rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
1,622 Commits 5 Branches 8 Tags 266 MiB
9c94db6dd7
Commit Graph

724 Commits

Author SHA1 Message Date
zedamota
d71ade8227 OP-21/Flight Bootloader - Now if USB not connected it jumps directly to FW. If connected it will wait 5 seconds for command, then jumps. Also changed led flashing to PWM and created a timer for the delays. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1409 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 22:31:14 +00:00
peabody124
8dd81443be OP-122 Flight: Same changes regarding 62 byte limit applied to the receiving code on the device. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1405 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 05:32:56 +00:00
peabody124
dd491160c5 OP-121 OP-122 Flight: Improved the Blocking/Nonblocking behavior for USB to be correct. I'd like a mutex still around the transmission buffer but don't want to slow down the interrupt. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1404 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 05:32:54 +00:00
peabody124
4ca10e92c7 OP-121 OP-122 Flight: Improved USB HID communication. 
1. Added reenumeration function and call it on USB init (device will appear after reprogramming now)
  2. Moved buffer.c to general flight/Libraries location
  3. Removed the 62 byte transmission limitation by adding a transmission buffer
  4. Sped up USB communication by increasing endpoint polling frequency

Note, that the nonblocking and blocking USB send functions are not blocking entirely correcting.  The blocking calls the nonblocking, and the nonblocking blocks until the last chunk has started tranmission if it's a big transmission.  The buffering I added would generalize to non-blocking nicely, but would require using the EP1(IN) callback to handle most of the tranmission.  This creates a lot of issues if one function is pushing data onto the buffer and the interrupt is sending.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1403 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 05:32:52 +00:00
andrew
b467b419e6 OP-103, UAVObject update. 
Adding settings for configuring CCPM mixing for Helicopters to ActuatorSettings and SystemSettings UAVObjects.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1402 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 00:55:15 +00:00
zedamota
6da48dcc1a OP-21/Flight Bootloader Changed packet size to 64byte 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1398 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-24 18:26:44 +00:00
zedamota
f91ae974a7 OP-21/Bootloader Small change. Now turns off interrupts before jumping to code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1393 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 21:30:09 +00:00
peabody124
2db294caf7 OP-125 Flight: Changed GPS stack size to a bit closer to what the internal model needs to get rid of out of memory warning, but it could still use 1k less if it pulled all the constants from flash when needed and computed the time difference when called. Also changed ManualControl so it checks the active control values to determine the warning, so if GCS is controlling the warning light goes out. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1387 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 06:03:19 +00:00
peabody124
beac0c0ea9 AHRS: Get the signs for the simple algorithm correct 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1385 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 04:12:14 +00:00
peabody124
e94d3d3846 AHRS/Flight: Allow selecting simple algorithm as well as INSGPS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1384 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 03:51:08 +00:00
peabody124
bd8fffe4d0 AHRS/Flight: Renamed AttitudeSettings to AhrsSettings to make it more intuitive. Added the ability to change the algorithm from GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1383 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 03:39:13 +00:00
peabody124
b32184d1ec OP-119 Flight: Converted HomeLocation object to use cm for the home base instead of floating point. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1382 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 02:49:53 +00:00
peabody124
2596f43511 OP-120 AHRS: Moved conversion of quaternion to RPY over from AHRS to OP to minimize transfer and computational load on AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1381 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 02:35:39 +00:00
peabody124
0d11493337 Flight: Added mixer settings for elevon. Also added bound checking on servo outputs which becomes important when multiple things are mixed and you want to use the full range. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1380 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 01:54:58 +00:00
cwabbott
19f6db79be Added ManualControl to the win32 and posix makefiles. Also fixed a compiler error about "No newline at end of file." 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1379 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 00:52:56 +00:00
zedamota
002c746076 OP-21/Bootloader deleted old one, commited new one. Partly functional, but slow due to current packet size. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1378 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 19:51:55 +00:00
peabody124
2e705e6836 OP-116 AHRS: Made data going to the AHRS in NED format. Once the final estimate object is created I'll repeat the same calculation to populate it, although we want to avoid going back to LLA format on the OP because the CPU requirements are excessive. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1376 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 19:01:36 +00:00
zedamota
6adc834d9b OP-21/Flight Prep work for the USB HID bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1375 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 18:57:29 +00:00
zedamota
2daa229a2d OP-21/Flight Prep work for the USB HID bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1374 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 18:56:00 +00:00
zedamota
b0d1d0dd09 OP-21/Flight Prep work for the USB HID bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1373 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 18:54:57 +00:00
peabody124
60332efec0 OP-118 AHRS: Missed the auto generated files for the default values. Also no idea why last patch changed navigationsettings - either make uavobjects does differently on different platforms or someone forgot to run make uavobjects. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1372 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 17:02:12 +00:00
peabody124
0862d64b8c OP-118 AHRS: Made default calibration values friendly for people. Also fixed bug that would repeatedly trigger calibration when it was requested. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1371 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 16:43:00 +00:00
sambas
7859a130e8 Fixed bug that caused Object Browser to crash 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1369 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 08:59:18 +00:00
pip
78868216ca Fixed UART-1 structure definition error (pios_usart_cfg pios_usart_serial_cfg) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1368 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 08:59:00 +00:00
cwabbott
e27adf700b Fix posix and win32 makefiles for recent UAVObject changes. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1367 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 00:59:12 +00:00
peabody124
5662d85c4e OP-120 AHRS: Tightened up the communication protocol so it runs more quickly. Looks ok in gdb but GCS not crashing right now (rendering error) so I can't test it properly. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1366 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 00:21:54 +00:00
corvus
9bb085b7fc Documentation: Added Flowchart for HiTL mode 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1365 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 23:05:12 +00:00
peabody124
8897c441fa OP-118 AHRS: Added AHRSCalibration object and messages associated with that to AHRS. Also made AHRS run calibration only when requested. We will create a GCS plugin that runs through computing the calibration settings. To compute the variances on the AHRS set the measure variances to true, wait ten seconds, then set it to false to read it back. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1363 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 21:46:02 +00:00
patrick
564a68e825 PipBee: Updating project files to fix compile errors. Routine just toggles each LED successively. There is a known error when enabling the PIOS_COM_Init(); or more specifically PIOS_USART_Init(); which blocks at some point when called. This may be due to the pios_board.c defines which I will check later today. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1361 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 20:01:37 +00:00
pip
227b389e99 Attempt 2 - trying to get LEDs to flash 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1359 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 18:14:18 +00:00
pip
519ce846ee Just trying to get a simple 'Hello World' program going (LED flashing) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1358 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 17:14:34 +00:00
stac
b36d251bd9 ahrs: remove debug code in attitude handler 
Debug code was previously using the q4 element
in the attitude message to encode a cycle counter
to measure performance on the AHRS.  This is no
longer valid.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1357 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:23:14 +00:00
stac
26e257d340 spi: slow down OP <-> AHRS spi link 
Issues have been reported with CRC errors
on the SPI link between the OP and AHRS
boards.  Slowing the link down eliminates
the errors in my testing.

If we speed this link back up in the future,
further investigation will be required to
diagnose the source of the CRC errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1356 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:20 +00:00
stac
635df28c34 GPSPosition: Add new UAVObject for GPSPosition 
This object is not yet populated or used.  This
will soon hold the raw position data from the GPS
receiver.  PositionActual will be converted to
hold the computed position from the AHRS.

Contents of this object are still subject to change.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1355 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:18 +00:00
stac
7f85143bd2 OPModule: updated GPSPosition object 
Updated GPSPosition module to reflect the planned use
of a fixed a fixed point encoding for lat/lon.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1354 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:16 +00:00
stac
f388deef34 hmc5843: standardize line endings 
This file had mixed line endings.  Now they're all the same.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1353 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:14 +00:00
stac
a960d6e1b1 GPS: fix typo desimal->decimal throughout 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1352 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:12 +00:00
stac
7b2111e512 baroaltitude: rename AltitudeActual to BaroAltitude 
This is to align the object names to matches the UAVObject
architecture doc.  No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1351 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:10 +00:00
stac
47c36b3da0 i2c: fix error in FSM for restarted reads 
The transition from the ADDR state to the read state
was broken for non-final reads.  The FSM diagram was
also wrong for this transition.

Since reads are always the last transaction in a sequence
in our current usage, this doesn't actually fix any known
bugs.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1350 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:06 +00:00
stac
98822bff98 i2c: force bus free on warm starts 
Since the i2c bus is bidirectional, there are certain
states (eg. part way through a read) where the slave
device is in control of driving the SDA line.

On a cold start (power on), the slave devices are all
quiescent and will not drive the bus.  However, on a warm
start (eg. watchdog or jtag restart), it is possible that as
the CPU boots, the slave device may be holding the SDA line
low.  This is a bus busy condition and will prevent the I2C
bus master in the CPU from being able to seize the bus during
init.

The fix for this is to clock the i2c bus sufficiently to ensure
that the the slave device finishes its transaction and releases
the bus.

Once the slave has released the bus, the bus master can properly
initialize and assert a STOP condition on the bus.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1349 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 16:19:02 +00:00
peabody124
ba4dc14cea OP-124 Flight: Added fields to the AHRSStatus to track failures of each of the SPI message types. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1347 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 09:21:39 +00:00
peabody124
bb79ba66fa OP-119 AHRS: Converted the big data structures for the WMM calculation to be allocated on the stack, which forced a dependency on FreeRTOS :-( but keeps things on the heap. Also changed the HomeLocation object to include a Set field. When this is false, OP will try and update it whenever it gets a 3D fix. If it is saved to disk with this field as true, then it won't need to get a lock to send the magnetic flux vector to the AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1346 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 08:35:44 +00:00
peabody124
4b0a0236d8 OP-119 AHRS: Increased GPS stack size to allow WWM to not overwrite other memory. In addition converted all the calls to use pointers so I will switch to using pvPortMalloc vPortFree to get it off the stack entirely. Now correctly computing flux for me and running. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1345 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-21 08:35:41 +00:00
peabody124
2031cfe4d0 OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-20 22:52:13 +00:00
peabody124
86766ecc14 OP-119 AHRS: Removed WMM computation for now because it was triggering a reset (probably not watchdog) which is weird - it worked on AHRS. Maybe running out of memory? Also added the break on comm error in ahrs_comms to resync with it. I think the message to send the home location is also not working right now. Fixed chip reset. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1340 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-20 14:48:02 +00:00
peabody124
ef0b307353 [OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-19 20:38:27 +00:00
FredericG
fd986f3437 OP-90 Configuring the ET OSD without eLogger. The module can now read a opaque config-file from the SD-card card and send it to the OSD 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1336 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-19 17:32:18 +00:00
peabody124
3c4def13cc AHRS: Added message to pass GPS information into AHRS from OP. This is then converted 
into NED reference frame and used in the INSGPS algorithm, although currently this
information isn't propagated back to OP.  Data structures related to the GPS position
into the algorithm and the position estimate out will likely be in flux.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1334 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-19 05:18:34 +00:00
peabody124
8bcff21184 Flight: Made the actuator module perform a get after set to allow configuration module to override servo position. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1329 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 20:47:36 +00:00
FredericG
0b9079e277 ET OSD: removed existing debug and config code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1327 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 19:15:43 +00:00
peabody124
cfd20922cd AHRS: Added the filtered data to the attitude raw object. Even though this seems like an oxymoron it's still raw to the EKF algorithm, and nice to see the real values after filtering to make sure nothing weird is going on. However, if people don't like this I'm open to suggestions/patches. I'd maybe suggest the whole attituderaw object be converted to ahrsraw anyway since it's more like that (eg. none of the values are actually attitude estimates). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1325 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 14:54:24 +00:00
peabody124
fda6fc8371 Merge branch 'mac_support' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1324 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 14:29:53 +00:00
peabody124
450cf07a89 AHRS: Keeping magnetometer I2C address consistent with change to I2C driver. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1323 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 13:54:15 +00:00
FredericG
b46bc68e96 "addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 10:04:55 +00:00
FredericG
be2f5bbf70 ET OSD: Adapt to new I2C API 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1316 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 09:31:54 +00:00
peabody124
4cba4929c2 AHRS: Fixed another bug in decimation code - I stupidly used Matlab 1 based indexing. Adjusted timing of AHRS so it can process all the data and doesn't miss updates. Finally adjust all inputs to INS to have correct sign and orientation (I think). This is X is forward, Y is right, and Z is down which is mentioned in the forum as our standard and fits the algorithm. The magnetic sensor driver should be modified to return in this order (currently reads X,Y,Z registers which maps to left, back, up) but maybe since it's a board dependent orientation it's better where it is. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1315 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-18 05:47:44 +00:00
dschin
9ae9c87574 Six point sensor cal for accels and/or mags 
Uploaded here for now - belongs in GCS probably.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1310 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-17 19:02:07 +00:00
peabody124
64bcebb87a AHRS: Fixed bug in the downsampling code (used a += a + blah, dumb). Also added initialization of the magnetic flux based on fixed GPS settings (I hope you're near Houston). I will add the GPS communication shortly. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1307 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-17 05:32:07 +00:00
dschin
ae18a8e89c Added general functions for coordinate conversions 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1306 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-17 00:09:32 +00:00
dschin
4f31bfbef7 Fixes for the project files. Hopefully they don't break someone else. 
Eclipse Workspace:
- Made project in Eclipse workspace point to trunk/flight
- Re imported launch configurations from previous version

OpenOCD
- added "ft2232_device_desc "Dual RS232-HS"" back to jtag cfg files because windows didn't like it w/o it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1305 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-16 23:40:27 +00:00
peabody124
f74268b5e5 Cleanup and documentation. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1304 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-16 16:58:24 +00:00
peabody124
a23f3c66f4 Behaving reasonably, added calibration code which runs by default on startup and take 6 seconds - this will be called from GCS in future and saved to SD card. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1303 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-16 16:58:22 +00:00
peabody124
e0d63103ec Added a testing function for INS - currently doesn't stabilize for fixed inputs. Fixed two bugs I found in INSGPS (R[10] instead of R[9] initialized and Nav.Pos[2] was set to wrong X element). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1302 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-16 16:58:20 +00:00
peabody124
d2e234b53a Adding the code from Dr. Dale to the AHRS. Currently diverges though, but not on the PC. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1301 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-16 16:58:18 +00:00
peabody124
ddbd4f8c80 Simple attitude calculation based on gravity and magnetic vector 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1298 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 06:03:44 +00:00
peabody124
3f408ad655 AHRS: Changing AHRS to use a DMA double buffering scheme with continuous samping for the analog data, then a simple fixed point FIR/decimate function. Currently all the oversampling parameters are hard coded as definitions, but will be updated to be configurable via settings. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1297 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 04:09:01 +00:00
peabody124
cc2441d41b Adding ADC downsampling code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1296 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 04:08:57 +00:00
peabody124
ed70cb4794 [AHRS] Missed a setting for the ADC configuration. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1292 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 01:12:00 +00:00
stac
3125ecfc4e AHRSComms: altitude sensor data is now sent to AHRS 
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.

Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 01:02:13 +00:00
peabody124
d4c5dba234 [PIOS] The ADC mappings are strange because of the way the DMA engine works. Basically data is packed 16 bits ADC2 then 16 bits ADC1 channels, so the accels are pins [4 2 0] currently. Also there is inconsistency between the names of the pins in the config file which uses 1 based indexing and the index for PIOS_ADC_PinGet which is zero based and has to account for this interleaving. Probably should adjust config file to be zero based and then to make those pin numbers map to the function call. The actual order they appear is arbitrary as the ADC engine can scan in whatever order. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1290 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-15 00:53:30 +00:00
stac
c3e509c2cb attituderaw: Replace HeadingActual with AttitudeRaw 
AttitudeRaw now includes:
 - magnetometers XYZ (in mG)
 - gyros XYZ (raw ADC samples)
 - accelerometers XYZ (raw ADC samples)
 - placeholder for gyro temp sensors (read as zero for now)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-14 23:42:14 +00:00
stac
5d635d4233 uavobjects: regenerate existing uavobjects 
No functional change, uavobjects were not regenerated since last
change to the object generator.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1288 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-14 23:42:07 +00:00
vassilis
a075eafb98 FlightArchitecture: Updated description of Stabilization module (air/ground speed handled by guidance module) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1285 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-14 14:19:33 +00:00
vassilis
9cd76fbe46 FlightArchitecture: Added Climbrate and Airspeed fields in Position objects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1284 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-14 14:04:28 +00:00
vassilis
697b3510fb Flight: First release of module architecture and dataflow diagram (still work in progress) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1283 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-14 03:02:21 +00:00
peabody124
a084d21804 Merge branch 'watchdog' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-13 05:18:17 +00:00
cwabbott
c1cf1ec71b PiOS/Win32: Most stable version of port.c so far. Changed Makefile.win32 to use mingw32-gcc to avoid conflicts. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1278 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-12 14:32:52 +00:00
dschin
487b61473e git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1268 ebee16cc-31ac-478f-84a7-5cbb03baadba 2010-08-11 16:18:24 +00:00
cwabbott
1125311083 Fix Eclipse project files. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1252 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-09 18:24:26 +00:00
cwabbott
f041569bfe fixed a small problem in port.c, also added some debug statements. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1246 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 18:38:03 +00:00
stac
f74c6ffdd5 i2c: rewrite i2c layer 
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler.  In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.

NOTE: The I2C interrupts must be the highest priority IRQs in the
      system to ensure correct operation.

I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.

I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.

I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions.  Generation of start/restart/stop conditions
are handled automatically over the list of transactions.

Timeouts have been removed from the API for now.  May be added
back later.

This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board.  There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes.  This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine.  That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.

Failures are currently fatal and will lock up the CPU.  This allows
useful information to be obtained in the failure cases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:15:08 +00:00
stac
b6c1f43145 i2c: Change API to allow passing const config data 
Mark the I2C_InitStruct parameter as const so that we can pass
const data as the initializer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1240 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:14:58 +00:00
stac
f66e2cbd86 battery: fix doxygen header info 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1239 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:14:56 +00:00
stac
9050b9d26a ahrs_fsm: minor style fixups 
No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1238 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:14:55 +00:00
stac
a320a3e4d4 build: Turn modules back on 
The modules were disabled for some reason in r1172.
This just turns them back on for the real targets.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1237 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:14:53 +00:00
stac
d7856b3d0a gdb: Do not automatically reset target in gdb init file 
The gdb init files would previously reset the target immediately
when gdb started up.  This is sometimes an unpleasant side-effect
of running gdb.

In order to connect to the target, use the new "connect" function.
To reset the target use "mon reset".

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1236 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 04:14:52 +00:00
zedamota
a688b95eb6 Flight firmware-Start of the new bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1235 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-08 00:14:22 +00:00
dankers
297985c2a0 Move old bootloader to bootloader.old 
This should be removed at some point but can wait till we have a working bootloader.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1234 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-07 23:55:28 +00:00
cwabbott
6f553efe45 debug_printf() for PiOS.win32. There are still many issues :(. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1226 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-07 02:30:35 +00:00
peabody124
0fdfbb2ffb Deleting old USB code that I meant to delete a while ago. Also changed names of some functions to OP. Finally fixed the USB taking over PIOS telemetry. Detects the USB cable and that the configuration has been taken by the USB bus. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1217 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-05 23:43:52 +00:00
peabody124
0eac218572 Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-05 19:56:36 +00:00
pip
611aee73ad Removed I2C support from PipBee as it's not used. Added 4 LED definitions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1208 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 17:35:48 +00:00
pip
0331f05e9a Added extra LED's .. now up to 4 LED's .. (PipBee has 4 controllable LED's) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1207 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 17:32:42 +00:00
cwabbott
d910b8f756 slight changes to get PiOS.win32 to compile 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 14:21:58 +00:00
dankers
1a0f2e81e8 Foundations for PipBee modem code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1203 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-04 09:37:09 +00:00
cwabbott
c2508bbb9e PiOS for win32 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1200 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-03 19:29:14 +00:00
dankers
a3c1bbfc95 Remove no longer needed SDCard Files 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1190 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-01 14:00:09 +00:00
sambas
7f6336d324 OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-01 10:34:07 +00:00
peabody124
47da7326e7 Damn thought I'd commited this 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1176 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-29 13:50:24 +00:00
peabody124
23ed7c8435 Removing the device_desc line since it seems to advertise differenetly across platforms and openocd doesn't require it. Please revert this change if it starts block other OS but I don't think it will 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1175 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 21:29:27 +00:00
peabody124
7e6afe5a75 Updated HID code to do packet processing in OS indepdent layer. Should now work on all platforms. Please test and get back to me. Maximum object size of 62 bytes currently. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1174 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 18:55:04 +00:00
corvus
02a78f0470 moved Vassilis stabilization module as of r1153 into Stabilization/simple 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466 moved new stabilization code into experimental subdirectory 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 15:00:51 +00:00
corvus
c8486d08e4 Fixed some bugs in OpenPilot Core. 
- syntax error in pios_board_posix.c introduced with Doxygen comment blocks
- platform dependant code had been added to openpilot.c instead of pios_board.c
- redundant header inclusion (stm32... already included by PiOS)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1171 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 14:34:48 +00:00
dankers
32e6d53b23 Small comment issue that was causing build to fail 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1170 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 11:28:18 +00:00
edouard
9145a4b1a6 Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-28 07:28:21 +00:00
peabody124
6f63c10dca Removing more debugging comments 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1168 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 23:48:12 +00:00
peabody124
3144e3157c Added back checks on USB cable so falls back to serial telemetry if not plugged in 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1167 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 23:11:28 +00:00
peabody124
27bcd20882 HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 20:50:20 +00:00
peabody124
dac82b3c17 Getting closer for HID. Now a well behaved HID device. Just need to update GCS plugin for new data format and make PJRC wrappre work properly on Mac 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1165 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 19:09:55 +00:00
peabody124
27d429fe18 Got better HID report design with valid data length embedded in report 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1164 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 17:41:56 +00:00
FredericG
66e22b56ce Fix in bmp085 driver. Was not checking correctly if lock on I2C succeeded => caused an assert when used in combination with other I2C devices 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1163 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 09:52:45 +00:00
FredericG
efaa6c910b MKSerial: also report ground-speed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 09:49:47 +00:00
peabody124
eb41a84acf And this 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1161 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 08:09:43 +00:00
peabody124
7d7802593e Oops, sorry missed these files 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1160 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 08:08:50 +00:00
peabody124
fe616df48d Further tweaks. Will start trying to get reliable communication with larger report size tomorrow 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1159 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 07:56:50 +00:00
peabody124
840f7ff456 A version of the firmware that successfully Acks back and forth over HID. Still need to refine the PIOS interface and make GCS strip out the report ID data (if necessary). Also note: currently if you run too many modules the watchdog timer kicks in. I haven't determined if this is due to an interrupt binding up or what (and why it doesn't happen more often since I can't find any code that explicitly resets the WWDG). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1157 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 06:22:34 +00:00
peabody124
d89cd43cd1 Further tweaks to the HID update 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1156 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 05:28:04 +00:00
peabody124
c46dcea73a Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-27 03:19:07 +00:00
corvus
2621d07574 Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired 
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this)) 
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-26 21:26:28 +00:00
dankers
dab978cf98 DOh! should have been part of last commit. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1151 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-23 04:35:10 +00:00
dankers
1fb8fc797c Floss-JTAG file for new Revision B of Floss-JTAG (Rowan JTAG). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1150 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-23 04:34:32 +00:00
dschin
e5c19a38c5 In the the \OpenPilot\flight\Project\OpenOCD directory there were two JTAG debugging config files: 
1) floss-jtag.arhs.cfg
2) floss-jtag.openpilot.cfg
But the Eclipse project the "external tools configurations" for the OpenOCD Debug is looking for the "floss-jtag.cfg" file in the command line arguments. The added file "floss-jtag.cfg" is a simply a copy of "floss-jtag.openpilot.cfg". The .arhs.cfg doesn't play well by itself.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1129 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-17 22:43:26 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 19:53:35 +00:00
sambas
f5c24d169e flight/osd: Parse config into setupbits and parameter slots 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1115 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 15:24:29 +00:00
peabody124
99e94228a9 More doxygen updates 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 01:02:34 +00:00
peabody124
5c41f95a1e Updating OSX project file for new file locations 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1100 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-15 02:16:54 +00:00
peabody124
ebeffa4392 Linux compiler error fix 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1097 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-14 15:45:36 +00:00
peabody124
700af355d4 Moved platform dependent configurations to FreeRTOSConfig.h and set windows to run without preemption to reduce CPU usage 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1096 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-14 15:34:57 +00:00
corvus
aa53b57d55 Changed the Build directory for posix port from Build/ to Build.posix/ 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1090 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-14 10:08:03 +00:00
corvus
48db68fe3c add some self made FreeRTOS scheduler documentation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1088 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-13 18:55:26 +00:00
peabody124
53b90b9492 Updated to use sigwait as an alternative to signals for the timer. Also, added per task suspend/resume flags which should make sure things behave nicely 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1087 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-13 18:29:39 +00:00
corvus
fa57e42efa Deleted OpenPilot.posix branch. Integrated portability modifications into main tree 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1086 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-13 16:23:41 +00:00
corvus
65d0c93680 Added some comment lines for peabody124 to read ;) 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1078 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-12 17:15:00 +00:00
peabody124
68be63bc50 Conditional signaling now works on linux 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1075 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 21:42:59 +00:00
peabody124
cd5c03b809 Ugh, cross platform development. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1073 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 20:46:22 +00:00
peabody124
0bc526a142 Got the tick handler working on linux so it doesnt jump onto the wrong thread 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1072 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 20:38:20 +00:00
peabody124
4c4d1ca420 Also added sched_yield(). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1071 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 20:27:03 +00:00
peabody124
9ff624bc0f I'm an idiot. I put ifndef __darwin__ when I meant ifdef. Works on linux now with minimal CPU. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1070 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 20:23:34 +00:00
corvus
ae4a52e0ed test cases for signal handling 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1069 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 16:43:41 +00:00
corvus
71589d2246 simple segfault reproduction 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1068 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 15:11:26 +00:00
corvus
0efc69055e fix in print function *ducks* 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1067 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 13:57:20 +00:00
corvus
1dd60b54f6 thread safe printf implementation now 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1066 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 13:20:22 +00:00
FredericG
5bb4fedc7f attitude seq field was removed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1065 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 12:25:43 +00:00
corvus
ece979a4e1 ported latest changes by Vassilis and Stac to Posix version 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1064 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 12:13:43 +00:00
peabody124
c6b495cdcc This version runs stably on all three platforms for me. Corvus, please feel free to revert these changes if you want or have a better solution. Also only Mac tested with GCS, the rest just sit there running nicely 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1063 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 02:23:11 +00:00
peabody124
dd598a75a4 This version runs stably on all three platforms for me. Corvus, please feel free to revert these changes if you want or have a better solution. Also only Mac tested with GCS, the rest just sit there running nicely 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1062 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 02:22:24 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-11 01:54:43 +00:00
stac
3896baa908 usb hid: fix compiling with ALLOW_HID_TELEMETRY 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1060 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-10 14:56:27 +00:00