rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
4,735 Commits 5 Branches 8 Tags 266 MiB
7f38d113eb
Commit Graph

2277 Commits

Author SHA1 Message Date
James Cotton
cd65df013e Merge branch 'next' into revolution 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-11-26 22:52:32 -06:00
James Cotton
13729f854e PiOS F4: Fix PWM timer interrupts and enable PWM input 2011-11-26 22:41:41 -06:00
James Cotton
21367d3a22 Spektrum support for Revolution 2011-11-26 22:19:42 -06:00
James Cotton
e24c905ff7 F4 PiOS: Reimplement the RTC logic for F4 2011-11-26 22:13:57 -06:00
James Cotton
b11a4f7405 Clean up the actuator module for floating point usage. Also there was a bug I 
don't understand where the channels should be scaled AFTER all of them are
computed.  It feels like a memory overwriting bug and needs followup.
 2011-11-26 16:12:32 -06:00
James Cotton
07e3ad10af Force some floating point units to be safe 2011-11-26 15:52:25 -06:00
James Cotton
04f4afce46 Set idle load for revo 2011-11-26 15:52:04 -06:00
James Cotton
8c0db424fa Fix long subtle bug where failsafe didn't show the output values it was using 2011-11-26 15:51:24 -06:00
James Cotton
c70a9a5381 Sanitize the floating point math in systemmod.c to be consistently floating and 
not double
 2011-11-26 15:16:16 -06:00
Oleg Semyonov
1f60f80053 Bring back the ERASE_FLASH option support for SettingsEraseFirmware 2011-11-26 22:57:33 +02:00
James Cotton
d3314f041a MPU6000: Bring SPI down to 5 Mhz - much closer to spec 2011-11-26 14:56:28 -06:00
James Cotton
99123372d0 TO BE REVERTED: Temporary patch to make the w25x driver work with the revo m25p 
chip.  Need to abstract out the erase commands into a general pios_spi_flash
driver.
 2011-11-26 14:55:16 -06:00
James Cotton
8b7aca0dcd Include the accel bias into revolution attitude function and also make sure 
downsampling is correct.
 2011-11-26 14:40:32 -06:00
James Cotton
11ad135b27 Some changes to MPU6000 driver to make it start more reliably on fresh powerup 2011-11-26 14:12:12 -06:00
James Cotton
1574c96c3a Add all the pin remappings and pin sources for F4 timers 2011-11-26 03:36:36 -06:00
James Cotton
c57acf6459 F4 PiOS: Must use a different remap command on F4 for timer module to command 
pin.  Include the remap source in the config structure now.
 2011-11-26 03:35:26 -06:00
James Cotton
57b381235e Init the timers and PWM in the board file 2011-11-26 02:19:56 -06:00
James Cotton
de9a8453ef Configure the board to use PWM input and servo output 2011-11-26 02:19:56 -06:00
James Cotton
3e01c84a15 Add pin mappings for PWM and receiver port 2011-11-26 02:19:56 -06:00
James Cotton
e71030c6ce Remove testing code for pressure sensor 2011-11-26 02:19:56 -06:00
James Cotton
c118159a6f Remove refence to deleted object 2011-11-26 02:19:55 -06:00
James Cotton
fae611a01f Fix bug where clicking back at last screen of input wizard would go back to 
main screen and then in future buttons hung around for no reason
 2011-11-25 11:30:12 -06:00
Oleg Semyonov
6d78b97d92 dsm: update DSM protocol binding details in the comments (no code change) 2011-11-19 17:33:04 +02:00
James Cotton
7637e9f669 Get flash chip working and saving to memory. Also get the I2C working with 
BMA180 driver.
 2011-11-19 00:13:02 -06:00
James Cotton
da75e9fdaf PiOS: Make I2C return an error code for NACK 2011-11-19 00:11:16 -06:00
James Cotton
a7ef5601e0 Update the MPU6000 FIFO code and also fix the temperature code 2011-11-18 00:24:55 -06:00
James Cotton
6d74e96c31 Got attitude working again. MPU6000 FIFO reading needs a bit of work. 2011-11-18 00:00:55 -06:00
James Cotton
79730d5afa Try and get the MPU6000 buffer to run down. Staying high for some reason. 2011-11-17 11:23:31 -06:00
James Cotton
0efffef1fa Work on bringing the Revolution board up 2011-11-17 10:13:34 -06:00
James Cotton
d97e5dbc59 Add SPI MPU6000 driver. Unfortunate hack in HMC5883 EXTI handler to call 
MPU6000.  Need to generalize EXTI ASAP.
 2011-11-17 10:12:10 -06:00
James Cotton
8477c2229b Using real prototype board now. Move telemetry to GPS port for easy-ness right 
now.
 2011-11-17 01:58:51 -06:00
James Cotton
1c7c85635d Typo with renamed PI 2011-11-16 19:48:13 -06:00
James Cotton
1deb799b6f Get simple attitude estimation working on F4 INS. Also make MPU6050 return 
scaling that casts to degrees.
 2011-11-16 11:36:04 -06:00
James Cotton
8e79f86716 Make the CoordinateConversions use a floating point PI 2011-11-16 11:35:52 -06:00
James Cotton
aa698f7b0a Increase the CC IRQ stack to avoid some memory warnings 2011-11-16 09:20:30 -06:00
James Cotton
aeb42332d6 Get the MPU6050 fifo running and read by the attitude module 2011-11-14 11:23:14 -06:00
James Cotton
59507249e1 Hack in attitude to read directly from gyros instead of fifo. All sensors 
reading now.
 2011-11-14 11:12:10 -06:00
James Cotton
1086df5b21 Correctly configure MPU6050 interrupt. However currently not pushing data to 
the buffer as that seems to fail.
 2011-11-14 11:11:40 -06:00
James Cotton
2cc2e55248 Add attitude solution for revo 2011-11-14 10:49:37 -06:00
James Cotton
4c04d01be4 Dos2unix pios_config.h for revo 2011-11-14 10:25:57 -06:00
James Cotton
e32cc92002 For now act like revo is using init call system to fix compile errors. 2011-11-14 10:25:28 -06:00
James Cotton
da679441ec Duplicate the spektrum (dsm) driver to F4 branch 2011-11-14 10:12:51 -06:00
James Cotton
684715930a Merge branch 'next' into revolution 
Conflicts:
	flight/OpenPilot/Makefile
	flight/Revolution/System/inc/openpilot.h
 2011-11-14 10:11:53 -06:00
James Cotton
180d84e373 Update the MPU6050 code a bit more to use the right registers. 2011-11-14 10:09:49 -06:00
James Cotton
2eb89e9b81 No reason for the data read flag in pios_bmp085.c to be a semaphore 2011-11-14 10:07:19 -06:00
James Cotton
76a956416c Switch revo over to MPU6050 2011-11-13 19:45:06 -06:00
James Cotton
96a098bf74 Add code for MPU6050 driver 2011-11-13 19:44:56 -06:00
James Cotton
1e2fe77e3f Start migrating the attitude solution to FreeRTOS 2011-11-13 18:51:35 -06:00
James Cotton
0c103f7b2c Delete F2 PiOS port since unused 2011-11-13 17:33:43 -06:00
James Cotton
fffb6449ac Delete the old INS target 2011-11-13 17:31:34 -06:00
James Cotton
c44235494c Update the Revolution board file a bit 2011-11-13 17:23:56 -06:00
James Cotton
938a577d11 Small change to pios_adc so it works when not enabled 2011-11-13 17:14:08 -06:00
James Cotton
ec84fc4058 Get the Revolution bootloader working 2011-11-13 17:13:42 -06:00
James Cotton
2b37d4bbb5 Enable telemetry on revo 2011-11-13 16:10:19 -06:00
Oleg Semyonov
4a99ec3298 code style: move variable into function and free 1 byte of RAM :-) 
component     free heap used
    ----------------------------
    Nothing            2560    -
    PWM                2432  128
    PPM                2408  152
    DSM                2464   96
    S.Bus              2448  112
    GPS (port only)    2368  192
    GPS (port+module)  1312 1248
    CameraStab         2096  464
    Telemetry          1928  632
 2011-11-13 18:27:52 +02:00
James Cotton
b110e9c549 Style suggestions to cleanup GPS from Stac 2011-11-12 21:31:01 -06:00
James Cotton
f0b22519be Merge remote-tracking branch 'origin/corvuscorax/CC_GPS' into next 2011-11-12 21:30:53 -06:00
James Cotton
fdcc6c2d41 Fix a bug I made in programming the bootloaders via jtag 2011-11-12 21:29:46 -06:00
Corvus Corax
198c819943 some more makefile cleanup 2011-11-11 11:54:31 +01:00
Corvus Corax
cd473ed1fd some makefile cleanup 2011-11-11 11:51:45 +01:00
Corvus Corax
aa69027cb2 Merge branch 'next' into CC_GPS 2011-11-11 11:44:11 +01:00
Corvus Corax
61ecc0d310 make optional modules check themselves if they should start or not 2011-11-11 11:39:57 +01:00
Corvus Corax
e03e3c2ed8 removed "special code" to start optional modules 2011-11-11 11:22:54 +01:00
Corvus Corax
5e14e69a08 Revert "OpenPilot: Initialize optional modules based on UAVObject" 
This reverts commit 9f03ba178b.
 2011-11-11 11:08:49 +01:00
Corvus Corax
9679638244 Revert "Modules/GPS: removed comment line" 
This reverts commit 109a58ef30.
 2011-11-11 11:07:02 +01:00
Corvus Corax
88f161dd42 Revert "Makefiles: fixed comment line" 
This reverts commit 0065842de7.
 2011-11-11 11:06:32 +01:00
Oleg Semyonov
8f77d07119 System Module: fix stupid out of memory detection bug 2011-11-07 19:14:55 +02:00
Oleg Semyonov
f5e82b8242 spektrum: rename Spektrum to DSM (DSM2/DSMJ/DSMX used by Spektrum and JR radios) 
No code changes, just file, variable and define names are changed.

First, it better describes the serial protocol used by DSMx satellite
receivers. Second, many people using Spektrum radio, assume Spektrum
protocol. This is the attempt to address those inaccuracies.
 2011-11-04 21:40:34 +02:00
Oleg Semyonov
8ed23c76b7 spektrum: fix OpenPilot MB target (deprecated) after spektrum changes 2011-11-04 20:43:49 +02:00
James Cotton
c0f16d2f44 Revolution: Configure clocks correctly 2011-11-03 20:12:34 -05:00
James Cotton
a2015a4f8d Compiled and flashing 2011-11-02 13:20:39 -05:00
James Cotton
0ce80e02f5 Compiles now 2011-11-02 02:51:20 -05:00
Oleg Semyonov
481bff2578 spektrum: code style fixes accoring to OPReview-122 2011-11-01 18:48:07 +02:00
James Cotton
0931a518d4 Bring F4 PiOS up to date with some of our timer conventions 2011-11-01 04:39:51 -05:00
James Cotton
48d2e038bb More work to the revolution build 2011-11-01 04:39:20 -05:00
James Cotton
4d6f810984 Make ADC driver play properly when not included 2011-11-01 03:22:48 -05:00
James Cotton
7eee6bf85b Create revolution board file 2011-11-01 03:22:19 -05:00
James Cotton
7ee4a0412c Work on the build process and include FreeRTOS 2011-11-01 03:20:25 -05:00
James Cotton
9607da9c62 Add some drivers to the device specific library for now until the exti problems 
are fixed
 2011-11-01 03:19:58 -05:00
James Cotton
2cc0b301ce Make some of the StdPeriph function calls const where appropriate 2011-11-01 03:18:59 -05:00
James Cotton
cdb6059752 Coyp over some of how the PH build system works 2011-11-01 01:36:52 -05:00
James Cotton
9bdd021b2e Make new Revolution target 2011-11-01 01:17:59 -05:00
James Cotton
3388843fb5 Merge in PixHawk F4 work 2011-11-01 01:09:55 -05:00
Oleg Semyonov
a8b36ddd28 HwSettings: disable GPS and telemetry port speed updates at run-time 
This is to be consistent across the HwSettings object fields which are
read on boot only by convention.
 2011-10-31 23:04:17 +02:00
Oleg Semyonov
0116e6a007 spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support 
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.

For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.

Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.

Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.

Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.

The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
 2011-10-30 19:29:03 +02:00
James Cotton
f019412209 Various tweaks to get the F4 working 2011-10-26 21:56:00 -05:00
James Cotton
d786c152e3 Merge F4 files from PixHawk branch 2011-10-26 18:23:35 -05:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-10-26 13:18:44 -05:00
Oleg Semyonov
a19bbba858 Merge branch 'next' into os/alternative_spektrum_driver 2011-10-25 11:55:05 +03:00
James Cotton
27bf2b383e Merge remote-tracking branch 'origin/james/remap_outputs' into next 2011-10-23 18:35:25 -05:00
Oleg Semyonov
4ed23dd891 Output Remapping: renamed PPM_SERVO option to PPM+Servo 2011-10-24 00:34:01 +03:00
James Cotton
23150a48fe Merge remote-tracking branch 'origin/os/sbus_dynamic_malloc' into next 2011-10-23 15:26:26 -05:00
James Cotton
24d6ae731b Output Remapping: Added option to just use servo outputs on input lines but not 
PPM.  This saves resources.  Good suggestion Os.  In this configuration we
could allow 12 channels of output but for now I'll leave it capped at 10 to
lessen resources on the mixer table.

With spektrum and camera stab enabled there was
1632 bytes heap remaining
180 bytes irq stack remaining
 2011-10-23 15:21:40 -05:00
Oleg Semyonov
2a98a52f4c gps: include optional GPS module by default 2011-10-23 00:41:18 +03:00
Oleg Semyonov
f71361ca83 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/Modules/System/systemmod.c
 2011-10-22 23:00:47 +03:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes 
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
 2011-10-22 00:44:09 +03:00
Oleg Semyonov
62bca651d5 spektrum: alternative DSMx (DSM2/DSMJ/DSMX) driver 
- does not glitch when used in 2-frame mode (DM9, 9503, etc)
- does NOT provides yet DSMX stream decoding - do NOT merge
- uses a bit more time in the interrupt, but frees 16 bytes of RAM.
  This is done to help decoding the weird DSMX stream which does not
  contain explicit resolution/frame/lost frames info and needs special
  processing (to be done yet).
 2011-10-21 23:35:17 +03:00
Corvus Corax
167010e8a0 UAVTalk: Fixed bug in parser failing to handle length of multi-instanceobjects 
UAVTalk (on GCS): Fixed a null pointer dereference when receiving in a NACK
 2011-10-21 02:04:29 +02:00
Oleg Semyonov
92b81e3f88 sbus: refactor the code using unified PIOS RCVR driver structure 
- allow more than one S.Bus receiver (needs hardware support)
- use dynamic memory allocation (frees around 72 bytes of RAM when unused)
 2011-10-20 18:23:23 +03:00
James Cotton
e0cc289de0 Remapping inputs to outputs: Drop S2 so there are ten outputs 
Output 7 = S3 input
Output 8 = S4 input
Output 9 = S5 input
Output 10 = S6 input

Also fix bug that prevented them outputting signal
 2011-10-20 06:28:07 -05:00
Corvus Corax
cb8d9c791c PiOS.posix: fixed missing defines in pios_config. removed platform specific inclde from Systemmod (pios_config.h gets included from pios.h) 2011-10-19 22:28:39 +02:00
Corvus Corax
b00751af91 Systemmod bugfix: UAVObject used without Initialization 2011-10-19 22:28:08 +02:00
Corvus Corax
e244581b18 PiOS.posix: bugfix in pios_udp com driver - data send loop 2011-10-19 13:37:35 +02:00
James Cotton
9312610f3b Output: Enable two more channels to support octo + camera 2011-10-15 16:59:42 -05:00
James Cotton
ce7f424131 CC: When receiver port is set to PPM_SERVO use the spare pins as outputs 2011-10-15 16:59:42 -05:00
James Cotton
19c9528d80 CopterControl: Create structures to supply more output channels 2011-10-15 16:59:42 -05:00
Corvus Corax
425bc5abbe PiOS.posix: PIOS_RCVR : fix posix port of pios_rcvr to allow compilation on 64bit systems 2011-10-11 18:07:04 +02:00
James Cotton
9cbb48417a Merge branch 'long_erase_settings' into next 2011-10-08 14:18:56 -05:00
James Cotton
0f1a6264de Fix jtag programming of bootloader 2011-10-08 14:14:11 -05:00
James Cotton
5dc0f397a6 OP-499 Erase settings bug: Make hte flash chip read a wrong value for 1 second 
before wiping settings.
 2011-10-07 14:08:56 -05:00
Oleg Semyonov
7800fbe6de gps: initialize GPS UAVO and start GPS module only if port is configured 2011-09-29 00:41:51 +03:00
Oleg Semyonov
469feecb13 pios: remove some unused #defines 2011-09-28 23:40:12 +03:00
Oleg Semyonov
ed8cf89888 Initcall: fix compilation errors for firmware which does not use Initcalls 2011-09-28 22:57:18 +03:00
Oleg Semyonov
a38c569cd0 HwSettings: move Telemetry and add GPS port speed to the HwSettings object 
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
 2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08 Merge branch 'next' into os/GPS-on-CopterControl_next_v2 
Conflicts:
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	shared/uavobjectdefinition/hwsettings.xml
 2011-09-28 22:02:02 +03:00
James Cotton
fef9570e4d INS: Get bootloader working again 2011-09-27 01:17:14 -05:00
James Cotton
cf6a59468f Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/Project/OpenOCD/stm32f1x.cfg
	flight/Project/OpenOCD/stm32f2x.cfg
	make/firmware-defs.mk
 2011-09-27 01:02:06 -05:00
James Cotton
f1e70d2ff5 Merge remote-tracking branch 'origin/msmith/OP-578' into next 2011-09-23 16:43:00 -05:00
James Cotton
a1aeab9393 Increase size of framing signal for logging 2011-09-15 10:19:59 -05:00
James Cotton
0d3d5ad094 INS: Get rid of old code that tried to detect when indoor mode wasn't called 
for a while
 2011-09-14 17:30:02 -05:00
James Cotton
acf2aa218b Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next 2011-09-14 11:49:01 -05:00
Oleg Semyonov
c92870d29e Remove unused file (versionblob.py) 2011-09-13 16:10:10 +03:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
c36297227d Stabilization fix typo 2011-09-12 11:56:01 -05:00
James Cotton
63bb80649b Merge branch 'max_rate_for_attitude' into next 2011-09-12 11:51:03 -05:00
James Cotton
00c9d62f6a INS: Miscellaneous changes for debugging handling and also some stuff for GPS 
signal loss.
 2011-09-12 11:17:17 -05:00
James Cotton
5b836db54c INS/Guidance: Convert distance to using m instead of cm. This is mainly to be 
able to use NAN to indicate when values aren't valid from INS.
 2011-09-11 23:02:05 -05:00
James Cotton
a682d5deb6 INS: In indoor mode if GPS is found use that to populate PositionActual 2011-09-11 22:53:07 -05:00
James Cotton
8f2fad6918 Fix for merging with the collective channel with the swashplate fix. 2011-09-11 18:53:10 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
Oleg Semyonov
f5369f9338 Input Configuration: support all 18 S.Bus input channels 2011-09-12 02:06:50 +03:00
Oleg Semyonov
7b3056d10f Input Configuration: fix S.Bus receiver in multi-receiver code 2011-09-12 02:06:48 +03:00
James Cotton
b38081bb1b Stabilization: When in none mode zero the integral accumulators for rate and 
attitude loops.  When not using outer loop zero that accumulator.
 2011-09-11 16:33:38 -05:00
Mike Smith
deade53c5d OP-578 - check for CODE_SOURCERY before setting -fpromote-loop-indices 2011-09-11 10:49:09 -07:00
James Cotton
6945f17eba Make the StabilizationSettings.MaxRate field only apply to the stabilized 
modes.  That way ManualRate can exceed MaxRate.
 2011-09-11 12:27:17 -05:00
James Cotton
b8bb2dd2ca Merge branch 'next' into ins 2011-09-10 17:02:15 -05:00
James Cotton
aad41ebb4f Merge branch 'mainboard_receiver_fix' into next 2011-09-10 16:01:22 -05:00
James Cotton
01cd2ded57 Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:20:51 -05:00
James Cotton
4847a04db8 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for 
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
 2011-09-10 14:20:40 -05:00
James Cotton
eb191d869a Mainboard: Get spektrum working again. 2011-09-10 14:19:54 -05:00
James Cotton
c2a8cc3faa Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:19:12 -05:00
James Cotton
f725fbe128 CopterControl: Fix build due to changing the AttitudeRaw structure. 2011-09-10 13:56:00 -05:00
James Cotton
2871c75a79 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for 
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
 2011-09-10 13:53:38 -05:00
James Cotton
199db1362d Actuator: Found a bug in actuator that affects how throttle and pitch curves 
were used.  Basically 80% was always 100%.  This should make hovering better
and fix heli swash pitch.
 2011-09-09 19:40:58 -05:00
James Cotton
1d2a424296 Mainboard: Get spektrum working again. 2011-09-09 09:42:13 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
dfe91af686 UAVObjects: Space allocated in manualcontrolcommand did not match the number of 
channels in settings.  Fixed this and added assertion to catch in future.
 2011-09-09 01:17:13 -05:00
James Cotton
22821e3c93 HMC5883: Missed a channel for HMC5883 2011-09-08 22:25:35 -05:00
James Cotton
552022250b INS: Disable power up checks until these are made more reliable and remove some 
debugging outputs.
 2011-09-08 21:44:27 -05:00
James Cotton
e79e8cdbde INS data output: Add the latency the logged messages 2011-09-08 03:39:39 -05:00
James Cotton
c87a042195 IMU3000: For now sample at 1k which allows us to bring down the I2C clock rate 
to 400k
 2011-09-08 03:37:51 -05:00
James Cotton
0eb4fd113b PiOS BMA180: Increase the comms speed for BMA180 and perfom SPI without 
callback.  This takes less time.
 2011-09-08 03:28:32 -05:00
James Cotton
d7ea1fc306 PiOS I2C: Swap the expected return value of the F2 pios i2c calls 2011-09-08 01:32:27 -05:00
James Cotton
1a5fd9f30e Heli: Added an explicit collective channel. Also make the default channel 
number 0 since that is not invalid.
 2011-09-07 01:48:39 -05:00
James Cotton
72625d9971 PiOS RCVR: Make the public API use a 1 based indexing for channel numbers. 
This may or may not get into next, but if so anyone following it MUST
reconfigure their inputs.
 2011-09-06 16:39:08 -05:00
James Cotton
8f7712435f Merge branch 'safer_failsafe' into next 2011-09-06 16:23:11 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
Sambas
a8ef57c6d6 Redo DX8 changes 2011-09-06 08:40:10 +03:00
Stacey Sheldon
1e9bcf8426 openpilot: fix merge of unidirectional gps feature branch 2011-09-04 23:22:29 -04:00
James Cotton
465527a980 INS: Enable GPS parsing. GPS data is processed on INS now. HomeLocation and 
WMM are not currenly implemented.
 2011-09-04 20:03:04 -05:00
James Cotton
7ff5cd7655 INS: Try and get load down on event system. 2011-09-04 16:21:04 -05:00
James Cotton
cd8ebdf427 INS: Store the gyro bias in the settings so it doesn't get overwritten 2011-09-04 15:21:53 -05:00
James Cotton
b1e0366525 Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next 
Conflicts:
	flight/OpenPilot/System/pios_board.c
 2011-09-04 13:33:52 -05:00
James Cotton
82c5f9f0f4 PIOS_RCVR: Document return values better and use enum for them 2011-09-04 12:37:39 -05:00
James Cotton
533ae9bb41 SBUS: Missed handling the S.Bus failsafe. Now returns PIOS_RVCR_TIMEOUT for 
either SBus failsafe mode or when no data for 100 ms.
 2011-09-04 12:15:34 -05:00
James Cotton
5e2a36aa03 Merge branch 'stac/allocate-device-instances-from-heap' into next 2011-09-04 12:03:42 -05:00
James Cotton
c326c0941d INS: Work on initialization. Improve the zeroing of the gyros at powerup. 2011-09-04 11:49:15 -05:00
James Cotton
510a1760ca When disconnected set any accessory channels to neutral. Otherwise the 
actuator module could keep the pitch at high.  However the "right" thing to do
seems very specific.  For example negative pitch is probably preferable.
 2011-09-04 03:45:36 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
51967ae63f OP-571 PIOS_PWM: Add back the PWM supervisor 2011-09-04 01:17:40 -05:00
James Cotton
20de046292 Force system to be disarmed when a bad configuration is present 2011-09-04 00:43:33 -05:00
James Cotton
d3de8ff0ef OP-559: Process the arm status when disconnect and allow it to timeout and 
disarm
 2011-09-03 23:57:51 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make 
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
 2011-09-03 23:50:56 -05:00
James Cotton
dae11cf877 INS Logging: Enable temperature reading from gyro and accel (may be removed in 
future), push it into UAVO and introduced a logging mode for INS that outputs
all sensor data from aux port.
 2011-09-03 15:10:47 -05:00
James Cotton
5eaebac8d8 INS: Get the aux uart working. All F2 GPIO pins need to be remapped to work. Good thing to remember. 2011-09-02 17:04:39 -05:00
James Cotton
63f64003e5 INS: Change how the initialization of algorithms is handled to ensure sensor 
dat always good
 2011-09-02 13:50:36 -05:00
James Cotton
c40e5800ab BMA180: Enable the EEPROM writing on startup so settings take the first time. 2011-09-02 13:28:36 -05:00
James Cotton
e0ed82eef0 INS Settings: Use the calibration data on the sensors 2011-09-02 13:28:01 -05:00
James Cotton
1d04715476 INS: Rework how the sensor calibration behaves and clean up the interface a 
bit.
 2011-09-02 13:24:35 -05:00
Mathieu Rondonneau
ae1dd945b1 Fix win32 sim macro problem 
This is to get the macro in pios.win32 in sync with sim posix and
real flight.
 2011-09-01 21:50:13 -04:00
James Cotton
3b20df22d1 Updates to config gadget for new INS objects 
Make scope gadget check if object exists before using it.  Avoids segfaults
when scoped objects disappear.
 2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4 This patch breaks backward compatibility with AHRS solidly. 
Move the configuration files for INS from AHRS* to INS*.  Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
 2011-09-01 12:21:33 -05:00
James Cotton
37878ed4e8 Get the OpenPilot compiling again using a previvous pios_board until doing a 
proper merge with next
 2011-09-01 03:31:23 -05:00
Stacey Sheldon
eea011c53b openpilot: fix compile error on OP 2011-09-01 03:31:23 -05:00
Stacey Sheldon
43b31efb76 pios: allocate driver instance data from heap 
Allocate per-instance data for drivers from the heap
rather than as static variables from the .data segment.

This converts > 800 bytes of RAM from being always consumed
as static data into being allocated from the heap only when
a particular feature is enabled in the hwsettings object.

A minimal config (no receivers, flexi port disabled, main port
disabled) leaves 2448 bytes of free heap.  That's our new baseline.

Approximate RAM (heap) costs of enabling various features:
 + 632 Serial Telemetry (includes 400 bytes of Rx/Tx buffers)
 + 108 PWM Rcvr
 + 152 PPM Rcvr
 + 112 Spektrum Rcvr
 + 24  S.Bus (Should be closer to 68 since driver is still using
              static memory)

There are still some drivers that pre-allocate all of their memory
as static data.  It'll take some work to convert those over to
dynamically allocating their instance data.
 2011-08-31 22:35:03 -04:00
Stacey Sheldon
86ce79af1d openpilot: fix compile error on OP 2011-08-31 21:43:57 -04:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together 
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
 2011-08-27 21:39:56 -04:00
Stacey Sheldon
b3c43da90a stdperiph: Make TIM related APIs use const pointers 
This allows the configuration parameters to be stored in
flash instead of copied to RAM.
 2011-08-27 21:39:17 -04:00
Stacey Sheldon
a72c657e21 rcvr activity: Speed up activity acquisition 
Activity detection logic can now move through
the active receivers more quickly.
 2011-08-27 20:17:56 -04:00
James Cotton
6514fd95c7 Also initialize the ReceiverActivity object in manual control 2011-08-27 16:08:57 -05:00
James Cotton
c5746335c6 Initialize GCSReceiver object if it is being used 2011-08-27 15:57:09 -05:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-27 15:26:05 -05:00
Stacey Sheldon
f29b99521e openocd: collapse JTAG rules for STM32F1 and STM32F2 2011-08-27 10:43:02 -04:00
Stacey Sheldon
5a51077493 openocd: add support for RTOS autodetection 
This allows things like 'info threads' to work in gdb when
combined with openocd 0.5.0+.
 2011-08-27 10:38:50 -04:00
Stacey Sheldon
89d23df8cd openocd: Add default config for stm32f2x 
Pulled from origin/james/ins.
 2011-08-27 10:37:20 -04:00
Stacey Sheldon
3d22258843 Merge remote branch 'origin/james/openocd' into upgrade-to-openocd-0.5.0 2011-08-27 09:19:46 -04:00
James Cotton
1d77d77832 Merge branch 'stac/use-malloc-failed-hook' into next 2011-08-27 00:24:13 -05:00
James Cotton
274333a9bf Merge branch 'next' into stac/use-malloc-failed-hook 2011-08-27 00:12:45 -05:00
James Cotton
55f64802d1 Also enable malloc error catching on OpenPilot 2011-08-27 00:12:16 -05:00
Corvus Corax
0065842de7 Makefiles: fixed comment line 2011-08-25 16:28:34 +02:00
Corvus Corax
658ae3f809 Modules/System: removed comment line 2011-08-25 16:26:46 +02:00
Corvus Corax
109a58ef30 Modules/GPS: removed comment line 2011-08-25 16:25:19 +02:00
Corvus Corax
8173c7b7c6 Refactor GPS_PURISTIC into GPS_MINIMAL 2011-08-25 15:44:49 +02:00
Corvus Corax
3690586f3a Optional Modules: Forced re-generation of mod init.h when makefile has changed 2011-08-25 15:42:11 +02:00
Corvus Corax
1d797bf004 Fixed error introduced by merge 2011-08-25 15:40:45 +02:00
Corvus Corax
c63a10d05e CopterControl: Fix GPS buffer sizes 2011-08-25 15:37:38 +02:00
Corvus Corax
4bd72923e5 Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS 
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/GTOP_BIN.c
	flight/Modules/GPS/NMEA.c
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-25 15:33:23 +02:00
Corvus Corax
54ecf233f3 Modules/PS: typo fix 2011-08-25 15:13:50 +02:00
Corvus Corax
7e396efbbf Modules/GPS: Assert buffer creation 2011-08-25 15:11:29 +02:00
Corvus Corax
dfdea16065 Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers 2011-08-25 14:46:30 +02:00
Corvus Corax
8b7fea0d19 Merge branch 'OP-567 GPS com layer fix' into next 2011-08-25 13:35:49 +02:00
Corvus Corax
697ac6067e OP-567 Modules/GPS: Block in PIOS_COM, not in TaskDelay - or we will miss updates! 2011-08-25 13:33:41 +02:00
James Cotton
5f7a9b513a Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next 
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-24 11:37:30 -05:00
James Cotton
1477ea6e94 Make mag updated flag always true when it's updated. Responsibility of INS 
algorithm whether to use data.
 2011-08-22 03:05:02 -05:00
James Cotton
4e59e697af IMU3000: Sometimes the irq is called before previous I2C transaction. This 
isn't good but for now just deal with it.  Need DMA I2C driver.
 2011-08-22 02:34:40 -05:00
James Cotton
8c16f614f2 INS: Use the data from the BMP085 and feed into EKF 2011-08-22 02:32:40 -05:00
Stacey Sheldon
edc0caf521 heap: set memory critical alarm on malloc failures 
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
 2011-08-21 23:14:32 -04:00
Corvus Corax
838149b53f GPS: homelocation init is optional, satellites must be initialized 2011-08-21 18:20:33 +02:00
Corvus Corax
0ce337b42d UAVTalk: fix off by one error preventing the largest UAvObject (gpssatellites) from being sent. 2011-08-21 18:15:10 +02:00
James Cotton
e4e952f270 Manual control settings needs to be initialized in OpenPilot board file for 
spektrum to work
 2011-08-21 02:21:09 -05:00
James Cotton
04072accd4 Manual control settings needs to be initialized in OpenPilot board file for 
spektrum to work
 2011-08-21 02:20:10 -05:00
James Cotton
b1c522def3 Merge remote-tracking branch 'origin/next' into ins 2011-08-21 01:34:40 -05:00
James Cotton
38d9df8fcb HMC5883: Clean up the mag driver 2011-08-21 01:29:55 -05:00
James Cotton
f756e9cbc8 INS: Swap the mag axis 2011-08-21 01:29:24 -05:00
James Cotton
a642f3672c Report running time per loop in us 2011-08-21 00:54:31 -05:00
James Cotton
e1afc9a19a Merge branch 'next' into ins 
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-21 00:47:43 -05:00
James Cotton
c82aa64c53 INS: General clean up to deal with new driver formats. Also automatically 
monitors the EKF rate.
 2011-08-21 00:42:06 -05:00
James Cotton
af69e0a1a8 BMA180 driver; Don't externalize the fifo buffer but handle it in the driver 
layer.  General driver cleanup.
 2011-08-21 00:40:10 -05:00
James Cotton
8ae53a4f97 PiOS: Cleanup IMU3000 driver a fair bit. 2011-08-21 00:39:20 -05:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
Corvus Corax
1ad65e0718 Fixed include in sysstemmod. pios_config.h should not be included explicitly. 2011-08-20 15:04:00 +02:00
Corvus Corax
9f03ba178b OpenPilot: Initialize optional modules based on UAVObject 2011-08-20 15:03:31 +02:00
Corvus Corax
4f1f20e801 OpenPilot: Bugfix: For some reason Debugging information didn't work. Symbols are created now 2011-08-20 14:37:53 +02:00
Corvus Corax
d21f6705aa Disabled double definition of pmlib compilation in openPilot/Makefile - target gencode 2011-08-20 13:11:15 +02:00
Corvus Corax
5ea35bb28c Make Diagnostic UAVObjects optional in OP and Sim_Posix (but enabled by default) 2011-08-20 13:06:58 +02:00
Corvus Corax
7395a369a9 Optional Modules: Ported optional module concept to OpenPilot and Sim_Posix 2011-08-20 13:02:44 +02:00
Corvus Corax
53d0732fc6 Enable GPS module as "optional module" in CooterControl 2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules) 2011-08-20 01:24:06 +02:00
James Cotton
952b4e1809 Have to speed up the comms rate for gyro to handle the oversampling we are 
using.
 2011-08-19 14:35:13 -05:00
James Cotton
cefc2b8c2e Clean up main INS function a bit. 2011-08-19 14:34:56 -05:00
Corvus Corax
b75890fcd4 Merge branch 'next' into CC_GPS 2011-08-19 21:34:38 +02:00
James Cotton
d103541970 IMU3000: Make the IRQ trigger the callback based I2C read. Drop the 
temperatured data from the FIFO stream.  Add some flags to stop the callbacks
trampling over the configuration.
 2011-08-19 14:28:33 -05:00
James Cotton
3465eb2f30 PiOS F2 I2C: Add a callback based transfer. This needs merging into the main 
transfer function like SPI but I will leave that for now to avoid creating a
lot of changes in the main code.
 2011-08-19 13:38:11 -05:00
Corvus Corax
85aef9c7b4 OpenPilot: bugfix: Add GPS tx buffer by default (needed until GPS has been refactored to not send or only send when configured so) 2011-08-19 20:22:05 +02:00
Corvus Corax
2062ec0aeb AHRS_COM: Initialize transpherred objects before using them 2011-08-19 19:52:27 +02:00
Corvus Corax
5e4941f7cb PiOS.posix: make PiOS.posix bail in case of a Panic with an error message 2011-08-19 18:41:59 +02:00
James Cotton
7444337418 F2 PiOS I2C: Add a poor man semaphore here in case we start calling I2C 
transfers from IRQ.  Also catch the double 0x70084 event which was locking up
the FSM with -Os enabled.  I did this in a cheating way (filtering the event
based on state) but it's the cleanest I can see.  Hopefully a DMA version of
I2C will fix this.
 2011-08-19 11:39:50 -05:00
Corvus Corax
9bba1f7ae9 Posix: fix object initialization where necessary 2011-08-19 18:36:30 +02:00
James Cotton
b0e04e5f79 PIOS SPI: Make sure the non-freertos busy flag inits to zero 2011-08-19 10:52:50 -05:00
James Cotton
03a8bd7674 Statically initialize object handles to null to make sure the uavobjectmanager 
can catch it and return -1.  Do NOT panic when they are null as this is
something that should be caugth at run time in some cases.

Ideally as a compromise in a task start it could have a set of
PIOS_Assert(ObjectNameHandle()) to make sure the minimal set of objects it
needs are there.
 2011-08-19 10:12:39 -05:00