rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
7,754 Commits 5 Branches 8 Tags 266 MiB
9f43e1151c
Commit Graph

3409 Commits

Author SHA1 Message Date
Corvus Corax
4d06bdfc04 PiOS.posix: bugfix to POSIX pios_delay implementation 2012-06-29 15:06:50 +02:00
Corvus Corax
2540ee53dc Merge commit '80f53b185c67d475ead43df97c4a62bcc36d7d90' into gcsbitfields 2012-06-29 09:45:44 +02:00
James Cotton
cd311642dd Merge branch 'next' into revo 2012-06-28 10:35:47 +02:00
a*morale
5a1efef3fe Merge branch 'amorale/fixoutputglitchonsave' into next 2012-06-26 01:09:18 +02:00
Oleg Semyonov
727e67d7fd Even more optimize FlightMode switch position calculation 
This runs in a high frequency loop and should use as little of
floating point as possible. Thanks to Kenn for the idea.
 2012-06-25 11:41:42 +03:00
Oleg Semyonov
2c896c9e91 Do not care about FlightMode channel if only one flight mode configured 2012-06-25 01:52:06 +03:00
Oleg Semyonov
02fa6fde09 Optimize FlightMode switch position calculation 2012-06-25 00:30:42 +03:00
Stacey Sheldon
154d971d4d flash: don't call vTaskDelay() before OS init 
PIOS_Flash_Jedec_EraseChip is called during early
init when the table_magic has changed.  This call
happens on CC/CC3D prior to the OS being initialized
so it is not OK to call vTaskDelay() yet.

This was leading to boards locking up (no flashing blue
LED) immediately after jumping to the application when
the table_magic had changed or was being init'd for the
very first time.
 2012-06-24 12:23:34 -04:00
a*morale
51678f24b4 Solve a bug that causes the motor spin on the first save for ActuatorSettings. 2012-06-24 14:06:51 +02:00
Brian Webb
43786c914d Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-23 15:01:53 -07:00
a*morale
688ae814fc Modifications to prevent glitches on servo output during save for ActuatorSettings 
Refactored the updating of ChannelUpdateFreq so that it is done only when the actual update rates changes.
The actual update of the servo channel is moved inside the ActuatorTask.
Now the problem happen only in very few cases when modifying update rates.
 2012-06-23 22:55:57 +02:00
Oleg Semyonov
cd6387d0a6 Add support for more than 3-pos FlightMode switches 
It is now possible to have 1 to 6 flight mode switch positions
(usefull for guidance, position hold and similar use).

The input channel range is divided into N (1 to 6) zones and each
zone represents a flight mode. Default is 3 zones (backward compatible),
but more can be chosen.

How to use: configure Tx mixers in a way they provide required number
of different values for the same FlightMode channel. For instance,
using Turnigy 9X radio with ER9X firmware, one can create a mixer like
this:

     -100 MAX ID0   Manual
   R  -50 MAX ID1   Stabilized1 (Rate)
   R    0 MAX ID2   Stabilized2 (Attitude)
   R   50 MAX RUD   PositionHold
   R  100 MAX ELE   ReturnToBase

And set number of flight mode positions to 5. As a result, the 3-pos
switch (ID0, ID1, ID2) will provide first three flight modes, the rudder
D/R switch will override those and enable the 4th flight mode, and
elevator D/R switch will have highest precedence and activate the 5th
flight mode.

This will change the ManualControlSettings objectID.
 2012-06-23 22:10:19 +03:00
Stacey Sheldon
384305d8ee makefile: add additional context to output when building all_* targets 
When building the various all_* targets, it was hard to tell which
board/build-type that each line of output applied to.  Now, the
all_* target types will include something like:
 CC        [fw|cc  ]  flight/PiOS/STM32F10x/pios_gpio.c
which includes the necessary additional context.

This will help with identifying the context for warnings and errors
when building a group of targets.

Conflicts:

	Makefile
 2012-06-20 23:38:21 -04:00
Stacey Sheldon
f475088585 Merge remote-tracking branch 'op-public/next' into revo-next 2012-06-20 22:45:41 -04:00
Laura Sebesta
87900043a4 Typo fix. Grammarians will be extreamely glad to complement the OP team now that these errors haved disappeared. 2012-06-17 10:21:58 +03:00
Brian Webb
005ba0f8c8 Added erase pipx settings to PipX firmware (no GCS support yet). 2012-06-16 19:19:23 -07:00
a*morale
9aa088fb98 battery module: prevent the initial ramp up of the power supply to be identified as a low voltage condition 2012-06-15 19:43:47 -05:00
James Cotton
f8d196ffe8 Added support for board voltage monitor to battery module. 
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.

Conflicts:

	ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
	shared/uavobjectdefinition/systemalarms.xml
 2012-06-15 19:43:34 -05:00
Laura Sebesta
0e201818f0 Refactored variable names for more clarity. Changed some integrals, alititude control 
seem to work a little better.
 2012-06-15 18:02:24 +03:00
James Cotton
70606a46a1 Include initial gyro bias calibration into the level calibration of revo like 
it is with CC.
 2012-06-13 23:07:23 -05:00
James Cotton
9218145aa9 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-12 22:53:30 -05:00
Brian Webb
33cae7645d Fixed calculation of retries on PipX. 2012-06-12 19:48:21 -07:00
James Cotton
9c1fa2dfc6 Revert "Get mag before gyros so that when gyro chip is acting up we still see mag data." 
This reverts commit d2a3e39bbf.
 2012-06-12 13:10:24 -05:00
James Cotton
01d47d6373 Accidental semicolon led to MPU6000 always failing self test. Another bug 
masked that behavior.  I suck.
 2012-06-11 12:22:24 -05:00
James Cotton
a029fc4656 Merge branch 'next' into revo 
Conflicts:
	Makefile
 2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0 More the system task priority down and increase the timeout for erasing the 
flash so it says completed.  However, it still blocks the system for a long
time.  During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.

This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else.  This should not be permited when the system is
armed.

The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread.  It is very bad practice
for anything to block this (i.e. callbacks should never take very long).  We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
 2012-06-11 12:03:32 -05:00
James Cotton
821a25e419 For now make the F4 PIOS_ADC return an error code if there is no new data in 
the ADC buffer.  This should be handled appropriately by the caller.
 2012-06-11 09:22:04 -05:00
Stacey Sheldon
c73cffce59 Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	Makefile
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile

Fixed CRLF line end clobbering in:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/Common/pios_usb_util.c
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/PiOS/inc/pios_rfm22b_priv.h
	flight/PiOS/inc/pios_usb_util.h
 2012-06-10 19:01:11 -04:00
James Cotton
f5845cb037 Fix self test for MPU6000 so it returns negative values per our standard 2012-06-09 11:18:14 -05:00
James Cotton
d2a3e39bbf Get mag before gyros so that when gyro chip is acting up we still see mag data. 
Helpful for board diagnostics.
 2012-06-09 11:06:41 -05:00
James Cotton
ac99176f73 Add a scale to the logo 2012-06-08 14:12:52 -05:00
James Cotton
6ca34d3d0c Make lift model dependent on airspeed. 2012-06-08 13:58:18 -05:00
James Cotton
ac9adb0c94 Improve the airplane modeling a bit to the point navigation now keeps altitude 
and speed correctly
 2012-06-08 13:54:17 -05:00
James Cotton
ccee8e09f4 Cheat. For FW navigation when doing endpoint mode plot path from current 
position to endpoint.
 2012-06-08 11:44:22 -05:00
James Cotton
980111d246 Make RTH mode default to 2 m/s. This needs to be in a UAVO somewhere 
(ManualControlSettings?)
 2012-06-08 11:44:00 -05:00
James Cotton
53c9b4c8a4 Add simulated baro airspeed. PathFollower functionality tested and works. 2012-06-08 11:23:45 -05:00
James Cotton
bcaeda98f7 Fix bug in wind speed usage for simulation 2012-06-08 11:14:15 -05:00
James Cotton
6605d861dd Add cross coupling between roll and heading to make simulator fly like a plane 
:D
 2012-06-08 11:08:11 -05:00
James Cotton
493864bdc4 Add a fixed wing simulator mode 2012-06-08 10:46:40 -05:00
James Cotton
463ad550e2 A few comments in my code and some simplication to the fixedwingfollower to get 
it compiling against my path planner.
 2012-06-08 10:46:40 -05:00
James Cotton
a28aac47b5 Strip down FW navigation to be supported by my simple scheme 2012-06-08 10:46:39 -05:00
James Cotton
4c3ca17e34 Backport the fixed wing path follower 2012-06-08 10:46:39 -05:00
James Cotton
574ab3fcaa Make the VtolPathFollower an optional module 
Note that RTH mode right now checks that throttle control is enabled, but this
should only occur if the system is a VTOL.
 2012-06-08 10:46:38 -05:00
James Cotton
f5b2575c88 Merge branch 'next' into revo 
Conflicts:
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile
 2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457 Merge branch 'MikeL' into next 2012-06-07 11:31:41 -05:00
Corvus Corax
720ae43a5e Modules/GPS: Fixed NMEA parser to still update GPSPosition in case of errors, but with error flagged. 2012-06-07 11:21:00 -05:00
James Cotton
1972470dcb Manualcontrolcommand needs a bit more stack space now 2012-06-07 10:07:52 -05:00
James Cotton
c689bcfb80 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-07 09:49:18 -05:00
Sambas
50ed363330 Axislock as default for VtolPathFollower 2012-06-07 17:42:51 +03:00
Brian Webb
861bcc46fe Fixed RSSI reporting on PipX. 2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68 Further improvements in link reliability on the PipX. 2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL 
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
 2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d Improved lockups on dropped packets. 2012-06-05 21:10:32 -07:00
Brian Webb
0bc3c5061f Fixed PipX connection status reporting. 2012-06-05 19:34:19 -07:00
Brian Webb
4e68f6543e Added tracking of dropped packets to PipX and turned off visible text on signal strength meters. 2012-06-04 21:18:13 -07:00
Brian Webb
25fe50e9b1 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 15:38:57 -07:00
James Cotton
0b828fbdd0 Merge branch 'next' into revo 
Conflicts:
	Makefile
 2012-06-04 14:12:19 -05:00
James Cotton
ff0a3a156e Merge remote-tracking branch 'origin/os/AeroSimRC' into next 2012-06-04 12:25:59 -05:00
James Cotton
ed2fb5cb09 Merge branch 'next' into revo 2012-06-04 12:23:58 -05:00
James Cotton
46a52fc5ce Apply the virtual flybar stick scaling in stabilization.c because we need to 
know the true stick position to dampen the gyros appropriately.
 2012-06-04 12:22:39 -05:00
James Cotton
bda3f301cb Rename VBar mode to VirtualBar 2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1 Make the amount to suppress the gyros adjustable instead of binary 2012-06-04 12:22:39 -05:00
James Cotton
59972d5570 Limit the number of degrees the vbar can deflect. This is good for fast flips 
etc.
 2012-06-04 12:22:39 -05:00
James Cotton
42ac4018b8 Woops. Fix really nasty bug in vbar mode I introduced. Also fix small bug in 
scoping of gyro gain that made it not work.
 2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639 Add piro compensation option to the vbar mode 2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e For hardcode flipping allow full stick to completely override the gyro 
feedback.
 2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc Add friendly settings for the vbar mode including the VbarTau which acts like 
the time constant.
 2012-06-04 12:22:39 -05:00
James Cotton
ff1b1a93cf Implement a virtual flybar in a way inspired by behavior of Align 3G which 
seems apply a leaky integrator to the swash angle.  This is the similar to what
is done by Phubar (http://code.google.com/p/phubar/) as well although we refer
to the gyro term as the proportional and the flybar angle as the integral
 2012-06-04 12:22:38 -05:00
James Cotton
1b55df733d Create virtual flybar setting for stabilization modes 2012-06-04 12:22:38 -05:00
James Cotton
daaa661080 Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed. 
Conflicts:

	shared/uavobjectdefinition/hwsettings.xml
 2012-06-04 10:50:45 -05:00
Corvus Corax
78857cefaa Turned "Battery" into an optional module. It otherwise prevents flying if no voltage sensor is installed. 2012-06-04 17:31:45 +02:00
James Cotton
70a6bf539b Fix simulation implementation of pios_rcvr to match channel mappings in real 
firmware
 2012-06-04 10:30:44 -05:00
James Cotton
b11b606ddc Fix RTH mode. Now works in simulation when GCSReceiver goes invalid. 
There is a small issue that when it is in RTH failsafe mode and you regain
signal and your throttle is low you will disarm due to the timeout.  That
means you'd suddenly get it back and plumet ouf of the sky.  If you are
still holding throttle (which most people might do?) you will have control.

The timeout needs to probably start when you regain signal.
 2012-06-04 10:25:43 -05:00
James Cotton
9f93c9cbec Get PIOS_GCSRCVR working on revo 2012-06-04 09:48:05 -05:00
James Cotton
dc7fe1bdd8 Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had 
to include uavobjectmanager.h manually which was weird
 2012-06-04 09:48:05 -05:00
James Cotton
10aa31a57f When ManualControlSettings.FailsafeBehavior is set to RTH and no valid input is 
detected and the aircraft is armed enter RTH mode.
 2012-06-04 09:48:05 -05:00
James Cotton
21eb48c58c Add a RTH flight mode and remove it from the waypoint actions as that is 
redundant with flying to (0,0,0)
 2012-06-03 22:14:11 -05:00
James Cotton
9707c6152a Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-03 19:13:01 -05:00
James Cotton
71e14a691e Merge branch 'next' into revo 2012-06-03 19:00:51 -05:00
Stacey Sheldon
ec0889ea85 makefile: add additional context to output when building all_* targets 
When building the various all_* targets, it was hard to tell which
board/build-type that each line of output applied to.  Now, the
all_* target types will include something like:
 CC        [fw|cc  ]  flight/PiOS/STM32F10x/pios_gpio.c
which includes the necessary additional context.

This will help with identifying the context for warnings and errors
when building a group of targets.
 2012-06-03 18:25:23 -05:00
James Cotton
e341a37bd1 Need to add a small delay after save for the load to work correctly. Odd. 2012-06-03 17:26:10 -05:00
James Cotton
a3df27ab65 Need to call FLASH_OB_Launch after setting the BOR bits 2012-06-03 16:45:18 -05:00
Stacey Sheldon
e3393bb255 makefile: add additional context to output when building all_* targets 
When building the various all_* targets, it was hard to tell which
board/build-type that each line of output applied to.  Now, the
all_* target types will include something like:
 CC        [fw|cc  ]  flight/PiOS/STM32F10x/pios_gpio.c
which includes the necessary additional context.

This will help with identifying the context for warnings and errors
when building a group of targets.
 2012-06-03 17:43:14 -04:00
Brian Webb
36f62be3b9 Fixed packet error detection and improved RSSI reading. 2012-06-03 10:07:08 -07:00
Corvus Corax
be72d24c5f Attitude: Fixed calculation for baro offset adjustment time 2012-06-03 09:52:24 -05:00
Corvus Corax
b06b51f1b2 Revolution/Attitude: Added offset calculation for barometric altitude 2012-06-03 09:52:14 -05:00
James Cotton
96bd5ba574 Merge branch 'navigation_map' into revo 2012-06-03 09:48:28 -05:00
James Cotton
c892a28970 Fix firmware to work with new usage of the action waypoint field 2012-06-03 09:36:21 -05:00
Corvus Corax
f75134c6d5 Merge branch 'corvuscorax/fix-baroaltitude-offset' into revo-next 2012-06-03 12:31:30 +02:00
James Cotton
4ad23864c8 Treat the waypoint action as something to do once you hit that location. (e.g. 
PathToNext) and add a Stop value to indicate not to advance to the next
waypoint.  This is essentially a perament loiter to the pathfollower (I think)
but it's really just to have the ability to "delete" waypoints.
 2012-06-02 18:40:53 -05:00
Corvus Corax
88f69daf64 Merge remote branch 'origin/corvuscorax/portugal_backports' into revo-next 2012-06-02 22:44:13 +02:00
Corvus Corax
ab28686976 Merge branch 'corvuscorax/new_navigation' into revo-next 2012-06-02 22:30:44 +02:00
Sambas
e7155e279f bugfix 2012-06-02 21:19:55 +03:00
James Cotton
e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip 
configuration)
 2012-06-02 11:00:42 -05:00
James Cotton
25f85ee4fe Add an error flag to ObjectPersistence and when saving a setting make it verify 
that the data reads successfully.
 2012-06-02 10:23:27 -05:00
Sambas
06a814c8a9 Fixing most warnings from osd fw 2012-06-02 15:52:38 +03:00
Sambas
d6216cf02b Graphic features and cleanup 
osdinput module back to irq based usart
 2012-06-02 12:46:09 +03:00
Corvus Corax
2d3645cb0a ManualControl: Do not process input channels at all if theres invalid values to prevent flightmode changes due to glitch 2012-06-02 08:41:35 +02:00
Corvus Corax
fed9d98824 Merge commit '84c3705390a072d92bf69b58ae4d72a09989290e' into portugal_backports 2012-06-01 13:06:44 +02:00
Corvus Corax
c9d41e2a23 fixes to INS backported from portugal flight branch 2012-06-01 13:02:26 +02:00
Brian Webb
df8a5f8f27 Changed update period for PPM inputs on the PipX. Fixed LED code. 2012-05-31 18:56:07 -07:00
Corvus Corax
a786c6e6b9 Attitude: Fixed calculation for baro offset adjustment time 2012-05-31 18:21:20 +02:00
Corvus Corax
f7a2b95167 Revolution/Attitude: Added offset calculation for barometric altitude 2012-05-31 16:41:03 +02:00
James Cotton
ed2b9f1f63 Make PIOS_LED init it's GPIO clocks so it doesn't rely on startup code 2012-05-30 10:12:40 -05:00
James Cotton
c76c71cfce No reason to init the board a second time 2012-05-30 09:50:05 -05:00
James Cotton
7c8cc94f5e In the revo bootloader check that the BOR bits are set to 2.7 volt threshold. 
This addresses an issue where a slow power ramp (e.g. some BEC) will stop it
booting.
 2012-05-30 09:43:04 -05:00
Sambas
ed1a4dada6 Merge remote-tracking branch 'remotes/origin/sambas/osd_test_v1' into revo-next 
Conflicts:
	flight/PiOS/STM32F4xx/pios_adc.c
 2012-05-30 16:30:09 +03:00
Brian Webb
7287e2f725 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-29 18:14:20 -07:00
Corvus Corax
298b6233ed Merge branch 'revo-next' into corvuscorax/new_navigation 
Conflicts:
	flight/Libraries/paths.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Revolution/Makefile
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-30 00:51:52 +02:00
Sambas
e72e913e02 F4 cpuid fix, RM says flash size comes from same base address. who knows? 2012-05-29 22:17:31 +03:00
Sambas
7f1e392e83 some graphic fixes and ntsc defines 2012-05-29 17:55:30 +03:00
Oleg Semyonov
b93674cf64 uavtalk: fix object access mode comments to be correct 2012-05-29 11:57:31 +03:00
Brian Webb
9a6fb60dd6 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-28 20:18:59 -07:00
James Cotton
a89b880609 Fix compilation error on CopterControl because it doesn't support some of the 
path functionality.  These configurations that could result in
updatePathDesired or altitudeHoldDesired being called should result in an error
on startup to block arming.
 2012-05-28 20:33:49 -05:00
James Cotton
564c442ac8 Remove some code from Zippe that used a timer to trigger the ADC. We might do 
this again in the future but we need to generalize the configuration.  For now
the ADC is fairly simple requirements on revo for battery monitoring.
 2012-05-28 20:28:48 -05:00
James Cotton
88cf100430 Merge remote-tracking branch 'revo/amorale/revo' into revo 2012-05-28 20:27:51 -05:00
a*morale
d071491265 removed include for positiondesired.h 2012-05-29 00:56:39 +02:00
a*morale
468e8732f5 Fix for FlightBattertData ConsumedEnergy calculation 2012-05-29 00:55:03 +02:00
James Cotton
1934752d50 Merge branch 'revo-next' into revo 2012-05-28 15:23:14 -05:00
Corvus Corax
1ad2b19d28 PathPlanner: fixed a few failsafes, changed waypointID to int16 - negative jump ids have special meaning 2012-05-28 20:50:09 +02:00
Oleg Semyonov
5739dfbfc8 Merge remote-tracking branch 'origin/next' into os/aerosimrc 
Conflicts:
	shared/uavobjectdefinition/gcsreceiver.xml
 2012-05-28 21:46:43 +03:00
Oleg Semyonov
910b465ac6 AeroSimRC: do not update sensor and/or attitude data if read-only flag is set 2012-05-28 19:44:34 +03:00
James Cotton
4360d8adfd Merge branch 'next' into revo-next 2012-05-28 11:25:40 -05:00
Sambas
147100bc2f Merge remote-tracking branch 'remotes/origin/revo-next' into osd_test_v1 
Conflicts:
	Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-05-28 19:06:25 +03:00
James Cotton
8a6073fbaf Merge remote-tracking branch 'revo/revo-next' into testing 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/Revolution/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-28 09:13:26 -05:00
Corvus Corax
51a4e82642 bugfix to path library 2012-05-28 14:48:08 +02:00
Corvus Corax
089aa54a59 FixedWingpathFollower: Added debug output of error indicators 2012-05-28 14:46:03 +02:00
Corvus Corax
32fdfe5aa5 fixed UAVObj include list for revolution to allow new style pathfollowers 2012-05-28 13:40:12 +02:00
Corvus Corax
d50108ff53 Merge branch 'revo-next' into corvuscorax/new_navigation 2012-05-28 13:27:51 +02:00
Corvus Corax
978ab5b96c Merge remote branch 'origin/stac/etasv3' into revo-next 2012-05-28 12:56:27 +02:00
Oleg Semyonov
f95d29a3b8 TxPID: add GyroTau to the list of parameters (OP-637) 2012-05-28 12:48:55 +03:00
Stacey Sheldon
5c114aedd5 pipx: apply fixes that allow pipx to build with new gcc 2012-05-27 21:38:33 -04:00
Stacey Sheldon
decd92f21d pipx bu: apply recent LED changes so BU image builds again 2012-05-27 21:37:59 -04:00
Stacey Sheldon
c719d5b6cf f4 adc: allow PIOS ADC to be properly excluded from the build 
This was preventing the BL image from building
 2012-05-27 21:36:56 -04:00
Stacey Sheldon
261e65a6f2 revo bu: apply recent LED changes to revo so BU builds again 2012-05-27 21:35:52 -04:00
Stacey Sheldon
8d47dc1fe4 revo usb: apply recent hid+vcp decscriptor changes to revo 2012-05-27 21:35:13 -04:00
Stacey Sheldon
33e7e775c7 Merge remote-tracking branch 'op-public/next' into revo-next 2012-05-27 20:39:58 -04:00
Corvus Corax
e6f4a40d3e path library: updated API and usage from pathfollowers, added new conditions and additional user feedback in pathstatus 2012-05-28 01:51:17 +02:00
Corvus Corax
634a190d4f FixedWingPathFollower: Redesigned and tested FixedWingpathFollower 2012-05-27 20:49:07 +02:00
Corvus Corax
ef8d7275a8 PathFollower and PathPlanner: fixes for fixed wing 2012-05-27 02:38:56 +02:00
Corvus Corax
922b3b7f1e Merge branch 'basenext' into corvuscorax/new_navigation 
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-05-27 01:41:51 +02:00
James Cotton
1b53a9c4e6 Merge branch 'revo_battery' into testing 2012-05-26 17:06:27 -05:00
James Cotton
bd8125e41e Catch from Corvus that the path error was being squared. However need to make 
sure to take care of sign by removing one of those multiplcations.
 2012-05-26 15:24:50 -05:00
Sambas
599e1b633f graphic bugfixes 2012-05-26 21:56:54 +03:00
Sambas
36ea394d84 More graphic fixes 
setting to change screens
 2012-05-26 18:39:42 +03:00
Sambas
dfcba097f2 Cleanup and graphical bugfixes 2012-05-26 18:00:36 +03:00
Corvus Corax
9dfd34dd19 PathPlanner: added functions to allow circular paths and implement that feature in FixedWingPathFollower 2012-05-26 15:55:52 +02:00
Sambas
7eefe83335 Cleanup and fix 2012-05-26 13:38:01 +03:00
Sambas
bb40eca695 Big font fix 
IRQs back to normal
 2012-05-26 12:14:10 +03:00
James Cotton
5a6e02a688 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next 2012-05-25 20:37:23 -05:00
Sambas
a9cfc4a0af *float sprintf 
*h/v deadbands
 2012-05-25 21:12:03 +03:00
Brian Webb
b824c87056 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01 Tuning configutation of PipX. 2012-05-24 18:08:29 -07:00
Brian Webb
f48bb90cf6 Updated PipX bootloader USB configuration to match CC. 2012-05-24 18:06:19 -07:00
Brian Webb
a434688b42 Zero out watchdog register on init. 2012-05-24 18:04:42 -07:00
Corvus Corax
79b717b4f7 Fixes to PathFollowers 2012-05-24 23:28:13 +02:00
Sambas
a3b9451bcd Merged some stuff to make original hardware work better 2012-05-24 20:14:15 +03:00
Corvus Corax
435b494b0c Merge remote branch 'origin/stac/etasv3' into corvuscorax/new_navigation 
Conflicts:
	flight/Revolution/Makefile
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-24 18:55:20 +02:00
Corvus Corax
4aa1391dce updated SimPosix to test pathplanner and pathfollower functionality 2012-05-24 18:43:25 +02:00
Corvus Corax
1ecce5e23b Merge branch 'basenext' into corvuscorax/new_navigation 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
 2012-05-24 18:38:53 +02:00
Corvus Corax
9bdfe68bf5 PathFollower: refactoring (especially fixed wing) 2012-05-24 18:19:52 +02:00
James Cotton
faf3532ad3 Closer on the fonts. Looks great! 2012-05-24 18:25:51 +03:00
James Cotton
b3150500d5 Change the buffers to byte buffers and update most of the drawing code to use 
it accordingly.  Large fonts broken.
 2012-05-24 18:25:09 +03:00
James Cotton
fef6567cff Clock the SPI device with bytes. Image is now totally stable. 2012-05-24 18:23:05 +03:00
James Cotton
9d6dfee6cc Use memset to clear screen. 2012-05-24 18:20:24 +03:00
James Cotton
8411b9cc98 Remove the disable IRQ commands in PIOS_COM since they aren't needed. 2012-05-24 18:04:49 +03:00
Corvus Corax
3a2ae24284 Refactored Guidance to FixedWingPathFollower 2012-05-24 11:13:21 +02:00
Corvus Corax
63cd7b063f Refactored Guidance to apropriate pathfollower in uavobjects 2012-05-24 11:09:53 +02:00
Corvus Corax
25e21fde73 Renamed Guidanceto FixedWingPathFollower 2012-05-24 10:56:41 +02:00
Stacey Sheldon
ac75dd7be1 Revert "bu: remove LED support from bootloader updaters" 
This reverts commit 7f03a77492.
 2012-05-23 00:46:19 -04:00
Stacey Sheldon
400e529703 bu: add back LED feedback 
LED support was dropped from the BU images due to a lack
of proper abstraction for LED definitions between CC and
CC3D HW variants in the CopterControl board family.

Use the new LED abstraction to hide board revision details
from the BU image so it can once again flash some LEDs.
 2012-05-23 00:31:08 -04:00
Stacey Sheldon
56dddee56c cc: use defines for board revisions instead of hard-coded numbers 2012-05-23 00:29:12 -04:00
Stacey Sheldon
d2615cac96 hw_defs: hide board-rev differences in LED definitions 
Every board has at least one LED (HEARTBEAT).  Not all
users of LEDs need to be directly aware of which LED
configuration to choose when there may be more than one
possible configuration.

Hide the details of the differences between LEDs used in the
different HW revs for CC.  This will allow generic code to
run on CC and CC3D without being exposed to the details of
the different pins used for the LEDs.
 2012-05-23 00:22:11 -04:00
Stacey Sheldon
b97aba834a cc3d leds: move pin remapping into led definition 
The LED driver supports GPIO remapping.  No need to
do the remapping outside of the LED definition.
 2012-05-23 00:12:51 -04:00
Stacey Sheldon
dff43d5156 board_info: add guard for multiple includes of .h file 2012-05-22 21:50:53 -04:00
Corvus Corax
64c1ac3bd6 Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs 2012-05-22 22:19:31 +02:00
Corvus Corax
7f334a9773 SimPosix: make use of compile time uavobjecto initialization function generation 2012-05-22 22:06:26 +02:00
Corvus Corax
31da29a24b Reenabled full UAVObject initialization for SimPosix 2012-05-22 21:22:59 +02:00
Corvus Corax
3e5741abea SimPosix: Remove unneeded modules from Makefile to allow test run 2012-05-22 18:45:23 +02:00
Corvus Corax
9aca773714 SimPosix: Reenabled File IO for UAVObject saving 2012-05-22 18:32:52 +02:00
Corvus Corax
0d23e78762 PiOS.posix: added missing header definition to use FreeRTOS tasks in udp driver if applicable 2012-05-22 18:32:47 +02:00
Corvus Corax
e16a42b672 SimPosix: Fixed Module Initialisation, added missing UAVObject Initialisations (cause segfaults if not initialised) 2012-05-22 18:32:41 +02:00
Corvus Corax
5727d5714e Created new "SimPosix" board and ported PiOS.posix to revolution API and more "standard like" configuration akin to other "boards" 2012-05-22 18:32:27 +02:00
Corvus Corax
414310fcba test add of SimPosix architecture - doesnt work yet 2012-05-22 18:28:42 +02:00
Brian Webb
8b98d48fc4 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-22 06:27:45 -07:00
Corvus Corax
48fcf12ef9 ManualControl: fixed new PathPlanner interface to compile on CopterControl stub 2012-05-22 13:29:42 +02:00
Corvus Corax
ea7d9b6610 Merge branch 'basenext' into corvuscorax/new_navigation 2012-05-22 13:11:04 +02:00
Stacey Sheldon
3b0508e753 bu: check compatibility btw BL and HW before installing 
CC and CC3D boards share the same FW image.  This is accomplished
by checking the BOARD_REVISION field in the board_info_blob
that is stored in the BL partition in flash as we init the FW.

Make sure that the BU image only writes a BL image that has
the same BOARD_TYPE and BOARD_REVISION fields in the embedded
image as the ones currently in flash on the board.

This ensures that we never write a CC3D BL image onto a CC board
and vice versa.  This check should prevent "bricking" a board.
 2012-05-22 00:33:40 -04:00
Stacey Sheldon
e063bb0490 bl: use new USB "cable connected" API to halt in BL 
BL only cares about the physical cable being connected.
Use the newly provided API that matches this intent.
 2012-05-22 00:24:16 -04:00
Stacey Sheldon
dab400c80d usb: decouple "available" from "cable connected" 
The bootloader needs to understand whether the USB cable
is connected.  The HID and CDC drivers need to know if
the cable is connected _and_ the device has been enumerated
already.  Separate these two concepts in the API.

Combining these was resulting in the BL not properly
detecting that the cable was plugged in, and trying to boot
the firmware image immediately.  This effectively bricked
the board if you ever had an invalid firmware image.

It also happens to be the case that the BU images automatically
invalidate themselves after updating the BL so they don't run
again.  The cable detect bug + this intended behaviour of the
BU image resulted in a bricked board after upgrading the BL.
 2012-05-22 00:21:24 -04:00
Brian Webb
6e359c5933 Added PipX to Windows .inf file and updated ppm port definitions. 2012-05-21 19:22:46 -07:00
Corvus Corax
68fe938016 Implemented new programmable PathPlanner 2012-05-21 21:42:28 +02:00
Corvus Corax
992e189bcd added PathAction (again) 2012-05-21 12:10:01 +02:00
Corvus Corax
09f25ab11b Refactorted VTOLPathFollower to fit into new scheme: optional module, reports status and knows advanced FlightModes 2012-05-21 12:10:01 +02:00
Corvus Corax
84a0fd731f Added ReturnToBase flightmode and correct behaviour in ManualControl 2012-05-21 12:10:01 +02:00
Corvus Corax
6a6eace700 Added forced disarming via systemalarm 2012-05-21 12:10:01 +02:00
Corvus Corax
9dd94f98b6 New UAVObjects for programmable PathPlanner 2012-05-21 12:10:00 +02:00
Corvus Corax
73ccdd0e69 Merge remote branch 'baseorigin/next' into james/testing4 2012-05-21 11:57:02 +02:00
Brian Webb
e57543ec29 Updated USB on PipX to latest CDC changes. 2012-05-20 19:34:43 -07:00
Brian Webb
6cb13aa2ba Fixed failed merge with next. 2012-05-20 18:36:08 -07:00
Brian Webb
2f1a9e3e7d Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout. 2012-05-20 18:30:37 -07:00
Stacey Sheldon
d7d670036b usb: make sure USB device is off limits until it has been init'ed 
USB device was being accessed prior to being initialized.
This resulted in a hard-fault or NMI when using any endpoint
beyond 0 or 1 which are init'ed by the BL.  This broke VCP which
is on endpoint 2 (control) and 3 (data).

This bug was introduced in 5ad37e69 which stopped checking the
transfer_possible variable.
 2012-05-20 13:28:16 -04:00
Stacey Sheldon
7e6a222a8e usb serial: refactor serial number construction 
Use new PIOS_USB_UTIL_AsciiToUtf8() function to compose the
USB serial number rather than repeating that code for each
board.

All boards now append "+FW" or "+BL" to their USB serial numbers
to allow the descriptors to differ between FW and BL images.
 2012-05-19 16:15:47 -04:00
Stacey Sheldon
698ea8e86e usb util: Add common utility functions for USB descriptors 
Make a home for generic functions related to USB.
 2012-05-19 16:14:10 -04:00
Stacey Sheldon
3e0a9bc47e usb: Change supported LANGID in USB descriptor to be English US 
Some versions of Windows will ignore the USB device serial number
if the string is not delivered with LANGID = English US 0x0409.

This is true regardless of the configured locale of the machine.
 2012-05-19 16:12:34 -04:00
Stacey Sheldon
19367730c0 usb: remove null termination on serial number string 
The serial number string descriptor was incorrectly null
terminated.  The standard clearly states that there should
not be a null terminator.

Use new #defines to ensure that our strings are sized
properly.
 2012-05-19 16:06:49 -04:00
Stacey Sheldon
b905607dc7 serial: use defines for serial number lengths 
Use #defined sizes for returned serial number lengths instead
of hard-coded values.
 2012-05-19 16:06:48 -04:00
Stacey Sheldon
ba8d60301c usb: remove run-time selectable device descriptors 
BL images now always use hid-only.

FW images can use hid-only or hid+vcp but this is selected
ONLY at compile time based on whether PIOS_INCLUDE_USB_CDC
is defined.

CC uses HID+VCP by default now.
 2012-05-19 16:06:48 -04:00
Stacey Sheldon
d4b0475f6a usb-descriptors: add +BL or +FW suffix to serial number string 
This makes the BL and FW images distinct devices with unique
serial numbers.

Windows (and maybe Mac) remembers the device descriptors and
the associated drivers based on this serial number.  Providing
unique serial numbers for the BL and FW images allows us to
provide different sets of descriptors for the BL and FW images
without confusing these OSes.

BL version number is now also bumped to reflect the new
serial number generation algorithm.
 2012-05-19 16:06:44 -04:00
Stacey Sheldon
461d4a2ddd hid+vcp: Add Windows INF file for CDC on OpenPilot boards 2012-05-19 16:06:43 -04:00
Stacey Sheldon
48cb20dc81 hid+vcp: change default USB descriptor to HID+VCP 
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.

VCP is known to not work on WinXP without service pack 3.
 2012-05-19 16:06:30 -04:00
zedamota
eb83afdcf1 Working compliant VCP+HID descriptors for Windows. 2012-05-19 15:40:46 -04:00
Brian Webb
6a7179120d Fixed setting of PipX description, and changed gcs receiver object to be update on change on flight side so that it works on the PipX. 2012-05-19 09:25:11 -07:00
Brian Webb
00a83f3984 Reverted change to link_STM32103CB_PIPXTREME_memory.ld 2012-05-18 19:08:44 -07:00
Brian Webb
c25884bcaf Cleanup on the PipX branch. 2012-05-18 17:42:25 -07:00
Brian Webb
68d66d4181 Fixed firmware description in PipX status. 2012-05-17 20:35:17 -07:00
Brian Webb
6fbc3339d5 Fixed processing of UAVTalk packets when in transparent com mode. 2012-05-17 18:37:45 -07:00
Brian Webb
44a1663eb9 Fixed transparent comm on PipX. 2012-05-16 19:02:53 -07:00
Brian Webb
7082eda175 Fixed returning status for currently paired modem. 2012-05-15 20:11:52 -07:00
Brian Webb
93ec7c11a6 Fixed race condition on getting packets. 2012-05-15 19:38:14 -07:00
Corvus Corax
badf509d1d UAVObjects: switched around order of update modes to give each bit semantic meaning - important to allow usage of a bitfield type later 2012-05-15 18:21:27 +02:00
James Cotton
af8d65616e Comment out some unused variables in the PIOS_ADC structure for now since they 
were consuming lots of memory.  Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
 2012-05-15 03:48:32 -05:00
James Cotton
bbb14f5f14 Trying to get F4 PIOS_ADC working. Changed from previous implementation timed 
by another timer to running continuously.  May go back to the previous since no
need to get tons of data.
 2012-05-15 03:19:44 -05:00
James Cotton
39ce3cea17 Clean up the battery module 2012-05-15 03:08:18 -05:00
James Cotton
0a7f5fd5d3 Enable battery code again 2012-05-15 00:38:11 -05:00
Brian Webb
bb491b8a3f Fixed bootloader on PipX. 2012-05-14 06:57:16 -07:00
Brian Webb
31069d8858 Small mod to flash saving. 2012-05-13 20:20:17 -07:00
Brian Webb
563b454693 Fixed compiling of PipX bootloader. 2012-05-13 20:19:04 -07:00
Brian Webb
a3269aaf2f Reverted some file permission changes. 2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f Fixed some bugs with setting PairIDs in GCS. 2012-05-13 14:24:00 -07:00
Brian Webb
dd03b0b159 Added reporting of stats from the remote modem. 2012-05-13 09:34:21 -07:00
Brian Webb
ec67742ff6 Added configuration of COM ports on PipX. 2012-05-12 13:16:36 -07:00
James Cotton
46fc5fa4fb Create a PathPlannerSettings object and move the PathMode setting to there. 
Also add a (temporary) field to allow storing some custom paths to select on
the fly.  Later will be replaced with some code to fetch from the flash chip.
 2012-05-12 13:12:57 -05:00
James Cotton
836e34a483 Change revo sensors to update at 500 Hz and make sure in all cases it waits for 
the relevant queue to provide data.  Also disable the quaternion stabilization
flag.
 2012-05-12 13:12:56 -05:00
James Cotton
65065f2588 Fix the ADC code on the BL for revolution 2012-05-12 13:12:56 -05:00
James Cotton
c660dd17f0 Correct comment in CC settings for MPU6000 and disable I2C support 2012-05-12 13:12:55 -05:00
James Cotton
848f1b0e29 For some reason the gyro needs 300 ms after reset in order to work after the 
bootloader jumps to code.  Nothing in datasheet to imply what.
 2012-05-12 13:00:51 -05:00
James Cotton
2ca3cde83f Improve EKF initialization. For some reason we must read an extra mag sample 
when power up value of attitude algorithm is EKF.  I don't understand why the
first mag value is bad.
 2012-05-12 13:00:51 -05:00
James Cotton
98655aacc8 Fix initialization of the complimentary filter where it didn't get the right 
initial dT
 2012-05-12 13:00:50 -05:00
zedamota
817ce9327f flight - fix pipxtreme bootloader compile 2012-05-12 12:57:15 +01:00
Brian Webb
1f5dbcf57c Mostly complete PipX configuration GUI. 2012-05-11 17:51:18 -07:00
James Cotton
406b5a00f5 Make OSX simulator more efficient 2012-05-08 03:12:35 -05:00
James Cotton
4ec4edd15c When enabling position hold altitude mode take the throttle from before as the 
"hover" throttle
 2012-05-08 03:12:14 -05:00
James Cotton
2857b58f8e Migrate path planner from position desired to path desired 2012-05-08 03:04:44 -05:00
James Cotton
37bb2cfb77 Finish getting rid of PositionDesired in favor of PathDesired and add the 
ability to move the magic waypoint with the transmitter
 2012-05-08 02:42:58 -05:00
James Cotton
a8bdd4a44a Coalescene PositionDesired and PathDesired into PathDesired and add a mode 
field to indicate how it should be interpreted.
 2012-05-08 02:29:58 -05:00
James Cotton
27d1c4be93 Extend list of airframe types for VTOL guidance 2012-05-08 02:29:58 -05:00
James Cotton
c723ae3720 Reduce the CPU usage of OSX simuluator 2012-05-08 02:29:58 -05:00
James Cotton
cbedb5b53b Move Guidance to VtolPathFollower to make room for FWPathFollower 2012-05-08 02:29:50 -05:00
James Cotton
0f2c41ac5d Merge branch 'revolution' into navigation 
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2012-05-07 21:53:10 -05:00
James Cotton
6aa7142f5e When guidance finds an incorrect airframe, delay 100ms to avoid hammering the 
alarms
 2012-05-07 12:55:35 -05:00
Sambas
dedbbec8f0 Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board. 
USB interrupt fix.
Heap warning critical sizes backwards.
 2012-05-07 12:51:07 -05:00
Oleg Semyonov
a3906aa7ea Merge remote-tracking branch 'origin/hhrhhr/AeroSimRC_plugin' into os/aerosimrc 2012-05-07 16:09:35 +03:00
James Cotton
d8c288f223 Disable LEDs on the bootloader update as without knowing the particular 
hardware revision it cannot know which pios_led_cfg_ structure to use.
Possibly this should be abstracted further into board_hw_defs to create
functions like board_init_led.

Also the BU should probably compare the hw_revision of the original and new
bootloader to make sure the user doesn't break their board.
 2012-05-07 01:59:38 -05:00
James Cotton
a40a0b0e31 Small fix to be able to build CC for Revo branch and to include revo in 
package.
 2012-05-07 01:55:52 -05:00
Brian Webb
454144f46c Pairing and saving settings working. 2012-05-06 20:47:21 -07:00
Brian Webb
352471857f Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread. 2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b Fixed failed merge with next. 2012-05-06 12:38:13 -07:00
Brian Webb
3cf4fe6512 Reverted some USB changes. 2012-05-05 10:10:40 -07:00
Brian Webb
480371a43e Resolving merge with origin/next 2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463 Merged latest origin/next. 2012-05-05 09:40:44 -07:00
James Cotton
6c0dc80978 Shuffle more stack sizes around 2012-05-05 11:33:47 -05:00
Werner Backes
22df8310c4 Fixed typo in comment 2012-05-05 11:10:53 -05:00
Werner Backes
f52f5b3d83 Don't process RMC sentences that are flaged as 'void' 2012-05-05 11:10:45 -05:00
Werner Backes
6b463e5c9e Check GGA NMEA sentence for no/invalid fix flag 2012-05-05 11:10:38 -05:00
Werner Backes
217860c187 Check for empty fields during lat/lon conversion (invalid GPS fix) 2012-05-05 11:10:32 -05:00
James Cotton
513c36f19a Update the F4 ADC to compile again. Still not fully compliant with API but 
then again API is not great and unused currently so no rush.
 2012-05-04 21:37:46 -05:00
James Cotton
3ef01569b8 Merge remote-tracking branch 'origin/kenz/PT_UI_fixes' into next 
Conflicts:
	flight/OpenPilot/System/openpilot.c
	shared/uavobjectdefinition/positionactual.xml
	shared/uavobjectdefinition/positiondesired.xml
	shared/uavobjectdefinition/velocityactual.xml
	shared/uavobjectdefinition/velocitydesired.xml
 2012-05-04 13:21:23 -05:00
James Cotton
a9b8e74b0d Disable LEDs on the bootloader update as without knowing the particular 
hardware revision it cannot know which pios_led_cfg_ structure to use.
Possibly this should be abstracted further into board_hw_defs to create
functions like board_init_led.

Also the BU should probably compare the hw_revision of the original and new
bootloader to make sure the user doesn't break their board.
 2012-05-04 08:53:14 -05:00
James Cotton
d93bf5d2a2 Clean up the XCode project 2012-05-03 22:20:00 -05:00
Brian Webb
44d95003f3 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-03 17:56:08 -07:00
James Cotton
3155324384 Merge branch 'next' into cc3d 
Conflicts:
	Makefile
	ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
	shared/uavobjectdefinition/ahrscalibration.xml
	shared/uavobjectdefinition/ahrssettings.xml
	shared/uavobjectdefinition/attituderaw.xml
 2012-05-03 16:31:49 -05:00
James Cotton
07a5d98020 Merge remote-tracking branch 'origin/Brian-Metadata-Mods' into next 2012-05-03 08:50:24 -05:00
Brian Webb
249ededcfd Added responding to OBJ_REQ and sending ACK/NACK on PipX. 2012-05-02 20:51:29 -07:00
Brian Webb
22f48ce8b0 Exposed the Send ACK/NACK function in UAVTalk. 2012-05-02 20:42:37 -07:00
Brian Webb
30d63b5b12 Merged USB CDC updates. 2012-05-02 06:45:24 -07:00
Brian Webb
8da4b9c745 Merge remote-tracking branch 'origin/stac/pt-win-vcp-fix' into Brian-PipXtreme-V2 2012-05-02 06:42:30 -07:00
Brian Webb
290acf0398 Fixed watchdog timeouts. 2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37 Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling. 2012-05-01 19:14:58 -07:00
James Cotton
3f63051df8 PiOS ADC: This could still use a lot of cleanup and needs to be implemented in 
the non-FreeRTOS case but now the ADC device is allocated dynamically which
means CC3D won't waste heap on it.
 2012-05-01 11:11:31 -05:00
James Cotton
311cbe37d2 Reenable PIOS_ADC for coptercontrol 2012-05-01 00:30:41 -05:00
Brian Webb
84a19ebeab Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-04-28 19:30:35 -07:00
Brian Webb
25ffb99cee Added initialization of flash eeprom for saving settings to PipX. 2012-04-28 19:29:56 -07:00
Brian Webb
1048eb7e2c Added pios_eeprom for saving settings. 2012-04-28 19:29:25 -07:00
James Cotton
fb53d5621a Change the magKp term (hardcoded still) for revo complimentary filter so it 
tracks magnetic north when homelocation is set.
 2012-04-22 19:01:41 -05:00
James Cotton
2890fcdc9f When in complimentary filter mode use GPSVelocity so event system doesn't have 
warning.
 2012-04-22 19:01:18 -05:00
Corvus Corax
b97b0617aa bugfix, use correct variance parameter on z velocity 2012-04-22 18:43:17 -05:00
James Cotton
f06439ecf5 Fix a bug in calculating air temperature in baro sensor when it goes below 20 
deg C.
 2012-04-22 18:43:07 -05:00
Stacey Sheldon
63285ea451 bu: remove LED support from bootloader updaters 
Bootloader updaters were all broken due to recent
changes in LED configuration handling.  Removing
LED support from the BU loads allows them to build
again, but they provide no feedback about when they're
finished writing flash.
 2012-04-22 18:42:58 -05:00
Stacey Sheldon
2ec197298b gpio: stop enabling pull-ups on all GPIOs in bootloader 
The bootloader has been enabling pull-ups on all GPIO
pins during early init.  These pull-ups are disabled
immediately before jumping to the firmware.  This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
 2012-04-22 18:42:53 -05:00
Stacey Sheldon
14cc9ef57c ppm: adjust min frame pulse width for 8ch x 18ms frames 
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.

With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels.  Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.

Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
 2012-04-22 18:42:45 -05:00
Brian Webb
aab47d6ed4 Final updates to throttled mode and further memeory reduction in the object manager and event dispatcher to reflect smaller data sizes in metadata. 2012-04-22 14:56:26 -07:00
Brian Webb
ed1937958e Changed PipX UAVTalkProcessInputStream calls to UAVTalkProcessInputStreamQuiet. 2012-04-22 08:45:01 -07:00
Brian Webb
fb6dedad2b Added UAVTalkProcessInputStreamQuiet function, which is a version of UAVTalkProcessInputStream that only processes (does not sens or receive). 2012-04-22 08:43:51 -07:00
Brian Webb
f726cc6a9d Added a RTC supervisor timer to RFM22B driver. 2012-04-21 18:31:49 -07:00
Brian Webb
5a2a3ad49b Fixed changes to UAVTalkProcessInputStream. 2012-04-21 16:54:35 -07:00
Brian Webb
eb6f175af4 Fixed metadata settings in object browswer, and removed update mode never from all uavobjects that used it (changed to manual). 2012-04-21 11:59:14 -07:00
Laura Sebesta
6feb198437 Improved comment message, aimed at beginners. 2012-04-20 17:10:16 -04:00
Stacey Sheldon
b255e7caaa hid+vcp: Add Windows INF file for CDC on OpenPilot boards 2012-04-20 09:02:40 -04:00
Stacey Sheldon
41d4ba4b1a hid+vcp: change default USB descriptor to HID+VCP 
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.

VCP will is known to not work on WinXP without service pack 3.
 2012-04-20 08:39:04 -04:00
zedamota
4968df183a Working compliant VCP+HID descriptors for Windows. 2012-04-20 08:38:24 -04:00
Brian Webb
19166cc830 Added UPDATEMODE_THROTTLED to UAVObjects update modes. 2012-04-18 18:47:13 -07:00
Corvus Corax
1c3dc9c9e1 Airspeed: fixed calculation math - no more zero zone 2012-04-18 14:41:41 +02:00
Corvus Corax
d125abf335 Baro calibration 2012-04-18 10:48:31 +02:00
Brian Webb
62c5036220 Added PipXStatus and PipXSetting UAVobjects and some initial support for them. 2012-04-17 17:36:05 -07:00
Corvus Corax
3da88601a1 Airspeed module works, needs conversion 2012-04-17 20:32:56 +02:00
Corvus Corax
317cff10dd debug code added - revert this when no longer needed 2012-04-17 18:59:46 +02:00
Corvus Corax
edf26d15e6 Airspeed: some more fixes 2012-04-17 16:38:53 +02:00
Corvus Corax
c5a6ed7486 add missing headers and makefile entries 2012-04-17 16:25:39 +02:00
Corvus Corax
cf3f0b4226 Merge branch 'james/revolution' into stac/etasv3 2012-04-17 15:57:37 +02:00
Corvus Corax
5159d2029b new airspeed module - still needs matching PIOS driver from stac 2012-04-17 15:54:05 +02:00
Stacey Sheldon
ad75e354eb etasv3: Add etasv3 driver to revolution 2012-04-17 09:39:47 -04:00
Stacey Sheldon
6a37e433b6 etasv3: Add driver for Eagle Tree Airspeed Sensor v3 2012-04-17 09:39:00 -04:00
Stacey Sheldon
853600a2ef i2c: enable flexiport i2c on revolution 2012-04-17 09:38:27 -04:00
Brian Webb
78c7416bda Added returning of UAVTalk state from UAVTalkProcessInputStream 2012-04-16 20:21:00 -07:00
Stacey Sheldon
7f03a77492 bu: remove LED support from bootloader updaters 
Bootloader updaters were all broken due to recent
changes in LED configuration handling.  Removing
LED support from the BU loads allows them to build
again, but they provide no feedback about when they're
finished writing flash.
 2012-04-16 15:09:10 -04:00
Stacey Sheldon
62fb009acd gpio: stop enabling pull-ups on all GPIOs in bootloader 
The bootloader has been enabling pull-ups on all GPIO
pins during early init.  These pull-ups are disabled
immediately before jumping to the firmware.  This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
 2012-04-16 14:41:25 -04:00
Stacey Sheldon
5ca4ec7934 ppm: adjust min frame pulse width for 8ch x 18ms frames 
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.

With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels.  Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.

Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
 2012-04-16 14:33:28 -04:00
James Cotton
ad074aee4b Fix nasty bug in guidance where I missed some breaks 2012-04-16 08:59:25 -05:00
James Cotton
a7ba6d96c1 Allow guidance to run purely off raw GPS data 2012-04-15 16:23:34 -05:00
James Cotton
050c756d54 Merge branch 'revolution_path' into testing 2012-04-15 12:34:31 -05:00
James Cotton
4928cbba44 Merge branch 'sim' into testing 2012-04-15 12:34:27 -05:00
James Cotton
59da9deffb Merge remote-tracking branch 'revo/D-Lite/ubx-parser' into sim 2012-04-15 12:33:54 -05:00
James Cotton
6a094ac326 Increase stack for the path planner 2012-04-15 12:31:50 -05:00
Corvus Corax
88f7567247 change to GPS: do not update UAVObject more than 1ce per cycle 2012-04-15 19:17:03 +02:00
James Cotton
85852df00b Make simulation produce data asynchronously for testing and add random accel 
bias
 2012-04-15 11:51:42 -05:00
James Cotton
08fd08deb8 Fix some compiler warnings in guidance code 2012-04-15 11:51:26 -05:00
James Cotton
1559eeb2e1 Use GPSVelocity updates when they are available instead of timing based on 
GPSPosition
 2012-04-15 11:50:56 -05:00
James Cotton
6e215bd029 Updating INS Pos/Vel variance includes the vertical velocity 2012-04-15 11:50:11 -05:00
James Cotton
b71e9fc9dc Create simulated OveroSync module which simply drops updates to log file 2012-04-14 22:01:33 -05:00
unknown
0b7538c3fe Constants changed to float for better portability. 2012-04-15 01:28:31 +02:00
James Cotton
9a2e0b071c Revert "Allow simulated quadcopter to include GyroBias in the artificial sensor data." 
This reverts commit 212a10bcd4.
 2012-04-14 17:20:01 -05:00
James Cotton
212a10bcd4 Allow simulated quadcopter to include GyroBias in the artificial sensor data. 2012-04-14 14:52:56 -05:00
James Cotton
af02eb6517 Merge branch 'sim' into testing 
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-04-14 14:40:43 -05:00
James Cotton
267e9fa87c Merge branch 'revolution' into testing 2012-04-14 14:40:11 -05:00
James Cotton
a86e75bc99 Merge branch 'revolution' into sim 2012-04-14 14:12:03 -05:00
James Cotton
deb3336729 Make sure for revolution all the GPS objects are always initialized even if 
there is no GPS port.  Otherwise connecting to relevant queues will fail.
 2012-04-14 14:02:20 -05:00
James Cotton
b7c3b1fdd1 Make the simulation provide GPSVelocity object since this is critical for EKF 
now
 2012-04-14 14:01:42 -05:00
James Cotton
ce6def870b Add feedforward component to guidance 2012-04-14 13:38:10 -05:00
James Cotton
be21ec441e Add ability to run guidance based on raw GPS velocity instead 2012-04-14 13:34:30 -05:00
James Cotton
1a98a46606 Merge branch 'revolution_ubx' into sim 2012-04-14 12:10:23 -05:00
James Cotton
5d160860a3 Fix from Corvus for gyro bias from EKF 2012-04-14 12:09:12 -05:00
James Cotton
3e2feb64cf Fix bug limiting maximum velocity desired 2012-04-14 10:49:54 -05:00
Corvus Corax
84c3705390 use gyro scale and bias in sensor module 2012-04-14 14:01:28 +02:00
James Cotton
b0ef456ccb Kickstart MPU6000 if there is no data 2012-04-13 20:29:41 -05:00
James Cotton
a0d1b00ade Cover an edge condition for the MPU6000 IRQ not firing 2012-04-13 19:37:30 -05:00
Brian Webb
4936cd8fd2 Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX. 2012-04-10 20:22:53 -07:00
James Cotton
a1351fcdbe Make the path velocity come from the waypoint. 2012-04-10 02:56:10 -05:00
James Cotton
a42d756b3e Add path navigation mode to the path planner module. I don't like how this is 
done because the mode is in the settings so can't be command from path planner.
I.e. it would be nice to be able to say do these paths then go to position hold
mode.
 2012-04-10 02:51:50 -05:00
James Cotton
dfa18eaef1 Deal with the case where path start and endpoints are the same to avoid NAN. 2012-04-10 02:49:19 -05:00
James Cotton
1aec5b8deb Add altitude control to the path navigation 2012-04-10 01:59:26 -05:00
James Cotton
26b73e3c8b Add path navigation mode to guidance. Works well in simulation. 2012-04-10 01:48:03 -05:00
James Cotton
136bbe3814 Update the EKF code to use the GPSVelocity 2012-04-09 19:03:21 -05:00
James Cotton
dbcb47e249 Merge branch 'D-Lite/ubx-parser' into revolution_ubx 2012-04-09 17:34:34 -05:00
Werner Backes
4ede7a8af6 Experimental u-blox binary data format parser. See "u-blox 6 
Receiver Description" for reference. Currently supports NAV-VELNED
message only and populates it to the GPSVelocity UAVObject.
 2012-04-09 23:14:34 +02:00
Werner Backes
422944ce29 Experimental extension to the GPS stream parser to extract u-blox 
binary data format. See "u-blox 6 Receiver Description" for
reference. GPS data stream may carry mixed NMEA and UBX data.
 2012-04-09 23:12:24 +02:00
Werner Backes
56108b5381 Introduced GPSVelocity UAVObject 2012-04-09 22:59:38 +02:00
Brian Webb
3914d22b09 Turned off watchdog timer, which was crashing on real PipX. 2012-04-07 19:56:12 -07:00
Brian Webb
e639d173a0 Create ID from a hashed CPU serial number. 2012-04-07 19:41:23 -07:00
Brian Webb
7b49a6b820 Added watchdog to radio com bridge in PipXtreme. 2012-04-07 19:12:49 -07:00
Brian Webb
f4d886de75 Added support for determining when the radio->com link is between UAVTalk packets. This is required to inject UAVTalk messages into the message stream. 2012-04-07 18:17:57 -07:00
Brian Webb
0f9f897870 Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream. 2012-04-07 18:17:32 -07:00
Sambas
d399469b88 Last push before summit 2012-04-07 14:30:04 +03:00
James Cotton
414e62f14e Revert "Disable baro updates into INSGPS for now. Seems to cause issues." 
This reverts commit 04591309770679e7b01c53a6cb54cac1c043f8b6.
 2012-04-07 00:58:36 -05:00
James Cotton
fcb9193d25 Disable baro updates into INSGPS for now. Seems to cause issues. 2012-04-07 00:58:36 -05:00
James Cotton
aa6c8a451d Shrink some stack sizes 2012-04-07 00:58:36 -05:00
James Cotton
81fcfd45c4 Some work on the code to initialize the INSGPS and allow setting the variance 
of the baro
 2012-04-07 00:37:42 -05:00
Brian Webb
56a2006fd8 Reconfigured to run on the real PipX board. 2012-04-06 18:44:31 -07:00
Brian Webb
eeb96955f9 Fixed ADC configuration 2012-04-06 17:43:43 -07:00
Brian Webb
253de47967 Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2 2012-04-06 17:37:31 -07:00
Brian Webb
bc1adb2519 Some cleanup of rfm22 driver. 2012-04-06 17:36:35 -07:00
James Cotton
345b6578b1 Fix a possible race condition for complimentary filter on L3GD20 attitude 
estimation where the accel queue wouldn't immediately have data available.
Added 1 ms timeout on queue.
 2012-04-06 13:59:12 -05:00
James Cotton
e60c70251f Slow down update rate for the altitude hold smoothed EKF 2012-04-06 13:58:46 -05:00
James Cotton
6c004678d5 Need a really big telemetry queue size on revo for object manager not to choke. 
Probably should slow down how quickly AltHoldSmoothed is set.
 2012-04-06 13:22:30 -05:00
James Cotton
ea13536da0 Take quidance settings from simulation and make the INSGPS pick up the GPS 
noise from a setting.
 2012-04-06 12:59:49 -05:00
Brian Webb
fff93910e2 RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module. 2012-04-05 20:24:50 -07:00
James Cotton
3071f77d59 Add Baro offset to the simulation 2012-04-03 10:58:48 -05:00
James Cotton
c988685293 Simulate GPS noise drift 2012-04-03 09:17:55 -05:00
James Cotton
f491c924d6 Start updating the OSX UDP simulation to use a separate thread for receiving 
but it needs two - one as a task (where the com callback occurs) and another
for the physical process stuff that doesn't need to suspend (like teh TCP
thread does)
 2012-04-03 09:17:55 -05:00
James Cotton
5d0e513678 Fix small deg/rad issue in generating gps data 2012-04-03 09:17:55 -05:00
James Cotton
df6bc4deff Enable guidance on simulation and add wind model 2012-04-03 09:16:31 -05:00
James Cotton
fdfaac6559 More tweaks to OSX simulator 2012-04-03 09:16:31 -05:00
James Cotton
ca535c2632 Fix bugs in simulated sensor data. Now works well with INSGPS. 2012-04-03 09:16:31 -05:00
James Cotton
84040d25b4 Add attitudesimulated object to capture the simulated state 2012-04-03 09:16:30 -05:00
James Cotton
09ce6e1ab4 Restore the original Revolution FreeRTOSConfig and make the osx simulation 
scheduler not start high priority tasks when they are created because I can't
reliably get the starting task to stop (because currently in a swapping mutex I
think).
 2012-04-03 09:16:30 -05:00
James Cotton
6df9691609 Bring back the original module files and remove comments from FreeRTOS 
debugging
 2012-04-03 09:16:30 -05:00
James Cotton
82a2987b2c More improvements to the osx simulation FreeRTOS port. Only tick the tick 
handler when we have confirmed the running thread has halted.  This is more
like what would happen on a single core machine.
 2012-04-03 09:16:30 -05:00
James Cotton
543500ed78 Improve the simulated sensors to produce (I think) consistent data now 2012-04-03 09:16:30 -05:00
James Cotton
0b342ea3d6 Changing the tick counter to only happen after current thread is suspended 
seems to fix stability issues
 2012-04-03 09:16:30 -05:00
James Cotton
fbd8695d7d Check in WIP for osx simulation 2012-04-03 09:16:30 -05:00
James Cotton
c1726e30e5 Make pios_tcp uses two threads - one for the socket stuff and another within 
FreeRTOS to receive the data.
 2012-04-03 09:16:30 -05:00
James Cotton
75262b400a More osx simulation work 2012-04-03 09:16:29 -05:00
James Cotton
da294384b6 Getting closer on osx simulation 2012-04-03 09:16:29 -05:00
James Cotton
a2bc7b8668 Osx Simulator Not running quickly but at least it's staying up 2012-04-03 09:16:29 -05:00
James Cotton
898a595d81 Delete old files 2012-04-03 09:16:29 -05:00
James Cotton
adad006530 More work on OSX simulation 2012-04-03 09:16:29 -05:00
James Cotton
99e246f151 More of the 7.0 files for OSX simulation 2012-04-03 09:16:29 -05:00
James Cotton
356802b5ac Update to FreeRTOS 7 for OSX sim 2012-04-03 09:16:28 -05:00
James Cotton
0d3a6d94d8 Delete some old files 2012-04-03 09:16:28 -05:00
James Cotton
491df5d130 Small update to the osx wdg 2012-04-03 09:16:28 -05:00
James Cotton
51f0c3453b More work on osx simulation engine 2012-04-03 09:16:28 -05:00
James Cotton
3c0b65fbf8 Implement a simulated watchdog to catch when the chip would have reboot 2012-04-03 09:16:28 -05:00
James Cotton
28cab678ce Simulate a more complete QC model. 2012-04-03 09:16:28 -05:00
James Cotton
9d5dbe4bfe Create stub for TCP connection of simulation 2012-04-03 09:16:28 -05:00
James Cotton
6aa1f1e344 Had some debugging outputs (logged to file) still enabled 2012-04-03 09:16:28 -05:00
James Cotton
f1aa3b658e Add a new sensor simulation mode that essentially has a gyro rate that is rate 
desired and the accel based on the current attitude.
 2012-04-03 09:16:28 -05:00
James Cotton
ce54c4205d Disable a print from the port that was causing rashes 2012-04-03 09:16:27 -05:00
James Cotton
6df2df6eec Get rid of the mutex when enabling/disabling soft IRQs. This isn't ideal but 
it seems to be triggering deadlocks.
 2012-04-03 09:16:27 -05:00
James Cotton
6adc74f6f9 Check in the fake sensor data module 2012-04-03 09:16:27 -05:00
James Cotton
dee17f8fd4 Enable task run time monitoring in osx simulation 2012-04-03 09:16:27 -05:00
James Cotton
0e815540ff Patch from Stac that processes module names without using sed. Also enable 
diagnostic stuff for simulation.
 2012-04-03 09:16:27 -05:00
James Cotton
2391385788 Remove the pauase in the idle task. Increases load but also stability. 2012-04-03 09:16:27 -05:00
James Cotton
e97c1bc016 Include the module include file before any uavo ones 2012-04-03 09:16:27 -05:00
James Cotton
dfa39b59bf Rename the pios_config file for simulation 2012-04-03 09:16:26 -05:00
James Cotton
cb7b475d03 Remove the need ot have two ways of listing the modules for simulation 2012-04-03 09:16:26 -05:00
James Cotton
76bdd09795 Rename the pios_config file for simulation 2012-04-03 09:16:26 -05:00
James Cotton
e79a6e292b Add watchdog flag for simulated sensor task 2012-04-03 09:16:26 -05:00
James Cotton
e0fbdaf9fe Move the pios_board_posix file to something more general 2012-04-03 09:16:26 -05:00
James Cotton
c8a64ccbc7 Need to use slightly different code to generate the InitMods.c function for 
simulation because of the Attitude/Revolution format.
 2012-04-03 09:16:26 -05:00
James Cotton
1763d0c72c Switch to conditional signaling. Seems more robust. 2012-04-03 09:16:26 -05:00
James Cotton
f0e84088c1 Simulated LED now flashing. 2012-04-03 09:16:26 -05:00
James Cotton
5589ca60db Check in compilation files for OSX simulation. Update to work on revolution 
tree.
 2012-04-03 09:16:26 -05:00
James Cotton
ea5b733ac8 Fix the soft timing in pios_delay. Also disable LED printing messages. 2012-04-03 09:16:26 -05:00
James Cotton
dd5a71c48d Add watchdog flag for simulated sensor task 2012-04-03 09:16:25 -05:00
James Cotton
ae2f1e95f6 Move the pios_board_posix file to something more general 2012-04-03 09:16:25 -05:00
James Cotton
5fd569829c Need to use slightly different code to generate the InitMods.c function for 
simulation because of the Attitude/Revolution format.
 2012-04-03 09:16:25 -05:00
James Cotton
5901a07eb1 Switch to conditional signaling. Seems more robust. 2012-04-03 09:16:25 -05:00
James Cotton
99b81c7159 Simulated LED now flashing. 2012-04-03 09:16:25 -05:00
James Cotton
4e64b27034 Disable matlab simulation for now 2012-04-03 09:16:24 -05:00
James Cotton
cfd92de87a Add explicit casts in manualcontrol to avoid compiler warnings/errors 2012-04-03 09:16:24 -05:00
James Cotton
7ba32f8735 Check in compilation files for OSX simulation. Update to work on revolution 
tree.
 2012-04-03 09:16:24 -05:00
James Cotton
5827e3f565 Add box around logo path 2012-04-03 03:42:37 -05:00
James Cotton
bfb0c6935e Make pathplanner use callbacks on the waypoints and their index to pick up 
changes from the GCS while flying
 2012-04-03 03:42:37 -05:00
James Cotton
c26cceb47b If the waypoint index is changed then update teh position desired. This should 
probably be done with change callbacks because currently changing the waypoints
themselves doesn't update position desired.
 2012-04-03 03:42:36 -05:00
James Cotton
6d1c36680f Scale the max velocity as a magnitude on teh vector instead of independently on 
each direction
 2012-04-03 03:42:36 -05:00
James Cotton
5b3cc4876e In simulations a higher GPS noise is required for the INS 2012-04-03 03:42:35 -05:00
James Cotton
32f76db8ae Only update position desired when you change waypoints active 2012-04-03 03:42:35 -05:00
James Cotton
ba1ade33cb Get navigation working and program hardcoded flight path 2012-04-03 03:42:34 -05:00
James Cotton
62117430cf Flip the sign of throttle in the guidance altitude control 2012-04-03 03:42:34 -05:00
James Cotton
7f226867c6 Some bug fixes for revo attitude estimation. 2012-04-03 03:42:33 -05:00
James Cotton
d4488512c0 Add RTH waypoint action 2012-04-03 03:42:33 -05:00
James Cotton
3eac69e953 Create stub for waypoint navigation 2012-04-03 03:42:32 -05:00
James Cotton
c8ceea72e6 Increase the telemetry queue size from revolution 2012-04-03 03:42:32 -05:00
James Cotton
af9f36d7df Improve the attitude initialization for all of the modes 2012-04-03 03:42:32 -05:00
James Cotton
3888d6ff69 Changed settings that makes updates smoother 2012-04-03 03:42:31 -05:00
James Cotton
319b53a342 Make sure full initialization routine for INSGPS occurs each time it is 
restarted.
 2012-04-03 03:42:31 -05:00
James Cotton
372f959c37 Refine some stack sizes 2012-04-03 03:42:30 -05:00
James Cotton
54880c83a0 Fix some task sizes and the memory limits 2012-04-03 03:42:30 -05:00
James Cotton
a83fb019f6 When in complimentary filter mode pass the GPS information straight 
through to Position Actual
 2012-04-03 03:42:29 -05:00
James Cotton
98b1a21921 Fixup: Shouldn't update gps until home location is set 2012-04-03 03:42:29 -05:00
James Cotton
7a3ec3e173 Some code cleanup to get rid of some warning messages 2012-04-03 03:42:29 -05:00
James Cotton
23625904c5 Remove the now unused ECEF and Rne fields from HomeLocation. Also reenable 
calculation of the WMM and HomeLocation from the GPS code for revolution.
 2012-04-03 03:42:28 -05:00
James Cotton
71d0180d45 Use the sensor variances from object 2012-04-03 03:42:28 -05:00
James Cotton
ce2d1f94f6 Better hardcoded constants for INS variances 2012-04-03 03:42:27 -05:00
James Cotton
de7fc81795 Fixes to the GPS LLA to NED translation 2012-04-03 03:42:27 -05:00
James Cotton
e32ab9342c Shuffle some stack sizes around 2012-04-03 03:42:26 -05:00
James Cotton
4cadb7ec0e Forgot to initialize revo settings object 2012-04-03 03:42:26 -05:00
James Cotton
337d5b7079 Enable guidance in revo. Update manual control to set the position desired 
when the switch is flipped.
 2012-04-03 03:42:25 -05:00
James Cotton
0eedaa1250 Change how we convert LLA to NED. Now it is done with a taylor expansion 
around the home LLA coordinate to avoid the conversion into ECEF coordinates.
This has the benefit of not requiring double precision math and uses less
operations.

Now we should remove the Rne and ECEF fields from HomeLocation as they are
unused
 2012-04-03 03:42:25 -05:00
James Cotton
e8cc7748af Clean up some unused variables in attitude code 2012-04-03 03:42:24 -05:00
James Cotton
a9aa6b696b Add object for setting the fusion algorithm 2012-04-03 03:42:24 -05:00
James Cotton
1911c7360d New NEDPosition object which is the transformed GPS location 2012-04-03 03:42:24 -05:00
James Cotton
e3c36ac99a Change requires for GSP updated to be set to true (wrong sign on PDOP check) 2012-04-03 03:42:23 -05:00
James Cotton
1630267324 Some small updates to 16 state INS 2012-04-03 03:42:23 -05:00
James Cotton
9e4651ab80 INS working on Revo 2012-04-03 03:42:22 -05:00
James Cotton
7e36d086de More work on INS algorithm to force constants to single 2012-04-03 03:42:22 -05:00
James Cotton
137429d92d More work for the simulation 2012-04-03 03:42:22 -05:00
James Cotton
96edea9d4b Some fixes to GPS parsing 2012-04-03 03:42:21 -05:00
James Cotton
55ee568fe2 Work on the INS algorithm 2012-04-03 03:42:21 -05:00
James Cotton
7034a45e44 Force more calculations to explicitly being float 2012-04-03 03:42:20 -05:00
James Cotton
8c8224c122 Use a bigger event queue for overo logging to avoid event system warnings, and 
add code to shortcircuit formatting a packet if it will not fit.
 2012-04-03 03:42:19 -05:00
James Cotton
e82323af32 Make revolution work with the FreeRTOS queue based MPU6000 driver 2012-04-03 03:41:52 -05:00
James Cotton
bb41bc1472 Add no for DIAG_TASKS to make file to make it easier not to miss. 2012-04-03 02:07:04 -05:00
James Cotton
d7cb232315 Add MPU6000 accel range to config structure. Also put in correct values. 2012-04-03 02:07:04 -05:00
James Cotton
3346e848e0 Attitude error timeout was 2 ms when sensors at 500 Hz. Caused lots of errors 
and overwhelmed event system.
 2012-04-03 02:07:04 -05:00
James Cotton
3f22ef8c66 Slow MPU6000 on CC3D to 500 Hz 2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6 MPU6000 accel value coming out twice as high as it should. Need to store scale 
in cfg structure to fix this properly.
 2012-04-03 02:07:04 -05:00
James Cotton
8032130769 Slow down gyro a bit on CC to give the CPU some breathing room. Might need to 
come down more.
 2012-04-03 02:07:03 -05:00
James Cotton
a960f3d07e Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code 
to take advantage of this.
 2012-04-03 02:07:03 -05:00
James Cotton
1415728762 Get the MPU6000 CC3D working. Right now the ADC system is commented out, which 
will break regular CC.
 2012-04-03 02:07:03 -05:00
James Cotton
a0b7453580 Make the firmwareIAP variable not a global 2012-04-03 02:07:03 -05:00
Stacey Sheldon
9b33be5d65 ef: pad any gaps between the BL bank and the FW bank 
The Entire Flash (EF) image for revo has a gap between
the end of the BL bank and the start of the FW bank.
This fills the gap with 0xFF and properly aligns the
FW image in flash.
 2012-04-01 22:39:27 -04:00
Brian Webb
df0a1c2ac1 Upgraded Brian-Metadata-Mods to current next. 2012-04-01 12:25:13 -07:00
Brian Webb
496a323b7f Fixed indentaion. 2012-03-31 07:59:44 -07:00
Stacey Sheldon
eab923fee0 revo: move fw image into 128KB sectors 
This saves the more versatile 16KB and 64KB sectors
for other purposes.
 2012-03-28 21:52:43 -04:00
Stacey Sheldon
f971fc14d5 openocd: update to latest git snapshot (f1c01333) 2012-03-27 00:53:27 -04:00
Stacey Sheldon
91cffb1809 f4 usb: don't skip yield from ISR 
Function was returning prior to the code that might
need to yield from within the ISR.
 2012-03-27 00:18:44 -04:00
Sambas
93ad5d2660 stuff 2012-03-26 19:23:16 +03:00
Corvus Corax
0742c88a98 enabled optional rtation of Revolution board 2012-03-26 05:25:52 +02:00
Corvus Corax
d32dd0ccd4 Fixed fmod() versus fmodf() usage in flight/... 2012-03-26 04:16:54 +02:00
Sambas
4c6ee740e2 Merge remote-tracking branch 'remotes/origin/james/revolution' into osd_test_v1 2012-03-25 14:28:25 +03:00
Brian Webb
1669f00456 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-03-24 15:21:16 -07:00
Brian Webb
23f6c8af73 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-03-23 20:49:12 -07:00
Stacey Sheldon
730defb698 f4 flash: fix flash voltage range setting in bl_helper 
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3.  Fix this to match actual VDD so we
get faster erase/write times.
 2012-03-22 22:37:31 -04:00
James Cotton
8059004755 Make sure if an event has a null handle and the queue is full we don't try and 
query UAVObjID
 2012-03-22 10:46:30 -05:00
James Cotton
c7ff2a46c7 Merge remote-tracking branch 'origin/laurent/modelview' into revolution 
Conflicts:
	flight/CopterControl/Makefile
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
 2012-03-22 02:58:24 -05:00
James Cotton
2f8049e20a Update the bootloader hw version for the mpu6000 board and make the sensor code 
and initialization respond appropriately.  Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
 2012-03-22 00:41:37 -05:00
James Cotton
6350ec575e Merge remote-tracking branch 'origin/os/features/stick-deadband-next' into next 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
 2012-03-21 16:03:40 -05:00