Philippe Renon
fe9658a27b
uncrustify
2017-01-14 16:18:13 +01:00
Vladimir Zidar
fef715b3d6
LP-463 Use correct timer clock for F1 target. All timers get 72M clock regardless of APB domain they live on.
2017-01-01 17:17:58 +01:00
Vladimir Zidar
dad4a94036
LP-415 Consolidate F1 & F4 version into single one that lives in pios/common/
2016-12-28 13:25:50 +01:00
Vladimir Zidar
64bf884f96
LP-391 Changed PIOS_COM_Init buffer len parameters to uint16_t type. Fixed simposix pios_board.c GPSPORT_GPS init incorrectly passing -1 to PIOS_Board_configure_com() which was on some platforms converted to large unsigned value.
2016-11-26 21:51:29 +01:00
Vladimir Zidar
107aa2170e
LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init().
2016-08-30 02:03:10 +02:00
Laurent Lalanne
34f55ffbe2
LP-298 Use PIOS_Board_configure_ibus() for all boards - Missing define for RevoNano
2016-08-05 20:49:34 +02:00
Laurent Lalanne
5895468f08
LP-298 Port Ibus Input driver from dRonin - Not tested
2016-08-03 19:09:05 +02:00
Vladimir Zidar
873950b071
LP-364 Added MAVLink support to remaining target boards: sparky2, revonano and coptercontrol.
2016-07-24 22:26:29 +02:00
Vladimir Zidar
a0e7859dd1
LP-365 replace com port boilerplate code with calls to PIOS_Board_configure_com()
2016-07-21 23:52:23 +02:00
Laurent Lalanne
b6ed0d9c9c
LP-326 Increase CC3D Receiver stask size
2016-05-31 08:05:12 +02:00
Laurent Lalanne
fc07b26547
LP-326 Support up to 16 PPM channels
2016-05-31 08:04:41 +02:00
Vladimir Zidar
e12967e45a
Merge remote-tracking branch 'upstream/next' into LP-291_port_UAVOMSPBridge_from_dRonin
2016-05-15 22:16:47 +02:00
Lalanne Laurent
c3f0d693b5
Merged in alessiomorale/librepilot/amorale/LP-150_slower_attittude_est_cc (pull request #239 )
...
LP-150 slower attittude estimation for CC/CC3D
2016-05-09 12:21:56 +02:00
Alessio Morale
e14e5febe2
LP-150 - prevent stab error conditions
2016-05-03 01:00:28 +02:00
Alessio Morale
6bd6ef5be1
LP-150 - Run attitude estimation at a configurable fraction of gyro sample rate for CC/CC3D
2016-05-03 01:00:06 +02:00
Laurent Lalanne
214ae849a2
LP-233 Add MultiShot 5 - 25µs pulses
2016-05-02 20:24:03 +02:00
Laurent Lalanne
32a6de6b79
LP-233 Support OneShot42
2016-05-02 20:24:03 +02:00
Vladimir Zidar
f04d44de30
LP-291 Added MSP support to all boards (revolution, revonano, revoproto, discoveryf4bare and coptercontrol)
2016-04-22 03:30:38 +02:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Cliff Geerdes
2ae1f9c63d
LP-212 DJI GPSMag support
2016-02-16 15:23:36 -05:00
Fredrik Arvidsson
0d660d33ad
LP-104 LP-196 Changes to address review comments and then uncrustification.
2016-01-16 12:19:34 +01:00
Fredrik Arvidsson
c06fb0249f
LP-104 LP-196 Uncrustify and some other formatting issues fixed.
2016-01-10 10:12:54 +01:00
Fredrik Arvidsson
02c981388a
Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09
...
# Conflicts:
# flight/targets/boards/coptercontrol/board_hw_defs.c
# flight/targets/boards/coptercontrol/firmware/pios_board.c
# flight/targets/boards/revolution/board_hw_defs.c
# flight/targets/boards/revolution/firmware/inc/pios_config.h
# flight/targets/boards/revolution/firmware/pios_board.c
# flight/targets/boards/revonano/firmware/inc/pios_config.h
# flight/targets/boards/revonano/firmware/pios_board.c
# shared/uavobjectdefinition/hwsettings.xml
# shared/uavobjectdefinition/manualcontrolsettings.xml
# shared/uavobjectdefinition/receiveractivity.xml
2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
c48c46b8ef
LP-196 Cleaned up some configuration. Ex.Bus only available on Flexiport.
2016-01-09 16:07:13 +01:00
Fredrik Arvidsson
6a3a822c87
LP-104 Cleaned up configuration. Only Allow HoTT on flexi port.
2016-01-09 15:50:52 +01:00
Fredrik Arvidsson
359266ab7a
LP-104 Removed support for HoTT on Main port on coptercontrol target since it does not work.
2016-01-07 13:01:46 +01:00
Fredrik Arvidsson
08237a1ff5
LP-196 Removed EX.Bus on Main port for CopterControl target since it is not working.
2016-01-06 17:17:02 +01:00
unknown
d00c169dbb
LP-196 Fixed bug in Ex.Bus decoder and changed baud rate for UART to 125 kbaud.
2016-01-03 18:27:14 +01:00
Fredrik Arvidsson
3e920bc5bc
LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet.
2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
5273df263c
LP-104 Reverted stack size for receiver module after testing.
2015-12-20 21:11:15 +01:00
Fredrik Arvidsson
7a95050381
LP-104 Added missing code to receiver.c to detect receiver activity. This probably caused a crash on any activity of the HoTT receiver.
...
Added 40 bytes to the receiver stack.
Added options to receiver activity.xml uavo definition.
2015-12-20 13:36:45 +01:00
Fredrik Arvidsson
e6d4638201
LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port.
...
Still work in progress. Only supports CopterControl target and crashes on input :(
2015-12-20 11:08:15 +01:00
Alessio Morale
70faa04b0a
LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers
2015-11-08 18:47:31 +01:00
a*morale
792835c009
Uncrustify
2015-09-05 11:49:43 +02:00
Alessio Morale
b88681c69f
LP-97 - Move the common Init process within the System module (coptercontrol/revolution)
2015-09-03 23:40:24 +02:00
James Duley
e308039206
LP-99 Decouple flight build
...
Moved flight make code into flight/Makefile. This should speed up
rebuilds for GCS and keeps the top level Makefile tidier.
Change-Id: I9d33cb5c223b6a8ed2821435a5d63ecf4b97c6b8
2015-09-02 19:34:58 +12:00
Alessio Morale
538a137bf6
Merged in f5soh/librepilot/laurent/LP-92_Feed_forward_remove (pull request #33 )
...
Laurent/lp 92_feed_forward_remove
2015-08-21 13:35:10 +02:00
Roy Bekken
ad84547637
Update all changed files against GIT log with copyright headers consistency.
2015-08-19 16:15:58 +02:00
Laurent Lalanne
99975bf9b0
LP-92 Reduce Actuator stack size - Increase System stack size for diags
2015-08-14 10:59:53 +02:00
m_thread
9ba63ea124
LP-69 Added SRXL support to CopterControl targets.
2015-07-30 15:30:59 +02:00
Alessio Morale
6a60910e19
LP-05: fix for toplevel makefile changes
2015-07-19 14:07:48 +02:00
a*morale
62a585c188
LP-5 - Include missing UAVOs, add removed cc fields into hwsettings
2015-07-15 00:07:50 +02:00
a*morale
dd6c6054e9
Revert "OP-1810 FOC"
...
This reverts commit 92e50c2ead
2015-07-15 00:07:50 +02:00
abeck70
92e50c2ead
OP-1810 FOC
...
Squashed commit for clean commit as discussed in code review
Uncrustify
2015-05-13 17:19:51 +10:00
Alessio Morale
6d9bb8a287
OP-1857 - Enable PPM On Flexi Port
2015-04-25 20:21:56 +02:00
Alessio Morale
81b9d2e379
OP-1743 - Raise manualcontrol stack
2015-02-24 22:03:18 +01:00
Alessio Morale
84465ae0cb
OP-1743 - Fix a very ugly error in attitude(cc/cc3d)
2015-02-24 22:02:25 +01:00
abeck70
0cd7e20425
Merge branch 'amorale/OP-1685_various_fixes' into test-oneshot
2015-02-23 16:47:12 +11:00
Alessio Morale
ad42ca7f16
Merge remote-tracking branch 'origin/amorale/OP-1658_sensor_overhaul_next' into next
2015-02-22 16:28:04 +01:00
Alessio Morale
60abae8a8b
OP-1685 - Rename PIN6 to PIN8 (that's Input6)
2015-02-22 13:25:07 +01:00
