rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-29 07:24:13 +01:00
Code Issues Releases Activity
15,689 Commits 5 Branches 8 Tags 266 MiB
82ca8fa643
Commit Graph

6392 Commits

Author SHA1 Message Date
Laurent Lalanne
9bc63139c3 LP-520 Remove Ch9 from UAVO 2017-06-18 23:41:23 +02:00
Laurent Lalanne
d11b2bbd51 LP-520 Oplink : Remove outdated comments 2017-06-18 23:41:23 +02:00
Laurent Lalanne
20ac6ed1e3 LP-520 Oplink : Send RSSI value as PPM output channel 2017-06-18 23:41:23 +02:00
Jan NIJS
4ba064b017 LP-533 incorrect MCU pin used to toggle inverter for rcvr port on Sparky2 
Bug introduced by LP-480. The wrong MCU pin is used for toggling the input inversion. This inverted the serial signal when it should not be inverted.
ibus reception and possibly other serial receiver protocols where not working.

PC4 was controlled, but according to the schematic, PC6 is connected to the xor port.
PC4 is actually connected to the gyro interrupt.

This bug explains another issue I saw from time to time. After a restart of the Sparky2 board, gyro and accelerometer graphs remained locked at 0. Making the board unusable for flight.
 2017-06-18 12:31:02 +02:00
Laurent Lalanne
ed28311841 LP-482 Complementary+Mag : Allow fast convergence for mag 2017-06-17 23:01:01 +02:00
Laurent Lalanne
684e0dc14f LP-482 Increase temporary MagKp for initialisation 2017-06-17 16:50:58 +02:00
Laurent Lalanne
ee7d630e3e LP-482 Fix Complementary Mag integral sign 2017-06-17 16:49:40 +02:00
Vladimir Zidar
429f8c41be LP-529 [I2C] [MS5611] Remove PIOS_DELAY_WaitmS() and move (re)initialization into fsm. 2017-06-14 16:12:35 +02:00
Vladimir Zidar
b0fa0edb64 LP-529 [F3] [I2C] Move i2c bus unlocking down to irq, to save one context switch and make bus available for use by other drivers sooner. 2017-06-14 16:10:50 +02:00
Vladimir Zidar
a00af53710 LP-529 [F3] [I2C] Fix nack handling. 2017-06-14 16:10:50 +02:00
Vladimir Zidar
8c60c28b51 LP-529 Fixed i2c port selection for aux mag. 2017-06-14 16:10:24 +02:00
Brian Webb
ea41e40a4a Merged in webbbn/librepilot/LP-526-add-msp_servo (pull request #432) 
LP-526 Adds support for the MSP_SERVO command to the MSP module.

Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
 2017-06-13 19:57:31 +00:00
Vladimir Zidar
0448d627af Merged in mindnever/librepilot/LP-523_implement_uavobject_DataOverrideDefaults_method (pull request #430) 
LP-523 Implement method for overriding uavobject defaults.

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
 2017-06-13 19:53:58 +00:00
Brian Webb
22071ba230 LP-526 Adds support for the MSP_SERVO command to the MSP module. 2017-06-06 19:17:25 -07:00
Vladimir Zidar
9f12a27f53 LP-523 Move object id and instance_size members from UAVOData structure into UAVObjType and keep only pointer to it. UAVObjType contains init_callback too to allow resetting data to default values. 2017-06-07 00:47:47 +02:00
Vladimir Zidar
d52f5a02f8 LP-523 uavobject.c.template: Invoke new method $(NAME)DataOverrideDefaults() from $(NAME)SetDefaults() 2017-06-07 00:47:46 +02:00
Vladimir Zidar
27312c4895 LP-528 partially revert 9f16143ba7 (uavobjects cannot be in ccm - loading from external SPI flash optionally uses DMA) 2017-06-07 00:42:57 +02:00
Vladimir Zidar
d991607aa5 LP-527 Move PIOS_DELAY_Init() after the peripheral clocks have been started. F0 uses TIM2 for delays. 2017-06-05 01:24:40 +02:00
Vladimir Zidar
aadd17d1b4 LP-527 Remove peripheral clock managing code 2017-06-05 01:24:36 +02:00
Lalanne Laurent
45ba6aa806 Merged in f5soh/librepilot/LP-486_enable_BL_Gpsv9 (pull request #429) 
LP-486 GPSv9 : Enable BL and EF firmware build

Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Brian Webb <webbbn@gmail.com>
 2017-06-04 19:18:03 +00:00
Vladimir Zidar
d198b7c70a LP-512 Fixed PikoBLX mpu6000 orientation. 2017-06-02 11:46:40 +02:00
Vladimir Zidar
e44114d794 LP-512 Uncrustify 2017-06-02 11:46:39 +02:00
Vladimir Zidar
61e036d6d3 LP-512 Cleaned up Hw(board)Settings for F3 boards. Removed unneeded stuff. 2017-06-02 11:46:39 +02:00
Vladimir Zidar
8ddd8a029e LP-512 Cleaned up buzzer configuration and usage for boards with dedicated buzzer port. 2017-06-02 11:46:29 +02:00
Vladimir Zidar
e8b7aacd99 LP-512 update F3 pios_usb.c and pios_usb_cdc.c to include bind_available_cb(). 2017-06-01 18:13:24 +02:00
Vladimir Zidar
aba9d56ccc LP-512 Set default fusion algorithm for PikoBLX and tinyFISH 2017-06-01 08:12:14 +02:00
Vladimir Zidar
bc2ba7dccc LP-512 tinyFISH FC: provide usable default flight battery settings calibrations (requires LP-523) 2017-05-30 22:27:24 +02:00
Vladimir Zidar
4eeb983f2d LP-512 Addressed remainging PR comments. 2017-05-30 16:31:39 +02:00
Vladimir Zidar
fb696dc893 LP-512 Remove unused files used for obsolete win32 and osx simulator targets. 2017-05-30 06:21:29 -07:00
Vladimir Zidar
c951370eba LP-512 Fixed tinyFISH SBus/SensorHub shared port initialization. Telemetry works now by default. 2017-05-30 15:08:43 +02:00
Vladimir Zidar
1680b436cd LP-512 pios_usart: Shared ports support: Initializing same uart multiple times will return shared driver instance. Added uart configuration locking ioctl. 2017-05-30 15:08:32 +02:00
Vladimir Zidar
45448875d4 LP-512 HwTinyFISHSettings cleanup. First attempt at shared SBus/SensorHub port. 2017-05-30 15:08:21 +02:00
Vladimir Zidar
e8bccefb9d LP-512 Added missing HoTT Bridge and Frsky Sensor Hub to list of protocols on PikoBlx, Spracingf3 and Spracingf3 evo 2017-05-30 15:08:09 +02:00
Vladimir Zidar
916188dd11 LP-512 Added support for tinyFISH FC 2017-05-29 21:12:28 +02:00
Vladimir Zidar
6fb9a4abc7 LP-512 fix f3 pios_rtc.c (squash this in previous commit) 2017-05-29 17:03:21 +02:00
Laurent Lalanne
5a3dcf2018 LP-486 GPSv9 : Enable BL and EF firmware build 2017-05-27 01:38:37 +02:00
Vladimir Zidar
b523f69f0e LP-512 Addressed most of the PR comments. 2017-05-26 01:06:31 +02:00
Vladimir Zidar
58e19db08f LP-512 Provide missing PIOS_DELAY_GetRaw() prototype for simposix target. 2017-05-25 22:08:40 +02:00
Vladimir Zidar
fb69978fda LP-512 nucleof303re - bootloader fix and misc changes 2017-05-25 22:08:39 +02:00
Vladimir Zidar
77918c51a1 LP-512 Uncrustify 2017-05-25 22:08:39 +02:00
Vladimir Zidar
6eb97ed213 LP-512 SPRacingF3Evo: Allow PPM on UART2 pins only. 2017-05-25 22:08:38 +02:00
Vladimir Zidar
5b5546a1cb LP-512 F3: implemented missing ioctls PIOS_IOCTL_USART_SET_IRQ_PRIO and PIOS_IOCTL_USART_GET_DSMBIND 2017-05-25 22:08:38 +02:00
Vladimir Zidar
faf0ae7c04 LP-512 PikoBLX board added 2017-05-25 22:08:38 +02:00
Vladimir Zidar
ae1c3612e4 LP-512 Bring back accidentally removed function 2017-05-25 22:08:37 +02:00
Vladimir Zidar
90e6ab8ef6 LP-512 SPRacingF3 Evo: Added PPM in to all UARTs. Untested. 2017-05-25 22:08:37 +02:00
Vladimir Zidar
9f16143ba7 LP-512 Moved some non-DMA memory allocations (uavobjects, hid/cdc driver structures and com rx/tx buffers) to CCM if available. 2017-05-25 22:08:37 +02:00
Vladimir Zidar
5ea1c9011b LP-512 fixed STM32F303 ram memory sizes. 2017-05-25 22:08:36 +02:00
Vladimir Zidar
507d5a2b80 LP-512 SPRacingF3 Evo: Heartbeat led is active_low 2017-05-25 22:08:36 +02:00
Vladimir Zidar
302ffd53c7 LP-512 fixed STM32F303xD/E vector names 2017-05-25 22:08:36 +02:00
Vladimir Zidar
bd7641e857 LP-512 Build system changed; ld scripts cleanup 2017-05-25 22:08:35 +02:00
Vladimir Zidar
565014d560 LP-512 Added buzzer output as PIOS_LED_ALARM. 2017-05-25 22:08:35 +02:00
Vladimir Zidar
d1c19fefbd LP-512 Fixed bootloader and dfu to be able to go into proper rescue mode without having *any* firmware flashed. 2017-05-25 22:08:35 +02:00
Vladimir Zidar
e25cc40503 LP-512 ws2811 led support for F3. 2017-05-25 22:08:34 +02:00
Vladimir Zidar
9ae89cedf3 LP-512 stm32 Nucleo F303RE dev board added 2017-05-25 22:08:34 +02:00
Vladimir Zidar
9f8de01b97 LP-512 Set correct F3 flash sector size (2K). This fixes settings save error/hang after "too many" saved objects. 2017-05-25 22:08:33 +02:00
Vladimir Zidar
55d711fa8b LP-512 Added F3 ADC support. CPU Temperature not supported. This is connected to ADC1 and we do ADC2 at the moment only. 2017-05-25 22:08:33 +02:00
Vladimir Zidar
530d1ed2ea LP-512 Re-enable mpu9250 mag sensors 2017-05-25 22:08:33 +02:00
Vladimir Zidar
2e1b3f9086 LP-512 [bmp280] Added driver 2017-05-25 22:08:32 +02:00
Vladimir Zidar
5435dbd464 LP-512 Initial F3 support 2017-05-25 22:08:16 +02:00
Vladimir Zidar
a2d8d795d6 Merged in mindnever/librepilot/LP-512-STM32F30x_StdPeriph_And_STM32_USB-FS-Device_Driver (pull request #427) 
LP-512 STM32F30x StdPeriph And STM32 USB FS Device Driver

Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
 2017-05-25 13:08:19 +00:00
Brian Webb
704b1f073a Merged in webbbn/librepilot/LP-511-port-uavofrskysensorhubbridge (pull request #422) 
Frsky sensor hub telemetry

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Brian Webb <webbbn@gmail.com>
 2017-05-25 12:11:21 +00:00
Vladimir Zidar
b87c8f4e3a LP-512 F3 USB-FS Device: Add support for new usb peripheral in STM32F303xD and STM32F303xE 2017-05-25 13:45:48 +02:00
Vladimir Zidar
f1bfc71727 LP-512 StdPeriph driver: add __attribute__((unused)) where required. 2017-05-25 13:45:03 +02:00
Vladimir Zidar
659b7d0733 LP-512 STM's standard libraries for F30x (CMSIS, StdPeriph and USB Device) 2017-05-25 13:39:28 +02:00
Vladimir Zidar
fc6f426e2c LP-519 F1: Manage GPIO_Mode from pios_servo.c to allow universal timer pin configuration with TIM_SERVO_CHANNEL_CONFIG() macro. 2017-05-18 12:42:33 +02:00
Vladimir Zidar
8edd7c1d7c LP-519 F1: revert pios_sys.c clock management. Due to older (than f3 & f4) gpio architecture, we should not allow clocks for multiple peripherals with alternate functions routed to same io pin. 2017-05-18 12:41:31 +02:00
Brian Webb
ff2504c61f Adds a port of the Tau Labs/dRonin FrSKY Sensor Hub module. 2017-05-17 19:45:40 -07:00
Philippe Renon
0a494a034f Merged in filnet/librepilot/LP-516_gps_jumptoapp_hangs_board (pull request #421) 
LP-516 gps jumptoapp hangs board

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Brian Webb <webbbn@gmail.com>
 2017-05-15 20:18:18 +00:00
Vladimir Zidar
1a28929206 Merged in mindnever/librepilot/LP-480_pios_board_com_port_setup_refactoring (pull request #418) 
LP-480 pios board com port setup refactoring

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
 2017-05-15 18:59:06 +00:00
Philippe Renon
4e3f480304 LP-516 gps: bump bootloader version (from 1 to 2) 2017-05-03 09:05:28 +02:00
Philippe Renon
a116bd2313 LP-516 gps: issuing a JumpToApp in bootloader mode will not hang board anymore 
ssp_dfu guard variable was preventing any user triggered JumpToApp to be fully completed
 2017-05-03 09:05:11 +02:00
Vladimir Zidar
792746f775 LP-480 DSM: do not fail to initialize driver for ports without bind capability. 2017-04-27 16:27:53 +02:00
Vladimir Zidar
ce3cba9d40 LP-479 Set lowest acceptable dshot rate to 150khz to avoid possible division by zero and unreasonably slow rates. 2017-04-26 16:57:38 +02:00
Vladimir Zidar
58e70c8849 LP-480 reverted irelevant .xcodeproj file 2017-04-25 18:40:54 +02:00
Vladimir Zidar
50fce728f8 LP-479 Addressed PR comments 2017-04-25 14:10:08 +02:00
Vladimir Zidar
3b39f1b4ce LP-479 fix simposix firmware build 2017-04-25 14:10:08 +02:00
Vladimir Zidar
1ebfb701f6 LP-479 Initial DShot implementation, F4 & F1 2017-04-25 14:10:07 +02:00
Vladimir Zidar
01f5baaed2 LP-480 Removed PIOS_BOARD_USART_Ioctl() and moved inverter handling to pios_usart directly. Handling is now conditionally built in based on PIOS_USART_INVERTER_PORT define. 2017-04-25 13:11:37 +02:00
Vladimir Zidar
3d876d7035 LP-480 Removed RadioAuxStream function from PIOS_BOARD_IO_Configure_RFM22B(), added another function to configure radioaux from hwsettings (revo & sparky2 only). 2017-04-24 16:10:18 +02:00
Vladimir Zidar
bb68ed2c5a LP-480 RevoNano USART2 sbus baud rate workaround 2017-04-24 13:04:23 +02:00
Vladimir Zidar
05ee4b8dac LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1). 2017-04-24 13:04:23 +02:00
Vladimir Zidar
86022e2def LP-480 removed unused PIOS_BOARD_IO_Configure_WS2811() and PIOS_BOARD_IO_Configure_ADC() from pios_board_io.h 2017-04-24 13:04:22 +02:00
Vladimir Zidar
9d01cbe4d4 LP-480 Comments out PIOS_INCLUDE_USART and PIOS_INCLUDE_PWM from simposix pios_config.h to allow simposix fw build. 2017-04-24 13:04:22 +02:00
Vladimir Zidar
97210850c3 LP-480 add missing #include 2017-04-24 13:04:22 +02:00
Vladimir Zidar
280e771ded LP-480 Make PIOS_BOARD_IO_USB_[VCP|HID]_Function enums based on HWSETTINGS_USB_[HID|VCP]PORT values to allow simple type casting. 2017-04-24 13:04:22 +02:00
Vladimir Zidar
1548312823 LP-480 CopterControl will expect ADC_Init() only if board revision has analog gyro, so be prepared to get NULL from PIOS_BOARD_HW_DEFS_GetAdcCfg() 2017-04-24 13:04:21 +02:00
Vladimir Zidar
83326eaca3 LP-480 all targets build nicely. 2017-04-24 13:04:03 +02:00
Vladimir Zidar
a6f7cc6cdf LP-480 gpsplatinum board_hw_defs cleanup 2017-04-24 13:03:11 +02:00
Vladimir Zidar
16020c1839 LP-480 GPSplatinum pios_usart fixes. Bootloader now fits again. 2017-04-24 13:03:11 +02:00
Vladimir Zidar
9eb1f3b5e5 LP-480 Moved sensors initialization to pios_board_sensors.c 2017-04-24 13:03:07 +02:00
Vladimir Zidar
c9f6ba55a0 LP-480 USB config cleanup. Coptercontrol & Revo tested. Booted. Usb functional. 2017-04-24 13:01:44 +02:00
Vladimir Zidar
5cebebe33b LP-480 More work in progress. 2017-04-24 13:01:41 +02:00
Vladimir Zidar
ddc4f3d855 LP-480 coptercontrol build ok 2017-04-24 12:55:10 +02:00
Vladimir Zidar
c0adcb904b LP-480 build discoveryf4bare 2017-04-24 12:55:09 +02:00
Vladimir Zidar
dd49ef0166 LP-480 work in progress: revo, nano & sparky2 targets ok. 2017-04-24 12:55:06 +02:00
Alessio Morale
54a81fdcf1 Merge remote-tracking branch 'webbbn/LP-499-enhanced-oplink-bridging' into next 2017-04-22 22:25:49 +02:00
Brian Webb
a22809f52e Merged in webbbn/librepilot/LP-506-remove-pair-stats-from-rfm22b-cod (pull request #414) 
LP-506 Removes pair stats from oplink code.

Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
 2017-04-22 17:36:05 +00:00
Brian Webb
027e021378 Merged in webbbn/librepilot/LP-507-convert-all-times-in-rfm22b-drive (pull request #415) 
LP-507 Converts all tick times in the rfm22b driver to ms.

Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
 2017-04-22 17:35:40 +00:00
Brian Webb
dc5eef0cb5 LP-499 Adds support for bridging either radio primary, radio auxilary, and/or VCP to any of the output ports (main, flexi, VCP, HID). Also adds the ability to configure the com speed of the UARTs independent of the air data rate. 2017-04-22 09:36:04 -07:00
Brian Webb
ece26d20b1 LP-506 Removes pair stats from oplink code. 2017-04-22 09:31:32 -07:00
Brian Webb
5dff540d07 LP-507 Converts all tick times in the rfm22b driver to ms. 2017-04-22 09:26:32 -07:00
Laurent Lalanne
37d1a84945 LP-504 Set speed unit to cm/s 2017-04-08 10:19:27 +02:00
Lalanne Laurent
524cba9279 Merged in f5soh/librepilot/LP-488_autotune_altitudeVario (pull request #395) 
LP-488 Add AltitudeVario to Autotune

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
 2017-03-30 18:53:05 +00:00
Eric Price
faf51bb13b Merged in corvusvcorax/librepilot/LP-500_HoTT_Telemetry_Bridge (pull request #409) 
LP-500 HoTT Telemetry Bridge

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Eric Price <corvuscorax@cybertrench.com>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
 2017-03-30 18:02:29 +00:00
Vladimir Zidar
f0457e654a Merged in mindnever/librepilot/LP-495_USB_CDC_ep_status_nak_fix_F4 (pull request #403) 
LP-495 F4 USB CDC: remove internal rx_active state tracking and use actual endpoint status instead (like F1)

Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Eric Price <corvuscorax@cybertrench.com>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
 2017-03-30 18:02:16 +00:00
Vladimir Zidar
d0030efeb0 LP-495 PR comments and uncrustify 2017-03-28 22:29:02 +02:00
Eric Price
cae5668e64 LP-500 Allow HoTT Telemetry on all USARTS (Rcvr, Flexi and Main) (trivial) 2017-03-28 08:25:34 +02:00
Eric Price
c5ea323770 LP-500 fixed comment typos found in PR/review 2017-03-28 07:58:50 +02:00
Eric Price
545f1c863b LP-500 HoTT Bridge Module ported from TauLabs 2017-03-24 07:56:19 +01:00
Corvus Corax
02b5f26a72 LP-500 HoTT Telemetry added device definitions 2017-03-24 07:54:27 +01:00
Corvus Corax
faf894c530 LP-500 Added UAVObject for HoTT bridge 2017-03-24 07:54:21 +01:00
Corvus Corax
2977ec1382 LP-500 HoTT bridge module initial create 2017-03-24 07:54:01 +01:00
Philippe Renon
a14469e68b Merged in filnet/librepilot/LP-486_disable_gpsplatinum_compilation (pull request #394) 
LP-486 temporarily disable compilation of gpsplatinum bootloader

Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Harold Hankins <hwh@hjns.net>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
 2017-03-23 19:45:58 +00:00
Pashalis Padeleris
67a9aa35ef Merged in padeler/librepilot/LP-483-python-uavtalk (pull request #389) 
LP-483 python uavtalk scripts and examples

Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Pashalis Padeleris <padeler@gmail.com>
 2017-03-23 19:44:56 +00:00
Paul Jewell
7428ab59f9 Merged in paul_jewell/librepilot/LP-289_pidcontrol_ne (pull request #362) 
LP-289 pidcontrol ne

Approved-by: Eric Price <corvuscorax@cybertrench.com>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Paul Jewell <teulupaul@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
 2017-03-21 21:49:51 +00:00
Vladimir Zidar
a1e84d5483 Merged in mindnever/librepilot/LP-484-refactoring_oplink_and_openlrs_rcvr_ppm_callbacks (pull request #392) 
LP-484 refactoring oplink and openlrs rcvr ppm callbacks

Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Brian Webb <webbbn@gmail.com>
 2017-03-21 21:41:25 +00:00
Alessio Morale
dc0bd7967d Merged in alessiomorale/librepilot/LP-448_autodetect_count (pull request #391) 
LP-448 - stop autodetecting the number of cells once the board is armed and after a minute from power on.

Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Harold Hankins <hwh@hjns.net>
 2017-03-21 21:29:18 +00:00
Vladimir Zidar
1203fa9e66 LP-495 F4 USB CDC: remove internal rx_active state tracking and use actual endpoint status instead (like F1) 2017-03-15 16:33:52 +01:00
paul Jewell
c056e73b93 LP-289 Removed orphaned doxygen addtogroup directives 2017-03-09 20:14:07 +01:00
paul Jewell
dcb3d760db LP-289 Updated copyright notices 2017-03-09 19:43:24 +01:00
Eric Price
fb5f9034ea LP-289 prevent initialization with non-zero pid->I accumulator (dangerous if kI is low) 2017-03-09 19:43:24 +01:00
paul Jewell
ebc4b16d9a LP-289 Clean up comments and uncrustify 2017-03-09 19:43:24 +01:00
paul Jewell
143b5e7ab6 LP-289 Small change to comment 2017-03-09 19:43:24 +01:00
paul Jewell
a19bd40259 LP-289 cleaned up PIDControlNE::UpdateParameters() 2017-03-09 19:43:23 +01:00
paul Jewell
c723a06e93 LP-289 added comments and fixed one typo 2017-03-09 19:43:23 +01:00
paul Jewell
edd3b8689b LP-289 Further clean up of PIDControlDown::UpdateParameters() 2017-03-09 19:43:23 +01:00
paul Jewell
814a882a1d LP-289 Manage kp=0 in PIDControlDown::UpdateParameters() 2017-03-09 19:43:23 +01:00
Eric Price
e9a0e3ad69 LP-490 cosmetic code cleanup 2017-03-07 12:12:18 +01:00
Laurent Lalanne
40e6b3c39f LP-488 Change ThrustControl name 2017-03-03 01:46:10 +01:00
Eric Price
2124393d5f LP-490 EKF maps magnetometer into horizontal plane based on known HomeLocation.Be value, to not distort Roll+Pitch estimate from mags 2017-03-02 19:01:02 +01:00
Eric Price
23e50ae5f8 LP-490 re-introduce correct mag handling (scaling to unit vector) in insgps13state 2017-03-02 19:00:42 +01:00
Eric Price
e62cf039fb LP-490 move back to insgps13state 2017-03-02 18:59:48 +01:00
Eric Price
3b65559904 LP-443 bugfixes in insgps14state - prevent NaN propagation from bug in magnetometer handling, fix missing dimension in array 2017-03-02 09:51:27 +01:00
Eric Price
74bd1589e8 LP-443 modified insgps14state to use spare matrix optimization (similar to insgps13state) as opposed to precompiled prediction equation code 2017-03-01 19:51:40 +01:00
Laurent Lalanne
e7eeba8475 LP-489 Round the smoothQuickValue to 0 2017-03-01 17:12:23 +01:00
Laurent Lalanne
7207e95447 LP-489 Apply SmoothQuickSource changes 2017-03-01 17:12:19 +01:00
Laurent Lalanne
f73dc05029 LP-488 Add AltitudeVario to Autotune 2017-03-01 12:50:56 +01:00
Philippe Renon
60525a63da LP-486 temporarily disable compilation of gpsplatinum bootloader 
will be reverted once this firmware compiles again
 2017-02-26 15:12:52 +01:00
Alessio Morale
99d54668be LP-446 - Configurable debounce timer 2017-02-26 15:12:49 +01:00
Alessio Morale
9def29d927 LP-446 - Add LiHV 2017-02-26 15:12:46 +01:00
Alessio Morale
dbbc0f0ed0 LP-446 - fixes from review 2017-02-26 15:12:44 +01:00
Alessio Morale
45eb52fcd8 LP-446 - Implement battery alarm failsafe 2017-02-26 15:12:39 +01:00
Alessio Morale
7a7b5c6f68 LP-446 - Fix threshold names for FlightBatterySettings 2017-02-26 15:12:37 +01:00
Vladimir Zidar
95be5b1f0b LP-484 Addressed PR review issues. 2017-02-21 19:54:18 +01:00
Vladimir Zidar
d49394f8fb LP-484 Set correct servo out bank mode (PWM). Enable TIM1_UP_IRQ to fix PPM input @main port for oplinkmini target. Move ComUsbBridge to OPTMODULES for oplinkmini target. 2017-02-21 16:44:29 +01:00
Vladimir Zidar
45d1eb7493 LP-484 This change removes custom PIOS_OpenLRS_Rcvr_UpdateChannels() api in favor of PIOS_OpenLRS_RegisterPPMCallback() to be in line with other receiver modules. Furthermore, this commit moves the openlrs/oplink ppm callback from pios_board.c into *rcvr* module itself. 2017-02-21 16:44:20 +01:00
padeler
8c0f29a4ea LP-483 Fixed typo in header comments 2017-02-21 01:45:39 +02:00
Alessio Morale
0e078cdd5e LP-448 - stop autodetecting the number of cells once the board is armed and after a minute from power on. 
This prevent the number of autodetected cells to change if the battery is discharged and the board is disarmed/rearmed.
The timer prevent the autodetected cells to change if the the battery discharges on the ground.
 2017-02-20 23:07:58 +01:00
Alessio Morale
556c2e9e99 Merged in alessiomorale/librepilot/lp-446_battery_failsafe (pull request #355) 
LP-446 Battery failsafe

Approved-by: Lalanne Laurent
Approved-by: Philippe Renon
Approved-by: Harold Hankins
Approved-by: Alessio Morale
 2017-02-20 20:39:51 +00:00
Alessio Morale
d5768f87c7 LP-446 - Configurable debounce timer 2017-02-20 21:28:03 +01:00
padeler
0ff0fe6532 LP-483 sets author to librepilot in all python files 2017-02-17 20:37:47 +02:00
padeler
116ec93332 LP-483 Moved python module outside ground. Renamed to librepilot 
Protocol bugs fixed in the metadata object packing
Metadata fix for the connectionmanager. Connection manager keeps connection
alive by sending an object periodically. Example scripts updated.
 2017-02-16 02:52:24 +02:00
padeler
7038aacdfe LP-483 cherry-pick pyuavtalk code from amorales fork 2017-02-16 02:48:37 +02:00
Lalanne Laurent
758af312b5 Merged in filnet/librepilot/LP-402_invalid_value_for_running (pull request #381) 
LP-402 invalid value for running
 2017-01-27 20:21:12 +00:00
Philippe Renon
20454c53a0 Merged in mindnever/librepilot/LP-270-Implement_a_PIOS_COM_ChangeConfig (pull request #386) 
LP-270 implement a PIOS_COM_ChangeConfig API
 2017-01-27 19:56:38 +00:00
Philippe Renon
ae74c7f3f0 Merged in f5soh/librepilot/LP-478_Wizard_stick_do_not_move (pull request #384) 
LP-478 TX Wizard issues
 2017-01-27 19:56:31 +00:00
Philippe Renon
aeddb98ea6 Merged in mindnever/librepilot/LP-475_Fix_PIOS_MPU9250_Mag_Sensitivity (pull request #382) 
LP-475 Fix for PIOS_MPU9250_Mag_Sensitivity() function.
 2017-01-27 19:56:04 +00:00
Vladimir Zidar
191f92ce91 LP-270 - Updated copyright years 2017-01-23 13:50:22 +01:00
Vladimir Zidar
4bb5bee32b LP-270 - Add baud rate and mode parameters. Store working copy of usart init structure for private use, so we do not revert to original config before every change. Re-enable usart after changing parameters. 2017-01-23 13:39:40 +01:00
Alessio Morale
9750879396 LP-270 - F0 and F4 Implementation 2017-01-23 13:39:39 +01:00
Alessio Morale
6d80b55c60 LP-270 - Implement PIOS_COM_ChangeConfig API (F1) 2017-01-23 13:39:39 +01:00
Laurent Lalanne
fa34dcda67 LP-440 Remove - Add Comments 2017-01-22 15:05:19 +01:00
Laurent Lalanne
33b16be19c LP-440 Fix ReceiverActivity disabled while armed 2017-01-22 12:17:56 +01:00
Jan NIJS
9ed4f644aa LP-477 Describe iBus packet format and add packet type validation check 
Also add a compile time protection to make sure we don't compile with bad buffer lengths.
 2017-01-20 15:20:42 +01:00
Jan NIJS
07dd0df102 LP-477 Add "iBus RX on receiver port" support for revo(clone) boards. 2017-01-20 15:20:04 +01:00
Vladimir Zidar
100d073e95 LP-475 Use signed int for sensor data to avoid data overflow corruption when applying adjustment factor. 2017-01-19 17:07:15 +01:00
Vladimir Zidar
01679ee02b LP-475 This commit fixes multiple errors in SPI transfer handling inside PIOS_MPU9250_Mag_Sensitivity() function. 2017-01-18 21:57:32 +01:00
Philippe Renon
02d7d04932 LP-402 systemmod: remove commented out cruft 2017-01-16 09:04:38 +01:00
Philippe Renon
1c222bdf09 LP-402 remove unused taskinfo and callbackinfo includes 2017-01-16 09:04:37 +01:00
Philippe Renon
de837a02e8 LP-402 systemmod: properly init task and callback info variables 
avoids random data for unused optional callbacks
 2017-01-16 09:04:33 +01:00
Philippe Renon
a0a2f30788 Merged in f5soh/librepilot/LP-454_Boat (pull request #369) 
LP-454 boat
 2017-01-14 17:52:06 +01:00
Laurent Lalanne
1bff0f479c LP-454 Add boat and differential boat to the ground tab 2017-01-14 17:47:12 +01:00
Philippe Renon
fe9658a27b uncrustify 2017-01-14 16:18:13 +01:00
Alessio Morale
44365cf3e9 LP-446 - Add LiHV 2017-01-09 23:48:23 +01:00
Alessio Morale
d59054d8a6 LP-446 - fixes from review 2017-01-09 23:48:22 +01:00
Alessio Morale
508c6dd763 LP-446 - Implement battery alarm failsafe 2017-01-09 23:41:23 +01:00
Alessio Morale
0a3b3dd82b LP-446 - Fix threshold names for FlightBatterySettings 2017-01-09 23:41:23 +01:00
Philippe Renon
cf1b64966e Merged in alessiomorale/librepilot/lp-443_ekf14_mag_proj_handling (pull request #354) 
LP-443 & LP-353 ekf14 and CF+INS
 2017-01-09 23:13:43 +01:00
Philippe Renon
246706ac9d Merged in mindnever/librepilot/LP-463-Fix_Incorrect_timer_prescaler (pull request #374) 
LP-463 Use correct timer clock for F1 target. All timers get 72M clock regardless of APB domain they live on.
 2017-01-09 22:45:31 +01:00
Philippe Renon
02d4d47139 Merged in f5soh/librepilot/LP-462_MSP_Dterm_zeroed (pull request #373) 
LP-462 MWOSD - MSP: Handle Dterm scale
 2017-01-09 22:45:20 +01:00
Philippe Renon
88784276f0 Merged in f5soh/librepilot/LP-428_Switch_Stick_threshold (pull request #370) 
LP-428 Switch and stick threshold
 2017-01-09 22:45:11 +01:00
Alessio Morale
c5dec236f7 LP-443 - disable Nav Alarm for non Nav algorithms 2017-01-07 18:14:29 +01:00
Alessio Morale
3eb4b45f04 LP-443 - Fixes from review. 2017-01-07 18:14:29 +01:00
Alessio Morale
79c600b151 LP-443 - apply to all other boards as well 2017-01-07 18:14:29 +01:00
Alessio Morale
93dcc55977 LP-353 - Introduce a Nav alarm that is active when Position estimation is not available 2017-01-07 18:14:29 +01:00
Alessio Morale
8df3758104 LP-353 - Implement a specific Nav only option in ekf filter, add a debug NavYaw field for testing pourpose(it may be used for integrity check as well) 2017-01-07 18:14:29 +01:00
Alessio Morale
08b7153624 LP-353 - Set GPSNAVIGATIONINS13CF as nav enabled fusion algorithm 2017-01-07 18:14:29 +01:00
Alessio Morale
8e484dd862 LP-443 - EKF14 - Apply "2D" mag handling for EKF13 as well 2017-01-07 18:14:29 +01:00
Alessio Morale
ff5bd26e1a LP-353 - Allow INS For nav and CF for attitude 2017-01-07 18:14:29 +01:00
Alessio Morale
5d8f4b6cde LP-443 - Fixes to make ins13 and 14 interchangeable 2017-01-07 18:14:29 +01:00
Alessio Morale
4f045bc73a LP-443 - Handle arming 2017-01-07 18:14:29 +01:00
Alessio Morale
ce87ce105e LP-443 - Add INS14 to Sparky/Revo 2017-01-07 18:14:28 +01:00
Alessio Morale
e39a5a92bc LP-437 - Support for Sparky2 2017-01-06 16:02:28 +01:00
Alessio Morale
14080021b2 LP-437 - Support for Revolution 2017-01-06 16:02:28 +01:00
Alessio Morale
0af373a8c7 LP-437 - Support for OPLinkMini 2017-01-06 16:02:28 +01:00
Alessio Morale
2e5f3aa60c LP-437 - Add support for a secondary radio stream and associated AuxCom driver 
TODO: find out if there is still free space on current packet and store both streams content
 2017-01-06 16:02:28 +01:00
Laurent Lalanne
f67c092d6a LP-462 MWOSD - MSP: Handle Dterm scale 2017-01-02 13:04:04 +01:00
Vladimir Zidar
fef715b3d6 LP-463 Use correct timer clock for F1 target. All timers get 72M clock regardless of APB domain they live on. 2017-01-01 17:17:58 +01:00
Lalanne Laurent
c2cf44f8d8 Merged in mindnever/librepilot/LP-415_pios_servo_Add_functions_to_support_esc_passthrough (pull request #334) 
LP-415 pios servo add functions to support esc passthrough
 2016-12-28 14:20:28 +01:00
Alessio Morale
06dd94636b Merged in f5soh/librepilot/LP-345_RFM22_band_rebased (pull request #364) 
LP-345 Rfm22 band
 2016-12-28 13:54:29 +01:00