rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
Code Issues Releases Activity
13,881 Commits 5 Branches 8 Tags 266 MiB
8db83d21b5
Commit Graph

1088 Commits

Author SHA1 Message Date
Steve Evans
45005a167f OP-1289 Revise naming of the two channels of data and associated functions 
The code now uses a "local" prefix to refer to the telemetry channel
associated with a port on the FC and a "radio" prefix to refer to the
telemetry channel associated with the OPLink/USB.

+review OPReview-985
 2015-03-15 23:11:42 +00:00
Steve Evans
12d3bdbe8a OP-1289 add per channel port selection routines 
+review OPReview-985
 2015-03-15 18:19:19 +00:00
Alessio Morale
4e9d092b03 OP-1776 - Disable radioRx task if radio is not enabled, fix for comments 2015-03-15 16:26:56 +01:00
Alessio Morale
7c9f6c0ed5 OP-1776 - Missing change from review 2015-03-15 14:36:23 +01:00
Steve Evans
5952cfa275 Year is 2015 2015-03-15 00:48:36 +00:00
Steve Evans
6bb732fb02 OP-1289 Need Revo to send two telemetry streams for OSD and GCS 2015-03-14 23:58:18 +00:00
Alessio Morale
bb0e03e387 OP-1776 - Further cleanup/optimization for ProcessTelemetryStream* functions 2015-03-14 14:39:02 +01:00
Alessio Morale
a418ca349f OP-1776 - Fixes from review 2015-03-14 13:46:08 +01:00
abeck70
5c9b6fac29 OP-1769 uncrustify 2015-03-14 12:15:59 +11:00
abeck70
5e7a3c30e1 OP-1769 ground actuator 
code review comment addressed to reduce code size
 2015-03-14 12:01:30 +11:00
abeck70
dd2733d73f OP-1769 Ground support review comments 2015-03-11 13:49:21 +11:00
Alessio Morale
2a729c1742 OP-1776 - Optimize RX exchanging, changes for radiocombridge 2015-03-11 00:54:02 +01:00
Alessio Morale
5657f4757b OP-1776 - Optimize RX exchanging buffers instead of working a byte at time 2015-03-10 20:35:40 +01:00
abeck70
f053954228 OP-1769 CC compile fixes 2015-03-10 23:07:14 +11:00
abeck70
52147333ed OP-1769 Ground Support 
1. Receiver.c for ground allows disabled channels for all but yaw and throttle
2. Reciever.c applies a deadband on throttle 0 position
3. Arming understands ground have a 0 throttle position
4. Actuator optimisations in general and fixes for mixing
5. Actuator mixer support for reversible motors
 2015-03-10 22:54:51 +11:00
Erik Gustavsson
ae24359fb4 OP-1739 Always clear ubxLastAck & ubxLastNak when sending UBX message 2015-03-04 19:38:40 +01:00
Erik Gustavsson
0610262cc3 OP-1739 Add (untested) BeiDou support to flight side. 2015-03-01 17:28:43 +01:00
Erik Gustavsson
60736ea82d OP-1739 Fill all UAVO slots with SV data 2015-03-01 16:44:30 +01:00
Erik Gustavsson
76ff576b38 uncrustify 2015-02-28 13:18:24 +01:00
Erik Gustavsson
4ada3d90d9 OP-1739 Add "Default" setting to GNSSMode which skips the GNSS selection 
during autoconfig, e.g. for use with UBX6
 2015-02-28 13:17:22 +01:00
Erik Gustavsson
d6bc3878d3 OP-1739 Check for NAKs in autoconfig 2015-02-28 12:25:24 +01:00
Erik Gustavsson
1024406fd9 OP-1739 Only include SVs with SNR>0 in "GPSSatellites", making better 
use of the 16 slots available.
 2015-02-28 11:01:08 +01:00
Erik Gustavsson
baddff3639 OP-1739 Extend SVINFO to 32 SVs. Make UBX parser handle > 256 bytes 
payload.
 2015-02-28 10:48:26 +01:00
Erik Gustavsson
f5b4e4da37 Remove infinite loop from autoconfig state machine. 2015-02-28 08:09:45 +01:00
Erik Gustavsson
2c403d5323 OP-1739 Add GNSS mode to GPS settings UAVO. 2015-02-28 08:09:45 +01:00
Erik Gustavsson
2029255538 OP-1739 Add CFG_GNSS message to autoconfig, with GPS and GLONASS configurable 2015-02-28 08:09:45 +01:00
Alessio Morale
83ce7c7b9a OP-1750 - cause compiler to trigger an error if a case is missing 2015-02-27 04:01:37 +01:00
Alessio Morale
86111ddefd OP-1750 - don't waste cycles by rescheduling each StateEstimation sub-step 2015-02-26 06:58:57 +01:00
Alessio Morale
a01cab1e72 OP-1743 - Fix attitude issue on CC3D 2015-02-24 22:39:34 +01:00
Alessio Morale
bcbb1d08e4 Merge branch 'amorale/OP-1743_fix_cc_target' into next 2015-02-24 22:26:10 +01:00
Alessio Morale
a30f115567 OP-1743 - Fix uninitialized objects usage 2015-02-24 22:02:56 +01:00
Alessio Morale
84465ae0cb OP-1743 - Fix a very ugly error in attitude(cc/cc3d) 2015-02-24 22:02:25 +01:00
abeck70
c5275fc89b OP-1744 fix crash on revo with ubx config 2015-02-24 22:40:49 +11:00
abeck70
0cd7e20425 Merge branch 'amorale/OP-1685_various_fixes' into test-oneshot 2015-02-23 16:47:12 +11:00
Alessio Morale
ad42ca7f16 Merge remote-tracking branch 'origin/amorale/OP-1658_sensor_overhaul_next' into next 2015-02-22 16:28:04 +01:00
Alessio Morale
1f5f5747f7 OP-1685 - Fix glitches on output settings save. It was due to wrong check for bankmode changes. 2015-02-22 14:21:23 +01:00
Alessio Morale
2a90e86e58 OP-1685 - Try to avoid unneded updates to prevent output glitches 2015-02-22 13:12:00 +01:00
Alessio Morale
0cd545f5e4 OP-1658 - Fix ms5611 units 2015-02-20 05:47:31 +01:00
Laurent Lalanne
26ec24f5b1 Merge remote-tracking branch 'origin/laurent/OP-1601_CC3D_Ubx_only' into next 2015-02-18 02:58:19 +01:00
Alessio Morale
39513f0533 OP-1685 - Rename OneShot to PWMSync to avoid confusion 2015-02-17 23:20:07 +01:00
Alessio Morale
46521f1c2d Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next 2015-02-08 17:59:59 +01:00
Laurent Lalanne
f92eba93ef OP-1601 Ubx only, more efficient to save Ram on CC/CC3D 2015-02-07 17:02:59 +01:00
Laurent Lalanne
f378ca6da7 Merge branch 'laurent/CC3D_Nmea_Gps_14.10' into laurent/CC3D_next_Ubx_only 2015-02-07 14:04:58 +01:00
Laurent Lalanne
5c08f013f1 Allow multiples talkers IDs, define some debug messages and typos 2015-02-06 19:50:09 +01:00
Laurent Lalanne
58e70b2e3a CC3D special firmware : Nmea GPS 2015-02-06 16:59:41 +01:00
Alessio Morale
85335d62a9 OP-1658 - Fix some headers, remove unused files 2015-02-03 00:33:15 +01:00
Alessio Morale
0cf5d163d1 OP-1658 - Fixes for CC3D and its attitude module 2015-02-03 00:00:06 +01:00
Alessio Morale
bdd9ac7c60 OP-1658 - Support reset for main sensors 2015-02-03 00:00:05 +01:00
Alessio Morale
ba0e486004 OP-1658 - Add support for barometer in sensor module 2015-02-03 00:00:05 +01:00
Alessio Morale
6904996aba OP-1658 - add performance counters 2015-02-03 00:00:05 +01:00
Alessio Morale
fc125540b7 OP-1658 - various fixes 
Conflicts:
	flight/pios/common/pios_mpu9250.c
 2015-02-03 00:00:05 +01:00
Alessio Morale
cf791db71e OP-1658 - Implementation of Sensor Module using PiOS Sensors Framework 2015-02-03 00:00:05 +01:00
Alessio Morale
4d8b36adad OP-1658 - Remove sensors includes from pios.h to prevent cross dependencies 2015-02-03 00:00:05 +01:00
Karl Knutsson
b0491da115 OP-1576: Remove unused tx_resent counter 
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
 2015-02-02 21:25:38 +01:00
Alessio Morale
752f3447d2 OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle 2015-02-02 02:58:22 +01:00
Alessio Morale
1d08083375 OP-1682 - OneShot125: Change timer clock to 2MHz (that's available as exact value for current targets), raise timer period to prevent glitches 2015-01-31 14:40:40 +01:00
Alessio Morale
632051c0ac OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot 2015-01-30 21:22:00 +01:00
Alessio Morale
7955f63c98 OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation 2015-01-25 21:25:14 +01:00
Alessio Morale
dcc9a5b7dc OP-1683 - Actuator uses "standard" 1000-2000 range and remap it to 125-250 just before sending to servo to prevent any impact on gcs and other blocks 2015-01-24 13:37:00 +01:00
Alessio Morale
47e1312982 OP-1683 - Implement oneshot/oneshot125 mode to actuator module 2015-01-23 23:51:53 +01:00
Fredrik Arvidsson
c8c3a46735 Uncrustify 2015-01-09 21:49:03 +01:00
abeck70
2b6d79467c gpsassist:code review comments 
1. Defines
2. Name of adjustments changed to vtolSelfTuningStats
 2015-01-09 07:51:37 +11:00
abeck70
b1c94e83d0 gpsassist: One commit new branch 
Collapsed into one branch for a new code review.  Some unnecssary committed files removed.
 2015-01-08 13:20:47 +11:00
Fredrik Larsson
4f7fc1bac7 Merge remote-tracking branch 'origin/corvuscorax/OP-1599_positionvario-reworks' into next 2014-12-14 23:45:57 +11:00
Laurent Lalanne
8d08223e8a OP-1601 Don't use new PVT messages with CC/CC3D 2014-11-15 22:39:17 +01:00
Corvus Corax
5f352f54a3 OP-1599 updated defaults for position roam mode settings, do not low pass filter throttle 2014-11-10 19:06:27 +01:00
Corvus Corax
8fe21ed297 OP-1599 removed autotune from all flight code 2014-11-08 16:17:39 +01:00
Corvus Corax
c0e66a8acf OP-1599 renamed flightmodes 2014-11-08 16:01:59 +01:00
Corvus Corax
3e5c5bd140 OP-1599 added new mode "courselock" in handlers where missing 2014-11-08 14:04:00 +01:00
Corvus Corax
7d2ca3d92f OP-1599 added course lock mode, renamed other position vario modes 2014-11-08 12:59:55 +01:00
Alessio Morale
6a2666381f OP-1588 - Improve manualcontrol assumptions to be easier to mantain 2014-11-01 17:54:54 +01:00
Alessio Morale
e04825e7b7 OP-1588 - Remove *relay flight modes 2014-11-01 16:11:11 +01:00
Alessio Morale
b3b2d1ef02 OP-1584 - Remove some unused big UBX messages when running with GPS_MINIMAL 2014-11-01 16:00:03 +01:00
Alessio Morale
c0ca20f661 OP-1584 - Remove auxmagsupport from cc3d for now as it is unused, remove other stuffs from ubx when GPS_MINIMAL is selected 2014-10-31 19:56:38 +01:00
Corvus Corax
d0417dda84 OP-1573 fix armhandler to not timeout-disarm when flying autonomously 2014-10-29 21:12:57 +01:00
a*morale
7c1265ee30 OP-1548 - Change Fusion algorithm names to make clear their pourpose 2014-10-21 00:49:00 +02:00
Alessio Morale
a9f35e2afe Merge branch 'amorale/OP-1535_mpu_overhaul' into next 2014-10-16 00:51:02 +02:00
Alessio Morale
3ac2874687 OP-1540 - sha1sum was not sent correctly by GPS V9 2014-10-15 00:58:34 +02:00
Alessio Morale
15cd40a907 Merge remote-tracking branch 'origin/skarlsso/OP-1534_add_expo_and_acro_insanity_factor_to_txpid' into next 2014-10-14 21:43:59 +02:00
Alessio Morale
5d074063d1 OP-1535 - Add board specific sensor update rate constant 2014-10-14 05:38:57 +02:00
Fredrik Arvidsson
0fd9758e0c OP-1525 Gaah. 2014-10-12 15:01:34 +02:00
Fredrik Arvidsson
118209e40d OP-1525 Updated comment. 2014-10-12 14:59:41 +02:00
Alessio Morale
f2fc5f5616 OP-1513 - Fix time constants, set initial temperature as first sample value 2014-10-11 23:54:21 +02:00
Alessio Morale
9499cf9abc OP-1535 - Some optimizations for attitude module 2014-10-11 09:57:07 +02:00
Alessio Morale
9350bd65d9 OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz 
Allow per board SPI prescaler settings
 2014-10-10 22:33:49 +02:00
Alessio Morale
c1062124af OP-1531 - Add temperature filtering for baro compensation 2014-10-10 22:33:47 +02:00
Alessio Morale
46fee43487 OP-1531 Filter temperatures for gyro and accel calibration. calculate new bias every 30 samples 2014-10-10 22:33:42 +02:00
Stefan Karlsson
c03d390269 OP-1534 Update both roll and pitch with TxPID Roll+Pitch.Expo option 2014-10-10 18:49:18 +02:00
Stefan Karlsson
bedb749f72 OP-1534 Add expo and acro insanity factor to TxPID 2014-10-10 17:57:24 +02:00
m_thread
19a7f4cd22 OP-1525 Changed some boundaries in firmware code. 2014-10-10 13:56:11 +02:00
m_thread
bb4d271799 OP-1525 Made the Expo magic number a constant and changed it to 1.00695f. 
Changed n the firmware code to match the GCS side.
 2014-10-10 12:26:22 +02:00
Corvus Corax
270f6d87cd OP-1516 changed handling of integrals in acrop 2014-10-06 17:47:16 +02:00
Corvus Corax
b05bd2fb34 OP-1516 fixed boundf mistake 2014-10-05 21:07:06 +02:00
Corvus Corax
9525398deb OP-1516 use fastPow implementation for expo - to make it work on cc3d 2014-10-05 01:25:15 +02:00
Corvus Corax
bdb5c88d08 OP-1516 added bank configurable expo to stick to allow snappier rate response 2014-10-03 19:07:47 +02:00
Corvus Corax
ac0fccc10a OP-1516 re-introduce sanity to Acro+ 2014-10-03 15:44:02 +02:00
Corvus Corax
17f187468c Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1516_acro+ 2014-10-03 12:34:35 +02:00
Alessio Morale
8e2e534c60 Uncrustify/clean commented code 2014-10-03 11:41:26 +02:00
Alessio Morale
21156dbb9e Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo_fixed' into next 2014-10-03 11:12:10 +02:00
Alessio Morale
55402880bc Revert "Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo' into next" 
This reverts commit 316f7fcf02, reversing
changes made to cfa0ef4671.
 2014-10-03 11:11:27 +02:00
Alessio Morale
e553014596 Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next 2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006 Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next 2014-10-03 00:37:39 +02:00
Corvus Corax
a12e2708a2 OP-1516 fixed obvious issues 2014-10-02 23:38:06 +02:00
Corvus Corax
dcb354b0b1 OP-1516 Enable PiroComp per setting 2014-10-02 22:42:08 +02:00
Corvus Corax
3ad47bfa0a OP-1516 added Acro+ stabi mode 2014-10-02 22:13:10 +02:00
Alessio Morale
a5fd040b49 OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-10-01 21:13:44 +02:00
Alessio Morale
ae9f30c729 OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0 2014-10-01 02:07:46 +02:00
Alessio Morale
0ffb99f228 OP-1477 - Fix issue with quick request to DDC port, change baud rate to 57600, fix sys rate, optimize uart tx 2014-10-01 02:06:03 +02:00
Alessio Morale
c1641613ce OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-09-30 15:12:37 +02:00
Alessio Morale
b2aa73acf6 Merge remote-tracking branch 'origin/amorale/OP-1499_autoconfig_retries' into next 2014-09-29 21:30:16 +02:00
Alessio Morale
9e0596c2c5 Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next 
Conflicts:
	Makefile
	flight/targets/boards/discoveryf4bare/firmware/Makefile
	flight/targets/boards/revolution/firmware/Makefile
 2014-09-29 21:26:31 +02:00
Alessio Morale
5054bda433 OP-1477 - Fix SYS message rate 2014-09-28 20:29:52 +02:00
Alessio Morale
f2058dfc7f OP-1477 - Remove hardcoded strings for initialization config 2014-09-28 15:01:19 +02:00
Alessio Morale
4c76620402 OP-1507 - Reduce memory usage for CopterControl 2014-09-27 22:40:17 +02:00
Alessio Morale
d0b37bab28 OP-1507 - Handles GPS data a chunk at time instead of a single byte at time. 2014-09-27 00:17:00 +02:00
Alessio Morale
78756f6873 OP-1499 - Failed Autoconfig will raise an Error Alarm. When AC does start it will reset any previous ack. Force update to Autoconfig Status in GPSPositionSensor UAVO. Add a small pause between each config step 2014-09-24 06:12:48 +02:00
Alessio Morale
8712a1dfdc OP-1477 - Board support for updated SYS message 2014-09-24 01:06:49 +02:00
Alessio Morale
c772442723 OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info) 2014-09-24 01:06:41 +02:00
Alessio Morale
7e78194e12 OP-1477 - change led rate so that's less annoying 2014-09-23 20:27:10 +02:00
Corvus Corax
ca7a3e4333 Merge branch 'next' into corvuscorax/OP-1483_leaky-integrals-and-post-filtering 2014-09-23 13:54:33 +02:00
Werner Backes
b621df59f2 Merge remote-tracking branch 'origin/D-Lite/OP-1483-PathFollower-DisablePosKi' into next 2014-09-23 13:33:32 +02:00
Fredrik Larson
c36e9a9122 Merge remote-tracking branch 'origin/thread/OP-1474_PID_Scaling_Banks' into next 2014-09-23 06:20:34 +10:00
Fredrik Larsson
b93a7a9dce Arming for Helis on Revo 2014-09-23 05:35:35 +10:00
Alessio Morale
0885fda926 OP-1499 - CFG-CFG mask was incorrect (nav is 0x02, not 0x01) 2014-09-22 00:56:49 +02:00
Corvus Corax
41e062373d OP-1483 enable postfilter for indoor mode for filter debugging, change default filter alpha coefficient to 0.999 2014-09-21 19:26:01 +02:00
Alessio Morale
a5ebf36425 OP-1499 - Replay the configuration sequence in case of gps disconnection, add retry logic in case of errors 2014-09-21 16:38:52 +02:00
Alessio Morale
cedb4f127d OP-1477 - typos and other fixes from review 2014-09-20 20:58:40 +02:00
Corvus Corax
76f94e13ef Revert "OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)" 
This reverts commit 1a0ab29050.
 2014-09-20 13:45:45 +02:00
Corvus Corax
b315c8f106 OP-1483 Added velocity filter to correct EKF's velocity estimate for static velocity offsets 
(caused for example by sensor disagreement or calibration issues)
 2014-09-19 16:34:20 +02:00
Corvus Corax
1a0ab29050 OP-1483 implement leaky integral on position control loop in pathfollower (vtol only) 2014-09-19 15:52:11 +02:00
m_thread
226fe186c4 Merge branch 'skarlsso/OP-1474-PID_Scaling_one_factor' of ssh://git.openpilot.org/OpenPilot into thread/OP-1474_PID_Scaling_Banks 2014-09-19 15:15:52 +02:00
Stefan Karlsson
b3e7a23f4f OP-1474 Demultiplex TPS settings when pid banks are updated 2014-09-19 15:12:07 +02:00
Stefan Karlsson
9a21eed71e OP-1474 Make it possible to select axes to scale 2014-09-19 15:11:15 +02:00
m_thread
3b1e67d185 Merge remote-tracking branch 'origin/next' into thread/OP-1474_PID_Scaling_Banks 
Conflicts:
	ground/openpilotgcs/src/plugins/config/stabilization.ui
 2014-09-19 09:01:02 +02:00
Stefan Karlsson
f0c47976a5 OP-1474 Fix label compile error 2014-09-19 01:29:04 +02:00
Stefan Karlsson
31c5f1c519 OP-1474 Make it possible to select the combination of P, I, and D to scale 2014-09-19 01:16:49 +02:00
Stefan Karlsson
d3e7ef300f OP-1474 Use PID banks for the TPS settings 2014-09-19 01:05:08 +02:00
Werner Backes
c90973cb99 Removed the now unused position Ki from VtolPathFollowerSettings UAVObject 2014-09-18 17:01:50 +02:00
Alessio Morale
46ef59f186 OP-1379 - Rebuild and simplify the queuing mechanism 2014-09-17 01:24:01 +02:00
Alessio Morale
eb15939031 OP-1477 - typo in mallocFailed trap 2014-09-17 00:21:32 +02:00
Alessio Morale
2cca5162f7 OP-1477 - a bit of cleanup, some flash bits moved to a separate file 2014-09-16 23:02:53 +02:00
Alessio Morale
2885a20acb OP-1477 - add watchdog support 2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5 OP-1477 - Split and cleanup gpssys module 2014-09-16 22:40:55 +02:00
Alessio Morale
cac463e623 OP-1477 - various changes 
- move to UBX libraries;
- remove configuration (it will be done by Revo);
- set speed at 115200;
- Change sysmod rate;
 2014-09-16 22:40:55 +02:00
Alessio Morale
50d4a97c0c OP-1477 - GPS SYS: for multi device support of HMC5x driver 2014-09-16 22:40:55 +02:00
Alessio Morale
c232985baa OP-1477 - initial framer + autoconfiguration and some fixes 
- Added a framing code for gps data to be able to interleave mag sentences.
 - Fix fields definition, set structures used to send UBX data as packed to fix issues with alignments,
 - change axis orientation to match revo when both boards conector sides are are aligned
 2014-09-16 22:40:54 +02:00
Alessio Morale
28f3ca9a17 OP-1477 - Use UBX_DDC driver 2014-09-16 22:40:54 +02:00
Alessio Morale
11522ccbb0 OP-1477 - move to PIOS_I2C 2014-09-16 22:40:54 +02:00
Alessio Morale
36bb58755b OP-1477 - add support for SPI/MAG 2014-09-16 22:40:54 +02:00
Alessio Morale
1fa2bfddc6 OP-1477 - Add GPS System Module 2014-09-16 22:40:54 +02:00
Alessio Morale
ff82d50ee0 OP-1275 add an APP_MINIMAL flag that optionally omits most of the stuffs (flight related stuffs and sensors for example) 2014-09-16 00:42:49 +02:00
Alessio Morale
c49497f2e0 Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next 2014-09-15 23:49:54 +02:00
Alessio Morale
ece0d64c9f OP-1434 - Update a (old, now wrong) comment 2014-09-15 15:27:19 +02:00
Alessio Morale
3e785cf929 OP-1434 - Use vector_lengthf, fix a typo in a comment 2014-09-14 21:44:41 +02:00
Stefan Karlsson
bdbe875a90 OP-1474 Use ActuatorDesiredThrust as default source for TPS 2014-09-14 16:08:21 +02:00
Werner Backes
80b6757ea6 Don't use I-term in the VtolPathFollower's position control loop for now. 
See OP-1483 for why it's considered not to work as expected.
 2014-09-14 15:39:13 +02:00
Alessio Morale
3fd5ca08cd OP-1434 - Switch to common aux mag support library 2014-09-13 16:15:02 +02:00
Stefan Karlsson
662b29ac05 OP-1474 Include I in the scaling and let the TPS factor piggyback on the speedScaleFactor 2014-09-10 22:49:49 +02:00
Stefan Karlsson
7afb211330 OP-1474 Revert TPS debugging code 2014-09-10 00:42:40 +02:00
Alessio Morale
c777f9e194 OP-1406 - Fixes from review comments 2014-09-08 23:24:18 +02:00
Stefan Karlsson
c0152b7e19 OP-1474 Thrust PID scaling 2014-09-08 00:14:49 +02:00
Corvus Corax
4a19f98c95 OP-1156 hotfix in pathfollower code - use correct VerticalPosPI.Ki and ILimit + uavobject typo 2014-09-06 13:51:30 +02:00
Alessio Morale
233dec6d8d OP-1379 - Various fixes and additions 
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
 2014-09-06 12:11:53 +02:00
Alessio Morale
884f797d61 OP-1370 - Add SBAS configuration options 2014-09-02 21:26:56 +02:00
Alessio Morale
2ddbb72bcf OP-1370 - Fixes parameters name, values and cosmetic issues. 2014-09-02 21:26:43 +02:00
Alessio Morale
78662eb356 OP-1370 - Explicitly disable unneeded messages 2014-09-02 00:36:04 +02:00
Alessio Morale
3157c4e501 OP-1370 - Fix configuration storage on GPS 2014-09-02 00:35:26 +02:00
Alessio Morale
4715219a4b OP-1434 - Enable magFilter for CF as it is needed to get Mag data for initial estimation 2014-08-31 23:39:30 +02:00
Corvus Corax
b64326208e Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement 2014-08-31 18:43:48 +02:00
Philippe Renon
575e89f1a1 OP-1319 fixed minor spelling mistake in firmware code 2014-08-30 18:09:23 +02:00
Alessio Morale
f69e476ed3 Merge branch 'amorale/OP-1452_comusbbridge_improvements' into next 2014-08-29 20:25:29 +02:00
Alessio Morale
8418804ce4 OP-1406 - Revert magstate to non normalized values 2014-08-25 16:00:33 +02:00
Fredrik Larson
35a6807e63 Merge branch 'txpid_typo' into next 2014-08-24 10:23:14 +10:00
Laurent Lalanne
ccb97f014c OP-1241 TxPID_Bank3 : Similar bug while GET data from bank 2014-08-24 02:15:24 +02:00
Corvus Corax
6faf1a73ac OP-1456 get rid of cast_struct_to_array because it is error prone! 2014-08-24 00:16:34 +02:00
Corvus Corax
e7aa12be94 Merge remote-tracking branch 'origin/corvuscorax/OP-1454_weakleveling-hotfix' into next 2014-08-23 15:25:24 +02:00
Alessio Morale
1d3f9399c3 OP-1370 - Fix sensortype not shown for non PVT GPSs 2014-08-22 23:35:13 +02:00
Alessio Morale
5a3ea5fde0 OP-1370 - Add an option to store the configuration onto GPS 2014-08-22 23:16:38 +02:00
Corvus Corax
c5e0e58e6a OP-1454 - fix weak leveling bug 2014-08-22 22:42:12 +02:00
Alessio Morale
5bf866c96e OP-1370 - Remove autoconfig from CC (removing sat info to spare some ram and adding autoconfig does not make much sense), fixed compilation for all other targets 2014-08-22 22:34:52 +02:00
Alessio Morale
c4d5234ee6 OP-1370 - Show AutoConfig status in GPSPositionSensor 2014-08-22 22:32:57 +02:00
Alessio Morale
69b76b665c OP-1370 - Add automatic sentence rate configuration based on HW version (llh+velned etc. vs PVT) 2014-08-22 21:27:50 +02:00
Alessio Morale
f430af83c5 OP-1370 - Add configuration support for nav rate and dynamic model. 
Added stub for sentence rate configuration (enable_sentences(...))
 2014-08-22 19:00:46 +02:00
Alessio Morale
1846806d17 OP-1370 - Refactor AutoConfig code out of UBX.* 2014-08-22 10:10:21 +02:00
Alessio Morale
903a77669e OP-1370 - Add "management tasks" support for UBX, used for self configuration. 
Initial state machine asking for gps version. Configuration messages definition
 2014-08-22 02:43:30 +02:00
Alessio Morale
c6a82c5d23 OP-1370 - refactors UBX code to use a table of messages and handler instead of neverending switches 2014-08-21 19:34:36 +02:00
Alessio Morale
002c35163a OP-1370 - Add support for mon-ver ack-ack and ack-nak messages for gps hw version detection 2014-08-21 19:34:36 +02:00
Alessio Morale
b6c053565e OP-1434 - use degrees for rotation, fix Calibration gui 2014-08-21 19:34:36 +02:00
Alessio Morale
85be5ba7af OP-1434 - handle mag rotation 2014-08-21 19:34:36 +02:00
Alessio Morale
8df34b01d7 OP-1434 - Fix heapremaining data type 2014-08-21 19:34:36 +02:00
Alessio Morale
0198129a1c OP-1434 - Add 230400 to GPS port speed list 2014-08-21 19:34:36 +02:00
Alessio Morale
ce1e4e728e OP-1434 - Support for mag calibration 2014-08-21 19:34:36 +02:00
Alessio Morale
397bfdc08b OP-1434 - Add support for OP custom sentences on flight board 2014-08-21 19:34:36 +02:00
Alessio Morale
83a3822798 OP-1406 - Reenable mag offset estimation for onboard mag only right now 2014-08-21 19:34:35 +02:00
Alessio Morale
84758a6731 OP-1406 - Always feeds mag data even if invalid 2014-08-21 19:34:35 +02:00
Alessio Morale
e511190ad3 OP-1406 - Improve handling of external magnetometer, add additional settings 2014-08-21 19:34:35 +02:00
Alessio Morale
9d7a493c26 OP-1406 - Allows filtermag to switch between onboard and aux mag 2014-08-21 19:34:35 +02:00
Alessio Morale
bb085ddab9 OP-1452 - Auto enable COMBridge module if a port is configured as ComBridge 2014-08-21 11:43:36 +02:00
Alessio Morale
8940b7a50b OP-1452 - Apply ComBridge port speed change without rebooting 2014-08-21 11:42:29 +02:00
Corvus Corax
4653c77296 OP-1156 removed old pathfollower implementations 2014-08-20 17:00:50 +02:00
Corvus Corax
1540fe0716 OP-1156 cleaned up updateAutoPilotVtol() function 2014-08-20 16:02:48 +02:00
Corvus Corax
70460e593e OP-1156 fixes as suggested per review 2014-08-20 15:29:29 +02:00
Corvus Corax
760ae118e9 OP-1156 changed yaw math from interval [0..360] to [-180..180] 2014-08-16 20:48:56 +02:00
Corvus Corax
8daa5dfa12 Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification 2014-08-16 13:58:40 +02:00
Corvus Corax
915c24c8b6 OP-1156 changed PID control loops to use generic pid library, readded unnecessary integral and derivative terms to vtolpathfollower 2014-08-15 21:00:48 +02:00
Corvus Corax
b1675a2804 OP-1156 added vtolpathfollower velocity limits to attitude control 2014-08-15 19:23:41 +02:00
Corvus Corax
b562fcb02e OP-1156 fix path logic to not deviate from correct altitude too much 2014-08-15 17:56:57 +02:00
Alessio Morale
5dbbda3adc Merge remote-tracking branch 'origin/amorale/OP-1404_ublox_pvt_support' into next 2014-08-13 15:27:10 +02:00
Alessio Morale
376aa0052f OP-1379 - Initial Notify module. Supports: 
1) predefined seqences associated with each flightmode. 2) fixed table with alarm index and assciated led warn/error sequences/repetition rate.
 2014-08-13 15:18:17 +02:00
Alessio Morale
f556a5e335 OP-1379 - Split simple notification and external lednotifications libraries 2014-08-13 15:14:55 +02:00
Corvus Corax
09e8b38407 OP-1156 fixed EmergencyFlyaway detection algorithm 2014-08-12 19:12:05 +02:00
Corvus Corax
56e4127bca OP-1156: add path_direction as a source for yaw as suggested by Werner :) 2014-08-12 18:18:07 +02:00
Corvus Corax
ea4e7962a6 OP-1156 fixed wrong callback ID assignment for pathfollower callback diagnostics 2014-08-10 21:17:55 +02:00
Corvus Corax
8944419b0f OP-1156 refactored pathfollower - new unified module as delayed callback - compiles but untested 2014-08-10 19:41:40 +02:00
Corvus Corax
a3d18bb578 Merge remote-tracking branch 'origin/D-Lite/PathFollowerImprovements' into corvuscorax/OP-1156_pathfollower-unification 2014-08-10 13:53:52 +02:00
Corvus Corax
ca1923f76f OP-1156: Added new (stub template) pathFollower Module as well as builkd environment changes to compile it instead of old pathfollowers 2014-08-10 12:50:38 +02:00
Stefan Karlsson
454d491e48 Merge branch 'next' into skarlsso/OP-1397_add_responsiveness_to_txpid 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configtxpidwidget.cpp
	ground/openpilotgcs/src/plugins/config/configtxpidwidget.h
 2014-08-10 10:06:44 +02:00
Alessio Morale
1158c70a46 OP-1404 - minor cleanup, removed some duplicated code 2014-08-09 12:49:21 +02:00
Alessio Morale
2932045e3d OP-1404 Fix NMEA data parsing for GSV 2014-08-09 12:04:25 +02:00
Corvus Corax
c5fae5ee84 Merge branch 'next' into andrecillo/OP-1317_IMU_wind_estimation 2014-08-09 10:43:48 +02:00
Alessio Morale
a18009e875 OP-1429 Change datatype for elevation and azimuth respectively to int8 and int16. 2014-08-06 12:55:07 +02:00
Alessio Morale
d04d630273 OP-1404 fix include file path 2014-08-05 17:25:28 +02:00
Alessio Morale
23d2368984 OP-1404 Fix nav-pvt.pdop data type 2014-08-05 16:50:38 +02:00
Alessio Morale
ea63def1c8 OP-1404 fix compilation with PIOS_GPS_MINIMAL, fix some copy/pastem madness 2014-08-04 18:17:01 +02:00
Alessio Morale
240eb8e573 OP-1404 - Prevent mixing pvt and other sentence solution data. use PDOP from pvt 2014-08-04 17:56:28 +02:00
Alessio Morale
d3569927a0 OP-1404 fix unit scaling for pvt, use check_msgtracker, 2014-08-04 11:04:35 +02:00
Alessio Morale
6f4b1d5c03 OP-1404 uncrustify 2014-08-03 15:27:30 +02:00
Alessio Morale
c68dd3c00e OP-1404 - PVT will provide SOL+VELNED+POSLLH+Time. DOP will provide all dop values 2014-08-03 15:04:40 +02:00
Alessio Morale
1dd05c24cc OP-1404 - Fix compilation with PIOS_GPS_MINIMAL defined 2014-08-03 12:50:42 +02:00
Alessio Morale
0976fb6e1b OP-1404 - Add support for UBlox PVT sentence 2014-08-03 12:50:21 +02:00
Alessio Morale
016ba6940d OP-1403 - drop attitude/revolution as it has been supersede by StateEstimation module 2014-08-02 20:48:56 +02:00
Alessio Morale
d856bbdb50 OP-1403 - Update targets 2014-08-02 20:48:48 +02:00
Alessio Morale
57a43a5587 OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one 2014-08-02 20:48:34 +02:00
Stefan Karlsson
7f344da977 OP-1397 Round to instead of floor to uint8_t values in txpid.c 2014-08-01 14:51:39 +02:00
Stefan Karlsson
a7ee6fa764 OP-1397 Add initial support for rate mode response (deg/s) 2014-07-30 23:49:56 +02:00
Stefan Karlsson
2113e1a2e1 OP-1397 Add initial support for attitude mode response (deg) 2014-07-30 23:48:55 +02:00
Werner Backes
065ba1a0c8 Adds a 3D mode to path_vector. This allows vertical path segments without 
position changes. PathStatus now also contains correction_direction and
path_direction to make path following behaviour more transparent.
 2014-07-29 13:16:47 +02:00
Werner Backes
3e2961420d Add a 3D mode to path_endpoint. This allows FlyDirect waypoints to do 
vertical movements without changing position.
 2014-07-29 13:16:39 +02:00
Corvus Corax
5edb2dbae3 Merge branch 'andrecillo/OP-1317_IMU_wind_estimation' into corvuscorax/OP-1317_IMU_wind_estimation 2014-07-26 17:01:03 +02:00
Corvus Corax
5451003a58 Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation 
Conflicts:
	flight/modules/Airspeed/airspeed.c
	flight/modules/Airspeed/gps_airspeed.c
 2014-07-26 16:16:02 +02:00
Alessio Morale
e5b52d46d9 Merge remote-tracking branch 'origin/amorale/OP-1358_add_separate_rotation_calibration_offset_revo_only' into rel-14.06 2014-07-24 23:47:14 +02:00
Corvus Corax
a199fd1cb0 OP-1412 do not dicard mags after init 2014-07-23 22:40:43 +02:00
Andres
7f8e709e17 OP-1317 uncrustify 2014-07-23 08:04:52 +02:00
Andres
e195befc3a OP-1317 removed comments 2014-07-23 08:03:48 +02:00
Corvus Corax
95799cf11b OP-1412 delay ekf initialization until magnetometers are reporting valid data 2014-07-22 23:49:41 +02:00
Andres
ffabbc577c OP-1317 moved Butterworth filter code into flight/libraries/math/butterworth.* 2014-07-22 20:03:43 +02:00
Alessio Morale
9bee143476 OP-1358 Revo:Implement roll/pitch trim settings separated from "nominal" board rotation settings 2014-07-21 11:01:07 +02:00
Andres
df4d211f8b OP-1317 added a proper initialization of the Butterworth filter values 2014-07-20 16:22:27 +02:00
Andres
d7d20bb10f OP-1317 merge with branch corvuscorax/OP-1317_IMU_wind_estimation 2014-07-20 15:46:35 +02:00
Andres
ddde6d1f5e OP-1317 changed int into int32_t in function Quaternion2PY() 2014-07-20 15:26:05 +02:00