unified PIOS RCVR driver structure 
- allow more than one S.Bus receiver (needs hardware support)
- use dynamic memory allocation (frees around 72 bytes of RAM when unused)
 2011-10-20 18:23:23 +03:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
Oleg Semyonov
f5369f9338 Input Configuration: support all 18 S.Bus input channels 2011-09-12 02:06:50 +03:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
d7ea1fc306 PiOS I2C: Swap the expected return value of the F2 pios i2c calls 2011-09-08 01:32:27 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
James Cotton
82c5f9f0f4 PIOS_RCVR: Document return values better and use enum for them 2011-09-04 12:37:39 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make 
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
 2011-09-03 23:50:56 -05:00
James Cotton
dae11cf877 INS Logging: Enable temperature reading from gyro and accel (may be removed in 
future), push it into UAVO and introduced a logging mode for INS that outputs
all sensor data from aux port.
 2011-09-03 15:10:47 -05:00
James Cotton
c40e5800ab BMA180: Enable the EEPROM writing on startup so settings take the first time. 2011-09-02 13:28:36 -05:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together 
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
 2011-08-27 21:39:56 -04:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-27 15:26:05 -05:00
James Cotton
5f7a9b513a Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next 
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-24 11:37:30 -05:00
James Cotton
b1c522def3 Merge remote-tracking branch 'origin/next' into ins 2011-08-21 01:34:40 -05:00
James Cotton
38d9df8fcb HMC5883: Clean up the mag driver 2011-08-21 01:29:55 -05:00
James Cotton
e1afc9a19a Merge branch 'next' into ins 
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-21 00:47:43 -05:00
James Cotton
af69e0a1a8 BMA180 driver; Don't externalize the fifo buffer but handle it in the driver 
layer.  General driver cleanup.
 2011-08-21 00:40:10 -05:00
James Cotton
8ae53a4f97 PiOS: Cleanup IMU3000 driver a fair bit. 2011-08-21 00:39:20 -05:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
James Cotton
3465eb2f30 PiOS F2 I2C: Add a callback based transfer. This needs merging into the main 
transfer function like SPI but I will leave that for now to avoid creating a
lot of changes in the main code.
 2011-08-19 13:38:11 -05:00
James Cotton
7444337418 F2 PiOS I2C: Add a poor man semaphore here in case we start calling I2C 
transfers from IRQ.  Also catch the double 0x70084 event which was locking up
the FSM with -Os enabled.  I did this in a cheating way (filtering the event
based on state) but it's the cleanest I can see.  Hopefully a DMA version of
I2C will fix this.
 2011-08-19 11:39:50 -05:00
James Cotton
c7034ef8a6 IMU3000: Fix a constant that made the sampling rate 1kh instead of 8 internaly. 
No downsample that (in IMU3000) by 8 to get gyros at 1khz.  Well about 256 Hz
nyquist and shouldn't cause substantial issues for EKF.
 2011-08-18 13:01:51 -05:00
James Cotton
bdb9dc0a54 BMA180: Use DMA for getting the accels and use callback to push it onto the 
stack.
 2011-08-18 12:51:22 -05:00
James Cotton
3b6ffc8afa PiSO SPI: Implement a poor mans semaphore for non-freertos systems. 2011-08-18 12:51:00 -05:00
James Cotton
294e0cbdff IMU3000: Change IMU3000 api right now so it only reads one element from the 
fifo but swaps the endian appropriately.
 2011-08-18 11:03:56 -05:00
James Cotton
11ac0707da BMA180: Reset BMA180 chip at reconfiguration. 2011-08-17 06:49:56 -05:00
James Cotton
35eef66bfe OP-557: Add a UAVO access method to erase the entire flash chip. Normally not 
needed by users because if too much changes I change the FS magic and trigger a
wipe.

Possibly the erase should require a particular "magic" object id value to
execute?  This would make it harder to do manually through UAVOs though.
 2011-08-15 10:33:27 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
 2011-08-14 15:48:16 +01:00
James Cotton
80c2d45d93 Fix the BMP085 interrupt handler and get it producing data. Driver needs some 
work to abstract away the actual calculation of altitude from pressure and
temperature.
 2011-08-13 20:49:07 -05:00
James Cotton
a2b76adc33 Attitude: Do not start attitude estimation until accel data appears. This 
fixes the NaN when AttitudeSettings not available.
 2011-08-13 18:53:42 -05:00
James Cotton
62f51fc92d Some improvements to the HMC5883 driver. Still getting funny values but I 
suspect the chip at this point.
 2011-08-13 11:20:32 -05:00
James Cotton
f82e5dde33 Fix the EXTI IRQ handlers 2011-08-13 07:13:21 -05:00
James Cotton
1d1f351233 Pios Delay: Add function for measuring time difference between two cycle counts 2011-08-12 04:29:53 -05:00
James Cotton
f247112090 PiOS F2: Move IMU3000 to device dependent :(. Now they all are. Need to 
abstract as much as possible out since init is almost identicalc and protocol
COULD be device independent.
 2011-08-12 03:38:45 -05:00
James Cotton
8c1dd7b929 Make BMP085 driver device dependent and update to new driver style. 2011-08-12 03:38:45 -05:00
James Cotton
9d76efa2aa Move BMA180 driver to common architecture style. 2011-08-12 03:38:45 -05:00
James Cotton
1dc08e5cf7 F2 PiOS: Small fix to hmc5883 driver 2011-08-12 03:38:44 -05:00
James Cotton
6310f46705 HMC5883: Update driver for F2. Move to STM32F2xx directory since it is device 
dependent.  Abstract configuration out of board.h file into a standard board.c
structure.
 2011-08-12 02:26:51 -05:00
James Cotton
9c7799dfe6 UAVObject Init: Get rid of deprecated linker init code 2011-08-10 22:48:42 -05:00
James Cotton
0c2c48bee6 F2 PiOS: More changes for spi to work (not completed) 2011-08-09 12:59:10 -05:00
James Cotton
a097ff784b F2 PiOS: Getting the I2C driver working again (copying changes from Zippe, 
thanks again man!)
 2011-08-09 12:58:46 -05:00
James Cotton
479ba7c21f OP-378 INS: Continue getting F2 INS to compile 2011-08-08 08:36:40 -05:00
James Cotton
d1c9ac0705 PiOS F2: Commit the F2 port of PiOS from Zippe. Thanks for doing all the hard 
work man :-D
 2011-08-06 19:36:56 -05:00
James Cotton
0bba13a0e9 Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/INS/pios_board.c
	flight/Modules/Altitude/altitude.c
	flight/PiOS/Boards/STM3210E_INS.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_BL_sections.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_BL.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_NB.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_memory.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-06 17:25:56 -05:00
sambas
1e67b5e3b5 DSMx_binder, hw setting 0 disabled, 1-10 bind pulses. Manual disable after successful bind. Only for flexiport. 2011-08-06 22:16:47 +03:00