1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Commit Graph

317 Commits

Author SHA1 Message Date
Karl Knutsson
d161ebbc74 OP-1522 address review comments 2015-02-02 21:25:38 +01:00
Karl Knutsson
137c183ec2 OP-1522 Remove unused channel set cfg
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
2015-02-02 21:25:38 +01:00
Karl Knutsson
a3715598c7 OP-1522 New channel allocation
Generate a pseudo random list of channels from hmac_sha1 with the
coordid as key.

Enforce channel spacing based on the frequency deviation derived
from the configured data rate.
2015-02-02 21:25:38 +01:00
Karl Knutsson
9bf18490b1 OP-1522: Channel timeout logic
Use real time rather than missed pickets when deciding if we are
disconneted. Makes the link less sensitive at higher rates since
higher rates means more chances to get a packet through within the
given time.
2015-02-02 21:25:38 +01:00
Karl Knutsson
b0491da115 OP-1576: Remove unused tx_resent counter
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
2015-02-02 21:25:38 +01:00
Karl Knutsson
52c1080ffe OP-1522 Robustness of OPLink radio
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2015-02-02 21:25:38 +01:00
Alessio Morale
632051c0ac OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot 2015-01-30 21:22:00 +01:00
Alessio Morale
1f95332ff4 OP-1683 - Implement servo synchronous update mode for F4 2015-01-23 23:50:51 +01:00
Alessio Morale
caa51253db OP-1682 - Workaround overflow issue with pwm receiver inputs on shared timers. 2015-01-19 21:55:40 +01:00
Mathieu Rondonneau
4b00f6039d OP-1626: Allow binding to happen within satellite binding window.
- This is working for satellite 22ms (genuines and clones).
 - This change only affect revo.
2014-11-29 19:59:18 -08:00
Fredrik Larsson
1687ef7e8f Merge remote-tracking branch 'origin/rel-14.10' into next 2014-11-23 12:15:32 +11:00
Fredrik Larsson
cd94410468 DSM Protocol removed flight firmware 2014-11-22 08:32:00 +11:00
Fredrik Larsson
1942d2ee30 Remove protocol enum 2014-11-22 07:44:55 +11:00
Corvus Corax
c21d3d8a67 uncrustification! 2014-11-08 12:59:16 +01:00
abeck70
942945850b Merge branch 'next' into abeck/OP_1503v3-yaffs 2014-10-23 21:25:54 +11:00
Karl Knutsson
5ab924c07e Revert "OP-1522 Robustness of OPLink radio"
This reverts commit 00d9c66867.
2014-10-16 08:23:10 +02:00
Alessio Morale
4a8cfe3f86 OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration 2014-10-10 22:33:50 +02:00
Alessio Morale
9350bd65d9 OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
Allow per board SPI prescaler settings
2014-10-10 22:33:49 +02:00
abeck70
948d6546af yaffs simposix ready for review
All yaffs changes for library inclusion, arm compilation, and simposix integration.
2014-10-10 13:21:06 +11:00
Fredrik Larsson
cb6e9fda6d Merge remote-tracking branch 'origin/havyan/oplink-0' into next 2014-10-08 08:02:48 +11:00
Karl Knutsson
00d9c66867 OP-1522 Robustness of OPLink radio
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2014-10-03 22:20:11 +02:00
Alessio Morale
e553014596 Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next 2014-10-03 00:37:55 +02:00
Alessio Morale
9e0596c2c5 Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
Conflicts:
	Makefile
	flight/targets/boards/discoveryf4bare/firmware/Makefile
	flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
c772442723 OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info) 2014-09-24 01:06:41 +02:00
Alessio Morale
f2a0daac5c OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS 2014-09-16 22:40:52 +02:00
Alessio Morale
984a7a675c OP-1275 - add ChangeBaud to PIOS_COM_MSG 2014-09-16 00:42:51 +02:00
Alessio Morale
baad216810 OP-1275 uncrustification 2014-09-16 00:42:50 +02:00
Alessio Morale
cd7c76aa13 OP-1275 move implementation specific enums out of common pios_i2c_priv.h 2014-09-16 00:42:50 +02:00
Alessio Morale
7eca9f80e3 OP-1275 Initial commit for f0 support: add CMSIS, Std Peripheral drivers 2014-09-16 00:42:48 +02:00
Fredrik Larrson
d91db0af6f Revert "Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next"
This reverts commit a39e393274, reversing
changes made to ebfdaf28b5.
2014-09-08 02:31:02 +10:00
Fredrik Larrson
a39e393274 Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
2014-09-08 01:54:59 +10:00
Fredrik Larrson
ebfdaf28b5 Merge remote-tracking branch 'origin/havyan/OP-1473_sbus_eof' into next 2014-09-08 01:35:39 +10:00
Alessio Morale
cf9329b8ee OP-1440 - Change timing slightly to support also WS2812B 2014-09-06 12:12:11 +02:00
Alessio Morale
233dec6d8d OP-1379 - Various fixes and additions
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Karl Knutsson
ec0d44e1b0 OP-1473 Fix EOF handling for R7008SB 2014-09-04 18:15:36 +02:00
Corvus Corax
b64326208e Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement 2014-08-31 18:43:48 +02:00
Corvus Corax
6faf1a73ac OP-1456 get rid of cast_struct_to_array because it is error prone! 2014-08-24 00:16:34 +02:00
Stefan Karlsson
22e981ea87 OP-922 Mark PIOS_DEBUG_Panic with attribute noreturn 2014-08-16 16:57:50 +02:00
Alessio Morale
30df5de332 uncrustify 2014-08-13 15:54:52 +02:00
Alessio Morale
cefc182a5e Merge remote-tracking branch 'origin/amorale/OP-1405_25qXXX_support' into next 2014-08-13 15:25:16 +02:00
Alessio Morale
1067ea59d1 OP-1379 - Split pios_ws2811.h in config and public api header 2014-08-12 22:19:30 +02:00
Alessio Morale
1f74977472 OP-1379 add base types for colour, Initial ext rgb led api definition 2014-08-12 09:44:44 +02:00
Corvus Corax
c5fae5ee84 Merge branch 'next' into andrecillo/OP-1317_IMU_wind_estimation 2014-08-09 10:43:48 +02:00
Gasté Olivier
dfb21482f4 DSM protocol improvement
added item in DSM protocol in GCS
2014-08-08 13:14:39 +02:00
Alessio Morale
a6502518be OP-1405 - Add support for 25qxxx series of flash memories 2014-08-02 23:05:36 +02:00
Alessio Morale
6a3cb7b808 OP-1403 - Add support for multiple hmc* devices 2014-08-02 20:48:41 +02:00
Alessio Morale
57a43a5587 OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one 2014-08-02 20:48:34 +02:00
Alessio Morale
2a8429320d OP-1403 - Support HMC5983 temperature sensor/compensation 2014-08-02 20:48:24 +02:00
Alessio Morale
3c1b689224 OP-1403 - Add generic I2C/SPI HMC5x83 mag driver 2014-08-02 20:48:16 +02:00
Corvus Corax
5edb2dbae3 Merge branch 'andrecillo/OP-1317_IMU_wind_estimation' into corvuscorax/OP-1317_IMU_wind_estimation 2014-07-26 17:01:03 +02:00
Andres
d6a93cccaf OP-1317 added M_2PI_F and M_2PI_D constants for 2*pi in pios_math.h 2014-07-23 08:03:12 +02:00
Alessio Morale
711c3609b6 OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used 2014-07-08 02:53:25 +02:00
Alessio Morale
c6a773363f Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
Conflicts:
	flight/pios/common/pios_adxl345.c
	make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
a03ad41bab Merge branch 'amorale/OP-1365_pios_instrumentation' into next
Conflicts:
	flight/modules/Attitude/attitude.c
2014-06-22 19:13:46 +02:00
Alessio Morale
fa24d21237 OP-1365 fix comments 2014-06-18 02:01:16 +02:00
Alessio Morale
b3b90f1f66 OP-943 inline pios_mem function have issues with simposix. 2014-06-11 22:15:40 +02:00
Alessio Morale
6226aec2a7 OP-943 uses pios_mem API for heap allocation 2014-06-11 22:15:40 +02:00
Alessio Morale
d8f08a7916 OP-943 Add Malloc for "FastHeap" (ccsram)
- Use a separate mallocs for thread stack and RTOS structures heap
- Add a pios_mem API to be able to use fast ram (CCM) when available
2014-06-11 22:15:30 +02:00
Alessio Morale
622519b7c2 OP-1365 Flight code instrumentation API: add documentation to pios_instrumentation_helper, uncrustification 2014-06-10 22:13:20 +02:00
Alessio Morale
8ba5741f99 OP-1365 Flight code instrumentation API: Add some helper macros to simplify the addition of instrumentation code to a module.
Note: Look at next commit for an example use case.
2014-06-10 21:34:33 +02:00
Alessio Morale
698d132f9c OP-1365 Flight code instrumentation API: Changed API to use handlers (opaque pointers) to counter struct instead of an index, fix Search function, create does check if coutner exists and return existing handler 2014-06-10 21:24:28 +02:00
Alessio Morale
a9f1d55fea OP-1227 Fix high CPU usage: Optimize Memory usage in ADC driver.
- performs undersampling in two steps operating with a half buffer at time;
- Skip costly undersampling for Temperature channel;
- some optimizations to the downsample loops;
- apply compiler speed optimization to PIOS_ADC_downsample_data()
2014-06-08 22:01:05 +02:00
Alessio Morale
a0d68c6afb OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed
Note: Counter 0xA3450001 is the time it takes to transfer the requested number of samples
2014-06-08 21:33:18 +02:00
Alessio Morale
197d381937 OP-1365 Flight code instrumentation API: Add helper function to track mean period between its calls 2014-06-07 18:11:34 +02:00
Alessio Morale
520e721bdd OP-1365 Flight code instrumentation API: PiOS Implementation 2014-06-06 22:15:18 +02:00
Alessio Morale
58bba31c72 Merge remote-tracking branch 'origin/amorale/OP-1312_pios_ws2811_driver' into next 2014-05-15 20:30:43 +02:00
Alessio Morale
8bbb56337b OP-1312 keep pulse timings low to have more margin to handle bus contentions and irq response time. 2014-05-11 18:57:06 +02:00
Alessio Morale
e5d6726bb6 Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour 2014-05-08 22:27:08 +02:00
Alessio Morale
19caa57dc6 OP-1312 fix copy/paste-naming issue 2014-05-03 11:45:30 +02:00
Alessio Morale
3897106f4d OP-1312 remove boilerplate from config using macros.
Use four locations for ch1+update dma source to exploit fifo and memory read bursts
2014-05-01 10:33:44 +02:00
Alessio Morale
a0b857337f OP-1312 Add support for Revolution (right now always active on pin3). Configurability not yet added 2014-04-26 18:40:59 +02:00
Alessio Morale
46f70a74c8 OP-1312 Initial version running on DiscoveryF4 2014-04-26 16:57:16 +02:00
Alessio Morale
f01cf66095 Merge remote-tracking branch 'origin/andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements' into next
Conflicts:
	ground/openpilotgcs/src/plugins/systemhealth/systemhealthgadgetwidget.cpp
2014-04-15 21:52:34 +02:00
Alessio Morale
299f388245 OP-1302 Add a stub pios_notify API for user interaction/notifications
right now all notifications produces the same output, the DRAW_ATTENTION sequence
2014-04-13 17:42:57 +02:00
Philippe Renon
3b7b06aad0 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2014-04-09 09:11:54 +02:00
Alessio Morale
6540c69698 Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next 2014-04-01 22:05:12 +02:00
Andres
830f13596e OP-1273 OP-1282 OP-1283 uncrustify 2014-03-31 22:17:58 +02:00
Andres
5ed417323e OP-1273 OP-1282 OP-1283 bug fixes on I2C library: check for intialization and hot-plug robustness 2014-03-31 22:16:29 +02:00
Andres
7067f4f8ff Merge branch 'andrecillo/OP-1283_SystemHealthGadgetWidget_updateAlarms_coordinate_calculation_correction' into andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements
Merged correction on coordinate calculation in SystemHealth gadget for correct display of Airspeed-Alarm
2014-03-28 17:01:44 +01:00
Andrés Chavarría Krauser
4dff86dc9c OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files 2014-03-25 10:37:10 +01:00
Alessio Morale
519d74ad1b OP-1026 fix review issues 2014-03-09 16:08:27 +01:00
Philippe Renon
b2168a4982 OP-1033 moved f1 specific usb include files to stm32f10x/inc directory 2014-03-02 14:46:01 +01:00
Alessio Morale
73d0b93829 OP-1026 Add a task monitor api to calculate idle percentage 2014-02-22 00:29:02 +01:00
Corvus Corax
7ec21a8f36 OP-942 duplicated exact API of task_monitor to also monitor callbacks
This allows cleaner and fine grained handling of STACKOVERFLOW alarms
2014-02-07 22:39:16 +01:00
Corvus Corax
9a6072d58c Merge branch 'next' into corvuscorax/OP-942_task-diagnostics-for-callbacks
Conflicts:
	flight/targets/boards/simposix/firmware/Makefile
2014-02-07 00:31:32 +01:00
Corvus Corax
6566a29054 OP-942 reliable and fast free stack test algorithm - will always 'see' overflows 2014-02-06 23:54:30 +01:00
Corvus Corax
723e22aa1a OP-1211 time_measurement_helper 2014-02-04 19:05:17 +01:00
Corvus Corax
49a1c4c28f OP-942 refactored callback scheduler to fit into PiOS naming scheme 2014-02-02 22:08:16 +01:00
Corvus Corax
5b9a17f630 OP-942 moved DelayedCallbackScheduler into pios/common 2014-02-02 20:31:37 +01:00
Alessio Morale
7188394e39 Uncrustification 2014-01-19 12:37:25 +01:00
Mikael Blomqvist
b1d2c1b83e Adding R7008SB end byte as a possible end of frame check for S.Bus 2014-01-03 18:25:44 +01:00
Corvus Corax
be9faabe92 Merge branch 'next' into corvuscorax/onboardlogging 2013-11-26 00:34:01 +01:00
Alessio Morale
bacc4d3d79 Merge branch 'master' into next
Conflicts:
	flight/targets/boards/oplinkmini/firmware/pios_board.c
	ground/openpilotgcs/copydata.pro
2013-11-25 01:12:10 +01:00
Corvus Corax
fcc479f5cb more intelligent log interfacing, including flash formatting option 2013-11-17 20:14:50 +01:00
Corvus Corax
6031200aea Some fixes in debuglog to compile and run on all firmware platforms 2013-11-17 18:04:47 +01:00
Corvus Corax
a0746d87fa Logging facility: logs debug data to logfs and exports it through container UAVObject 2013-11-17 02:54:26 +01:00
Alessio Morale
e91bc28667 OP-1058 Get rid of Unions.
They caused stack usage increase with -fstrict-aliasing as stack slots are not reused when dealing with unions.
It has now been added the cast_struct_to_array macro in pios_struct_helper.h to handle such case where it is useful to access those homogeneous structs as arrays

+review OPReview-552
2013-09-01 12:10:55 +02:00
Brian Webb
5ac1f33c47 Adds missing pios_gpio_priv.h 2013-08-02 22:01:44 -07:00
Brian Webb
e246ecf536 Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs. 2013-07-28 07:01:08 -07:00
Richard Flay (Hyper)
c3e3521001 OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes
longer than 150ms.
2013-07-28 01:16:22 +09:30
Alessio Morale
11bc7804d0 Merge branch 'amorale/OP-994_adc_cleanup' into next 2013-07-16 12:23:25 +00:00
Brian Webb
c2df59498b Merge remote-tracking branch 'origin/master' into next 2013-07-06 07:08:30 -07:00
Brian Webb
491e5fe685 Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes. 2013-06-29 15:00:38 -07:00
Brian Webb
2aea2342ab OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo. 2013-06-26 18:01:54 -07:00
Brian Webb
61c453f6ff Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only. 2013-06-26 17:59:33 -07:00
Brian Webb
774a74884a OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo. 2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319 OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device. 2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152 OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem. 2013-06-26 17:56:20 -07:00
Brian Webb
7c10623615 OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible. 2013-06-26 17:56:10 -07:00
Brian Webb
ac75af55c1 OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h 2013-06-26 17:55:56 -07:00
Corvus Corax
6163c5f53a Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
	ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
	ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
	ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
	ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
2013-06-22 18:44:03 +02:00
Alessio Morale
5cc3645b96 Uncrustify 2013-06-18 20:23:46 +02:00
Corvus Corax
1d17d08cca Merge branch 'next' into corvuscorax/OP-947_stateestimator-module 2013-06-12 18:32:01 +02:00
Alessio Morale
e9b3ee52f3 OP-997: add fields to SystemStatsUavo to monitor storage status 2013-06-09 19:20:00 +02:00
Corvus Corax
022f1a1ac0 Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
Conflicts:
	flight/modules/Attitude/revolution/attitude.c
2013-06-09 13:49:52 +02:00
Alessio Morale
107b930573 Merge remote-tracking branch 'origin/amorale/OP-980_revolution_usb_reconnect' into next 2013-06-09 09:07:24 +02:00
Alessio Morale
51a7f27b99 OP-994 Add an API to PIOS_ADC to get directly the Voltage value 2013-06-08 13:36:54 +02:00
Corvus Corax
6fdf554d4a Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
Conflicts:
	flight/modules/Attitude/revolution/attitude.c
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Alessio Morale
ee7887c406 OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid
+review OPReview-501
2013-06-06 10:26:41 +02:00
Mathieu Rondonneau
45391abd55 OP-976: RE-run uncrustify 2013-06-05 19:48:56 -07:00
Mathieu Rondonneau
a8c946dcb2 OP-976: Fix uncrustify changes that put a space before the ";" in the macro 2013-06-05 19:46:55 -07:00
Mathieu Rondonneau
d2fae1abed OP-976: fixing function name in the macro although don't have any effect since the linker directives are local. 2013-06-05 19:15:47 -07:00
Alessio Morale
5fa73624da OP-980 Added memory barrier to preserve sequence to ensure callback validation
+review OPReview-501
2013-06-06 01:39:45 +02:00
Corvus Corax
6f6ca2481e Changed CoordinateConversion to use doubles for LLA2NED conversion, so coordinates can be represented in ECEF with sufficient resolution 2013-06-05 20:40:49 +02:00
Alessio Morale
ce2bce353f OP-980 Fix usb reconnection issue for Revolution target.
step 2: check for cable disconnection (vbus) and issue a SW reconnection
2013-06-05 00:04:26 +02:00
Mathieu Rondonneau
23b2907d08 OP-976: Add the ';' back
This compile successfuly with make all_flight
2013-06-03 20:37:40 -07:00
Corvus Corax
40864b2d3b some cleanups 2013-05-23 21:21:14 +02:00
Corvus Corax
843db63cf6 some last issues from review 2013-05-22 23:08:48 +02:00
Brian Webb
ac4847c8ac OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup. 2013-05-21 19:48:21 -07:00
Brian Webb
d4a4588011 OP-932 Changes the RFM22 frequency hopping to change channels every Tx period. Also increases the Tx clock period from 8ms to 16ms, and adds a check on calculation the the time delta that it doesn't change the previous estimated time delta by too much. If the delta between the current time delta and the previously estimated time delta is too large it could indicate that there was a delay somewhere that makes the calculated time delta inaccurate.
Rearanges the packet send priority in the rfm22b driver so that PPM packets are top priority.
2013-05-20 20:49:24 -07:00
Sexy Pony
900f643bbd Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES 2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3 Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
Conflicts:
	flight/pios/stm32f10x/library.mk
	flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
c1f767b12d Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
Conflicts:
	flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
67e41c34fc Merge remote-tracking branch 'origin/next' into amorale/usb_fixes 2013-05-17 22:46:42 +02:00
Richard Flay (Hyper)
a6aedee9fa Merge branch 'next' into brian/support_inverted_USB_vsense 2013-05-17 05:54:42 +09:30
Richard Flay (Hyper)
031ea3e069 Merge branch 'next' into brian/code_cleanup_130514 2013-05-17 05:49:38 +09:30
Brian Webb
156109bb88 Added support for an active low USB vsense line. 2013-05-14 20:37:13 -07:00
Brian Webb
1608d11416 Cleans up some compiler warnings/erros and adds missing ifdefs around some e.g. WDG calls. 2013-05-14 20:22:54 -07:00
Stacey Sheldon
e16be98224 usb cdc: ensure com buffer is drained when no DTE is attached
The CDC layer on F1, F3 and F4 now always acts like an
infinte data sink whenever *either* there is no DTE present
(ie. no terminal program listening) *or* the USB cable is
disconnected.

F1 and F4 were previously checking the cable but not the DTE.
F3 didn't check anything.  The COM layer didn't even ask the
lower layers.

All of this used to mean that any time a caller did a blocking
send to a CDC device without a DTE, it would eventually block
for up to a 5s timeout waiting for space in the Tx buffer.

Conflicts:
	flight/PiOS/STM32F30x/pios_usb_cdc.c
2013-05-11 22:40:58 +02:00
Stacey Sheldon
02addaf4a0 usbhook: make ctrl endpoint OUT treat request as const
The req parameter is passed to the OUT stage as a convenience.
Since the OUT callback is called *after* the transfer has occurred,
modifying the req would have absolutely no effect.  Marking this
as const makes this expectation clear.
2013-05-11 22:38:25 +02:00
Richard Flay (Hyper)
04f59d5910 OP-950: Adds "higher priority task woken" logic to SPI and SPI bus resident
sensor device drivers. Based partly on code contributed by lilvinz.

+review OPReview
2013-05-11 16:18:34 +09:30
Richard Flay (Hyper)
cf14608ebe Merge branch 'next' into hyper/OP-936_task-monitor-rework 2013-05-09 19:25:02 +09:30
Stacey Sheldon
8ab50bca13 flashfs: use uintptr_t instead of uint32_t in flashfs API 2013-05-08 19:42:01 +02:00
Stacey Sheldon
99e61dd617 logfs: support multiple instances of logfs
Conflicts:
	flight/pios/common/pios_flashfs_logfs.c
	flight/pios/inc/pios_flashfs_logfs_priv.h
	flight/tests/logfs/pios.h
	flight/tests/logfs/pios_config.h
	flight/tests/logfs/unittest.cpp
2013-05-08 19:28:11 +02:00
Alessio Morale
93bad2e8c2 Merge branch 'amorale/OP-917_f4_bootloader_updater' into next
***** PLEASE NOTE  ***** From this revision all F4 based boards (Revolution/OSD) needs bootloader version  5 to boot properly

Conflicts:
	flight/pios/stm32f4xx/libraries/CMSIS2/Device/ST/STM32F4xx/Source/osd/system_stm32f4xx.c
	flight/targets/boards/osd/board-info.mk
	make/boot-defs.mk
	make/common-defs.mk
2013-05-07 21:02:41 +02:00
Richard Flay (Hyper)
fbc8bc698f OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
and brings the callback scheduler into the fold.

+review OPReview-461
2013-05-06 19:11:14 +09:30
Brian Webb
ae8286e99a OP-932: Fixes a bug that was preventing setting of Tx power on remote modem. 2013-05-06 01:03:15 +01:00
Richard Flay (Hyper)
a2d8544931 OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.

+review OPReview-459
2013-05-05 16:32:24 +09:30
Brian Webb
84a0f981e0 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver 2013-05-03 14:08:40 +01:00
Richard Flay (Hyper)
84e1a81f8b OP-936: Moves the task monitor code out of the flight library and into PiOS.
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.

+review OPReview
2013-05-03 07:01:14 +09:30
Brian Webb
8c763c8ed3 OP-932: Improves the timing of channel changes on the radio device. 2013-05-01 14:37:47 +01:00
Brian Webb
a7d606dfe9 OP-932: Syncronize start of transmissions using the same coordinated clock as used by FHSS. 2013-05-01 03:46:46 +01:00
Brian Webb
2201d9d2bb OP-932: Continued cleanup and modularization of radio code. Also fixed a bug that held the SPI lock when an error occured in an Rx. 2013-05-01 03:14:35 +01:00
Brian Webb
ef18319306 OP-932: Continued cleanup and modularization of the RFM22B radio code. Low-level radio driver has mostly been split out of the higher-level state machine. 2013-05-01 03:14:23 +01:00
Brian Webb
94cb92f410 OP-932: Additional restructuring of radio code. 2013-05-01 03:14:11 +01:00
Brian Webb
cb24d3266e OP-932: Hold SPI bus semephore through multiple read/write transactions. 2013-05-01 03:13:58 +01:00
Brian Webb
8c59271d48 OP-932: Store the device status in bitfields with meaningful names. 2013-05-01 03:13:48 +01:00
Alessio Morale
41ecc09c3f OP-917 Various review fixes:
-Fixed casing for PIOS_BL_HELPER_FLASH_ERASE_BOOTLOADER
-fixed wrong condition in f1 bl_helper
-other cosmetic changes and use of stdbool in f1 pios_bl_helper
-remove now unused macros

+review OPReview-456
2013-04-28 10:19:08 +02:00
Alessio Morale
78498910cf OP-917 Moved all the flash architecture related code to pios_bl_helper, get the flash addresses from board defines, major cleanup.
+review OPReview
2013-04-27 15:15:28 +02:00
sambas
9fec3f5567 Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext 2013-04-27 13:39:58 +03:00
Richard Flay (Hyper)
fd1181959c Merge branch 'hyper/OP-913-flight-uavo-alignment' into next 2013-04-27 18:19:01 +09:30
Brian Webb
bb6986ea04 OP-914 - Converted PIOS_RFM22B_Validate back into a normal function from an inline. 2013-04-27 01:45:19 +01:00
Brian Webb
a9079bfb7e OP-914: Additional cleanup of the RFM22B driver code. Updated to code to the current coding standard. Added Doxygen documentation. Rearranged functions into functional groups to simplify reading the code. 2013-04-27 01:44:55 +01:00
Brian Webb
77b99cdafa OP-914 - Converted PIOS_RFM22B_Validate back into a normal function from an inline. 2013-04-27 01:44:39 +01:00
Oleg Semyonov
18f7d7488b Fix directory name case for merged sambas/diffnext 2013-04-26 17:07:44 +03:00
Oleg Semyonov
e2fd821e97 Merge remote-tracking branch 'origin/next' into sambas/diffnext
Conflicts:
	make/common-defs.mk
2013-04-26 16:31:19 +03:00
Oleg Semyonov
b6e1331e5d Rename flight/PiOS->flight/pios 2013-04-25 13:13:41 +03:00