1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
Commit Graph

62 Commits

Author SHA1 Message Date
Oleg Semyonov
8f977a4411 Final step: lot of small fixes, last commit in this commit series
This is the first cleanup pass through makefiles and pios.
Probably it is difficult to track changes due to the nature of them.
I would recommend to look at resulting files and compiled code instead.

NOTE: original branch was rebased and lot of conflicts were fixed on
the way. So do not expect that every commit in this series will be
buildable (unlike original branch). Only final result was tested.

The main goal was to remove as much duplication of code (and copy/paste
errors) as possible, moving common parts out of Makefiles. It still is
not perfect, and mostly no code changes made - Makefiles and #ifdefs only.
But please while testing make sure that all code works as before, and no
modules/options are missed by accident.

Brief list of changes:
- Moved common parts of Makefiles into the set of *.mk files.
- Changed method of passing common vars from top Makefile to lower ones.
- Some pios cleanup, mostly #ifdefs, and all pios_config.h files.
- Many obsolete files removed (for instance, AHRS files, op_config.h).
- Many obsolete or unused macros removed or fixed/renamed (ALL_DIGNOSTICS).
- Unified pios_config.h template. Please don't remove lines for board
  configs, only comment/uncomment them. Adding new PIOS options, please
  propagate them to all board files keeping the same order.
- Some formatting, spacing, indentation (no line endings change yet).
- Some cosmetic fixes (no more C:\X\Y\filename.c printings on Windows).
- Added some library.mk files to move libs into AR achives later.
- EntireFlash target now uses cross-platform python script to generate bin
  files. So it works on all supported platforms: Linux, OSX, Windows.
- Top level packaging is completely rewritten. Now it is a part of top
  Makefile. As such, all dependencies are checked and accounted, no
  more 'make -j' problems should occur.
- Default GCS_BUILD_CONF is release now, may be changed if necessary
  using 'make GCS_BUILD_CONF=debug gcs'.
- GCS build paths are separated into debug and release, so no more obj
  file clashes. Packaging system supports only release builds.
- New target is introduced: 'clean_package'. Now 'make package' does not
  clean build directory. Use clean_package instead for distributable builds.
- Targets like 'all', 'opfw_resource', etc now will print extra contex
  in parallel builds too.
- If any of 'package', 'clean_package', 'opfw_resource' targets are given
  on command line, GCS build will depend on the resource, so all fw_*.opfw
  targets will be built and embedded into GCS. By default GCS does not
  depend on resource, and will be built w/o firmware (unless the resource
  files already exist and the Qt resource file is generated).
- fw_simposix (ELF executable) is now packaged for linux. Run'n'play!
- Make help is refined and is now up to date.

Still broken:
- UnitTests, should be fixed
- SimPosix: buildable, but should be reworked.

Next planned passes to do:
- toolchain bootstrapping and packaging (including windows - WIP)
- CMSIS/StdPeriph lib cleanup
- more PIOS cleanup
- move libs into AR archives to save build time
- sim targets refactir and cleanup
- move android-related directories under <top>/android
- unit test targets fix
- source code line ending changes (there are many different, were not changed)
- coding style

Merging this, please use --no-ff git option to make it the real commit point

Conflicts:
	A lot of... :-)
2013-03-24 13:06:24 +02:00
Oleg Semyonov
ce4b2f4446 pios_debug: use PIOS_INCLUDE_DEBUG_CONSOLE to DEBUG_PRINTF(level, ...)
Inconsistent use of debug macros in board definition files resulted in
BU compilation error. It was attempted to use PIOS_COM_SendFormattedStringNonBlocking()
directly even if PIOS_COM was not included (like for BootloaderUpdater).

So this function in pios_debug.c was replaced by DEBUG_PRINTF() macro.
The macro itself is defined in pios_debug.h file. Its definitions are
removed from board files. And to use it one has to define in pios_config.h:

#define PIOS_INCLUDE_DEBUG_CONSOLE
#define DEBUG_LEVEL <number>

in addition to PIOS_INCLUDE_COM with aux port.

Conflicts:
	flight/PiOS/Boards/STM32103CB_PIPXTREME_Rev1.h
	flight/PiOS/Boards/STM32F4xx_RevoMini.h
2013-03-24 13:05:51 +02:00
Oleg Semyonov
243c1a28ec Remove duplicated global var and defines from board definition file
Was caught using just added linker options:
  LDFLAGS += -Wl,--warn-common
  LDFLAGS += -Wl,--fatal-warnings
2013-03-24 13:04:16 +02:00
Alessio Morale
eff2cf20fd OP-878 change led used for heartbeat as OPLink has not any USB led 2013-03-23 10:56:21 +01:00
Brian Webb
be444db7f8 Added PPM output to OPLink firmware 2013-01-04 06:51:27 -07:00
Brian Webb
9225debdc1 Added initialization of the ECC, which was removed with the removal of the packet handler. Removed a couple of test functions from RadioComBridge module. Turned on watchdog timers in RadioComBridge (and RFM22B driver). 2012-12-17 19:33:42 -07:00
Brian Webb
7f6a718354 RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals). 2012-12-11 17:44:19 -07:00
Brian Webb
fecc23eb49 RFM22B/OPLink: Auto-configuration of remote com port now working. 2012-12-11 17:44:17 -07:00
Brian Webb
98026966f7 RFM22B: Added PPM packets to rfm22 driver. 2012-12-11 17:44:04 -07:00
Brian Webb
dae382564a RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings. 2012-12-11 17:43:53 -07:00
Brian Webb
a46e3cdec3 RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer. 2012-09-22 20:13:11 -07:00
Brian Webb
fad32dcc29 Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs. 2012-08-25 11:41:32 -07:00
Brian Webb
10e52b31c5 Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration. 2012-06-30 10:06:28 -07:00
Brian Webb
df8a5f8f27 Changed update period for PPM inputs on the PipX. Fixed LED code. 2012-05-31 18:56:07 -07:00
Brian Webb
701a480f01 Tuning configutation of PipX. 2012-05-24 18:08:29 -07:00
Brian Webb
2f1a9e3e7d Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout. 2012-05-20 18:30:37 -07:00
Brian Webb
563b454693 Fixed compiling of PipX bootloader. 2012-05-13 20:19:04 -07:00
Brian Webb
ec67742ff6 Added configuration of COM ports on PipX. 2012-05-12 13:16:36 -07:00
Brian Webb
290acf0398 Fixed watchdog timeouts. 2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37 Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling. 2012-05-01 19:14:58 -07:00
Brian Webb
25ffb99cee Added initialization of flash eeprom for saving settings to PipX. 2012-04-28 19:29:56 -07:00
Brian Webb
4936cd8fd2 Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX. 2012-04-10 20:22:53 -07:00
Brian Webb
7b49a6b820 Added watchdog to radio com bridge in PipXtreme. 2012-04-07 19:12:49 -07:00
Brian Webb
0f9f897870 Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream. 2012-04-07 18:17:32 -07:00
Brian Webb
56a2006fd8 Reconfigured to run on the real PipX board. 2012-04-06 18:44:31 -07:00
Brian Webb
eeb96955f9 Fixed ADC configuration 2012-04-06 17:43:43 -07:00
Brian Webb
fff93910e2 RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module. 2012-04-05 20:24:50 -07:00
Brian Webb
823b111d60 Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode (http://rscode.sourceforge.net). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX. 2012-03-18 17:43:29 -07:00
Brian Webb
ecdf150946 Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data. 2012-03-18 10:22:05 -07:00
Brian Webb
b34b849453 Added start at a modified PipX packet handler. 2012-03-15 19:29:54 -07:00
Brian Webb
d73895de7d Working PipX com relay. 2012-03-07 18:05:42 -07:00
Brian Webb
a0bdc58e5b Added framework for rfm22b com device. 2012-02-28 21:30:06 -07:00
Brian Webb
992aa3bec6 Updated PipX branch to use CDC device with a VCP (not working yet). 2012-02-25 09:07:37 -07:00
Brian Webb
01f314724b Updates to USB configuration on the PipXtreme. 2012-02-24 15:54:26 -07:00
Brian Webb
483a96c31d Some more cleanup to PipXtreme codebase. 2012-02-24 07:49:41 -07:00
Brian Webb
b69b285f58 Fixed PipXtreme bootloader. 2012-02-23 20:40:24 -07:00
Brian Webb
cf34baec69 Some cleanup on PipXtreme codebase. 2012-02-23 19:58:23 -07:00
Brian Webb
f0dfba6fc0 Re-baslined the PipX codebase using the experimental Transmitter codebase. 2012-02-21 20:29:06 -07:00
Stacey Sheldon
6bb4f0c61d leds: use boot-time config for PiOS LED layer
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().

LEDs are now named:
  PIOS_LED_HEARTBEAT
  PIOS_LED_ALARM
2012-01-22 18:22:59 -05:00
Stacey Sheldon
b94f4b49a4 usb: major refactoring of USB descriptors, CDC and HID
Summary of changes:
 * USB CDC and HID drivers are completely split apart.
   * This will allow different max buffer sizes for HID and CDC.
 * USB descriptors have been overhauled:
   * Proper structs/macros/enums declared for USB (see pios_usb_defs.h)
   * Two common descriptor definitions.  One for HID+CDC another for HID only.
     See pios_usb_desc_{hid_cdc,hid_only}.c for details.
   * Long standing bugs in OP USB descriptors became much more obvious with the
     new struct definitions.
   * Board specific USB initialization is now in pios_usb_board_data.h in each build target.
   * Definition of USB descriptors is now entirely indpendent of STM32 libs.
     Glue into STM32 libs is provided by pios_usbhook.c.
 * Removed a lot of stale/irrelevant USB #defines throughout the tree.
 * Improved naming consistency throughout USB code:
   * PIOS_USB_HID_* now refers to the HID endpoint code.
   * PIOS_USB_CDC_* now refers to the CDC endpoint code.
   * PIOS_USB_* now refers to the low-level USB code.
   * PIOS_USB_BOARD_* now refers to board-specific USB data
   * PIOS_USBHOOK_* is glue between PIOS and STM32 USB libs.
   * struct usb_* and enum usb_* and USB_* and HID_* are all types from the USB spec.
 * Shrunk the buffer size on the CDC call mgmt endpoint to save some RAM.
 * Made a few more USB related variables static to save some RAM.
2012-01-02 14:27:06 -05:00
Stacey Sheldon
eebdda6276 usb cdc: make HID/CDC configurable in hwsettings 2011-12-30 23:05:34 -05:00
Stacey Sheldon
c0259dc616 usb cdc: USB composite device with HID + VCP 2011-12-30 23:05:33 -05:00
Stacey Sheldon
c2fb0d8b43 com: allow run-time allocation of buffers 2011-07-29 15:33:14 -04:00
Stacey Sheldon
5f8760a55c com: Move buffering out of USART/HID layer and into COM layer
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.

Bytes are now pushed directly from the usart layer into the
com layer without any buffering.  The com layer performs all
of the buffering.

A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.

Misc related changes:
 - Remove obsolete .handler field from irq configs
 - Adapt all users of PIOS_COM_* functions to new API
 - Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00
Mike Smith
c3267a3b53 Remove PIOS_DELAY_TIMER definitions from configuration files, as there is no longer a delay timer to configure. 2011-07-23 13:48:40 -07:00
Stacey Sheldon
504fe7a664 dfu: fix typo WRITABLA -> WRITABLE 2011-05-24 00:58:10 -04:00
Stacey Sheldon
96827eecff build: Make all flight sw use pios_board_info_blob
Now that every bootloader build has a board info blob,
make all fw and bl images use it.

The following MACROS are removed:
  BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION,
  START_OF_USER_CODE, HW_TYPE

These values are now ONLY available from the bootloader
flash via the pios_board_info_blob symbol.  These values
must not be #defined or otherwise hard-coded into the
firmware in any way.  The bootloader flash is the only
valid source for this information.

NOTE: To ensure that we have an upgrade path from an
      old bootloader (without board_info_blob) to a
      new bootloader (with board_info_blob), it is
      essential that the bu_* targets do not depend
      on (or validate) the board_info_blob being present
      in the bootloader flash.
2011-05-24 00:58:10 -04:00
Stacey Sheldon
6e406c0232 build: remove all remaining use of -DUSE_BOOTLOADER
The USE_BOOTLOADER compile flag was only being used
to determine where the ISR vector table was located.

Provide this explicitly from the linker since it knows
exactly where it is putting the ISR vector table.
2011-05-23 18:21:42 -04:00
Stacey Sheldon
575010169a build: add pios_board_info_blob struct to bootloader flash image
The board info blob is stored in the last 128 bytes of the
bootloader's flash bank.  You can access this data from the
application firmware like this:
  #include <pios_board_info.h>

  if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) {
    /* Check some other fields */
  }

DO NOT link pios_board_info.c into your application firmware.
Only bootloaders should provide the content for the board info
structure.  The application firmware is only a user of the data.
2011-05-16 08:30:30 -04:00
pip
0d389c4d34 Forgot to comment out serial port debugging option .. sorry - again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3009 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-08 18:32:16 +00:00