Corvus Corax
8b6510da4f
Made AltitudeOffset for ReturnToHome configurable, Made Failsafe-FlightMode configurable.
2013-07-15 09:14:09 +02:00
Corvus Corax
65f890982e
adjusted default fixed wing pathfollower settings to be more reasonable
...
tags: dekenzification
2013-07-11 14:02:05 +02:00
Corvus Corax
c1f32e9beb
OP-1036: rename some settings and move them in the right place
...
tags: de-kenzification
2013-07-10 15:55:12 +02:00
Corvus Corax
27eadc200b
Merge branch 'corvuscorax/lla2nedfilter' into next
...
Conflicts:
flight/modules/StateEstimation/stateestimation.c
2013-07-10 14:38:12 +02:00
Corvus Corax
551780c74b
Merge branch 'corvuscorax/complementary_altitude_filter' into next
...
Conflicts:
flight/targets/boards/revolution/firmware/UAVObjects.inc
2013-07-10 14:27:25 +02:00
Brian Webb
c2df59498b
Merge remote-tracking branch 'origin/master' into next
2013-07-06 07:08:30 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Corvus Corax
0107432e45
Added a low pass filter for accels to the altitude filter
2013-07-02 23:17:08 +02:00
Corvus Corax
a259e6d62c
removed now unneeded line from systemsettings (moved to gpssettings)
2013-06-30 20:06:42 +02:00
Corvus Corax
b3aa81d983
added missing file
2013-06-30 20:04:32 +02:00
Corvus Corax
51a4b16af5
New Filter to calculate NED from LLA as part of StateEstimation
2013-06-30 18:49:29 +02:00
Corvus Corax
7745f93935
changed default coefficients and exposed them to a settings uavobject as they should be
2013-06-29 01:16:02 +02:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
f8d60e6dee
OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.
2013-06-26 17:58:02 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Corvus Corax
0c43346292
Merge branch 'corvuscorax/OP-947_stateestimator-module' into next
...
Thanks everyone for helping getting this together, especially Alessio
and DLite :-)
2013-06-25 23:48:12 +02:00
Corvus Corax
e2fca0fcdd
bugfix in uavobject definition
2013-06-25 19:32:50 +02:00
Corvus Corax
f2abe1f5c7
StateEstimation: removed (not yet implemented) 16 state EKF support for now
2013-06-25 19:30:21 +02:00
Oleg Semyonov
9fce86b662
Temporary disable AltitudeHold and AltitudeVario flight modes
...
They were not officially supported. But since people expected the
well-known production quality behavior, it is better to make them
final, then reenable.
2013-06-24 18:08:02 +03:00
Corvus Corax
6f38e26a53
Categorizing all UAVObjects into 5 main categories:
...
State, Sensors, System, Navigation, Control
2013-06-22 19:58:54 +02:00
Corvus Corax
6163c5f53a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
2013-06-22 18:44:03 +02:00
Alessio Morale
4a793c47ad
Changed default AH parameters
2013-06-21 18:42:46 +02:00
Alessio Morale
5318c20de6
OP-1019 add a simple altitude hold
2013-06-20 11:27:45 +02:00
Corvus Corax
1d17d08cca
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-12 18:32:01 +02:00
David Ankers
8fd8847ada
Slightly update default stab settings, now matchs L,U&E
2013-06-12 19:59:47 +10:00
Corvus Corax
f051b7c319
fixed uavobject update mode for GCS
2013-06-09 22:19:54 +02:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Corvus Corax
6fdf554d4a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Corvus Corax
5e306250a5
Enabled simulated sensors in SimPosix for debugging of EKF behaviour including:
...
- SimPosix again stores and reads UAVObjects to disk (was disabled by someone)
- simulated sensors moved to allow automated module initialisation in simposix
- fixed a categorization bug in a uavobject
2013-06-05 19:34:48 +02:00
Corvus Corax
cdf9eaba64
new default variances to go with new mag var calculation
2013-05-29 23:39:18 +02:00
Corvus Corax
6435604182
some fixes and corrections as suggested in review
2013-05-29 22:18:08 +02:00
Alessio Morale
6b2218d1df
Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next
2013-05-28 18:39:42 +02:00
Fredrik Arvidsson
316afefff7
OP-906 Changed defaults for Stabilization settings and Flight modes.
2013-05-27 22:25:17 +02:00
Alessio Morale
c40976c260
OP-925 converted mixed tabs/spaces to spaces only
...
+review OPReview-484
2013-05-27 20:11:59 +02:00
Alessio Morale
78dda599f5
OP-939 Changed default power output for OPLink and Revo to lowest setting
2013-05-26 18:09:15 +02:00
Alessio Morale
9bfce1bcd6
Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next
2013-05-26 16:18:05 +02:00
Corvus Corax
b916df5448
ported cyr's patch to new CF
2013-05-24 23:59:12 +02:00
Corvus Corax
1353be6cb0
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-05-24 19:33:27 +02:00
Brian Webb
5fcc8a1785
Changes default for RemoteMainPort in OPLinkSettings UAVObject to Disabled from Telemetry, which was not in the list of possible choices.
2013-05-23 22:02:31 -07:00
Corvus Corax
843db63cf6
some last issues from review
2013-05-22 23:08:48 +02:00
Corvus Corax
9b95af2006
refaktored GPS Sensor UAVObjects
2013-05-22 22:36:23 +02:00
Corvus Corax
b56de3b66b
filterchain rework
2013-05-22 21:26:18 +02:00
Alessio Morale
0b5a28f19e
Port OP-754 to Revolution attitude estimation module: subtract GyroBIAS to work on raw value
...
Added MagKp and MagKi to AttitudeSetting UAVO
2013-05-21 23:44:12 +02:00
Corvus Corax
d258caad3f
Merge branch 'corvuscorax/OP-946_refaktor_sensor_and_state' into corvuscorax/OP-947_stateestimator-module
2013-05-20 10:34:40 +02:00
Corvus Corax
1236bf3ed9
renamed Magneto to Mag
2013-05-20 10:33:02 +02:00
Corvus Corax
bc6f06e943
first filter implemented and some bugs fixed
2013-05-19 22:24:12 +02:00
Corvus Corax
2ab9f938c9
ongoing dev work, incomplete
2013-05-19 22:24:12 +02:00
Corvus Corax
9c3a8369cd
OP-946: State And Sensor Refaktoring: Moved Filtering for Magnetometers, Gyros and Accels into Attitude
2013-05-18 21:55:47 +02:00
